Pavilion dv8t 1200 - simple pass/digital persona software won't install

Howdy,
Windows 7 Home Premimum 64 bit
Intel Core i7 Q720 @1.60GHz
Pavilion dv8t - 1200 Notebook PC
The reader worked fine for the first few months/year, however it then only started working for signing in & occasionaly for sites & gTalk. I was cool with that...annoyed, but cool. Oh, it also didn't work to sign in if I had to sign in again after the screen saver came up or if the machine went into hybernate.
Today I decided to see if there was an update or if I could get it working for something other than signing in. After installing what was most likely the wrong package, I uninstalled it through the Program Manager.
I then shut down the machine, ran CCleaner (there were digital persona errors removed...about 8) & went to install sp50048 which I believe is the correct one for my machine.
During the install it tells me the folder/files already exist, (even though I uninstalled it) & ithey do, then at the instal phase "Registering Modules" I receive the following error:
Error 1722
InstallDPPassFilter_x64.4D0EAAF1_2D33_4FFF_AA08_6...
And then in rolls it back.
I turned off the biometric devices in the control panel, ran CCleaner again, shut the machine down completely, tried installing again & had the same issue.
I turned the biometrics on in the control panel & recieve this message:
"Biometric devices are turned on, however I'm told “Windows did not find any biometric devices on this computer. You might need to attach your device or install device drivers.”
I have tried a few methods from 'solved' under both simple pass & digital persona
Thank you all for reading & attempting to help.

Howdy,
Thank you for your advice, however it did not work out.
Addressing each point in succession:
I can not get Digital Persona to install, therefore I can not interact with it hence none of the steps in the Setup and Use HP SimplePass Fingerprint Reader were available to moi.
Troubleshoot a Fingerprint Reader did not solve the issue, however I did go through the steps there so I shall describe my results in an effort to see if it helps home in on the problem.
All files used to update were pulled from the hp.com site using my Product Number.
Update the BIOS - BIOS was up to date
Enable Biometric Support (in BIOS) - Following the instructions it appears mine is always in the state: Enable
Check for Windows Support - Validity Sensor appears under Biometric Devices in the Device Manager
Update the Device Driver - (Had deleted the driver previously, so installed & updated) - Updated/Installed
Update the Access Manager - Attempted to install Digital Persona 5.1.0.175 A, but again during the install it gave me the same error (as my original post describes) & did not install.
As a final note, Windows does not see the reader in the Control Panel (large icons) Biometric devices even though it is turned on.
The reader worked fine before I tried to update it to a newer version & I still believe I installed an incorrect version of the Simple Pass software.

Similar Messages

When will Simple Pass Digital Persona Fingerprint Reader work with Firefox 6?

I would like to use Digital Persona Extension 5.0.0.4375 with Firefox.
When will there be an Update for Firefox 6?

I downloaded http://www.egistec.com/websitedownload/patch/bioexcess/HPSimPlePass7.0.74.0.zip. I deinstalled Digital Persona Simple Pass, installed Egistec Simple Pass and registed two fingerprints.
Now it still works in windows but it still does not work with firefox, because the Egistec addon "Online Accounts Extension" is incompatible in Version 1.0 ans 1.1 to Firefox 6.
Disappointing.............

Blackberry Desktop Software won't install on PC "Installation files cannot be validated."

Blackberry Desktop Software won’t install on PC “Installation files cannot be validated." KB article 28396 couldn’t get past # 4 because no digital signatures tab. Removed desktop software initially because it would not update.
Mark

I have the same problem, "Torch"
Acer,Windows XP
Blackberry Desktop will not install
RE; Cannot Vaidate
....Scanned internet, unable to find correct Formula to do so

Photosmart C4680 software won't install in Windows 8.1 64 bit

Photosmart C4680 software won't install in Windows 8.1 64 bit. The installer starts, then never does anything. I see it in Task Manager consuming resources forever:
Here is the version I am trying to run:

Hey!
Sorry for the drop-off from the thread, I must have missed your response, I apologize.
When it comes down to the actual installation and issues revolving around that; it is no longer an HP printer issue. It is an MSI (Microsoft Installer) issue.
For MSI support, I recommend for you to call Microsoft Technical Support at 1-800-642-7676.
Best of luck and let me know the outcome if you think of it. Have a great day!
I worked for HP.

HP Pavilion DV6 Notebook / Simple Pass Inactive

I have a HP Pavilion DV6 notebook. The Simple Pass program has been set up and was working for a year and all of a sudden I stopped getting the prompt to scan my finger as I accessed registered websites needing logins. My fingerprint reader still works because I am prompted to scan to unlock my laptop. I just doesn't work on website logins. Suggestions to fix???

CH_jc wrote:
The product number is A6Y60UA#ABA and the operating system is Windows 7. Operating system is the same as prior to the Simple Pass becoming inactive. No software changes or updates have been done since the problem started. Thanks!
Hello CH_jc.
Have you tried uninstalling and reinstalling the Simple Pass application? Here is a link to the latest version.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Digital persona software

I lost digital persona reader function
Please advise for recovery?

Hi,
Post back with the following.
1. The full Model No. and Part No. of your notebook ( from the service tag underneath your machine ).
2. The operating system you are using ( ie Vista, Windows 7 etc ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

New Version of Software Won't Install

I am trying to download the newest version of Blackberry Desktop Manager (710_b042_multilanguage.exe) for PC and it won't install all the way. The message keeps saying I have previous versions of the software still installed. I tried installing all Blackberry apps, re-booting the PC and re-downloading the update from the website but it still comes up with the same message. Any suggestions to correct so I can download the application?

I finally found a solution to this problem
While performing some searches, I discovered this affected BOTH Blackberry Link AND Blackberry Desktop Software, so there should have been some ... link between the two.
There are many threads around, but each one refers only to one of the two softwares, but the common problems led me to understand that this is unrelated to the software package itself, but to automatic driver installation procedures
carried out by the installer (Windows INstaller)
Here's what I found:
Affected Environment: the problems shows up on Windows 7 and other Windows version machines, when installing or upgrading Blackberry Desktop Software, or Blackberry Link.
Sometimes, you have Desktop software installed and you want to install Link, OR you have Desktop software installed, it is working fine, but you need to upgrade it (automatically) to apply some software update -
some Desktop SOftware updates are required to update some devices.
Symptomps
The problems shows in exactly the same way, during the final steps of installation of either Blackberry Desktop 7 OR Blackberry Link.
You get a warning message saying
"Some of the installation files from the previous versions of the software could not be removed. Make sure that no other application is using these files."
open the
Users\$_you_user_name\AppData\Local\Temp
directory. You may need to choose hidden files and folders in Windows Explorer to see these
Choose to sort files by creation date, scroll to the most recent files, and look for one of these
BB_Desktop.log, if you're installing Blackberry Desktop Software
OR
BBLink_Install.log if you're installing Blackberry Link software.
Open your file with a text editor, and look for part of the error message "some of the installation" using the Find feature
The cursor should stop where the error occoured.
If the line above shows something referring to InstallRimUsbDriver, there are good chances you're exactly in my situation.
If you DON'T find the same error I found, the line above the error message should give you a clue about what's going on, and you may want to share it on this forum, however the solution below may not be applicable to you.
Solution
Before you begin BACKUP YOUR SYSTEM AND CREATE A SYSTEM RESTORE POINT. The best thing is to have a full hard drive image. While the following steps are quite straightforward, additional problems on your system may be creating a
potentially worse situation. Remember to backup your Blackberry device as well and also contacts/calendars/notes as these can be affected by the first sync after Desktop Software reinstallation.
While I'm listing all the steps I took, some of them may be unnecessary, however the uninstall/reinstall of Desktop Manager or Link software should be performed anyway, IMHO.
Uninstall Blackberry Desktop Software or Blackberry Link (I chose the "erase user data" option as well).
With the device still connected, Uninstall the Blackberry smartphone driver from Control Panel / Device Manager
Disconnect the device.
Open a command prompt window, and type
pnputil.exe -e
you'll get a list of devices/drivers, scroll as needed and take note of the "oemxx.inf" entries regarding Research In Motion devices.
(xx can be a 2 or 3 digits number)
type
pnputil.exe -f -d oemxxx.inf
to remove the entries regarding the Research in Motion devices.
Chech that the operation succeded after each action.
Restart system.
At this point, yoy may start reinstalling the Blackberry Desktop or Blackberry Link Software;
You may still get the error.
Now perform again the above actions regarding pnputil.exe to see if there are still Research in Motion devices appearing.
then open the
Users\$_you_user_name\AppData\Local\Temp
directory. You may need to choose hidden files and folders in Windows Explorer to see these (you should have done this before, see above)
Choose to sort files by creation date, scroll to the most recent files, and look for one of these
rim_usb_install_log (date stamp) - choose the most recent
Open it with a text editor
In my case, I found this(20:52:07): Entering ModifyRimUsbRegKey
(20:52:07): Exit ModifyRimUsbRegKey, RimUsb.sys count: 2
(20:52:07): InstallRimUsbDriver NT
(20:52:07): DeleteAllRIMInfFiles ENTER
(20:52:07): SetupUninstallOEMInf inf fileem192.inf ERROR 0xe000023c
Look for the oemxxx.inf (in this example is oem192.inf) file on your hard drive. Delete it.
Run the installer again. This time, I went into another error
(20:59:48): DisconnectDevices: Enter
(20:59:48): DisconnectDevices: CreateInstance failed. Error=0x80070002
(20:59:48): DisconnectDevices: Enter
(20:59:48): DisconnectDevices: CreateInstance failed. Error=0x80070002
Then rebooted and the install went fine.
Keep in mind that, whenever something goes wrong with these driver related action, you get little information in the main log file, but you get some more in this file.
After performing these action, reconnect the device, it should be recognized; you'll almost certainly need to reconfigure your sync preferences, and start synching again.
Please let me know if this helped.

IPod Updater Software won't install in computer

Help! I've searched through the discussion boards and can safely say I have not seen my specific problem with the iPod Updater software posted. For 8 weeks, I've installed the latest iPod Updater software (06-26; 09-23; 10-12) that I've downloaded from Apple and zdnet sites. Like most everyone, I kept getting the message that the iPod software is too old, etc. After each installation, everything seems to have downloaded properly. I then go on to the Utilities folder, and after I click on the latest Updater software to finish the installation, my computer keeps asking me to connect my iPod, and the Update and Restore buttons are greyed out. I even went up to the Options menu to Update and Restore and that's also not viable. I've then tried to reset, restore my iPod, nothing was working. I was even on the phone with Apple for 2.5 hours (iBook and iPod helpdesks) and the newest result is that my iPod is in the disk mode; and the folder with the exclamation mark is flashing. When I checked the Console log of my computer, I found this message:
2005-11-16 22:36:48.012 Installer[365] SUIS couldn't be installed because "This software cannot be installed on this computer."
2005-11-16 22:43:09.278 SystemUIServer[196] Trying to set an iPods time, though I have no user client.
Has this happened to anyone? Does anyone have any working solutions? Should I have posted this on the iBook site? I'm at my wits end.

I am experiencing the same problem. I cant seem to get the ipod updater to actually update my ipod.
itunes tends to freeze my system, even though Ive had a full format and reinstall. I think the trick is getting itunes v4.9 though I am struggling to find this version as well...

Downloaded Digital Editions but won't install?

We are trying to use our Ebooks from our library.
Using our Home computer- which has Microsoft Windows XP, Home Edition, Version 2002, Service pack 2.
We have a Pentium 4CPU 1500MHz, 1.49GHz. 512 MB of Ram.
We use "avast" and have a "firewall" as well.
The EXE.file wouldn't run.
We had Adobe already in our system previously, however thought it might have upgraded by using the link our library provided. We also had the flash player.
So we went to the link that was provided by our Library see below.
http://hpl.lib.overdrive.com/5DE8E161-0C85-4862-B995-5FF6BE2E4895/10/3 81/en/Default.htm
Downloaded:Download Adobe Digital Editions
WE FOLLOWED THIS:
Getting Started
Follow these steps to get started with the Adobe Digital Editions:
· Download Adobe Digital Editions ›
· Run the installer and follow the on-screen instructions.
· Once installed, open the Getting Started eBook for an overview of the application.
THEN WE DID THIS:
Adobe Digital Editions 2.0 Installers
Locate your preferred platform and click on it to download the installer. Then run the installer on your machine to install Adobe Digital Editions.
Download Windows (5.61 MB)
AND THEN WE DID THIS:
Additional Downloads
Getting Started with Adobe Digital Editions eBook
The Getting Started eBook is pre-installed with Adobe Digital Editions 2.0; however, it will not be installed if you install as a standard user (non-admin user). If it is not installed or if you happen to remove it, you can download it using the following link.
Download Getting Started with Adobe Digital Editions (EPUB, 55 KB)
THEN WE TRIED TO RUN THE PROGRAM AND GOT THIS RESPONSE:
"Adobe reader could not open [(I've tried a few samples before trying the book I ordered from you)] because it is either
not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't
correctly decoded)".
I did find out that we must have the Digital Editions working "BEFORE" the library sends us the download for the book we
requested.
However, we still should have been able to "TEST" using the "Sample books".
What are we missing???
Can you help????
Joanne.

It will be a bit slow, but you will probably find the older version v 1.7.2 of ADE will run fine on your old Pentium
if that is more convenient than using the other one.
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Install software won't install...ipod doesn't connect

Hi,
I just bought a new ipod mini, i have a laptop, and connect w/usb cable. I followed the instructions, and did not connect the ipod until the software said to connect it to see if it needed to be updated, well, i plug it in, and the apple logo comes on, and that file folder question mark, and on the intall screen it doesn't recognize that the ipod is connected, I've tried all of the steps to reboot, delete software, restart, reinstall, but i can't get past that step, i bypass it, and install the rest of the software and itunes, and the same thing keeps happening when i connect the ipod. it will keep beeping, and will say "do not disconnect" and then the file folder comes on, and sometimes it turns off and on. i have no idea what else to do...someone please please help me. feel free to post here or email [email protected] thanks!

Incidently, I too have tried switching from the USB 2.0 hubs in the front to the rear USB's and nothing is happening. I have followed the iPod for Windows software instructions to:
"connect iPod to see if it needs formatting"
when I connect the iPod shuffle the software notices that the "iPod is connected, please wait while the system recognizes the device" and I have even let the program run "waiting for iPod" for HOURS............ and nothing is happening!!

Officejet Pro 8500 a909g software won't install in widows 8

I have a HP Deskjet Pro 8500 a909g printer. It's worked great on XP and windows 7. On Windows 8 I can get the printer drivers to install, but not any of the HP software. I have done a L4 uninstall, stopped all the TSR non-windows applications, cleaned all temp files/folders, disable the firewall and anti-virus and downloaded the version 14.8.0 Product installation software. When I execute the Product installation software, it completes the "extraction", then simply disappears. The app is still running, because I can't delete the file, but no screen or window comes up.
I have also tried the Install wizard and the HP Print and Scan Doctor, both failed saying they don't support this device after processing through the first 3-4 steps.
Has anyone successfully installed this software on Windows 8? Any help or thoughts would be greatly appreciated.

Hi pepps
I understand you are unable to install the printer on the Win 8.
The downloaded driver goes to the downloads folder, try and run it from there.
In our lab this where it extracted to but yours might be different.
Go to desktop, touch windows key and x key, select file
explorer, downloads folder. Double click it to run the
extracted file. (ojaio6500e709fullwinww140)
Run extracted file separately.
Go to desktop, touch windows key and x key, select file
explorer, c:, users, your computer name, app data, local,
temp 7zs4d1a, (Officejet 6500) open the setup.exe to run
the installation.
Let me know if that works.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

After reinstalling new HP all in one, all of software won't install

After spending hours on telephone w/ help desk at HP, they were actually very helpful, they determined that maybe I removed something from my Mac that is keeping the HP program from installing everything it needs. I have tried the disc that came w/ the printer and the dowload from the website. I don't know what I may have accidentally removed from my Mac. I had to uninstall then reinstall the printer and didn't use the uninstall option - didn't realize it was there-I did it manually. Mac helpdesk of course is saying Hp needs to figure it out but everything was installed and running fine before I removed it and tried to reinstall.
Anybody ever encounter this or happen to know what I might be talking about???
Any suggestions would be soooo much appreciated
Thank you
Message was edited by: jennweb

Hi jennweb, and a warm welcome to the forums!
Can't say for sure, but HP's uninstallers are more or less famous for NOT uninstalling everything, I'd search online for how to manully remove your hp drivers.
Do you get some message saying it can't insta;;? Or does it just not work?
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

Desktop Software won't install

The disc gives a message of 'Initializing' along with a status bar, but the software never opens. Is there any help out there?

Do you have sufficient permissions to install software? If it is a company laptop, this is often locked out.
You can try bypassing the splash screens - don't have the CD autorun (Hold your shift key down when inserting the CD and keep it pressed for about 5-10 sec until the CD drive quiets down), then explore the CD and go to D:\files\exec\bbinstaller and run the Setup.exe from there.
posted by DigitalFrog
WARNING: May contain traces of nuts.

Desktop Software won't install on Vista

I'm having trouble installing the Blackberry Desktop Software onto my Windows Vista computer, how can I solve this issue?

Graeme wrote:
I am having the same issue with VISTA I have tried downloading v4.3 from the website but to no avail. I have received the error unable to access VBScript runtime..... any ideas
I'm having the same problem every time I try to install BB Desktop software 4.3. I have even tried to run start.exe as administrator, even though I'm logged in as administrator, and I still get the error. I think it was error code 2738 if I recall correctly.* edit Sovled the problem. I goggled the error code and and after several sites I found the answer at http://www.nitropdf.com/kb/article.aspx?id=10106&cNode=3D8W4P
Message Edited by mmyers on 06-13-2008 10:52 PM
Marc Myers
How-To Advertise Specialties

Mac App Store problems (some software won't install)

Recently, I've been having problems with updates being installed after they were downloaded. Oddly enough, all the updates I am having problems come from Apple. the first was the Epson Printer driver update that came out about a month ago. It downloaded fine, but after the download, the software window says the software is installing, but, for days on end, the progress bar shows it stuck at the beginning of the installation process. Now, I am having the same prolem with the Raw Camera update. Everythng else that needs updating works fine, including the Mavericks.2 update, but these programs refuse to install.
Early 2011 15 " MBP (2 GHz i7, 4 Gig RAM) running OSX.9.2.
Oddly enough, I have a mid-2010 iMac (27", 3.6 GHz i5, 12 Gig RAM) running 10.8.5, and both programs updated perfectly with no problems. Anyone have any ideas of what is going wrong, and what I can do to fix it?
Thanks in advance.

Thank you for the response, but I don't see how to get to downloads from the Apple support site. Selecting "Software Update" from the Apple menu takes me to the App Store. Going to the Support page, I don't see any way of downloading files. It seems that has been all moved to the Mac App Store now. If there is a way to download files from the Apple Support Site, I would certainly like to know how to do it, as I can't figure out how.
Thank you in advance.

Pavilion dv8t 1200 - simple pass/digital persona software won't install

Similar Messages

Maybe you are looking for