Pavilion g6 laptop with start-up and memory module issue + beeping

My laptop is a g6-1c58dx. I was(?) having problems with my cooling fan, so I went about disassembling it to get into the fan to clean the fan out. So far, so good. I think I'm having some kind of problem putting the memory module back in now though. I'm not positive which side of the memory module was facing up when I took it out and I forgot which of the two slots it was in. However, I've tried with both sides in both slots and still no dice. Every time I hit the power button, the capslock button blinks, the screen doesn't turn on and I get three long beeps followed by two short beeps. I've been trying to find a good picture of the memory module in the laptop some place online to see if I'm doing something wrong, but I haven't been able to find a good enough one. I went digging into part of the support rescources here that mentioned having some video and such which might be related to my problem, but I couldn't find g6, only g1, g2, and g3. So, it's very late here. I've been working on this all night. Could anybody tell me what I need to do to end the maddness?
This question was solved.
View Solution.

Here it is:
https://www.youtube.com/watch?v=_1I0kahnC4I
and
https://www.youtube.com/watch?v=VLXe2LJXpBs
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    Hello Don,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described.  The following article has steps to do this(it is important to remove all components in the order listed):
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    I recommend continuing with these articles if you continue to experience issues with iTunes:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

    I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • I have just bought a new laptop with windows 8 and when trying to load itunes was told it was incompatible. Can anyone tell me what I can do to put itunes on my computer? thank you

    I have just bought a new laptop with Windows 8 and cannot load itunes from the existing disc or online as it is incompatible.Can anyone tell me what I can do now to get itunes on to my computer? Thank you

    See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
    tt2

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • My iPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recogniandze it and will sync but after the syncing process ends the charging stops. Any suggestions?

    MyiPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recognize it and sync, but will only charge during the syncing process. Any suggestions?

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer.  I can connect the laptops to the printer.  Any advise?

    I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer.  I am not able to connect the laptops to the printer.  Any advise?

    The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
    Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
    Read up the issue.
    http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
    Cisco vpn client..
    https://supportforums.cisco.com/thread/239113
    I did not search much.. just grabbed the first article I could find that explains the issue.
    The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
    It is also a security risk using split tunnelling so often it will not be allowed.
    Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

  • I have upgraded my laptop with Adobe X1 and now all PDF's will only open as en ecyrpted word doc, pl

    I have upgraded my laptop with Adobe X1 and now all my existing savedPDF documents will only open as an encryted word document, HELP! Please!

    Hi Juliea,
    I think the file association for PDF is not correct. Instead of double clicking the file to open, Please try below mentioned
    right click on the file and select open with..
    Select Choose Default Program
    Select Adobe Reader from the list(If it is not in the list then navigate C:\Program Files (x86)\Adobe\Reader 10.0\Reader and select AcroRd32.exe)
    Remember to select the check box"Always use the selected program to open this kind of file"
    Click ok
    ~Pranav

  • Is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

    is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

    Well it depends on the age.     http://www.everymac.com/ should help you identify the age of the two models.
    Apple may use two processors called i5, but newer models have different optimizations than older models.
    The processor is usually not the main affect on speed.  RAM helps, but barely unless everything is on an SSD already.   Hard drive speed is usually the limiting factor of speed on computers.   eSATA hard drives with higher RPM can often yield the fastest results because notebook hard drives tend to be slower that are not SSD, but for those you need either Express/34 or Thunderbolt based adapters.

  • Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands

    Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands - as I have multiple numbers for people (ie: iPhone, Work, Home), is it the BlueAnt that is having the issues or the iPhone? Tried to eliminate info on my partner's contact in with only 2 contact numbers (iPhone, Home) and one or the other is totally screwing up. Seems, from BlueAnt website, that it would be the iPhone contacts...and the guessing begins?!! Anyone else have similar issues when BlueAnt S4 was paired and giving 'Phone Commands'?? Any suggestions would be beneficial as I've spent way too much time on the web looking for a good fix/answer. Thanks.

    On your new phone: Settings>General>Reset>Erase All Content & Settings. Start over, this time using your new ID.

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • Can I upgrade my laptop with additional RAM and a SSD Drive.

    Hello, Well I am on the following system :-  HP Pavilion 14-v015tu Notebook PCModel #: J3Z65PA It has a 4GB RAM and I want to upgarde it with additional 4GB of memory putting it to 8GB of RAM. Also I am on Windows 10 currently the OS is quite slow on my HDD and I have been thinking to switch to SSD.I need help that can i upgrade my laptop with a 512GB SSD and if yes what size and stuff as I cant find information about the form factor,inches,size,etc of my current HDD.Also will it fit properly and stuff? Also my main concern is warranty.Does my warranty gets void if I upgrade ? Thanks 

    The backup is an issue, but you can always mail your work to your self… but the mail server has to be configured the way that mails are not deleted.
    The more elegant way is "MobileMe", you can use it as a storage and save your work there.
    Keep in mind, the iPad is limited to what you can do with the Apps, so check first if there are some Apps for the work you need to do…
    enjoy your magic machine

  • OS deployment to laptops with lids closed and battery power?

    I'm trying to deploy Windows 7 to laptops with the lids closed.  I send wake on lan to start the deployment and it works on some of the laptops (they are all identical) and the rest run part way and never complete until I walk to the laptop and open
    the lid (then the deployment resumes).
    I am assuming the reason some complete and some do not is because the smart device that charges these laptops charges the laptops in banks to avoid overloading the power source and maybe the laptops do not want to continue after a reboot if they are not
    actively charging at that moment and the lid is closed.
    Are there any special settings (power plan settings or BIOS settings) we should configure to ensure that deployment continues unattended whether the lid is open or closed and whether the laptop is charging or not?

    I am assuming the reason some complete and some do not is because the smart device that charges these laptops charges the laptops in banks to avoid overloading the power source and maybe the laptops do not want to continue after a reboot if they are not
    actively charging at that moment and the lid is closed.
    Are there any special settings (power plan settings or BIOS settings) we should configure to ensure that deployment continues unattended whether the lid is open or closed and whether the laptop is charging or not?
    Connect an external monitor up to one of the laptops in question to see what is really going on. Specifically what is blocking things here? Are the machines actually booted into WinPE or the full OS, or are they blocked at BIOS.
    Everything else at this point is speculation. There is nothing built into MDT Litetouch that would prevent it from continuing due to the state of the Laptop LID
    Keith Garner - Principal Consultant (owner) at <a href="http://DeploymentLive.com/">http://DeploymentLive.com</a>

  • Slow slow slow...even with low CPU and memory usage.

    Sometimes my Mac gets really slow, especially with applications, and even more especially when opening applications. What I don't understand is that when I check Activity Monitor during slow times, it shows plenty of CPU and memory still free, far from being maxed out. I try to keep a good chunk of my hard drive available for virtual memory too, so I'm unsure where its getting bogged down.
    Any ideas?

    You may just need a little maintenance:
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
    OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard or Snow Leopard Cache Cleaner, CockTail, and Xupport, for example.
    For emergency repairs install the freeware utility Applejack (not compatible with Snow Leopard.) If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack is not compatible with Snow Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. Carbon Copy Cloner (Donationware)
    6. SuperDuper! (Commercial)
    7. Intego Personal Backup (Commercial)
    8. Data Backup (Commercial)
    9. SilverKeeper 2.0 (Freeware)
    10. MimMac (Commercial)
    11. Tri-Backup (Commercial)
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at www.versiontracker.com and www.macupdate.com.

Maybe you are looking for

  • Group by order by in same query

    Hi, I am wondering whether it is possible to use group by and order by in same query For example if i have a table like the one below Col1 Col2 col3 C 36 2 A 25 5 B 12 8 A 25 6 B 12 9 C 36 1 A 25 7 I need a result like below A 25 5 A 25 6 A 25 7 B 12

  • Need To Turn Off Auto-Renewal

    Hello, I have just boguht a subscription to Unlimited US & Canada for 1 month [$2.99] Without knowing it would be auto renewing. My family is very poor at this time, and I would really like to shut off the auto renew, as Im not going to be able to af

  • Sprint Iphone 5 no 4g/LTE

    My sprint phone is not picking up LTE! Before i got this phone, even at home i would get 4G but nothing is picking up on my iphone! it's really starting to bother me. Anywhere i go im stuck with 3G in the status bar! How stone age is that?! I've done

  • Send Fax without Esker or other third party software

    I wanted to know if there is a way I can send PDF file faxes from SAP to physical fax machines without using third party softwares like Esker. If so can someone provide me as much details as possible

  • Code written for LabView 6 cannot find SubVIs when run in LabView 2013

    I am reworking some code that was originally written for LabView 6.1 There are quite a few SubVIs that the program was not able to locate when I launched the main VI: AI Config AI Start AI Clear DIO Clear Continuous Pulse Counter Start Counter Stop q