Pavilion DV7t-4100 hard drive upgrade fail

Hello all, thanks for taking the time to read my question. I'm stuck in the process of upgrading and HP Pavilion DV7T–4100 laptop. The machine is a couple of years old runs Windows 7 and came originally equipped with two Toshiba 300GB hard drives. The hard drives are configured for one drive,C:, to host the operating system the second drive,D:, to host data. The D drive has now run out of room. I have purchased a Samsung spinpoint 2TB hard drive in order to have more space, but what I thought would be an easy upgrade turned into many long hours and frustration, not to mention funny looks from the wife.
Here is what I've done to date:
1. Connected the new 2 TB hard drive to the computer via USB (Windows recognizes hard drive)
2. Cloned the D: drive onto the new hard drive using Seagate disc wizard (also tried mini tool partition wizard) maintaining the original partition size.
3. Turned the computer off, removed the D drive and installed the 2TB drive in its place.
4. Restarted the computer only to find that Windows would not see the new drive. Attempted to find a drive-by going to computer management /storage/disk management where was not present either. Rebooted the computer once more, went into BIOS where I discovered that it does not see the new drive. BIOS does not have an option to discover new hardware.
5. Suspecting a bad drive, bad cable, or other bad things, I replaced the original D: drive back. Everything seems to work fine. The computer sees the original D: drive through SATA and the replacement drive through USB. Leaving me where I started, still out of room....
6. Following new advice, I reformatted to drive with just a single volume and no data in it. I didn't want to drive via SATA but neither bios norwindows and see it.
My question is: How do I get the BIOS to recognize the replacement hard drive, so that windows will recognize the replacement hard drive, so that my wife won't recognize I'm an idiot?

Hi
You're welcome
Few things:
Update bios & chipset from your product download site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4317...
Now put the new 2tb hdd & check
If no joy, don't remove it - go to disk management , take a screenshot & please post it here.
Now power off, wait - then power on again - go to bios setup & boot device options to check if you can see the 2tb hdd in anywhere here.
If no joy, proceed & shut down - take out 2tb and connect it via USB , power on - go Disk Management - take a screenshot and please post it here.
Hope you have formatted previously the hdd from Disk Management by right clicking the hdd in the lower graphical console - New Simple Volume -> format, Am I correct?
Also, please post the model number/name of both Toshiba 300gb old hdd & the new 2tb Seagate hdd.
AT LAST,
Just blow out with dry canned air - the sata port of second hdd bay , after shutting down laptop completely & after doing a hard reset.
And try connecting 2tb hdd again and check.
Also, can you check if the 2tb hdd is working by testing it in another laptop by connecting via sata.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

Question - Need Advice Regarding Second Hard Drive On HP Pavilion dv7t-4100 Notebook PC

Hi,
I currently have a HP Pavilion dv7t-4100 Notebook PC, and my hard drive failed (luckily while still under warranty!). So I contacted HP support and they are in the process of sending me a replacement hard drive, so that I may install it. When I opened the back of the notebook, I realized that a second hard drive could be installed, if desired. I would be interested in doing this! My current primary drive was (and will be again) a Toshiba 1 TB Internal hard drive Serial ATA-300 2.5" 5400 rpm, model MK1059GSM. I understand (from reading a previous post) that for the second hard drive, I will need to purchase a "2nd HDD Caddy & Cable for HP dv7-4000, dv7-5000, dv7t SE" (the purchase link the tech in the other post referred to was http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345); and now I need to decide on the size (and other stats) of the hard drive that I will buy to install and used as the secondary drive. The HP customer service rep I spoke with on the phone about my primary drive replacement said that it is usually recommended to not go any higher (in capacity) than the primary drive, for the second drive, to ensure a more "stable" system (but I am not sure about the level of"technical" knowledge he has about the inner workings of the notebooks). However, from my upgrading experiences with desktop PCs, I was usually able to go as high in capacity as I could/desired; as long as the physical size of the drive was the same, and it was compatible with my system. And I usually did choose to go with a larger capacity second drive, as this was where most of my data and media files were stored (with the primary being used for mostly operating system and system files). This is my first time "upgrading" a Notebook, so I wanted to check with the techs here on the board- would it be a problem for me to go with a secondary drive larger than my primary drive's 1TB capacity? Also, are there any other factors to consider and keep in mind when selecting a second hard drive? Any advice and replies will be greatly appreciated. Thanks so much for your help with this! -Brian

You should be able to go as high as 2TB.
I also own a,(Older), DV7 notebook which has dual drive capability.
I bought my caddy from the place recommended and got everything needed including screws !
I matched the capacity in mine with an exact same hard drive and have never had a problem.
Minor battery life noticable but that was it.
Your system BIOS is what will hold you back from say a 3TB drive.
You can go to HP site and check the specs on your model and find out for 100 % sure.
HP Support & Drivers | United States
I would recommend doing what I did and match the drive exactly.
Good day !

HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive Replacement

Hello,
I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC and I had had hard drive issues from within warranty period. i.e. I purchase in 2010 and had a hard drive replaced in 2011 and again in 2012. Next time it failed in 2013 (almost 11 months apart on an average).
Last time when it failed, the warranty had expired so I thought of giving it a few try e.g. running thru bad sector fixing/writing-off softwares from seagate, Toshiba....this got me out of Smart Drive Error.
I have been using the HDD for sometime now but want to be prepared for the next round and I'm sure it'll be gone for good the next time.
Current HDD is 640GB, 7200 RPM Hardrive (replaced in 2012). HP Part# 621046-001.
When replacing, can I use ANY 640GB hard drive? Can I use a hard drive that is larger than 640 GB? Different RPM?
Any suggestions about hard drive?
The recovery discs I had received with the replacement drive did not work correctly. I had to use the first set I had created right after I purchased the laptop.
Thank you.
--Pratik Patel
This question was solved.
View Solution.

Hi Pratik Patel
According to product manual:
Your system supports SATA 9.5mm or 12.5mm , 2.5" HDDs
supports upto 2 hard drives
supports SSD too.
Single hard drive configurations supported:
250GB, 320GB, 500GB @7200RPM @9.5mm
640GB @5400RPM @9.5mm
750GB, 1TB @5400RPM @12.5mm
160GB SSD
If you want dual hard drive configurations, please click following link (user manual):
http://h10032.www1.hp.com/ctg/Manual/c02666747.pdf
But, there is not hard fast rules that only 5400rpm can be used instead of 7200rpm, which was used to replace your earlier hdd.
hope this has helped you.
thanks
Visruth
**CLICK 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH SAME PROBLEM**
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC hard disk failure imminent.

Lately this laptop has been running slow and hot. Just yesterday, I recieved an error message on my laptop (HP Pavilion dv7t-4100 CTO), saying "SMART Hard Disk Error" followed by a message telling me that the SMART hard disk check has detected an imminent failure. It told me to backup my files and then press F2 and run a hard disk test. The Quick Test Passed. The complete test gave this error.:"Hard Disk reporting failure 301 Disk Name: Toshiba MK7559GSXP Volume C:/D:/F:/)". I am sure I will have to replace the hard disk. Right now it is a Toshiba 750GB SATA hard disk drive, 5400 RPM, 2.5 inch small form factor (SFF). Can this hard drive be replaced with a Hybrid SSHD like the following:
Seagate Hybrid Drives ST1000LM014 1TB MLC/8GB 64MB Cache SATA 6.0Gb/s NCQ 2.5" Laptop SSHD
or
TOSHIBA Hybrid Drives MQ01ABD100H 1TB+8GB(NAND Flash) 32MB Cache SATA 6.0Gb/s 2.5" Laptop SSHD
If not, what would be the best replacement hard drive that you reccommend?

Hi,
You can put the second HDD on the second bay, existing BIOS can handle this BUT you need more hardware namely a caddy set (caddy & cables). You can buy from:
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My Recovery Drive is Full, How do I clean it up? (HP Pavilion dv7t-4100 CTO)

Hi, I'm not too comfortable with messing around with the inner workings of my computer, but the Recovery Hard Disk Drive has been slowly filling up for a while now. It is just about full and I was wondering if there was any way for me to clean it up/restore it without messing up my programs and files? I did it once before, but I can't remember how and I'm too scared to mess with it without some kind of instruction.
I have a USB hard drive for making back ups that I use now as a precaution if something goes wrong with cleaning the Recovery Disk.
My computer is a HP Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC running on Windows 7.
If someone could give me some advice, that would be wonderful.

Hi,
See the HP document on the following link regarding this issue - although the document refers o Vista, it also applies to Windows 7.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01508532&cc=us&dlc=en&lc=en
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hard drive test failed

Hi
My HP Pavilion G6 is showing HARD DISK IMMINENT FAILURE on startup and asks to go in diagnostics.
When I run any test it shows SMART CHECK - FAILED.
Failure ID: OTSE1F-5LC77B-XD015G-60FV03
Product ID: QA498EA#ABV
HARD DISK 1.
However, when i choose to continue startup, it loads Windows but runs very irritatingly slow.
How can i get it fixed?

Hi,
The 24 character error code for the Smart failure would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the slow loading/performance issues you describe.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Pavilion 7 Bad Hard Drive, How to reinstall HP software on new Hard Drive?

Hi, I have a 2 1/2 year old p7 1247cb running Windows 8 Pro x64, just out of warranty, and the Hitachi internal hard drive is failing (eightforums.com helped me with diagnostic tools). I am replacing the HD and want to reinstall the whole system that was on the machine when I bought it. It came with Windows 7 and a promotion for free upgrade to Windows 8, which I did. I have my Windows 8 Key Code and have borrowed the installation files for Windows 8.
This is the first time I've done this sort of replacment, and I am wondering whether it's possible, or even desirable, to get all the manufacturer-installed drivers and software back on the new HD, or should I just let the Windows install search for all drivers for me?
Until the HD started failing, this was by far the most reliable desktop setup I've ever used, and I am wary about whether the new system, with cobbled-together drivers, will be as stable and reliable as what I had with the manufacturer-installed software and drivers,
Plus, as an aside, I want to vent for a moment that it seems crazy to me that a hard drive should start failing after just 2.5 years! This bundle was sold as a gaming system (it's never used for gaming, but the specs were what I wanted), and while it gets heavy use (mostly streaming video, wordprocessing, photo/video -editing and storage), I was surprised to encounter a hardware issue only 6 months past the warranty.
Any assistance is appreciated.

Hi,
Hard drives are mechanical and do fail. It's quite common in the industry and not just with HP.
Be sure that the new hard drive is not an advanced format hard drive and is not greater than 2TB.
Back up your data to external media if you can. If not then you will need to later use for backups.
Be sure to create the external HP recovery media (this should have already been done right after you received your PC).If you don't have the external recovery media then order it from HP. HP Recovery Disks. Performing a HP System Recovery with Windows 7
Replace the hard drive and then boot up the external HP recovery media and recovery your PC back to a factory day one condition.
Now you can reinstall Windows 8 using your "borrowed Windows 8 media".
There may be other ways of installing Windows 8 but I have given you the text book method. A generic key method, mentioned by me on this forum long ago and just recently revisted by another forum member may work.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Time Machine confused after iMac hard drive upgrade

Here's the deal. I had my 24" iMac internal 250-gig hard drive upgraded to a 1-Terabyte drive. Tech guy cloned them with SuperDuper. New drive booted right up and works great. My question is regarding Time Machine, which I have set up to backup to an external drive. I assumed because old drive was cloned to new drive, Time Machine would think it was the same drive and just keep backing it up as it always has. But what happens is Time Machine just keep saying "processing" and nothing ever happens.
Is there a way to tell TM to start backing up the new drive as it always did or do I need to delete my current (1 1/2 yr. old) TM files and let it start from scratch again? I really don't want to do that. Any ideas?

As V.K. says, that procedure may or may not work.
The reason for the long preparing stage is that TM, seeing a different drive, is examining every file and folder on your system, and may do a full backup of your entire system.
Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. You'll probably see a message about a UUID error referencing your internal drive --that means TM doesn't recognize it as the same one it last backed-up.
Then you'll probably see one about a "deep traversal." That means TM is looking at every file and folder on your system to see what needs to be backed-up. This takes quite a while, of course, and you won't see anything being backed-up (xx MB of yy GB) until it's done.
If TM does perform a full backup, it may have to delete a lot of your old backups to make room for the new one. If it can't delete enough, it will fail.

Spinning beach ball after hard drive upgrade

Im running a macbook pro i7 2.2ghz 8gb ram version 10.6.8 SL
I recently upgraded my 128gb ssd to a 512gb ssd drive. I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the hard drive upgrade. Is there anything I can check or do to eliminate the freeze ups? It is VERY annoying. Or do I just need to do a fresh install on the new hard drive.
thanks in advance

Did you properly prep the drive first:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

What are my options when Disc Utility says my hard drive is failing?

Before I upgraded to Tiger on my G4 (this morning), I ran Disk Utility, repair permissions. After the Tiger installation, I ran Disk Utility again and got the message that my hard drive is "failing" in red letters, something I have never seen before.
I started up with the Installer Disk and tried to run Disk repair from that, but the red remains and I am prevented from doing a repair.
What are my options?
(I added this question to another thread, but got a little confused about the answered/not answered option when my message was not accepted as a "not answered." Anyway, John Huber1's response to my original question was helpful. I thought it was better to start a new thread.)
Thanks,
Jeanie
Power PC G4 Mac OS X (10.4.5)

Hey, guys.
I ran into a problem this morning that I've never ran into before and I wasn't sure where to write it but I thought this is best.
Here it goes...
Last night I had a power surge and when I restarted my computer, my external hard drive did not mount on my desktop. I than proceeded with restarting my computer, I relinked all my connections and I cant seem to get it fixed. I have a lot of material on my external drive that I dont have backed up (I know, a stupid move) anyways, I dont want to lose that information. Also, when I open up disk utility, the icon for my external drive is there and the partition I made for my external drive shows up also but the title of my partition for my external hard drive is not in bolded font. I tried to click the button to mount my external drive cause the specs tell me that it is not mounted but when I press the mount button, it does nothing. I than tried clicking the unmount button and than restart my computer and still nothing.
What problem am I facing and how can it be fixed?
Thanks.

How to backup data when hard drive is failing.

I think my hard drive is failing..
I booted using Install DVD, and got message in Disc Utility that "this drive has a hardware problem that can't be repaired." It mentioned I should backup data and consult apple representative..
I clicked on Macintosh HD under the red physical drive (500.11 GB Hitachi HTS) and did disc repair.
Strangely, the message went away on the physical drive when I finished. It turned back to black wording and gave green "verified/repaired" messages in the log.
I am still able to boot my macbook, although everything is running slowly... Desktop excel files take 15 mins to open.
Does this still sound like a failing hard drive?
I am trying to act fast and borrowed my sister's external harddrive/ "passport for mac", and it slowly prompted a time machine backup. It is slowly working through "8.34GB of 200.33GB"
I do not really understand what I am doing, but hoping this is the right move. Could someone explain what time machine will do or how it will help?
Is there any chance I will harm her external hd?
I am mostly worried about iPhoto and itunes library, iMovie projects,and important excel spreadsheets on my desktop. Is time machine looking after these concerns?
Any help greatly appreciated.

Where is you TM backup?
Where are your external data redundancies?
Now you will need to use very expensive data recovery experts to recover data when you could have had it safely on a $100 worth of 2 external HD.
Mechanical HD failure circumvents using recovery software.......so, now you backed yourself into a corner and needed expensive data expert recovery.
You took a wrong turn a long while back before reaching this cliff edge.
that wrong term was not having (preferably 2) external HD as a redundant data archive.

How can I browse T.M. backups made BEFORE internal hard drive upgrade?

Hi, all. I have googled and googled with no info on my particular situation. Maybe one of you can help. Here's hoping...
I have a MacBook Pro and use Time Machine to back up to a Firewire hard drive. I do not back up my System and Applications, just files. Consequently, when I recently upgraded my internal hard drive I restored all my data and settings from the original internal hard drive (not the Time Machine).
From there Time Machine began making NEW backups of the NEW hard drive, no problem, but I cannot browse the backups of the previous internal hard drive. Is there any way I can get Time Machine to recognize all of these backups as existing from the same machine and let me browse back beyond the internal hard drive upgrade?
Any help is greatly appreciated!

I think you have to browse them separately, but you should be able to do so by right-clicking (control+click) on the Time Machine icon in the dock or by holding the option key when clicking the icon in the menu bar.
Choose "Browse other Time Machine Disks" and you should see the old series of backups.
~Lyssa

My mac mini hard drive is failing. I am no longer under warranty. Do you know how much it cost to have Apple replace the hard drive? or How I can replace it myself?

MY mac mini hard drive is failing. I am no longer under warranty. Do you know how much it cost to have Apple replace the hard drive? or How I can replace it myself?

You can do it yourself. I did on my 2009 Mini
http://www.ifixit.com/Device/Mac_Mini
Also, this place sells HSDs and has install videos.
http://eshop.macsales.com/installvideos/

I'm trying to backup a my harddrive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen

I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.

Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570

Hard Drive is failed

Pavilion dv6
My Hard Drive is crash and I thinking buy a new one but I did not made Recovery Disk when my loptop was good. the recovery part is still working bacause I can use HP QuickWeb perfectly, what can I do, I can still do the recovery **bleep** from quickweb?
Please Help me.

If you live in US/CA you can usually order online from your models support page. What is your "full" model number or product number?
How Do I Find My Model Number or Product Number
Other areas can order here:
http://support.hp.com/gb-en/product/HP-G5000-Desktop-PC-series/4169547/model/4228959/document/bph071...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Pavilion DV7t-4100 hard drive upgrade fail

Similar Messages

Maybe you are looking for