Pavilion dv7 advanced boot options keyboard not working

1. Print screen key has never worked
2. In Advanced Boot Options screen, arrow keys do not function to select Safe Mode, Esc key does not work to cancel out of screen.

Hi,
Does the arrow and esc key works in Windows?
If it doesnt work in windows also then i can suggest you to try doing a hard reset and check..else could be a hardware issue
How to Perform Hard Reset
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Similar Messages

HP Pavilion 15-e092se Notebook PC keyboard not working

HP Pavilion 15-e092se Notebook PC keyboard not working . win 8.1.

Hi Nits007,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion 15-e092se Notebook and keyboard issues. Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Pavilion dv7-6c95dx USB 3.0 Not Working

As stated in the title my 2 usb 3.0 ports on the left side of my computer do not work. I downloaded the hp support assistant and it didn't find any drivers I was missing, searched online etc and couldn't find an answer. Any help would be appreciated!

Hi,
Please try the first driver of the following link:
https://downloadcenter.intel.com/product/65855/Intel-USB-3-0-eXtensible-Host-Controller-Driver
If your machine is older, please use the second one
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Pavilion dv7-6166nr USB 3.0 Not Working

My two left USB 3.0 ports aren't working. In the Device Manager it doesn't find the drivers for them. I've searched the forums, tried other drivers, tried the drivers for the latest Renesas USB 3.0 Host Controller drivers and those don't work either. None of the drivers I download seem to work including the ones listed for my laptop on the HP.com support website.
Any help would be great, thank you.
I've also tried: USB3.0_allOS_2.1.28.1_PV.exe with no luck.
This question was solved.
View Solution.

Hi:
Install the AMD chipset drivers and reboot. You want the first file listed on the webpage.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

Gt70 keyboard not working

typing on onscreen keyboard sorry in advanced for errors
keyboard not working what so ever, everything else trackpad back lites, wifi, fan etc keys all work. ive tried uninstalling scm and reinstalling to no avail... any suggestions?

Did the keyboard work before?
It just suddenly broke down?
SCM doesn't disable the keyboard in any case. Suggest you send it to MSI authorized service providers for inspection and repair.

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Hello, My white McBook (2008 or 2009) recently stopped turning on. When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound. I've tried the re-boot option, but nothing works. Please advise!

Hello,
My white McBook (2008 or 2009) recently stopped turning on. When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound. I've tried the re-boot option, but nothing works. I first thought I needed a new battery because the lights at the back are all off, but shouldn't the computer turn on once the power adapter is hooked up and the light on the Magsafe adapter shows green? I'm a computer doofus, so please be kind. Please advise! Thanks in advance.
SS

Take it in for service.

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.

Hi
A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
So I think this is the reason why the keyboard doesnt anymore.
In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
So for me it sounds like that your USB CD drive is not compatible to the notebook

Option Key not working with Boot Camp.

Hi all,
I installed Boot Camp on my new Alu Imac 24" (wired keyboard) and when booting up the option key that should bring up the boot options doesn't work. Is this a known fault with the slimline keyboard and Boot Camp??
I have tried all different combinations of power button and Option key but nothing works.
Any suggestion?
Cheers

have you updated with iMac Software Update 1.0
and latest firmware?
see here:
http://www.apple.com/support/downloads/imacsoftwareupdate10.html
Thanks,
den
.

Windows Server 2008 R2 SP1 - Safe mode not listed in Advanced boot options

HI all,
After a bad driver installation, the server got the blue screen issue.
I tried to access the safe mode and make a restore, but unfortunately the safe mode is not listed in the advanced boot options.
The only options available pressing F8 at boot are :
Repair
Normal mode
Am I missing something ?
Is there a way to launch the safe mode from the console (accessible from repair mode) ?
Is there a way to restore from the console ?
Thanks for your help, for now I am really stucked...
Olivier Tisserand

Hi again
Problem solved, I document the solution for others :
open a console from repair mode
search the real system drive, instead of the X: default of the console
inn my case D:
cd Windows/system32
SystemHardwareProperties
Advanced options
start and recovery
tick the 'show os list' with 30 sec timer
close and reboot
when the system list appears, press F8 on wanted os
Then complete Advanced Boot Options menu appears, including safe mode
That saved my customer's server
Hope that helps...
Olivier Tisserand

HP Pavilion g6 Notebook PC - Keyboard not working

HP Pavilion g6 Notebook PC - Keyboard not working
My Windows 8 - 64 bit laptop keyboard stopped working. I tried to uninstall and reinstall as explained in the support pages. but doesn't seem to work. Is it dead? what is the solution. Please help
Thank you

Hi,
While this could be a hardware issue, it's always worth trying the following.
Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
Shutdown the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Note: If the keyboard doesn't work when trying to access or navigate the Bios Menu, then this is probably a hardware fault.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion G6 - Keyboard Not Working

I am having a problem with the mothers laptop, it was working fine yesterday but when turned on today some of the keys have stopped working! Its the top row of letters, Q to P with the exception of T & Y and also the up and left arrows are not working, just wondering if anyone has experienced this in the past? I have removed the keyboard and cleaned it, made sure it was connected properly and it was. I have removed the battery, held down the power button for 30 seconds and then reinserted the battery. I have loaded the default settings in the BIOS. I have uninstalled the keyboard and the restarted the laptop. None of these have worked and I am now stumped! So any advice would be greatly appreciated. Thank You

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g6-2044so Notebook and issues with the keyboard not working. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices including the USB keyboard, as they can cause issues. I hope this helps.
Thanks.

USB Keyboard not working after running Monolingual

Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
Any help would be great!
*feeling like a bone head*

How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
I suggest trying the following:
0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS.

[SOLVED] Xorg and keyboard not working after upgrade.

Hi guys,
after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
Any hint?
How do you recover a system once it's gone like this? Many thanks in advance.
J
Last edited by ifsixwasnine (2013-12-23 13:58:16)

WonderWoofy wrote:
I wouldn't necessarily call this [SOLVED]. At best I would probably mention that you found a workaround. The addition of '(downgrade)' likely makes it fine, but just FYI for future threads. There are two reasons for this. One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
Just my 1.46¢
You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
1. Chrooted into the system
2. Wiped /boot
3. Re-installed grub
4. Re-installed linux kernel
5. Re-created grub.cfg
6. ???
7. Profit
I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

Filter option is not working in Reuse alv grid

Hi all,
Filter option is not working in alv grid properly.
if i choose one particular field for filter option .it is working .but another field it is not working though it contains different values.please give the answer.whether i have to pass filter option throuogh reuse_alv _grid or not.thanks in advance
raj

Hi raja,
1. The search/filter is
CASE SENSITIVE
2. U can give *
to search for pattern.
(IN THAT CASE, it is NOT Case Sensitive)
regards,
amit m.

Pavilion dv7 advanced boot options keyboard not working

Similar Messages

Maybe you are looking for