Pavilion dv7-5003tx replace hdd recovery disks error code OxeOefoooe please help.

have tried both recoveries hangs at 45% and goes no where

Hi,
One factor that can cause this error is replacing the original HDD with a drive of smaller capacity - if this is the case, recovery discs almost always fail to work correctly, however there isAssuming this is an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service. 

    Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service.  I would prefer to talk to someone directly.

    Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
    Regards,
    Ashutosh

  • Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?

    Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
    repeatedly tried from diffierent computers and the same error code pops up (error -1)

    That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).

  • I cannot restore my Iphone 4, I keep getting the error code 1611, please help and the Iphone keeps displaying the "Plug-In Itunes Symbol!??

    I cannot restore my Iphone 4, I keep getting the error code 1611, please help and the Iphone keeps displaying the "Plug-In Itunes Symbol!??

    http://tinyurl.com/nyj36v

  • HT1338 I receive this message ,repeatedly,when I try to update an App through App store:Error code 1009.Please help,what should I do?

    I receive this message ,repeatedly,when I try to update an App through App store:Error code 1009.Please help,what should I do?

    The App Store is not available in Iran.

  • Trying to download ios 3 getting error code 8288  please help

    Have a first generation ipod touch, trying to download ios 3 to computer getting error code 8288, please help.

    I finally solved this on my own. I installed iTunes 9.2 on my Mac. You can get it from here:
    http://support.apple.com/kb/dl1056
    Then I went to the iOS 3 purchase page here:
    http://support.apple.com/kb/HT2052
    and clicked the Purchasing link. It opens up iTunes. I connected my iPod touch G1 and did a check for system update. Miraculously, it found it this time and downloaded the update.
    No guarantee that this'll work for you, but I'm finally able to use my iPod touch again and put on some useful apps.

  • I am facing problem in starting ShellHWDetection service Error code 1075,please help

    I am facing problem in starting ShellHWDetection service Error code 1075,please help

    Shellhwdetection is a Windows service which stands for Shell Hardware Detection Service.
    It provides notifications for AutoPlay hardware events.
    System error code 1075 means "The dependency service does not exist or has been marked for deletion."
    Please run services.msc, then find Shell Hardware Detection Service, view its dependencies
    Make sure the three services are set to running "automatic" in Services.
    If this doesn't help, then run sfc to check if there're some missing or corrupted files in system.
    Yolanda Zhu
    TechNet Community Support

  • I've been having this error code 0x80090318 please help

    I've been having this error code 0x80090318 please help

    Start by looking to the right on this page under 'More like this'.

  • HP G62-357CA Recovery Disk Error code OxeOef000e

    I am trying to recover my HP notebook G62-357 and when I am on the second disk it is giving me the following error. Can anybody please help.
    "Recovery Manager could not restore your computer using the factory image. Please contact HP Support.
    Error code : OxeOef000"
    I am using Windwos 7 operting system, and these recovery disk are the original ones came with the system, were never opened or used, so I do not think any issue with the CDs itself.
    Just so you know I am out of the warranty, so can't call HP. Any help is appreciated.
    Thanks
    This question was solved.
    View Solution.

    Anytime!

  • Unable to make recovery disk-Error code:02012​3

    I just recently bought Satellite P755-S5265  and I am having trouble creating recovery discs. 
    When using the Recovery Media Creator program, I can create Discs 1 to 3, but am having trouble on disc 4.
    About halfway during the downloading sequence this error pops up:
    Failure to open file 
    D:\DATA.INI
    (Error Code:020123-F1-0000000) 
    I have gone through several DVD-R discs each having the same error.
    I've also tried using the Hard Disk Recovery utility to restore the computer to manufactory settings, but the same error pops up again. 
    Could someone please help me out?
    I appreciate an help I can get.
    Thank you in advance  

    If you're getting the error both when creating recovery media and when recovering the computer using the recovery partition, it sounds like there's a problem with the data on the recovery partition itself.
    I'd contact support at (800) 457-7777.
    - Peter

  • Unable to make recovery disk-Error code:020123-f10000000

    Hi guys 
    please help if can?, i purchased the recovery disc for my tosibia qosmio dx730 -10p loaded new windows on all perfect and tried to make a copy of the back up media so i have extra copy incase other  gets damaged its saying same thing when purchased this pc from new ,on first  blank dvd r disc it gets half way and saids ,
    Failed  to open file
    E;\boot\BCD
    ERROR CODE 020123-F10000000
    E drive is my dvd rw drive 
    i have intalled the new discs they sent me and still cant make a media back up .
    Deborah 
    Solved!
    Go to Solution.

    Hi ! Iuse memorex DVD-R. What I would do is buy a usb and create your recovery on it. That is if your machine will boot to a USB. I have a 16GB USB with my recovery on it. It would be a lot easier to use it than all those discs You can check boot sequence to see if your machine will boot from USB
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • Error Code 0xe0ef000e - Please Help!

    Sunday morning, my hard drive crashed and I tried to re-install the OS, trying both the recovery disks and loading it directly from the hard drive, only to have it "freeze" at the same point each time.
    I ran a diagnostic on the hard drive and it told me I had to replace it.
    After talking directly which HP regarding my make and model, they sent me a new drive. The tech said that the OS was already loaded on the new hard drive so I wouldn't need to use my recovery disks.
    I received the new hard drive yesterday, put it in my laptop, but when I booted up my computer, I received the message "Boot manager missing". I ran the diagnostic on the hard drive and everything was okay with it.
    The HP tech said it could be something with the connection between the hard drive and the motherboard, but I tried my old hard drive again and it was able to boot up (and begin installing the OS, only to freeze again).  
    With the new HD installed, I tried loading the OS directly from my recovery disks instead, and this is where I got the error code: 0xe0ef000e. I was about 65% done with the installation when this message popped up.
    If someone could please offer some advice on what to do next I would really appreciate it!

    Hi,
    I would definetely run the test Mumbodog suggested.  If your memory is ok, the process I mentioned will atleast mean you're starting the installation with a clean HDD.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Keep getting error code 49 please help

    Can't figure out how to print or scan keep gettign error code 49. Please help

    Although it's a better bet with a 2330 than a 2349, I'd try running a disk check (chkdsk) over your C drive. 
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Trying to update Itunes 10.7 and keep getting error code 2349 please help want Itunes back

    please help I uninstalled the itunes I already had and now have no itunes :/

    Although it's a better bet with a 2330 than a 2349, I'd try running a disk check (chkdsk) over your C drive. 
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Blue screen error code. Please help.

    late 2008 version.
    Recently my school reinstalled windows 7 but after he did that, there was some blue screen error code which only appears while running on windows and everything is fine on the mac side.
    He reinstalled windows 7 again but the blue screen error code started again. He said that it could be that my apple disc is not original which caused the error code, however last year they were able to installed windows 7 without any issue. He also said that it could be the hard drive problem.
    Another problem I have is that while on windows the hard disk drives doesn't show the mac too.
    Please help! Much appreciated if any of you can help me out.

    Unless you run a VM such as Parallels, you're not going to be able to see your Mac disk using Boot Camp. If I were you, I'd see about getting Parallels Desktop and installing Windows 7 on it. You can then inter-operate with both systems.
    Clinton

Maybe you are looking for

  • To Add a new column for ZPR0 prce in open sales order report

    HI, my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 p

  • IPhone 3.0 backup just hangs

    I have successfully installed the new iPhone 3.0 software on my original iPhone 2G. But when I go to put my iPhone in its cradle, it tries to do a backup of the iPhone, but the backup just hangs. I have to cancel the backup, and then it syncs everyth

  • Can I connect My HP All in One to Iball Nirantar UPS-621V

    I have a HP Deskjet Ink Advantage 3545e recently brought it. It is an All In One Printer, Scanner, Copier. My Question is whether if it is safe to connect the printer to an UPS. The UPS which i bought declares that I should not connect any Laser prin

  • Planned order number list

    Hi, Can any one tell me in which table system storing planned order number and which numbers getting converted to purchase requisition. Your response is apprecited, Thanks Dipak

  • Async interfaces, PI7.1 is running sync (Best Effort) scenario (SOAP Adapt)

    Hi guys, I'm facing a strange issue. I have set-up an asynchronous SOAP->FIle scenario on PI 7.1 using asynchronous service interfaces (not 3.0, but standard stateless) and the system is running a sync scenario. Is this a standard behaviour on 7.1? I