Pavilion g6 motherboard replace
i am having hp pavilion g6-1035TX laptop , i am having problem in motherboard so i wanna buy a new mother board please suggest me motherboards for hard core gaming ,which mah lapi supports
BIBHUpro wrote:
i am having hp pavilion g6-1035TX laptop , i am having problem in motherboard so i wanna buy a new mother board please suggest me motherboards for hard core gaming ,which mah lapi supports
Hi,
HP G6 series laptops are budget laptops. There are only couple of boards compatible with the chassis and those do not have very poweful graphics chips for gaming. I suggest to buy a better laptop.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*
Similar Messages
-
Where can I get a motherboard replacement for a Pavilion dv6-3020us laptop?
Where can I get a motherboard replacement for a Pavilion dv6-3020us laptop?
Have you tried to clean vents with compressed air.
Some other propositions below:
Check the link below:
How to prevent and deal with overheating.
Try to solve problem with audio by using intrcutions form the link below:
Use Hard Reset to Resolve Hardware and Software Issues
Note:
Do this for 1 minute instead 15 seconds.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
Will a hp pavilion 8670c motherboard be compatable with a DV2000 notebook
Wanted to know if my hp dv 2000-329wm notebooks motherboard can be replaced with a Hp pavilion 8670c motherboard , the 2000 has a AMD processor and the Pavilion has a Intel pent 3
Hi @49erLance ,
Welcome to the HP Forums!
It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand you are looking to replace the motherboard on your dv 2000-329wm.
Here is a link to the HP 2000 Notebook PC - Maintenance and Service Guide. Please note chapter 4,page 69 for the recommended replacement system boards
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
My '08 17" macbook pro motherboard replacement has issues
my mac had its motherboard replaced by the recall a couple years back and since i got it back it has been restarting on it's own, if have too much pressure on the keyboard or if the surface under (table) isn't perfectly level.
ONce it restarts - it won't stop until it's level and been powered off and on several times.
I had been living with this problem for the past 2 years as of this february (I believe) until it stopped for 24hrs 3 weeks ago and I was forced to buy again.
My buddy told me it could be because apple hired a 3rd party company to handle the replacements of the recalled motherboards and they neglected to tape a cable that causes the power surge to restart my mac or that they didn't solder the connection.
How can i fix this issue?Sorry, let me clarify.
Yes, it was the Nvidia GeForce 8600M GT recall
It works, but suffers from restarts when moved from one location to another and must be restarted over and over until the power from the surge stops.
I want to figure out how to fix myself (I do alot of iphone repairs and can handle small fixes) or if needed through apple or a 3rd party.
I need it fixed completely, because I'm sending this to my computer illiterate mother. -
Lenovo B560 motherboard replacement
Hi,
My dear laptop died on me about a month ago. It wouldn't do anything when pressing the power button and the power led would not light when connected to power. Tried with or without the battery, no led, no power. I checked with another cable and I checked my cable on another laptop and it worked so the issue has nothing to do with the power cable.
I took the laptop to my universities repair shop for a diagnosis and they said the Motherboard is dead.
Any suggestion where I could find a brand new motherboard replacement in the UK?
Thanks,
sorband
Solved!
Go to Solution.Hi Sorband,
unfortunately nothing found in UK, but please have a look at this eBay sales...
http://www.ebay.co.uk/sch/i.html?_trksid=p2050601.m570.l1313.TR0.TRC0&_nkw=Lenovo+B560+motherboard&_...
may use Google search...
https://www.google.com/#newwindow=1&q=buy+Lenovo+B560+motherboard
Good Luck... Zehn -
Qosmio F10 won't recover after motherboard replacement
Hi,
I'm having a problem with recovery on my Qosmio F10. It won't boot from the CD, I get a message 'media test failure check cable'.
I tried everything I could find here about this problem with no result. Then I read somewhere on this forum that recovery cd wouldn't work if the laptop has been serviced and has a new motherboard. This is excatly the case.
I had a new motherboard and CD/DVD drive put some time ago.
How do I make it work again?
A.> Then I read somewhere on this forum that recovery cd wouldn't work if the laptop has been serviced and has a new motherboard. This is exactly the case.
Who has replaced the motherboard? The ASP?
Well, usually the Recovery CD should works after the motherboard replacement.
I presume the parts were replaced with exactly the same parts and therefore there shouldnt be a conflict between the Recovery CD and the new motherboard.
Did you try to boot from another bootable CDs like Win XP or Linux? Check this! -
1st Generation 2 Gbyte Motherboard Replacement for Model No.A1137 needed, please...
Quote from: vernonion on 27-August-08, 09:51:53
Everything is not working fine, and a pop with sparks is not a normal result from turning on a power supply. If you got it from Tiger send it back and get this one.
I talked to the rep earlier, but I had to go to a meeting. When I called him back he said he was on the phone with Intel to make sure my CPU would work with that board. I know it will work so I have no clue why he called them. He didn't seem to concerned about the PSU though. I told him that the PSU popped and made sparks and it didn't phase him at all. I already told him I wanted to exchange the RAM with different kind and I wanted a new PSU. When I give him the new RAM and the PSU I want I will give this one a try.
Thank you for your help. -
Afte rmany years my R61I 8918CTO 08/03 has given up the ghost due to the infamous
Nvidia Quadro NVS 140M.. GARBLED DISPLAY PROBLEM that Lenovo and Nvidia know about and of course refuses to fix now.
I have the 15.4" wide screen with 1900 max resolution, 1394 firewire, bluray writer and T9300 chip so it was a very expensive nice laptop that still does everything I want. I have taken very good care of it over the years and it is in excellent condition. Right now it is brick due to the GPU chip. Now my question is what is the Motherboard number without me taking it apart to get it before I have a replacement board and what motherboards replace it? AFter research I see if I can get the same motherboard after 08/08 it should be good. Or is there another motherboard with a better GPU chip I can use? I know this is an old laptop but it will cost over $1000 to get the same thing now just slightly faster with more memory I do not need so I would like to fix this one.
I have found what I believe is in the laptop either 42W7791 or 42W7882 both with the Nvidia chip. I cannot find a replacement with the Intel chip.
Thanks!Welcome to the forum!
thermostat wrote:
After research I see if I can get the same motherboard after 08/08 it should be good.
Post 08/08 boards are rare. You can contact forum member TuuS, he may be of help finding you a proper board.
thermostat wrote:
Or is there another motherboard with a better GPU chip I can use?
There's the possibility of fitting a T61p planar (Nvidia Quadro FX570M) in your R61i case, but the frame needs modifications and there are other disadvantages. Source (german only): http://thinkwiki.de/R61i#T61-Board_im_R61-Geh.C3.A4use
Regarding the Intel boards, you can try to get one of the following FRU numbers listed below, there might be more, I got those from the hardware maintenance manual (you can download it from here: click me!)
42W7825
42W7883
42W7826
42W7884
42W7827
42W7885
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество -
HP G5056EA motherboard replacement
Hi Guys,
I'm replacing my motherboard as its dead, no sign of life when power cable is plugged in, it shows that charger is plugged in by illuminating power sign on the led screen where hdd light, power on lights are.
so assuming need a new motherboard. I've bought new one now struggling to open the laptop to get it out. I have removed
every possible visible screws from the back but it seems like one or two screws are holding it up from the middle of the laptop which It seems like they're screwed from below the keyboard.
I would apprecaite if someone can show me how to get this motherboard out, I'd really appreciate it.
Thanks in advance.I don't think I will ever receive reply from HP tech support as I have rang them and they were unable to help me.
So far I have bought 18 laptops for my business and guess what all of them had one or the other issue. 2 of them needed motherboard replacing within 2 months,
Based on my experience with HP products and especially HP tech Support, I would never recommend anyone to buy any HP product from now on.
WORST CUSTOMER SERVICE EXPERIENCE with HP. -
Hi i bought a Macbook Pro 8 & a half mounths ago.Today i had the hard drive replaced as it was faulty and on Monday i have to take it back to the Apple shop to have the Motherboard replaced. I feel that i should be asking for a new macbook, where do i stand.
Yes thats what i thought but i only have 77 days left on my garentee so its a worry, and have to drive 1 hour to get to closest Apple shop, spent the whole day there today when i should have been at work and have to make the drive again on Monday Then back again next Friday to pick it up. I paid over £1000 ponds for this computer so wouldnt expect it to have its insides replaced befor a year. Feel very let down, and no longer love my macbook pro.
-
Thinkpad T400 Motherboard Replacement Advice
I accidentally dropped my T400 into water(Fell from a table into a water container). The service technician who checked it told me that motherboard's not working and has to be replaced. Now I am not sure whether to invest in the motherboard or buy a new one(I had a core 2 duo P8700 which is a decent processor and these days you get and i3's and i5's from $600).
Couple of things here is
1) T series right now would be outside my budget range.(student)
2) I am not sure if I would be happy with the lower end thinkpads/Dells/HP.
So any suggestion at thi\s point?
Would replacing a motherboard be worthwhile(The technician told me it would be around 300- 350 range.
Should I go with a new one or should I get the motherboard replaced?Ouch...
What else is broken on it? Did any other parts survive the dunking- the screen, hard drive, RAM, battery, keyboard/UltraNav, fingerprint reader, speakers, or other motherboard modules such as WiFi and Bluetooth?
It might be a good idea to try to score a used one through the usual channels- they're around that costly (less than $450 anyways)- and just write off the other one, depending on how many other parts still work.
How much water did it fall into, anyways? Was it a full 5-gallon jug, or was it just an inch or two of water that killed it? -
Blue & White motherboard replacement
Hi,
I own a Blue & White G3 350 with an original motherboard (not the Rev2). I'd like to buy a Rev2 motherboard and do a swap. The Rev2 motherboard that I am looking to buy has a G3 450 processor on it. One look at my list of Macs at the bottom of this post (I still own them all) will tell you that I'm no stranger to the Mac platform. I have upgraded hard drives/optical drives, RAM, video and audio cards, but have never attempted anything like a complete motherboard replacement. How easy is it and is there anything special I need to do? Also, would there be any compatibility issues regarding the systems from one revision to the next?
Thanks in advance...
Mac +, Mac SE30, Mac II, Powerbook 140, Performa 6400/180, G3 233MT, G3 350 B&W, Mac OS X (10.4.5) G4 500 DP, G5 2.0 DP.You will need a grounding wrist strap and a #2 Phillips screwdriver. When you get all the screws out, the board slides about 1/4 inch away from the backpanel and then you lift it gentely up and out.
When you are done, you may need to do a firmware update, which requires some version of Mac OS 9 on a Hard drive (not just a CD).
A PRAM backup battery anywhere near 3.2 Volts in your hand will be dead soon.
Superstition says that if it will not start after the swap, even with a good battery and a CUDA Reset, holding down command Option P R while you press the start button on the keyboard may give better results. -
Yoga 2 Pro motherboard replacement -- are different configs interchangeable?
I bought a Yoga 2 Pro laptop in February 2014 (so it's out of warranty) -- Core i5 with 8GB of RAM. Unfortunately, 2 days ago it randomly turned off (with the keyboard backlight and power button LED flashing about every 3 seconds). I've been able to turn it back on twice, but the problem still persists. From looking around this forum, the problem is likely faulty RAM, which means a motherboard replacement is in order.I am unable to find the exact same motherboard for sale online, but I found the Core i7 with 8GB RAM version. Are the two motherboards interchangeable? Has anyone successfully done this? Thanks in advance!
Despite lack of an answer, I went ahead and bought the i7 version. I can confirm the two are indeed interchangeable.So, if you're looking to upgrade your existing Yoga 2 pro, it can be done via a motherboard replacement (though not exactly cheaply). My laptop now works again (knock on wood that it won't start acting up again). However I can't say that I've been impressed with its quality so far Forgot to mention: taking my laptop apart and putting it back together again fixed a minor screen alignment issue (screen was not 100% aligned with base when closed). It always bugged me (though not enough to RMA), and I'm not sure why it shipped out new from the factory like that but I'm glad I was able to fix this as well.
-
K330 Motherboard replaced but need help.
I got the motherboard replaced from the recall. But the problem is the tech did not put in the Model # and serial on the motherboard. Is there any motherboard manuals that might tell me if the specs have been upgraded etc??
From CPU-Z:
DMI BIOS
vendor LENOVO
version DKKT20AUS
date 03/16/2011
DMI System Information
manufacturer LENOVO
product INVALID
version Lenovo Product
serial INVALID
UUID {FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF}
DMI Baseboard
vendor LENOVO
model To be filled by O.E.M.
revision To be filled by O.E.M.
serial INVALID
DMI System Enclosure
manufacturer To Be Filled By O.E.M.
chassis type Desktop
chassis serial INVALID
DMI Processor
manufacturer Intel
model Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
clock speed 3400.0 MHz
FSB speed 100.0 MHz
multiplier 34.0x
DMI Port Connector
designation J1A1 (internal)
designation PS2Mouse (external)
port type Mouse Port
connector PS/2
DMI Port Connector
designation J1A1 (internal)
designation Keyboard (external)
port type Keyboard Port
connector PS/2
DMI Port Connector
designation J2A1 (internal)
designation TV Out (external)
connector Mini Centronics Type-14
DMI Port Connector
designation J2A2A (internal)
designation COM A (external)
port type Serial Port 16550A
connector DB-9 male
DMI Port Connector
designation J2A2B (internal)
designation Video (external)
port type Video Port
connector DB-15 female
DMI Port Connector
designation J3A1 (internal)
designation USB1 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J3A1 (internal)
designation USB2 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J3A1 (internal)
designation USB3 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J9A1 - TPM HDR (internal)
DMI Port Connector
designation J9C1 - PCIE DOCKING CONN (internal)
DMI Port Connector
designation J2B3 - CPU FAN (internal)
DMI Port Connector
designation J6C2 - EXT HDMI (internal)
DMI Port Connector
designation J3C1 - GMCH FAN (internal)
DMI Port Connector
designation J1D1 - ITP (internal)
DMI Port Connector
designation J9E2 - MDC INTPSR (internal)
DMI Port Connector
designation J9E4 - MDC INTPSR (internal)
DMI Port Connector
designation J9E3 - LPC HOT DOCKING (internal)
DMI Port Connector
designation J9E1 - SCAN MATRIX (internal)
DMI Port Connector
designation J9G1 - LPC SIDE BAND (internal)
DMI Port Connector
designation J8F1 - UNIFIED (internal)
DMI Port Connector
designation J6F1 - LVDS (internal)
DMI Port Connector
designation J2F1 - LAI FAN (internal)
DMI Port Connector
designation J2G1 - GFX VID (internal)
DMI Port Connector
designation J1G6 - AC JACK (internal)
DMI Extension Slot
designation J6B2
type A5
populated yes
DMI Extension Slot
designation J6B1
type A5
populated no
DMI Extension Slot
designation J6D1
type A5
populated no
DMI Extension Slot
designation J7B1
type A5
populated no
DMI Extension Slot
designation J8B4
type A5
populated no
DMI OEM Strings
string[0] DK20A
DMI Physical Memory Array
location Motherboard
usage System Memory
correction None
max capacity 32768 MBytes
max# of devices 4
DMI Memory Device
designation A1_DIMM0
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MBytes
DMI Memory Device
designation A1_DIMM1
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MBytes
DMI Memory Device
designation A1_DIMM2
format DIMM
type unknown
total width 64 bits
data width 64 bits
DMI Memory Device
designation A1_DIMM3
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MByteshey skimore,
i would suggest to cross reference with your current setup with this >>
http://www.lenovo.com/psref/pdf/icbook.pdf
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Missing PCI serial port driver on elitebook 2560p after faulty motherboard replacement
Hi,
I have the following issue, after a faulty motherboard replacement on my elitebook 2560p with Win XP, I find a question mark in the device manager list reporting that a PCI serial port driver is missing.
Browsing device properties I can read:
PCI serial port - PCI bus 0, device 22, function 3
and
PCI\VEN_8086&DEV_1C3D&SUBSYS_162B103C&REV_04\3&B1BFB68&0&B3
I've already tried locating driver without success in SP38312, SP45131, SP53918, unzipping the files and trying to locate manually the driver inside the folders with the windows driver update function.
can you help locating the correct driver?
thanks a lot in advance
This question was solved.
View Solution.Hi:
Try this one:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Paul
Maybe you are looking for
-
Ship to party address in sales order header
Hi We changed the ship to party address at the header level and new address number got generated and updated the table VBPA. We need to revert the address so that the original address number of the ship to party should be updated in the table VBPA. E
-
Display settings on DVD player
I'm authoring a DVD for a live show. The disk has 30 or so tracks with 30 menus. ie. track one finishes and jumps to menu two untill operator presses enter etc etc.. He needs to be able to see what menu is loaded on the dvd player display. Can anyon
-
Material Master load in SAP BW
Hello, I need to load fron SAP ECC Article Characteristics Color and Size. I have created Generic and variant articles by color and size and I want to load in Bi the relation between variant article-size-color. Is there any table in ECC to create a c
-
Palm TX keeps entering a reseting phase when I try to sync it. Help!!!
Ok so when I try to sync my Palm TX I press the sync button and the screen turns black then enters a constant reset loop. I have done a hard reset then tried syncing it again, same problem. I also tried locating the backup folder everyone speaks ab
-
Oracle 10g and internet connection
I recently installed a program which uses and installed the Oracle 10g database, but cannot run the database while I have an internet connection. If I disable my internet, I can run Oracle and my program. If I am connected to the internet and run the