Pavilion G6-2005ax, unable to install wireless drivers and bluetooth problem.

Hello, i installed windows 7 ultimate 64-bit on my HP Pavilion G6-2005ax after formatting. I downloaded and installed all of my drivers from here . But 'Ralink 2011 802.11 b/g/n WiFi Adapter ' and 'Ralink 802.11 b/g/n Wireless LAN Adapter Driver ' fails to install. There is yellow symbol on 'Network controllers' in Device manager. I could succcessfully install the bluetooth driver but i cant search any device, neither it gets discovered. Please someone help. Thank You.
This question was solved.
View Solution.

Hi:
According to the hardware ID you posted (USB\VID_0CF3&PID_311D&REV_0001), that decodes to an Atheros bluetooth radio.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Paul

Similar Messages

Qosmio F10-136 - Unable to install any drivers

I have a Qosmio F10-136.
I have recently formatted the hard drive. Since I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available online from the Toshiba website but I have been unable to install any drivers except the wireless LAN. Most driver setups refuse to run at all, some seem to install the files, but the driver is not detected.
Please advise.

> 1. Sound device not working still - When I install the audio effect driver (i.e. toshiba virtual sound), there does not seem to be any effect even though it is installed. Then, when I install the SoundMax Audio System, it gives me an that the driver does not exist.
What do you mean exactly by does not seem to be any effect. Can you hear the sound coming from the speakers? Are there any yellow exclamation marks related to the sound card? If not then the sound card driver has been installed properly and the sound should work!
> 2. I cannot figure how to install the LAN driver.
Where is the problem? Download the LAN driver, unzip the package, access the device manager, choose the unknown device (LAN card), point to the driver files downloaded from the Toshiba driver page and finish the installation.
The LAN card should be recognized properly.
> 3. Same with the TV tuner drivers; there is not setup file.
As mentioned above; you can install the drivers in device manager. Choose TV tuner in device manager (possibly marked as unknown device too.) point to the TV tuner driver files and finish the installation.
> 4. During the windows setup, I had created 3 drives, but I cannot access the drives D & E. When I try to access them, windows asks me to format them, but it gives me an error when I try to do so. Also, the hard drive is not shown in the disk management (not even C drive), so I cannot do anything. Although, the hard drive is shown in the device manager.
If other partitions have been created on the HDD then this should be visible in disk management. I dont believe that you cannot see even the C partition. In my opinion you didnt check this correctly.
Access the disk management (MY Computer, right click, manage). Choose Disk Management. There you should see the HDD and CD/DVD drive.
If the partitions have been created but not formatted then you would see just a free space.
Click right on this space and you could either format this or could delete the partition.
PS: I recommend using a 3rd party tool like Partitions Magic in order to create the partitions on the HDD (Win XP)!!!

Unable to install XP drivers for Deskjet 3650 on Windows 7

I have a HP Deskjet 3650 that is connected via USB to my main computer running Windows 7. I can print without problems I am having problems sharing this printer with 2 other computers running Windows XP. I have downloaded the drivers for XP and extracted them onto the Windows 7 computer.
On the properties of the HP Deskjet 3600 Series printer, I have clicked on the Sharing tab.
Share this Printer and Render print jobs on client computers are both checked.
When I click on Additional Drivers, only X64 is checked and says yes under installed.
The other two options (Itanium and x86) are both unchecked and say no under installed.
I tried checking x86 and clicking OK. I'm then prompted to install print drivers and Browse to where the print drivers are located. I browse to the 3600/enu/drivers/win2k_xp folder and see hpf3600k.inf When I click Open, and select OK, I get a Selected Printer Driver Not Found Error which says The specified location does not contain the driver hp deskjet 3600 series (LIDIL) for the requested processor architecture.
On one of the XP machines, I have installed the printer software and am only able to print if I physically plug the printer into it.
On the other XP machine, I have not installed the printer software but I have download and extracted the drivers. When I click on the Add Printer Wizard and select the printer on the network, it tells me that I am about to connect to a printer on the Windows 7 computer and says that it will automatically install a print driver on my machine. I click Yes to allow it to continue and it tells me that the server for the hp deskjet 3600 printer does not have the correct printer driver installed and that I can click OK to search for the proper driver. I click OK and browse to the folder that I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a Install Driver Error window that says Windows cannot locate a suitable printer driver. Contact your administrator for help locating and installing a suitable driver.
So, it appears to me that the driver that I am downloading from the hp site for Windows XP is not the appropriate driver, am I wrong here?
How can I get this printer to work print on all 3 computers without having to move it from one to the other. The printer has to be physically connected to the Windows 7 machine as the other 2 are in the kids' rooms.
This question was solved.
View Solution.

Try the following: on the XP machine go to the Printers and Faxes folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the shared computer and printer), OK, then click on have disk and point at the directory where you have unzipped the XP driver.
On the XP machine you have already installed the driver do the following: go to the Printer and Faxes directory, right click on the Deskjet 3650, select Properties, Ports, Add port, Local port, New Port, \\Computername\Printername (use the actual share name for the shared computer and printer), OK.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Unable to install Microsoft drivers for keyboard

I purchased a split Microsoft keyboard last night for my Macbook Pro. (Oh how I wish Apple would release an ergonomic keyboard. I love the style of the aluminum keyboard, by my wrists can take it anymore.) I went to Microsoft.com to install the drivers and dowloaded the DMG file, however when I try to install them, I get the following error: "“Microsoft Desktop.mpkg” can’t be opened because it is from an unidentified developer. Your security preferences allow installation of only apps from the Mac App Store and identified developers. Your security preferences allow installation of only apps from the Mac App Store and identified developers." I followed the Apple help instructions to open the file, but it still wouldn't install. Any advice is appreciated. Thanks!
Daniell

Thanks, Sig. That helped. I was able to install the software, but my MBP still isn't recognizing the keyboard or at least naming it as the Microsoft one. Oh, well. Looks like this one is being returned becaue the spacebar is too hard to strike anyway.
Daniell

Z360 - How to install NVIDIA drivers and enable Optimus on Ubuntu 13.04

Hello,
I moved to use Ubuntu on my Z360 laptop. I installed Ubuntu 13.04.
But I have a problem with NVIDIA drivers. I tried to download it from NVIDIA website and install it but it brings a lot of problems.
The resolution of desktop switched to very low and OpenGL cannot start - all dialogs hasn't title panel, desktop without panels.
Please, can somebody explain how can I install NVIDIA drivers and enable Optimus on my Z360?

I am not sure if Nvidia supports 13.04 because it is still in the Beta stage?
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

HT4623 How do I update to IOS 7.0.2 using my computer and Itunes? I have upated to V 11.1. and have my Iphone attached to tower but I am unable to install. "Download and Install" is still grayed out.

How do I update to IOS 7.0.2 using my computer and Itunes? I have upated to V 11.1. and have my Iphone attached to tower but I am unable to install. "Download and Install" is still grayed out.

This is a concern amoung many corporate users. It's going to take somekind of policy change with apple.
Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number

Unable in install all updates and Office pro 2007

I am unable in install all updates and Office pro 2007 (KB2553089,2553090,2584063,2553074,2559530). I am no very techincal but I do know some. I also tried to repair Office and INstall the cd and It would not take it. This all occured about
1 or 2 months ago and i have been living with it but it seems to be causing other problems. My operating sustem is XP. Please Help..

Well, I know this thread is old but since I ran into issues with office 2007 updates recentlly, I thought this is best thread to post to.
Update for Microsoft Office 2007 suites (KB2767849)
Installation date: ‎2/‎20/‎2014 12:05 PM
Installation status: Failed
Error details: Code 80070663
Security Update for Microsoft Office 2007 suites (KB2817641)
Installation date: ‎2/‎20/‎2014 12:00 PM
Installation status: Failed
Error details: Code 80070663
Update type: Important
Security Update for Microsoft Office 2007 suites (KB2817641)
Installation date: ‎2/‎20/‎2014 12:00 PM
Installation status: Failed
Error details: Code 80070663
Update type: Important
Security Update for Microsoft Office 2007 suites (KB2760585)
Installation date: ‎2/‎20/‎2014 12:00 PM
Installation status: Failed
Error details: Code 80070663
Update type: Important
Update for Microsoft Office 2007 suites (KB2767849)
Installation date: ‎2/‎20/‎2014 12:00 PM
Installation status: Failed
Error details: Code 80070663
Update type: Important
Security Update for Microsoft Office 2007 suites (KB2760411)
Installation date: ‎2/‎20/‎2014 12:00 PM
Installation status: Failed
Error details: Code 80070663
Update type: Important
I ignored this for sometime but today I lost my patience and decided to fix this nagging problem. The update prevented me from using the shutdown option as then it would download the updates and then fail over and over again.
None of the steps helped however they set me on a path. I uninstalled all unwanted programs but that was not what fixed the issue. I noticed other than Office 2007 I also had installed Word viewer 2007 , Excel viewer, Powerpoint viewer. I uninstalled these
voila!! Windows update said I don't need these updates on which the install was failing, I checked for updates again and the above updates never appeared in the list of updates found.
I thought I will put this out there just incase someone else runs into similar situation as me. Good Luck.

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT

Just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you Operating System Windows 7 64bit

just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you Operating System Windows 7 64bit

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT201401 i am unable to turn on wifi and bluetooth

I am unable to turn on wifi and bluetooth.

Look here.
http://support.apple.com/kb/TS1559?viewlocale=en_US&locale=en_US

Unable to install new drivers - Satellite 2450 (Win XP home)

After downloading and unzipping I find I am unable to install the new drivers (power saver). the setup halts and shows messages bout being unable to execute the command.

Hi
What exactly Satellite 2450-xxx model do you have?
I asked it because I have found many 2450 models with different power saver versions on the Toshiba driver download section.
Please be sure that you install right version

Can't install wireless drivers on win7 64 bit

I donwgraded my notebook from windows 8.1 to windows 7 64 bit and now I cannot install drivers to use wifi (that, according to hp site should be sp68506 and sp68427). When I opened them to install they close and no installation is performed. I tried to install a lot of other notebook drivers (also broadcom 43142 wireless lan adapter drivers, that should be my network card), but I cannot make wifi work.
My hardware ID displayed for Realtek PCIe FE Family Controller is
PCI\VEN_10EC&DEV_8136&SUBSYS_2337103C&REV_07
I really hope someone can help, because I really don't know what to do.
Thanks in advance to anyone that will answer!
This question was solved.
View Solution.

You're very welcome.
Below are the links to the wireless and bluetooth drivers you need for that wireless card...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_143747_1&swEnvOid=405...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_142906_1&swEnvOid=405...

Unable to Install Wireless Adapter (NIC or a USB) to Pavillion p6340a Win 7 Home Prem

I removed a working TP-Link network card from a Pavillion a1300a XP Home PC to put in my Pavillion p6340a Win 7 (64bit) Home Prem PC.
Downloaded and installed current drivers from TP-Link.
All installed well and the adaptor can be seen in under "Change Adapter Settings" in Network & Sharing Centre and shows as working properly under Device Manager but it is not recognised as a Network within Network & Sharing Centre.
Under "Manage Wireless Networks"" nothing is shown, if I then click Ädd" then Manually Create Network Profile"" I then get a very informative error message ""an unexpected error occurred".
Suspecting a problem with the NIC I deinstalled it and its drivers and tried to install a USB wireless adapter with the exact same outcome and error message. It appears there must be some OS problem or something stopping the wireless network from functioning. Both the NIC and USB adapter work fine when installed on the old Pavillion a1300a XP Home PC. Both NIC and the USB adapter have current Win7 drivers.
Any ideas as it is driving me mad. A simple 5 minute task on any other PC has turned into many.many hours with no solution.
This question was solved.
View Solution.

After many hours uninstalling re installing & trying everything under the sun in many forums, I finally found a solution. Despite trying with firewall disabled at different times the final fix was
uninstall the NIC and USB drivers and devices.
Next uninstall the AntiVirus (in this case AVG Internet Security)
reinstall the NIC and drivers
Reinstall AntiVirus
Tried the USB adapter as well whilst the antivirus was uninstalled and it installed no with problems as well.
All working fine.

Unable to install NVIDIA drivers on Windows 8 (Boot Camp)

I'm running Windows 8 on a secondary partition on my MacBook Pro (17-inch, 2009).
I have, in the past, been able to successfully install Windows 8 on a second partition on this mac and get everything working, including all of my device drivers. I had to erase that partition, though, so I no longer have that installation.
I've installed Windows 8 again, but I'm not able to get my NVIDIA GeForce 9600 GT or 9400M graphics drivers to install!
First of all, I tried installing both 5.0.5033 and 5.1.5621 support software. After a lot of hassle, I got 5.1.5621 to install, but only through the BootCamp\Drivers\Apple\BootCamp.msi file, not through the BootCamp\setup.exe file (the setup.exe tells me that this version of Boot Camp is not intended for this computer model).
When I install the drivers that way, they don't install the NVIDIA drivers.
Next, I've gone directly to the NVIDIA drivers folder inside the support software, and tried to install them from there. i've also downloaded newer versions of the NVIDIA drivers from their website, and with all versions of the NVIDIA drivers, I've had to go through a huge hassle to get them to go to the setup wizard (instead of telling me there's no compatible hardware).
Then, I managed to get them to start installing, but - after Windows has me confirm that I really want to install the driver, despite it's signature - the screen invariably goes black, and my computer shuts down instantly, in what I can only assume is a kernel panic.
This is incredibly frustrating, and I don't know what to do about it. I can't seem to find anyone else with the same problem. Can anyone help me?

According to Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support
MacBook Pro
(17-inch, Mid 2009)
4
4
DVD
DVD
DVD
There is no support for Windows 8 (64-bit) on this machine.
From Boot Camp Support Software 4.0.4033
System Requirements
MacBook (13-inch, Late 2006)
MacBook (13-inch, Mid 2007)
MacBook (13-inch, Late 2007)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
MacBook (13-inch, Early 2009 & Mid 2009)
MacBook (13-inch, Late 2009) *
MacBook (13-inch, Mid 2010) *
MacBook Air (13-inch, Early 2008)
MacBook Air (13-inch, Late 2008 & Mid 2009)
MacBook Air (11-inch & 13-inch, Late 2010) *
MacBook Pro (15-inch & 17-inch, Core 2 Duo)
MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
MacBook Pro (15-inch & 17-inch, Early 2008) *
MacBook Pro (15-inch, Late 2008) *
MacBook Pro (17-inch, Early 2009 & Mid 2009) *
MacBook Pro (15-inch, Early 2009) *
MacBook Pro (13-inch and 15-inch, Mid 2009) *
MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
Mac Pro (Mid 2006)
Mac Pro (Early 2008) *
Mac Pro (Early 2009)
Mac Pro (Early 2007)
Mac Pro (Mid 2010)
Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
Mac mini (Mid 2007)
Mac mini (Early 2009 & Late 2009)
Mac mini (Mid 2010) *
iMac (17-inch, Late 2006)
iMac (20-inch, Late 2006)
iMac (24-inch, Late 2006)
iMac (20-inch & 24-inch, Mid 2007)
iMac (20-inch & 24-inch, Early 2008)
iMac (20-inch, Early 2009 & Mid 2009)
iMac (21.5-inch & 27-inch, Late 2009) *
iMac (27-inch, Late 2009) *
iMac (21.5-inch, Mid 2010) *
iMac (27-inch, Mid 2010)
iMac (21.5-inch, Mid 2011 & Late 2011)
iMac (27-inch, Mid 2011)
all these drivers support Windows 7, 32 bit
* drivers that support Windows 7, 32 and 64 bit
BC 5.x drivers will cause problems. Have you considered using 4.0.4033 version. If your previous W8 installation continued to use BC 4.0.4033 drivers, they would work. Do you have the exact versions of drivers that you had on your previous W8 installation?

Silly issue: Unable to install network drivers for Win2008r2 or Win2012r2

It must be because it's Friday evening and I'm just lucky like that but for some reason I'm not able to install the network drivers for my Windows 2008 R2 or Windows 2012 R2 installs in B200-M3 servers.
I've mounted the Cisco driver ISO (ucs-bxxx-drivers.2.1.3.iso) and in each OS I've gone to Device Manager, then had to View -> Hidden Devices to show the Network Adaptors, then tried to have it install drivers from the ISO but no luck. I did go to the correct subfolder Windows -> Network -> Cisco -> etc. and even tried just having it search the whole CD, searching subfolders. It either says no drivers found, or--for Windows 2012-- it says that Windows has determined that the driver software is up to date.
I've got to be missing something obvious. Any help would be most appreciated!

Hi Benjamin
We have done this many times; which UCS version are you using ?
Check
Interop Matrix http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2-21.pdf
and Installation Guide
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/os-install-guides/windows/b_B-Series_Windows_Install.pdf
Please use
ISO image of UCS-related drivers Release Date 12-DEC-2013
ucs-bxxx-drivers.2.2.1.iso
Normally you are asked during the Windows installation if you would like to install additional drivers; say yes, unmap the install iso, map the above driver iso, install fnic and enic driver; then unmap driver iso, map Windows install iso; do a refresh.
Good luck
Walter.

Pavilion G6-2005ax, unable to install wireless drivers and bluetooth problem.

Similar Messages

Maybe you are looking for