Pavilion dv8 tv tuner card

i bought my pavilion dv8 several years ago for work and never paid attention to the media smart info. I was looking around and found that I could do things through my TV. i got a message saying that I needed a tv tuner card. Where do i get that?

Hi rlhope, welcome to the HP Forums. I am not sure what your notebook came with. What is the model number of your DV8? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • HP Pavilion dv8-1150er

    Hi.
    I've got pavilion dv8-1150er notebook.
    There is some connector between 2 hdd disks. According to the manual there could be tv-tuner installed, probably in some other modification of this notebook. My question is:
    Is it an mSATA connector or someting else? Can I install SSD disk in it and replace my operating system on it ?

    Hi,
    From the Wiki: "Despite the mini-PCI Express form factor, a mini-PCI Express slot must have support for the electrical connections an mSATA drive requires. For this reason, only certain notebooks are compatible with mSATA drives. Most compatible systems are based on Intel's Sandy Bridge processor architecture, using the Huron River platform. But for a mSATA/mini-PCI-E connector, the only prerequisite is that there is a switch which makes it either a mSATA or a mini-PCI-E slot and can be implemented on any platform". Therefore it's a no, it's for TV card or other PCIe device, not for mSATA.  Where is the switch, probably hardwired in the system board.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Wintv v6 application software for wintv-hvr-1800 tv tuner card

    I have recently purchased HP pavilion m8307c desktop pc in 2nd hand condition & with out Hard Disk. I have istalled fresh Hard disk in it. However, Huappague TV Tuner Card wintv-HVR-1800 is installed in it. I have downloaded software from card manufacturer web site. But during Installation it ask for valid cd of wintv v6 or highier. May hp provide me original software of the above mention card in iso formate or CD if possible?

    kpw786 wrote:
    I have recently purchased HP pavilion m8307c desktop pc in 2nd hand condition & with out Hard Disk. I have istalled fresh Hard disk in it. However, Huappague TV Tuner Card wintv-HVR-1800 is installed in it. I have downloaded software from card manufacturer web site. But during Installation it ask for valid cd of wintv v6 or highier. May hp provide me original software of the above mention card in iso formate or CD if possible?
    Hi,
    Have a look here: 
    http://www.hauppauge.com/site/support/support_pvrusb2.html
    A valid WinTV application CDROM will be needed to install this WinTV v6 version. Any WinTV-NOVA version 4x, WinTV-PVR, WinTV version 6 or WinTV v7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to this WinTV v6 version, you can purchase a new CD on the Hauppauge webstore.
    I don't think HP will provide anything as you said that the desktop is a second hand and the CD should have been provided by the original owner. In case that you don't want to spend much money there is always some torrent servers where the WinTV app CD can be downloaded from.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • TV TUNER CARD AND SATELLITE TV

    I have a new Pavilion dv6t 1100 CTO Entertainment Notebook with a built-in TV tuner card. I receive my TV signal via DISH Network satellite TV. I have a HD DVR receiver downstairs that hooks up to the main TV with an HDMI cord. All the other TVs hook up via the co-ax cable running through the walls. I am trying to hook up this laptop computer to one of the wall jacks upstairs. I ran a co-ax cable from the wall to a little adapter and then into a tiny input hole in my laptop. I then clicked on the MediaSmart icon on my computer's desktop and went through the setup. None of the sources really apply but according to my device manager, they sold me an ANALOG TV Tuner. I tried to set it up using the analog antenna setting but do not get any picture or sound even on channel 60 (where I get my DISH Network programming). My question is how do I set it up to work now, and what should I do next month when all analog signals stop? I can't believe they would sell me an analog card!!! Thanks for any help you can give me.

    I JUST BOUGHT A NEW MEDIA CENTER (M9500T) AND I WAS GOING CRAZY TRYING TO GET MY TV SIGNAL. I WAS ON THE PHONE HOURS AND HOURS TALKING AND FINALLY I SAID LOOK I BOUGHT THIS PC FOR THE MEDIA CENTER AND SOMEONE NEEDS TO GET IT RIGHT. HP WAS SAYING CALL DISH AND DISH WAS SAYING THAT THEY DID NOT KNOW WHAT TO DO THAT I NEEDED TO CALL HP. I HAD THE 3YEAR WARRANTY WITH INHOME SERVICE. FINALLY THEY SENT SOMEONE TO FIX IT. THEY SAID THAT I HAD AN ANALOG RECEIVER AND SENT ME ANOTHER ONE BUT WHEN THE GUY CAME TO PUT IT IN THE ONE I HAD WAS DIGITAL AND ANALOG. MY DISH GUY HAD IT SET TO PLAY ON CHANNEL 60 WHICH WORKED FINE ON MY OLD MEDIA CENTER (M1280N) BUT IT WOULD NOT WORK ON THIS ONE. HE ALSO SAID THAT IT WAS RECEIVING ON ANTENNA BUT THE REPAIR MAN CHANGED MY CHANNEL TO 73 AND DIGITAL ON  MY DISH AND IT WORKS. THE ONLY PROBLEM IS THAT I HAVE TO SET MY SHOWS TO RECORD MANUALLY AND IT HAS TO BE PLAYING ON 73. WHEN I SET IT UP TO RECORD ON DISH WHEN IT COMES UP TO CREATE TIMER GO TO THE FIRST LINE THAT SAYS THREE THINGS. (I AM AT WORK AND I CANNOT REMEMBER WHAT THE MIDDLE ONE SAYS BUT THAT IS THE ONE YOU USE. THE FIRST THING IS DVD AND THE LAST IS REMINDER. THE MIDDLE ONE WILL CHANGE THE CHANNEL TO WHAT YOU HAVE SET UP TO RECORD ON THE DISH AND THEN IT WILL RECORD ON YOUR COMPUTER. I HOPE THAT THIS WILL HELP YOU SOME BECAUSE IT IS REALLY FRUSTRATING. DISH NETWORK OR EITHER HP NEEDS TO GET THIS PROBLEM SOLVED SO THAT YOU CAN USE YOUR MEDIA CENTER LIKE IT IS SUPPOSE TO. I CANNOT GET CABLE OR I WOULD CHANGE OVER BECAUSE IT WORKS GREAT WITH IT. 

  • HP Pavilion DV7 1240us Express Card Slot Stopped Working

    My express card slot stopped working.
    The tech I was working with for the HP tuner card seems to think it is a driver or hardware issue.
    Please see the email string below.
    I tried all I know to get the slot to work, but I do not know which driver for it.
    Please help me.
    Thanks in advance.
    Below are the emails.
    Thanks, the problem is I do not know which driver it is.
    I looked through the entire device manager tree, and do not know which driver controls the express slot, can you send me in the right direction?
    I have an HP Pavilion DV& 1240us laptop.
    Any direction would be greatly appreciated.
    ----- Original Message -----
    [Personal Information Removed]
    Sent: Monday, September 24, 2012 5:14 PM
    Subject: RE: Ticket: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    Without inserting another device into the slot the only thing I can think of is checking device manager for the drivers for that express slot and see if they are installed or reinstall the drivers.
    If the device works on another laptop but continues to have problems on the first one then there must be something going on with the express slot on the first laptop.
    Regards,
    Jorge 
    [Personal Information Removed]
    Please include previous correspondence when replying.
    From: J[Personal Information Removed]
    Sent: Friday, September 21, 2012 5:44 PM
    To: [Personal Information Removed]
    Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    No I do not, have you had this type of issue before?
    Could it be missing or corrupt drivers?
    Is there a way to test the slot without a device, checking drivers etc..
    ----- Original Message -----
    [Personal Information Removed]
    Sent: Friday, September 21, 2012 4:41 PM
    Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    Do you have another express card device that you can plug into the laptop in question and see if something malfunctioned on the slot possibly?
    Regards,
    Jorge [Personal Information Removed]
    Please include previous correspondence when replying.
    From: JrSonic [Personal Information Removed]
    Sent: Friday, September 21, 2012 11:43 AM
    To: [Personal Information Removed]
    Cc: z1r1200cc
    Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    Yes it is connected directly, it does not even get recognized by device manager.
    No default beep when plugging and unplugging.
    IT USED TO WORK NO PROBLEM.
    It will work in another laptop.
    I am a tech by trade, so if I have to edit the registry, etc.. let me know.
    Right now I am baffled, what can I do.
    From: [Personal Information Removed]
    Sent: Friday, September 21, 2012 10:01 AM
    To: [Personal Information Removed]
    Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    Hello,
    Are you making sure to connect the 1500 directly into the express slot in the laptop and into a usb converter?
    When it is plugged in does anything appear in device manager with a yellow mark next to it? Is it being listed under sound, video, game controllers at all?
    Regards,
    Jorge [Personal Information Removed]
    Please include previous correspondence when replying.
    From: Joe [Personal Information Removed]
    Sent: Wednesday, September 19, 2012 7:18 PM
    To: Danger1
    Subject: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 App: wintv6 Country: usa [senderbase]
    Name: Joe
    Email: [Personal Information Removed]
    Product: HVR-1500 (77xxx)
    Application: wintv6
    OS: vista64
    Country: usa
    Problem description: My tuner stopped working,I used HWclear to no avail.
    The tuner works in another laptop, so it is not the hardware.
    Will not make the customary sound when plugged and unplugged.
    I am very PC savy and tried all I know, driver reinstall etc..
    Please help.
    Thanks

    Hey there,
    Can you explain more on this issue? I see by the emails the Express card slot is not functioning. What you are using in the card slot? Is the the HP TV Tuner card? If so, do you have another express card handy so you could test to see if it was the card or the slot? If your missing the driver you will need to use the HP Recovery CD to reinstall the TV Tuner driver.
    -Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • MSI TV@nywhere MASTER PCI TV Tuner card FAQ

    So you’ve just decided to add a MSI TV@nywhere Master card to your PC, you’re gonna need some help installing it then!! Before you continue, I recommend you download the Unofficial New Drivers in the other sticky, to avoid any heart (and brain!) ache.
    For best results also, you should be running at least DirectX 8.1. This is included on the driver CD, or you can download the latest version from Microsoft's DirectX Page. If you have a P4 which supports Hyperthreading, you will also need at least Windows XP SP2, otherwise you will have to disable hyperthreading in BIOS.
    You should also be in the habit of having the latest drivers for your video card, audio card and motherboard chipset; this can also avoid any future TV software failure. And make sure you regularly run Windows Update (or use the Automatic Update feature) to keep your Windows clean and up-to-date. And also remember when installing new drivers or software, if the installer suggests you restart the computer then do so, before you install anything else! Drivers not installing correctly are common causes of problems, especially with this card!
    INSTALLING THE HARDWARE
    I’m presuming you’re familiar with the concepts of building and upgrading PCs, so I won’t go into too much detail on obvious stuff (like “remove the side panel of your case, locate a free PCI slot…”).
    Fit the TV@nywhere Master card into a free PCI slot. If you didn’t get one with it, you’ll need a CD-audio lead from somewhere (the thin grey lead). If you have one connected between your CD drive and your soundcard CD-Audio In connector, then use that, any version of Windows after 98 supports digital audio extraction, so it is not needed there now. Connect one end of the audio lead to the 4 pin header on the TV@nywhere card and the other to the AUX input on your soundcard (or motherboard if using onboard). If you are installing the Mega TV Tuner in a Mega series barebones, connect it to the TV audio input on the mainboard to the rear. Don’t worry about using the 3.5mm jack plug lead to connect tv card audio, we don’t need it now, doing it this way.
    CONNECTING YOUR TV SIGNAL
    Depending on your global location, this may vary. Either way you need to connect either a aerial (ANTENNA) or cable (CABLE) to the CATV connector on the card. Someone will no doubt clarify this for me, but cable is for US-type cable, which doesn’t need a decoder box. Most people will be using the Antenna I’m guessing. Your choice of CABLE or ANTENNA needs to be remembered, you’ll need this later.
    You will not be able (or have limited success) in connecting a video recorder or set-top box to the CATV connector. Instead you will need to use the Composite or S-Video connector, and connect the audio source either directly to the soundcard or to the Line-in on the TV card.
    INSTALLING THE DRIVER
    Don’t use the driver on the CD. Download the latest driver from the MSI download page. If you are a Mega series user, make sure that Windows has been installed onto the C: drive. If not you’ll have to reinstall, and disable the USB controller in BIOS to prevent the card readers becoming the C: and D: drives. This also causes problems later.
    I would advise temporarily disabling any anti-virus programs at this point, to avoid any complications.
    When you start up after first installing the card, cancel any Found New Hardware wizards that appear. OK, so extract the contents of the downloaded ZIP, and run the PVSSetup.exe file to install the drivers. Once this is complete, RESTART your PC and the drivers will be installed for the new hardware found.
    Check in Device Manager, there should be four new hardware listed under Sound, Video and Game Controllers related to MS8606. If you see any with the (?) next to them, you might need to try the card in another slot.
    INSTALLING THE MSIPVS TV SOFTWARE
    If you wish to use other TV recording software other than MSIPVS then please feel free to do so.
    MSI do not make their own software. At least not all the time. MSIPVS is a rebranded version of Intervideo’s WinDVR software, with extra features added such as network streaming for TV@nywhere. Some people love it. Lots of people hate it. Generally most people who have posted here hate it. People who love it tend not to post if they don't have problems.  The people that hate it generally mess initial settings up, which can cause problems when they try to change it. The more patient of us will always get it eventually right!
    Install the MSIPVS software. Easy as that. Its setting it up correctly that’s the tricky part. Listed below are the main things to look for when performing initial setup. If you are unsure about anything else then read the manual! Only a complete genius would dare install any unfamiliar hardware without having the manual handy for reference - how do you suppose I learnt anything? 
    Device
    Video Input:
    "Device" is always the Conexant Cx2388x Video Capture"
    "Source" - select TV if you are connecting your signal to the CATV connector (antenna or cable), select S-Video or Composite if using these instead
    "Standard" - set this to your local TV standard, eg if in UK set to "PAL-I". if unsure, do a Google search and find out!!
    If you don't set these correctly you won't receive any channels and/or they will appear incorrectly.
    Audio Input:
    "Device" will be your soundcard or onboard audio device
    "Source" will be the connector your TV card audio output is connected to, this will be "TV" on Mega series, otherwise check!! If you connected the internal lead to AUX on your soundcard or mobo, then set it to "AUX". If you used external lead to connect to Line-In, this will be "Line-in" etc etc.
    If you don't set these correctly you may or may not hear audio while watching live TV, and you will hear no audio on recorded TV.
    TV
    Tuner:
    "Input" will be Antenna if you have an aerial connected, or Cable if you are connected to unencoded cable TV.
    "Country or Region" - if need to explain this one then maybe you shouldn't have this card!
    Channel
    Now we will see if your settings and TV signal are good! Tick the Freescan box, and then click on Autoscan. This may take a while, and for a short time it may appear that the program is doing nothing. Patience! It will soon start, and then pick up any available channels it can find.
    Make sure you have a good strong signal if you are using an aerial, otherwise TV@nywhere won’t pick up as many channels. UK viewers – just using a simple set-top aerial and signal booster, I could even receive Channel Five (or “five” as it is known now!)
    So at this point now, if all has gone well, you should be able to watch and record TV on your PC!                                     If it hasn't...

    "I've lost my CDs and MSIPVS needs a serial number to install!"
    MSI in their wisdom printed the serial key for MSIPVS on the actual CD. This serial key is the same printed on EVERY CD. Which kind of defeats the object in my humble opinion. Anyways, the answer can be found in this post: MSIPVS requires serial number!
    "When installing MSIPVS, the program hangs then shows a message saying "remote procedure call failed" "
    If you are a Mega user, you have installed Windows onto a partition other than C:. You will need to reinstall Windows, making sure you disable USB controller in BIOS, so that the card readers do not take up C: and D: drives. Upon first restart (after Windows has created partition), you may re-enter BIOS and enable USB controller before Windows continues installing itself.
    "MSIPVS installs, but when I start the application I get an error message "WinDVR has caused a problem and needs to shutdown" "
    hpkuo credits this to sizzle in his hints and tips thread, but I'll elaborate a little. The problem is caused by QuickTime codecs installed by Nero 6.3.1.15. It is unclear whether later versions of Nero were fixed, but earlier versions should be okay. "A "quick fix" is to rename the files "NeQTADec.ax" and "NeQTVDec.ax" in "C:\Program Files\Common Files\Ahead\DSFilter\"."
    Another alternative suggestion is to uninstall the codecs from the registry. I found this solution in another forum for another TV card with same problem:
    Go to Start > Run (or press Windows key + R) and enter:
    regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTADec.ax"
    regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTVDec.ax"
    The only consequence seems to be that Nero Vision can’t decode Apple Quick time format after this (something I can live with)
    If you do require QuickTime codecs to be installed, there is the Quicktime alternative available from here: http://www.free-codecs.com/download/QuickTime_Alternative.htm . Or you could just use an earlier version of Nero.
    PS if you are using a non-english setup of Windows, then the above paths will relate to how windows translates on your PC - ie subsitute Program Files etc for your local translation 
    "I have connected the external audio lead to the Line-In (blue) jack on my mobo, and set it correctly in MSIPVS, but I hear no TV sound"
    If your mobo supports 5.1 speakers but only has three jacks on rear, the Line-in and Mic jacks have been configured to act as Rear Speaker and Center/Sub outputs. If you have only two speakers, they should be connected to the green Front Speaker jack. You will need to go into your audio hardware's configuration panel / Windows Audio Device Properties to correctly configure the rear jacks.
    The other alternative is to use the internal audio connector - simply use a CD-audio lead to connect it to the AUX or CD internal connector on your mobo or soundcard. CD audio leads (the analog grey lead from your CD drive to the soundcard / mobo CD audio connector) are redundant now, as Windows now uses digital audio extraction through IDE channel. Make sure you set the audio signal correctly in MSIPVS to match this.
    "When I start up Windows I can hear a hissing like "static" / the radio is playing"
    One issue that was fixed in the latest Drivers; if that still doesn't work then the Radio volume is not muted at Windows startup. I'll let hschroed take over here:
    "Both MSI Radio and MSI PVS, unmute the TV card at program start, and mute the TV card at SUCCESSFUL program exit (remember we are not talking about the soundcard mixer state here). What this means is as long as a single program start and a single SUCCESSFUL program exit takes place, the TV card tuner will be muted, regardless of what the soundcard mixer audio source states are. If the PC is rebooted (without a PC power-off), for whatever reason, while the MSI Radio or MSI PVS program is executing (a successful exit has not been performed), the TV card will remain in an unmuted state until the next startup and successful exit of either of the two programs.
    The TV card mute/unmute status is carried over a reboot without PC power off. What this means is that after a PC power on, once the TV card has been properly muted by a start and successful exit of the MSI program, the TV card mute/unmute status should be in proper synchronization with the applications (regardless of the soundcard mixer status), as long as the PC is not powered off. (Romulus mentions computer coming out of standby. I did not test that scenario but I would expect that if going into standby means power is stopped to TV card, the effect would be similar to a PC power off)."
    "My regular TV receives all 5 channels (even Channel Five!), but when I connect aerial to TV@nywhere I only get 3"
    Common to all TV tuner hardware (not just MSI's!) is the need for a good strong signal. A moderate signal might appear okay on a regular domestic TV, but might not be strong enough for the TV tuner hardware. Consider investing in a good signal booster, or getting your aerial changed.
    Consequently, I have also learned today that TOO strong a signal is bad for TV tuner cards, as soon as I know more I'll let you know...
    "I have connected my VCR to the CATV connector, but it does not appear when autoscanning."
    "I cannot receive any channels when I connect my Sky box to the RF (CATV) connector."
    Thanks to a wonderful technology called "Macrovision" protection, many VCRs and satellite/cable boxes won't work in this way by connecting them using their RF output. Anyone who gets a result is very lucky. There's always the Composite and S-Video In connectors to try. But either way, the TV@nywhere card won't scan all their channels, you'll still have to change them manually.
    "Windows XP Media Center says that my "tuner hardware is malfunctioning or not installed" but I have installed the latest TV@nywhere drivers from MSI"
    Neither the Vox or the TV@nywhere cards are compatible with MCE2005. MCE2005 requires an analogue TV card capable of hardware MPEG2 encoding, or a software DVB-T (digital) card that already receives an MPEG2 video stream over-the-air.
    You can however still use the Vox or the TV@nywhere using the MSIPVS software outside of the MCE2005 application.
    "MSIPVS keeps defaulting my location back to Afghanistan, even though I set it to US / UK/ Sweden / Latvia / Kazahkstan"
    You will need to reinstall the drivers and software due to a glitch. Uninstall MSIPVS and the tuner drivers (with its PVSSetup.exe setup program) then restart your PC, and ignore the Found New Hardware wizard. Install the tuner drivers with the PVSSetup.exe program, then restart your PC. Then install MSIPVS, restart your PC and you're good to go again!
    "Where can I find these "Unofficial New Drivers" that people keep referring to here?"
    The "Unofficial New (BETA) Drivers" became obsolete when MSI officially released them. You can find them on the Product Support page for this card, as they are now the latest drivers. MSI TV@nywhere Master product page
    [Last edited 8th October 05 by Dr Stu]

  • Family sharing without a credit card and using I-Tunes card

    i Do not want to enter one of my credit cards into my Apple account, my wife, daughter and myself always just use I-Tunes cards to buy stuff. Is there any way to have family sharing without entering a credit card? I just don't feel secure putting it in my account.

    Hy, I live in Belgium, and there are different methods of verifying your identity and age (electronic ID card) and furthermore it is not for my children I want to set up family sharing but for my wife and me and she is certainly of legal age. On the other hand, my eldest is 14. So what is the problem with identity certification as all the Apple ID s I have created (for my wife, my mother, my stepmother and several other adults in my entourage happened without credit card, but with an iTunes card). The use of credit cards is not as common in Europe as in the US.
    what could be a solution to this problem ?

  • I have two Apple accounts the one on my phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by

    I have two Apple accounts the one on my I phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by passed I have tried to change the mini i pad account details to be the same as my computer and original apple i.d.account however, it will not allow me to do I have tried to reset the mini  i pad but not all the way to factory otherwise I would loose all my data. I have visited a genuis bench at Fountain gate however, they tell me I need to ring apple support which I will do on the next working day.

    You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
    My Apple ID

  • Software updates and I tunes cards

    I would like to know why the I tunes cards in Canada cannot be used to purchase apps or updates for the Ipod touch. I am not interested in using my visa online so I paid 25.00 for a card that says for music and more but it doesn't seem to work with anything only music. Can someone tell me if I am doing something wrong or why this is not working?

    the more is TV shows, Movies, Music videos, audio books
    you can put in your visa for a purchase then remove it from your profile or go to any bank or shoppers drug mart and get a prepaid visa or mastercard

  • I have used I tunes to download music with a paid I tunes card. I can no longer open the music store to download my music.  When I do open the music store it fades in and out, preventing me from downloading music.

    I can nolonge download music from I tunes, because the music store page fades in and out and will not remain permanent to allow me to download music with a pre-paid I tunes card.
    Also, why is it you can only download music to an I-pod from one primary computer.  Is there a method that will allow me to download music from a variety of computers.

    it only happens for previous purchases - if you have a computer you can try to download your purchase history there and then just sync them to your device - http://support.apple.com/kb/ht2519 - http://support.apple.com/kb/ht1386.

  • TV tuner Card for Mac with Component input

    Hey everyone, I was hoping someone could help me find a good TV Tuner card for my MacBook. I found a few potentials, however I've yet to find one with Component input that would allow me to play my XBox 360 at a resolution of 1050p. This is the resolution of my stand-alone monitor, and with S-Video the resolution would drop into the 400's. Does anyone have any suggestions?
    Thanks,
    Sean

    Does this work with a Mac? Looks like from the screenshots this is only compatible with Vista
    I'm also looking for something that also has a coaxle input along with the component input, so that I can watch TV!

  • Using a "tv-tuner" card as video in

    We're a television station using Skype for on-air interviews as well as with one of our employees who does traffic reports out of her home office every morning.  
    Here at the station, we need to integrate the "camera" into our system so the other person can see when we're on air and also any video that they may be referencing.  How we've done this in the past is we've used either a TV Tuner card or a video capture card and we feed video video into the card from whatever source we need.  The tv-tuner/capture cards have always been recognized within Skype.
    We're currently running version 6.0.0.126 with automatic updates turned off, but Skype is complaining saying that we need to upgrade because this version will no longer be supported.  We can continue to run this version, but we've been told there are times when we're on-air or recording an interview and we get a notice on screen that says we need to update.  Not very cool!  
    One of my coworkers said he's read where people have had better luck with USB based tuners so I just purchased a Hauppauge USB-Live2, which says right on the box that it works with Skype. Unfortunately the latest version 6.18.60.106 doesn't even recognize the tuner.
    Are there ANY tuner/capture cards that are recognized within Skype or is there a different version of Skype for broadcasters that makes allowances for another video source other than a webcam?  We can't be the only ones having this issue...

    One of the guys here was doing some research as well and found on Skype's website that that they are disabling all versions 6.13 & below.  The current version is 6.14.
    Also, he did extensive testing and found that even with the newest version of ManyCam, Skype 6.14 doesn't see that as a "webcam" either.  So at this point, if we're forced to upgrade to the latest version of Skype, there is NO option available for anyone we Skype with to see our return video.
    It looks like Microsoft is forcing our hand once again and we'll HAVE to purchase Skype TX when it becomes available.  Hopefully they won't disable the previous versions until they release this new hardware.  I can only imagine the cost as it sounds like it will supply all necessary inputs and outputs. We're currently using a Matrox Convert DVI box to get the video out of the computer and routed into our broadcast equipment.  The Matrox box costs almost $1,000, so I'm guessing that the Skype TX with the same functionality will be along the same lines.
    Time will tell...

  • USB TV Tuner Card for Macbook Air

    Dear all,
    Hello! i'm using a Macbook Air (mid-2012) 11.6". i'm in need of a USB tv tuner card. Which brand i should choose?
    Please note that, Gadmei is the most available brand in our country. is it possible to use this brand of tv tuner (USB) with Macbook air? OS is- MacOSX 10.9.2 (mavericks). Please suggest.
    Also plz tell me is there any way to use Gadmei or RealMedia TV tuner with mac without official mac driver? (i mean using EyeTV or such third-party TV app)
    Thanks in advance.
    Regards.

    Unfortunately most of these TV devices require USB2 bandwidth so are not suitable for the iMac G3. 
    The Firewire versions (EyeTV 310, 410 and 610 depending on input type) are the only options.
    The EyeTV 250 is an analogue only Tuner that does work on USB1.1 but in a low quality mode only.
    mrtotes

  • Connecting Xbox 360 to MacBook Pro through various TV tuner cards

    If anybody has knowledge about this topic, what would be the best tuner card to use to get my Xbox 360 to display on my MacBook Pro? I'm not too worried about the graphic limitations, but I definitely do not want to encounter any lag. Suggestions?

    If anybody has knowledge about this topic, what would be the best tuner card to use to get my Xbox 360 to display on my MacBook Pro? I'm not too worried about the graphic limitations, but I definitely do not want to encounter any lag. Suggestions?

  • Can we connect TV Tuner card to MacBook Pro

    I would like to buy a Karaoke system, which needs TV tuner card to be connected to a laptop.  Can my MacBook Pro be connected to a TV Tuner Card?

    I use one manufactured by Elgato.  You will need to install the appropriate software.
    Ciao.

Maybe you are looking for