Pavilion G6 Extremely slow following Windows 10 upgrade - no updated drivers available

I installed Windows 10 a couple of days ago on two machines and love it. One machine is fine, no problems at all and everything seems to run smoothly (so far!). However on my HP Pavilion G6 things are not so good. It is EXTREMELY slow - it something opens up at all then it takes several minutes. Edge just hangs and even in Chromes I can't upload files. I have been advised that the drivers may need updating for W10 but there are none showing when I searched the HP website - it only goes to OS8.1 - does anyone know how I can improve things and/or when drivers will be released and finally, how the heck I go about fixing it??? Thanks in advanceT :-D

I had the same problem.
After trying many suggestions on the internet I found one that solved my problem. I took more than a week to solve but now I'm happy.
On my case the problem was the security wifi protocol. I was using AES and changed to TKIP. For me there is no reason to this to work, but solved my problem.
Hope it helps.

Similar Messages

My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
Thanks in adavnce for help.

Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

Does hp-v40,all in one is supported by windows 8? are drivers available?

does hp-v40,all in one is supported by windows 8? are drivers available?

Hi,
Based on the following, no more support from Vista ages that means at least 6 years:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=6063...
With luck, Windows 8 can find a generic, basic driver for your machine to print. Otherwise it's time to buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Wifi extremely slow after Windows 10 Upgrade

After upgrading to Windows 10 my wifi connection is extremely slow. I updated all the Lenovo drivers after the upgrade and it hasn't helped. The listed network driver is 2x2 11b/g/n Wireless LAN M.2 Adapter. I've included screenshot below of a speedtest on the same network between my T440s and my smartphone. The smartphone results are what should be expected on the laptop. T440s Speed Test Samsung S6 Speed Test When observing the task manager there are no other programs utilizing the network.

I had the same problem.
After trying many suggestions on the internet I found one that solved my problem. I took more than a week to solve but now I'm happy.
On my case the problem was the security wifi protocol. I was using AES and changed to TKIP. For me there is no reason to this to work, but solved my problem.
Hope it helps.

Extremly slow Macbook pro. upgrade or change?

Hello,
I am using a macbook pro (late 2011) 2.4 Ghz, 512GB HD, 4 GB Ram with Mavericks.
Lately it is going extremely slow and the software I am using (Finale, Ableton) are running badly and very slow.
I am wondering what is best...to upgrade to 16GB Ram with 512GB SSD? or switching to a newer model?
Also any ideas why it goes extremely slow sudenly? I tried erase and install recently, no change. Speed Disk test gives me 70MB/s Read 70MB/s write.
thanks a lot

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Illustrator 15.0.2 extremely slow on Windows 7 Home Premium 64-bit

Illustrator has been working nicely on my computer up until the 15.0.2 upgrade. Now it chugs along at a snails pace and locks up/hangs frequently when switch between tools or windows.
My system specs are:
Windows 7 Home Premium 64-bit
Intel i7 Q720 processor
6GB RAM
1GB ATI video card
Is anybody else experiencing extremely slow performance with the 15.0.2 upgrade?

I am having a suspisciously similar issue and I would like to elaborate a bit..
I too have this odd issue where Illustrator works ok (though screen redraw lags) but as soon as I go between programs, whether Notepad, Acrobat or similar simple programs - Illustrator freezes for 5-10 seconds. I go back and forth a lot - looking through documents (pdfs etc.) when I draw so the annoyance is simply unbearable.
I have used Illustrator for ages and roughly 6 months ago I bought a new PC to use at home. Its specs are:
OS: Windows 7 Pro 64 bit
PROC: Intel i7 930
RAM: 12 GB OCZ PLATINUM
GFX: ATI RADEON HD 5870
MOBO: P6X58D
These specs thrashes my specs at work by far and yet Illustrator BOTH CS4 and CS5 runs smooth and hazle free at the old worn out computer at work, while being close to useless at home. I have googled my eyes out and found no solution. Tried clearing the prefs, etc. - which made no difference. Disabled Aero and all other gfx consuming stuff - with absolutelu no improvement. I have even tried flagging Illustrator CS5 as Large Adress Aware... didn't help
I can run all other Adobe CS4 and CS5 (master edition) very good!
Can someone help - I am desperat

Flash CS4 extremly slow on Windows 7 64-bit | NOT a Kaspersky issue!

Hello.
My problem is exactly the same, as the one solved in this thread: http://forums.adobe.com/message/2356898#2356898
Flash is just unusable, because of extremely slow performance. Selecting a tool or typing in actionscript takes forever. I've also noticed that sometimes (yes only sometimes), flash.exe takes alot of CPU usage, even when doing simple things like mentioned above.
At the same machine, 2 days ago, before upgrading from Vista Ultimate x64 to Windows 7 Ultimate x64, everything was working perfect.
Please help me as soon as possible. Thanks in advance.
Grzelu.

I got the same problem on W7 (32-bit). I also notice that firefox really slows down on pages with lot of flash. I didn't had that problem when I was using XP.

New MBA extremely slow internet after upgrading to 10.6.7

Hey Folks, I have updating my brand new MBA to 10.6.7 and my internet is now extremely slow through the airpot. All of my other macs are running 10.6.6 and are very fast. Im using a new Airport Extreme base station, does anyone have any idea on how to fix this. LIke I mean its extremely slow online.
Thanks
Jason

Good day,
I'd like to confirm a few things:
What action/activity are you performing in Acrobat when it crashes?
Is the crash consistent at the same point?
You stated in the subject '..after upgrading to 10.6.7'
What OS was on your iMac when you purchased it?
Was this problem occuring when using an earlier verion of 10.6.x?
Have you applied to font update Apple released to address some of the problems they introduced with 10.6.7?
Did you perform a clean install of Acrobat on your iMac after you purchased it or was the application transferred in some way?
I hope we can get this resolved for you!
Regards,
David
Acrobat Community Manager
Adobe Systems

Extremely slow sync after upgrading to iPhone2.0

Even since I upgrade the iPhone to 2.0 firmwire, each sync is extremely slow. It would say "backing up iPhone" for like 15 minutes before real syncing starts.
What did I do wrong that would cause this lengthy backup? How can I avoid that in the future?

I restored my phone over the weekend. The sync returned to normal when I turned the Apps sync off.
I experimented with the phone by turning on a few Apps syncing. When I sync the first time, it went okay. Then without changing any apps, I made a few changes in the address book, sync'ed again, it was getting slower, made a few more changes in the address book, sync'ed again, the sync time kept growing. I didn't time it, but felt like each sync is doubled.
Since the sync now takes hours after a few syncs from a restore, I am quite sure it will reach the 12+ hour sync I experienced before the restore. The sync is taking so long that it is almost impossible to try things out to see a pattern.
But based on someone's observations, the problem is related to Apps Sync.
And it is doubling after each sync. So within days, your iPhone is render inoperable. So my advice is don't touch the Apps Store with a 10 foot pole until Apple gives an answer on what is going on.

ADSL Max, extremely slow following phone fault (0....

Hello fellow BT soldiers,
So, following a phone fault (that was eventually fixed) I've now got an additional fault listed at the "BT Retail Servers" (according to the online BT fault tracker).
For about a week we've had extremely slow download speeds, nothing much more than 0.1Mb/s - we only ever manage 1.5 - 2.5Mb speeds, which is just about workable, however being reduced to 0.1 is like returning to the days of 56k dial-up.
I ran the BT Wholesale "Broadband availability checker" which returns the below results -
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
ADSL Max
Up to 1.5
1 to 2.5
Available
Fixed Rate
2
Available
I'll be at home from 7pm onwards, so can post additional information if needed this evening (unless I can perform remote checks somehow?).
As per tradition, i've spoken to various people at BT, who have all promised resolution; no progress to date.
Help please!
Blatcho
Solved!
Go to Solution.

Hi imjolly, all,
Back online -
Dialled the 17070 number, option 2, no noise on line.
BT Diagnostic Test (this took ages to upload!!)
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
0 day, 00:09:45
Downstream:
3,680 Kbps
Upstream:
448 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
10.3 dB / 20.0 dB
Line attenuation (Down/Up):
52.0 dB / 31.5 dB
Output power (Down/Up):
19.0 dBm / 11.9 dBm
FEC Events (Down/Up):
1 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
0 / 0
Error Seconds (Local/Remote):
0 / 0

My Mac is incredibly slow following an upgrade to my Mac 2009 to Mountain lion. What do I need to do to improve it?

Please Help!!
My computer has died following the upgrade. I have installed additional memory to 3GB, but no joy.
Please confirm what can be done to improve?
Thanks

Information.
Startup Issues - Resolve
Startup Issues - Resolve (2)

Extremely slow variable window output

Hello,
exporting data from the array view in CVI2013 may be extremely slow. For example, having data as illustrated below (an array of 6016 elements) I used the menu command Output / ASCII to save the array to a file on the local harddisk. It took more than five minutes...
Solved!
Go to Solution.

Hi and thanks for confirmation.
'Known issue' means 'known to NI', so let me suggest to update the list of known issues, the last two months have seen quite a few new CARs

Database is extremely slow and alert_log is not updateing

Please HELP!!!
Our database is experience a big performance issue. It extremely slow.
At the same time our alert_log is not updating. Last entry was made on 11/15/05.
Can this be related? The alert_log size is 10.6MB. Is there a limit to size of alert_log?
What are the appropriate steps for renaming alert_log?
Does anyone experiences the same issues before?
Thank you in advance,
Sonya

on Windows
Select the alert log and press right mouse buttong, select rename and change the name.
From dos prompt, go the directory/location where alert log exists, use the following command:
ren alert_ORCL.log alert_ORCL..log.old
on UNIX
go the location of alert log, use the following command.
mv alert_ORCL.log alert_ORCL.log.old
(give alert file name as exists at your place)
Important: No need to shutdown the database. Once you rename the file, connect as sysdba and switch the logfile and see whether oracle has create the new alert log or not.
alter system switch log file;
Jaffar

Disk access extremely slow after 10.5.2 Update

I did the update to 10.5.2 today.
1. I tried to update via Software Update. The update started but then stopped with an Error message (Contact Support) and the system freezed. There was just the spinning wheel on blue background for more than one hour. No more harddisk activity. I finally rebooted (hard way). After a reboot I had a somehow upgraded system. But many things did not work anymore (most applications crashed, mail could not access keychain items anymore, etcpp)
2. Then I downloaded the complete Update package to do a manual update (happily firefox still worked). After a manual install it worked. It installed fine and rebooted. Now everything works as it should with the only problem that everything is extremly slow. Starting an application lasts about double the time as normal, loading files takes 3 to 4 times more time than with 10.5.1
To fix these issues I tried several things:
- Fixed permissions
- Cleared all cache files and forced system to rebuild them
- Severall reboots
- Waited until backup completed and Spotlight index was rebuilt
Bootup time is now fine (more or less). Just a little slower than 10.5.1. Application start is still slow but better. But the file access is still extremly slow. This can be observed very well in Parallels which still works fine, but needs 3 to 4 times longer to start (so do all applications within parallels). I checked CPU (Activity Monitor) but could not see anything special.
Any ideas what could be the reason for this behaviour and (more important) how to possibly fix this? I'm thinking about going back to 10.5.1 with time-machine and then try it again with the package install.
Any help/ideas would be appreciated.

Is it slow wireless LAN behavior affecting Time Machine? Check out the third page of this thread, specificallly the post by John Albergo about "delay_ack."
http://discussions.apple.com/thread.jspa?threadID=1394485&start=30&tstart=0
It helped me a lot.

Slow after windows 8.1 update

I have recently done the windows 8.1 update on my laptop and now for some reason when ever i boot the laptop up it takes forever to load. before the update the laptop booted in about 17s but after it takes more like 30s. i tried solving this problem myself but haven’t had much luck. what i have found that if i uninstall or disable my Intel HD graphics 4000 card it seems to solve the problem but i need my graphics card on the play some games etc. so my thought is it must be a hardware problem or a driver problem.
Can anyone help??

Hello MooreMoose, welcome to the HP forums.
It appears that your notebook is slow too start up after an update. I will try to help you with this.
Start by doing a clean boot. This will have you disable start-up items and services that aren't essential to have running when the computer first starts.
This could also help in determining if an application is behind the slowness. If the behavior continues, then it would be something updated or the OS. If this is the case, please start by doing a system restore. I recommend doing a restore from safe mode, to ensure it goes through correctly.
I will leave you to start with this, please let me know how everything goes.
Thank you for posting on the HP forums.
I worked on behalf of HP.

Pavilion G6 Extremely slow following Windows 10 upgrade - no updated drivers available

Similar Messages

Maybe you are looking for