Pavilion dv7-6157cl 64bit Windows 7 Home have lost my USB2 drivers

Machine no longer recognizing USB2 drivers! The USB3 working fine. Can't get mouse or Thumb Drives to be recognized. So what do I need to do to get the drivers reinstalled once again? Thanks in advance for your help.
Loy Banks - Gramps to 11

Hey Loybanks,
Give the Microsot FixIt Utility a try. This tool has a good success rate in fixing these issues. Here is the link: Fix It
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

Touch pad light doesn't respond to fn spacebar on Pavilion dv7-7012nr with Windows 7 Home premium 64

Touch pad light doesn't respond to fn spacebar on Pavilion dv7-7012nr with Windows 7 Home premium 64. Bought it new from HP.com in October and it has never worked.

Hi,
I belive that action OR f5 is for the backlit keyboard, not the touchpad. For the touchpad (my machine is also a dv7-70xx) you need to touch the switch (rapidly twice) which is on the left corner of the touchpad. The following image shows where is the light (yellow circle) and where is the swich (red rectangular):
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have a Pavilion dv7-1050ea with windows vista home premium 32bit.Windows will not start

Windows will not start in safe mode just back to blue screen error. HP recovory disks not working even in external drive. no access to command prompt. unable to install or run programs or copy any files to the hard drive. ran start up tests Memorypassed Primery hard disc passed Hard disk passed smart hard disc passed.

I would recommend performing a system recovery.
Here is a link with the information that is needed to perform this: http://goo.gl/bbxlv
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp pavilion dv7-6157cl upgrade questions

I currently own an hp pavilion dv7-6157cl and want to upgrade my memory to 8gb and the HD to at least 1 TB. I figure I will do it when I tear my laptop appart to replace the cooling fan ( strange though - I have a Compaq (which is supposedly a lower end of the HP line but it is over 3 years older and the fan is still going strong and an even a much older and lower end Gateway with no fan problems - go figure!). I upgraded my Compaq wireless card from a G to an N and learned that HP/Compaq had white lists for certain parts that would only allow certain manufactures parts to be used. Is this true also for memory and hard drives?
As far as the memory goes - what are the specs (I know they are DDR3) but what is the speed specs of the memory used. Being that it is 6 GB I presume there is a 4 and 2 GB stick installed but I have also gone by the standard that it is faster to have both memory sticks the same capacity and speed. I also presume the extra memory would improve graphics also as the graphics share the sytem memory.
I also am going to be replacing the 640 GB HD with at least a 1 TB drive - is there a good program to clone the internal drive to use a bigger one as a direct replacement without having to reinstall everything. The cloning process would be simplified as currently buying 2.5 inch external USB 3.0 drives is cheaper than buying barebones drives (a 2.5" 1 TB Seagate drive can . I presume if I got a 2 TB external I would have to partition it into 2 1 TB partions but the way the 2 TB 2.5" external drives it would be worth the cost.
Finally - besides the above questions are there certain makes for memory and HD's that are in the "whitelist" that can only be used. Any and all info would be appreciated.
This question was solved.
View Solution.

Hi,
You've got many questions, please allow me to make some suggestions (not in order):
1. 1TB is the sweet point now in term of price/performance and no need to muck around due to some limitations. Many HSSD's (Hybrid SSD) now are very good. HP uses few suppliers and many laptops use Toshiba HDD's, you may want to play safe by using this brand.
2. For memory: your machine support 8Gb max as mentioned in its specs. From 6Gb to 8Gb you can't see or feel the difference but if you wish, keep the existing 4Gb and buy a SAME specs/brand 4Gb stick to replace the 2Gb stick. The video card on your machine can take "Up to 3061MB" max this will give you plenty of RAM.
3. Cloning existing HDD to new HDD is the best approach if you won't need to change anything (by the way, I use this many times to swap my HDD's around my test machines). Some vendors supply tool for you (or you can download from their sites) to clone. There are few good cloning software around:
http://www.techrepublic.com/blog/five-apps/five-free-and-reliable-cloning-tools/
http://www.techsupportalert.com/best-free-drive-cloning-software.htm
All the best in 2014 and good luck for the upgrade.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have upgraded my iTunes for Windows and I have lost all my apps and music

I have upgraded my iTunes for Windows and I have lost all my apps and music.
Although i signed in with my iTunes account, i can see only 5 apps (that i downloaded in the last 2-3 days), although on my iPad and iPhone i have more than 100 apps.
If i connect my devices to iTunes, the syncronisation will be made the other way, from iTunes to iPhone/iPad, so i will lose everything.
1. How can i restore these apps from the iCloud back-ups from my devices to my iTunes? Or any other method possible?
2. If you can also give me a suggestion about how to find my music playlists, that would save me from a lot of useless work on creating them again.
Thank you!

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
In the unlikely event that all the media has been inexplicably and permanently removed from your computer, see Recover your iTunes library from your iPod or iOS device.
When you get it all working make a backup!
tt2

I had to reload windows and I have lost my Adobe Photoshop Elements 12 & Adobe Premiere Elements, I have the original online PO can I still download fthis software from Adobe and how?

I had to reload windows and I have lost my Adobe Photoshop Elements 12 & Adobe Premiere Elements, I have the original online PO can I still download fthis software from Adobe and how?

stepheng
Do you have the purchased serial number? What computer operating system?
If you purchased from Adobe direct, you can get download installation files from "My Orders" at the Adobe web site under your Adobe ID and Password (http://www.adobe.com).
Alternatively, you can use the following Adobe document with links to the downloads....
Other downloads
Also, from the following web site as a tryout into which you insert your purchased serial number during installation
Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
To avoid Access Denied message, follow carefully the web site's "Note: Very Important Instructions".
Just in case note...make sure installation files are for your computer operating system 32 vs 64 bit. Two files (.exe and .7z)
Any questions or need clarification, please do not hesitate to ask.
Please let us know the outcome as your schedule permits.
Thank you.
ATR

HT3986 i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?

i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?

How did you get them to install the first time and where did you get them?
Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
Here's the Boot Camp Manual.

Inoperative "HP Support Assistant" on an HP Pavilion p7-1254 using Windows-7 Home Premium 64bit

Product Name: HP Pavilion p7-1254
Operating System: Windows 7 Home Premium 64-bit
Error Message: HPSF.exe has encountered a serious problem and must colse. Click "OK" to outomatically restart this application
Changes made to system: NONE
This question was solved.
View Solution.

When does the error occur? Is it a repeated occurance at boot or some other time? Any updates made to the system recently (Windows Update or other HP Support Updates)?
The normal solution to most problems with HP Support Assistant is to uninstall the application from Control Panel / Uninstall a program. Then download and install the latest version of HP Support Assistant from the HP Web site:
HP Support Assistant
Look for the Download HP Support Assistant heading and select Notebooks or Desktops as appropriate.
Although I am an HP Employee, I am speaking for myself and not for HP.

Problem on HP Pavilion dv7-6c90el with Windows 8 Pro x64 on Video Card

good evening,
I just finished installing Windows 8 x64 from Win7 Pro, I was able to find all drivers for my notebook, but I have problems with the video card settings.
My laptop is a HP Pavilion dv7-6c90el with two video cards, one run by the processor because it seems to me to be a part, and the other normally installed on the PC.
The cards are read by Windows as:
device 1: Intel HD Graphics 3000
device 2: AMD Radeon HD 6700m Series (Microsoft Corporation - WDDM v1.20)
the problem resides in the fact that the device should be only one support per second, or deactivated, as it will not. The video card AMD should be set to 1, and the intel 2. Only if I go to the "Device Manager" to disable the intel card, Windows works as if it were not present any video card, also installed driver is not correct because the card is an AMD Radeon HD7690M XT, the problem is that even if I uninstall this driver then always comes back. I also tried to download AMD Catalyst in the latest version, but can not find the card. It 's like the Windows is imposed only use the device 1, which, however, I can not disable the BIOS, because there is no voice. I note that under Windows 7 had no problem.
I ask you to help me because I need the performance of the video card for my work.
This question was solved.
View Solution.

Hello systemgvp,
Your notebook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forums
Good luck,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Pavilion dv7 Microphone delay, Windows 7 64-bit

I bought this notebook HP Pavilion dv7 a few weeks ago, so I tried recording with the external microphone and there is a very annoying delay which doesn't allow me to record audio properly. I haven't changed anything, it just doesn't work. How can I fix this?

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

15-f019dx downgraded from windows 8.1 to windows 7 home premium 64 bit: need drivers

Hp Pavilion 15-f019dx downgraded from windows 8.1 to windows 7 home premium 64 bit.
Stopped:
Internet driver
Wireless
USB controller
Network Controller
PCI Device
PCI simple communications controller
SM bus controller
maybe other stuff I haven't noticed?
I see others on this forum have had similar problems going back to windows 7. I tried some of their driver solutions that were posted, but to no avail. Can I get some help? Maybe some links to where I can find drivers to help me? Windows update cannot find and automatically install replacement drivers.

Hi:
Looking at the hardware specs for your model you should be able to use all of the W7 x64 drivers and software from the HP Probook 450 G2 on your model except the BIOS and firmware files.
Your model uses the Intel HD graphics driver and the Realtek RTL8188EE wireless card driver.
http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4058

How do I add additional internal hard drives to Pavilion h8-1217c running Windows 7 Home Premium

I am stymied in my effort to utilize two recently wiped and formatted Hitachi Deskstar 500 GB SATA drives I inherited from my previous HP desktop. I have installed them in my aforementioned unit, and find that the BIOS apparently accurately identifies them, but I cannot see them in Windows. Instead, in Disk Management, a disk with twice the capacity is listed, and the system does not allow me to initialize the drives, an apparent step necessary before they can be assigned a drive letter and utilized. Upon selecting to initialize, the Disk Management program of Windows presents an Virtual Disk Manager error message saying "The system cannot find the file specified," a message the specificity of which is slightly wanting. Huh? What system? Windows? The drive? Help? BTW, this particular frustration is well documented among a number of users on the internet. Why has no answer been provided yet?

Don't know what you mean about a link indicating this is an issue with the HP Pavilion h8-1217c...I posted that it is a general issue with a number of computers, many of them HP, wherein the error message I earlier cited came up. To answer your particular subsequent query, in Storage Options in my BIOS, it states that the SATA Emulation is AHCPI, not IDE...a setting I believe is appropriate in this case, since, as I had stated previously (I often find that I have stated, and clearly, previously) that the two additional drives I have installed in this box are Hitachi Deskstar 500GB SATA drives from a previous HP system. Both drives were wiped and reformatted by a local computer shop that was delighted to charge me $60 for that particular piece of heavy lifting, defending their bill by suggesting they woudl have to update the firmware as a matter of course. Upon getting the drives, they freely confessed that, of course, it was NOT necessary to upgrade firmware. I di-grease! To reiterate, both drives are recognized by the BIOS, with their appropriate ser no listed. It is in Windows 7 where the problem seems to crop up. Of course, as a Windows 7 issue, HP is supposed to support it. An earlier post in this forum...a reply to me...gave me a link to instructions on how to disengage the cage that holds the drives. I have, indicated by my posts, moved WELL beyond that point. Is anyone familiar with my issue...again, it is this...with the above stated conditions, when in Disk Management in Windows, with the drives recognized in Device Manager as one drive listed as "Volume_000," I am faced with an immediate pop up box telling me to initialize the drive, either as MBR or GPT. I chose MBR, though it matters not which I choose, since upon clicking OK, another popup box identified as "Virtual Disk Manager" tells me that "The system cannot find the file specified."
This delightful cul de sac is frequently cited on the internet, with no clear answer as to a resolution anywhere that I could find. Can someone help with this. This ought not to be so difficult, nor should HP be sending me around the bend, making ludicrous statements like "you should not be adding internal drives to your computer" or "we cannot cover this issue unless you pay a fee!" A FEE!! I just bought this system within the last three months. I have purchased several desktop and laptop systems and their accessories from this computer giant in the last 7 years! Do they give a flying-you-know-what about their customers?

Hp pavilion dv7 6197sl with windows 8.1 and drivers

HI. i upgrade my laptop to windows 8.1, tried to install all driver for all the intel and amd components from hp support site, but most of them are only compatible with windows 7.
Is there anyting i can do make these drivers working?
thanks.

Hi there @Carvin00
Welcome to the HP Support Forums!
I understand that you are looking for drivers for your notebook, for Windows 8.1. Unfortunately that model was only ever sold in configurations with Windows 7, and so HP has not made any customized drivers for it.
See the following which offers a few options: What if I Don't See My Operating System?
Other than that you can either return to Windows 7, and the supported drivers from HP, or if you really want to use Windows 8.1 on this machine, you can use the options in that link. It is certainly possible to find drivers for Windows 8.x, but there is no guarantee that those more generic drivers will work with the set of hardware in the notebook.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Hp pavilion p7-1210 PC windows 7 home premium amd quad-core A6-3620 accelerated processor

What do I need to add to my comp to have two or three hdmi ports to run video or cable TV and are some better than others ?

Hi,
Your post is under notebook forum. For desktop, you can use a double HDMI video card such as one of these:
https://www.google.com.au/search?q=dual+hdmi+video+card&hl=en&rlz=1G1GGLQ_ENAU282&prmd=imvnsfd&sourc...
you also need to make sure the PSU on your machine has enough power to run a new card.
Other option (which I'm using now) is to use a spliter, unfortunately that may not be the way you want.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Allocating more memory to graphics card on HP Pavilion dv7-6157cl

The graphics card in the laptop is AMD Radeon HD 6520G which has the 512mb dedicated and up to 4gb shared, but wondering if there is a way to change that 512mb to 1g or so dedicated and then the rest. It's pulling that 512 from my system ram which I have a total of 8g any insight would be great! thanks!

Hi, Paul:
Please see my respose to your other post:
http://h30434.www3.hp.com/t5/Notebook-Hardware/Can-you-Allocate-more-memory-to-the-graphics-card-in-...
Paul

Pavilion dv7-6157cl 64bit Windows 7 Home have lost my USB2 drivers

Similar Messages

Maybe you are looking for