Pavilion G4 - Diabling Touch Pad is not retained after reboot or Sleep

On a Pavilion G4 running Windows 8, when I double touch the upper left of the touch pad to disable it, it does so and acts accordingly.  However, after I close the lid to put it to sleep or re-boot, the system comes back up with the touch pad enabled.  What can I do to have this work correctly (and have it be disabled after sleep or reboot)?  Thanks.

Try this: Control Panel-->Mouse-->Device setting, choose [Disable] , then [ok] should permanentely disable touchpad function. Thanks!
ET1111. I work for HP; I'm here to help

Similar Messages

  • How to fix "OS X Lion user's custom preferences are not retained after reboots"?

        How to quickly fix "many of user's custom preferences from within OS X Lion 10.7.x and/or MtLion 10.8.x are not retained after Mac reboots and/or log-offs"?

         If many of the user’s custom preferences from within OS X Lion 10.7.x and/or Mountain Lion 10.8.x are not retained on Mac after reboots and/or log-offs, then implement this following QUICK FIX procedure:
    Login to user’s OS X login profile… access & select the Finder pull-down menu Go… next select Library (just user’s Library only available when holding-down the Option key here within OS X Lion + MtLion)… find-select-and move the Preferences folder out from the overall user’s Library to the user’s Desktop area for temporary safe keeping.  Then log-off user and/or reboot Mac… log-in as user, and reset all user’s custom preferences (System Preferences, Dock icons, etc. [OS X system now recreating all user’s login profile preferences]) according to their previous Desktop setup.  Finally reboot after making all new user preferences setting changes… log-in again as user, and check to ensure that all user custom preferences now stays retained.  If all OK, then you may move the corrupted Preferences folder from the user’s Desktop area to the Trash for final deletion.
    *NOTE: Is this above-written QUICK FIX completely acceptable to Apple's OS X Lion + MtLion troubleshooting standards?  So far this solution appears to have fixed a recent iMac user's issues with custom preferences.

  • [SOLVED] Console Font Not Retained After Reboot

    Hi, again.  Happy to report that I successfully installed Arch Linux last night, with no problems whatsoever.  Thanks to those who addressed my concerns.  Still reading up on the package manager, user and group management, etc.
    Anyway, one of the first things I noticed is that the console font gets reset after every reboot.  I need to manually type "setfont Lat2-Terminus16" - which works just fine, except for the annoyance in having to do that each time I boot up.  My /etc/vconsole.conf has the following:
    KEYMAP=us
    FONT=Lat2-Terminus16
    Following the solution described here:
    https://bbs.archlinux.org/viewtopic.php?id=155876
    I added 'consolefont' (without quotes) to the beginning (first item) of the HOOKS line in /etc/mkinitcpio.conf.  Then I rebuilt the initramfs by typing "mkinitcpio -p linux".  Again, no errors during the rebuild.
    I've rebooted several times, but there's no change...  my selected console font is not retained.
    Can anyone point what I'm doing wrong, or offer ideas?  Thanks.
    Last edited by R0b0ty (2013-03-06 16:52:42)

    Have you tried
    If the fonts seems to not change on boot, or change only temporarily, it is most likely that they got reset when graphics driver was initialized and console was switched to framebuffer. To avoid this, load your graphics driver earlier. See for example KMS#Early_KMS_start or other ways to setup your framebuffer before /etc/vconsole.conf gets applied.
    https://wiki.archlinux.org/index.php/Fonts#Examples_2

  • Touch-pad "click" not working after waking-up from

    Hi,
    I hope the subject is kind of a give away. Basically, I've finally gotten around to sorting out ACPI for my Dell 9600 laptop. I've configured, via KLaptop, for the machine to go into Standby when I close the lid. This works ok except that when I resume, my touchpad isn't as fully functional as before. In particular, I can't "click" with the pad by tapping on it, as is the normal way I use it.
    I can't imagine why this suddently stops working. Does anyone have any clues? Below is the relevant section of my acpid log, if it helps.
    Cheers
    [Mon May 16 22:05:27 2005] received event "button/lid LID 00000080 00000001"
    [Mon May 16 22:05:27 2005] executing action "/etc/acpi/handler.sh button/lid LID 00000080 00000001"
    [Mon May 16 22:05:27 2005] BEGIN HANDLER MESSAGES
    [Mon May 16 22:05:27 2005] END HANDLER MESSAGES
    [Mon May 16 22:05:27 2005] action exited with status 0
    [Mon May 16 22:05:27 2005] completed event "button/lid LID 00000080 00000001"
    [Mon May 16 22:18:13 2005] received event "ac_adapter AC 00000080 00000001"
    [Mon May 16 22:18:13 2005] executing action "/etc/acpi/handler.sh ac_adapter AC 00000080 00000001"
    [Mon May 16 22:18:13 2005] BEGIN HANDLER MESSAGES
    /etc/acpi/handler.sh: line 36: /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed: Permission denied
    [Mon May 16 22:18:13 2005] END HANDLER MESSAGES
    [Mon May 16 22:18:13 2005] action exited with status 1
    [Mon May 16 22:18:13 2005] completed event "ac_adapter AC 00000080 00000001"
    [/code]

    I think you have to toggle the synaptics driver... if you check the output from X you should have like "Synapitics Device On/Off" if you switch to a console... I'm not sure how to control it, but I have a feeling that shut off and never restarted

  • U310 Touch pad functions not working after opening Office 2010

    Hey, I've been having problems with loosing my touchpad capabilties after opening office. It doesn't come back until I restart the laptop. I've read many threads and updated my touchpad driver to the latest one I could find for my latop. Any other solutions? Thanks
    -Ash

    Touchpad was working fine until I install office 2010. A week later, the touchpad is working real funny and not responding at times. I tried restoring a couple of time and problem is still there, Uninstall Office 2010 and problem is solved.

  • Desktop wallpaper on external drive not retained after reboot

    Hi all,
    On rebooting my Late '12 iMac, the desktop wallpaper always reverts back to the default Yosemite one. The wallpaper is stored in a folder on my USB 3.0 ext drive, and when the desktop appears the icon is there for the external drive and ai can browse and re-set the wallpaper.
    Also, possibly related, I have an icon for Steam on my Dock, which becomes a question mark upon reboot as if Yosemite can no longer find the app. Steam is also stored externally. However like above, I can click the icon and the Mac is able to see and launch steam no problems, and the question mark then reverts back to the steam icon.
    The iMac has been upgraded by myself so that internal drive is a Samsung Evo 840 SSD. As crazy as it sounds I almost think that the Mac is booting (which takes around 6 seconds from grey Apple to logon screen) faster than it is reading the external drive. But what is weirder is that the logon screen has a blurred version of the correct wallpaper behind it, which flicks the default Yosemite one when I login.
    Any ideas?

    dannytheone wrote:
    On rebooting my Late '12 iMac, the desktop wallpaper always reverts back to the default Yosemite one. The wallpaper is stored in a folder on myly,  USB 3.0 ext drive, and when the desktop appears the icon is there for the external drive and ai can browse and re-set the wallpaper.
    Also, possibly related, I have an icon for Steam on my Dock, which becomes a question mark upon reboot as if Yosemite can no longer find the app. Steam is also stored externally. However like above, I can click the icon and the Mac is able to see and launch steam no problems, and the question mark then reverts back to the steam icon.
    The iMac has been upgraded by myself so that internal drive is a Samsung Evo 840 SSD. As crazy as it sounds I almost think that the Mac is booting (which takes around 6 seconds from grey Apple to logon screen) faster than it is reading the external drive. But what is weirder is that the logon screen has a blurred version of the correct wallpaper behind it, which flicks the default Yosemite one when I login.
    Any ideas?
    It doesn't actually sound crazy, except for the thing with the blurred wallpaper which does sound odd. The easy way to test it would be to move your preferred wallpaper to your boot drive to see if it loads at boot. I'm assuming it will. In my limited testing of Yosemite, the wallpaper choice sticks, as it should, but it's on my boot drive.
    Have you noticed if the problem of drives being improperly ejected when system wakes from sleep has been corrected in Yosemite?

  • Touch pad is not working

    【help】
    T440p Windows 7
    bought it in this March.
    touch pad is not working.
    "ThinkPad UltraNav Pointing Device  is unenabled " is said by  "Lenovo Solution Center"
    when open the device manager, Ultranav device can not be found in "Mouse"
    the driver of the  ThinkPad UltraNav is intalled well by  "Lenovo Solution Center"
    I can not use my touch pad even restart my PC.
    BTW, sometimes the keyboard can not working suddenly.
    in that case, when i restart my PC, the keyboard becomes woking.
    Best wishes, any idear will be welcomed.
    Thanks in advance.

    Hi Epco_yangchao,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing an issue with Touchpad on your ThinkPad T440p.
    Boot the system in safe mode and work for a while to confirm if it is working in safe mode.
    Uninstall UltraNav application for Control panel – Program and feature option and restart the system and check if you’re able to see any adapter in Device Manager under Mouse adapter.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Keyboard and Touch pad is not responding

    I have one Lenovo G450 with Windoxs 7 which was working fine. But suddenly I am having some strange behavior.
    Like, when I am starting my laptop then its keypad or touch pad is not responding. After couple of shut down/restart (can't figure out how many times, actually its not constant) the keypad or touch pad is responding and working fine. Again when I shut down and try to start sometime later then having the same problem.
    Please help.
    --Bashar

    Hi
    Welcome to Lenovo Community
    Please check the following options .
    Try entering the Bios using F2 Button , If you are able to enter Bios
    Load Setup defaults .
    Then try to Load system to safe mode by pressing F8 key & check if you are able to use the Keyboard and Mouse
    If it is working fine then try to uninstall the devices from device manager . Restart the system and boot to normal mode
    and verify the keyboard & touchpad is responding .
    Hope This Helps
    Cheers!!!

  • Mouse touch pad will not toggle off

    HP G60 laptop, OS - Windows 7
    My mouse touch pad will not turn off when the on/off button is toggled. This is a recent development. Is it possible that the button has been disabled, and if so, how can I reset it? 

    traininggap wrote:
    Hi. "This is a recent development". I'm quite unclear. Was this working previously? 
    Yes. Usually, I work with an external wireless mouse, so prefer to turn the touch pad off to disable it (and avoid any spurious effects caused by accidentally touching it). Since just yesterday, when I operate the on/off button, nothing happens. It's possibly a hardware problem, but I figured someone might know if it was a settings issue.

  • Cannot load the recovery media since my keyboard and touch pad do not work

    My labtop Toshiba C55D-A5392 may have a virus issue which cause the keyboard and touch pad do not function.  initially only a few keys don't work...after a couple days most keys don't work and now no keys are working and the touch pad failed too. I can't even load up windows now.   I bought a recovery media from toshiba and try to reset the laptop to factory settings.  I received the USB drive media from Toshiba, but I cannot load it since I cannot get the laptop into the bios (since my keyboard does not work).  Can anyone help me to resolve this issue?

    Try pressing the fn key and f2 to reach bios
    or
    try a usb mouse from your desktop
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • My touch pad does not work only when using Safari browser. The screen was grey. Help!

    My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
    Someone please help.
    Thanks

    I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and delete cache, history and cookies.

  • After installing fedora in my laptop touch pad is not recognizing by OS

    am having lenovo 3000 g430 , yesterday i installed fedora 7 in my laptop.
    installation was successfull but the touch pad is not recognizing , is there any way to resolve this issue
    thanks in advance

    Kenz,
    Here is the link for the touchpad driver for fedora
    Have you tried to enable "gsynaptics touch"? 
    You will have a file called xorg.conf in the etc directory '/etc/X11/xorg.conf' .It should look something like this 
    # Xorg configuration created by system-config-display
    Section "ServerLayout"
    Identifier "single head configuration"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "InputDevice"
    # keyboard added by rhpxl
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105+inet"
    Option "XkbLayout" "us"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "radeon"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Add this section below the keyboard but above the video card:
    Section "InputDevice"
    Driver      "synaptics"
    Identifier  "TouchPad"
    Option      "SendCoreEvents"
    Option      "Protocol" "auto-dev"
    Option      "SHMConfig" "on"
    Option      "Emulate3Buttons"
    Option      "VertTwoFingerScroll" "false"
    Option      "HorizTwoFingerScroll" "false"
    Option "HorizScrollDelta" "0"
    Option "TapButton1" "0"
    Option "TapButton2" "0"
    Option "TapButton3" "0"
    EndSection
    and then add this to the server layout section just below the line for the keyboard:
    InputDevice    "TouchPad" "CorePointer"
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Touch-pad is not pressed. How can I fix it?

    Touch-pad is not pressed... How can I fix it? Can I visit any Apple store? I'm in East Lansing (postal code 48823). Could you recommend the closest repair store to my location?

    You can use the following to find Apple Stores and Authorized Service Providers: https://locate.apple.com

  • My Hp Pavllion dv7 keyboard and touch pad will not work

    Hi. My Hp Pavllion dv7 keyboard and touch pad will not work. Been going on for a few months now. Read in the support forum that replacing the battery might help however it hasnt. Ran updates for Windows Vista and Microsoft Security Ess. Boots up just fine however unable to place in my password to get to my user profile and always have to work from guest......unless I have a USB keyboard handly at the time. I use a USB wireless mouse as well.
    Please help and thank you

    The keyboard and mouse (touchpad) are separate devices which could go bad at the same time but that would be a huge coincidence. I would try reseating the ribbon cables to the motherboard for both. Here is the Service Manual:
    Manual

  • AM is not retained after deployed the custom pages

    Hi,
    I have two custom pages, Create(page1) and Select Jobs(page2) pages.
    In Create page I've a button called Populate Jobs, Once I click the populate jobs button it will navigate to another page. In page2 I'll select list of jobs using multiple selection.
    Once multiple jobs selected I'm validating those jobs(lines) already added to the page1 when click submit button (available in page2).
    Both pages have same AM and I'm retaining AM when I move from page1 to page2. In page 2 if click submit button I try to get all the existing lines which is arendered in page 1.
    But i'm getting zero count but records are there. It is working very fine in my machine before deployment. But the AM is not retained after deployed to apps.
    Details:
    OA Extension
    10.1.3 (Build OAEXT_MAIN_NT_100429.1954.1314)
    My Jdev Version
    10.1.3.3.0
    EBS - OA Framework
    12.1.3
    EBS- Oracle OA Extension
    10.1.3 - build 1313
    please suggest me do I need to check any profile option to set AM State or any other solution for this.
    Thanks in advance,
    SAN

    Hi.
    Try adding some debugging statements using write diagnostics .
    Check to see if VO is getting cleared on loading 2nd page.
    Alternate solution would be to add these line id's of the selected lines before forwading.
    On 2nd page, get these Id's and do whatever necessary.

Maybe you are looking for