Pavilion IPS LED Backlit Monitor 27xi not working

Despite following instruction to letter, monitor refuses to work constantly showing No Signal!!!, have tried all the different cables supplied, but still nothing.
Getting ready to return product received less than 2 hours ago!!
Your assistance would be appreciated.
This question was solved.
View Solution.

What's the source?
*** Say 'Thanks' with Kudos ***

Similar Messages

HP Pavilion 23fi IPS LED Backlit Monitor

Hi there. I would like to ask, can my HP Pavilion 23fi IPS LED Backlit Monitor support stereoscopic 3D to play games?
This question was solved.
View Solution.

Hi,
Based on the followinf specs, No:
http://www8.hp.com/au/en/products/monitors/product-detail.html?oid=5350537#!tab=specs
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp pavilion 27xi ips led backlit monitor

have windows 8.1, nividia GTX 660 GRAPHICS CARD, and all of a sudden I started getting a every 3-4 second flicker on the screen. Anyone else have this issue? And able to fix it? I have updated and checked all drivers, even did a system restore to an earlier date when there was no flicker, but no luck on fixing the issue.

Here is the "Display Quality Issues" section for the monitor. There is a section on screen flickering. Read it to see if it helps.
Please click "KUDOS star" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HP Pavilion 23xi 23-inch Diagonal IPS LED Backlit Monitor

I use my monitor when im capturing game footage for a youtube channel. However evertime i try to capture olde games the message 'input signal out of range' pops up. i dont understand! the game looks fine on the screen but that message is in the way! is there anyway to turn it off?

Hi dracucard,
I have researched your error and usually the cause is a higher screen resolution then what the monitor is capable of or corrupt graphic drivers. I would suggest reinstall or updating your graphic drivers. Are you using an HP PC? If so, what is your product number? What program are you using to capture the video.
Find your product number on a desktop:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07555
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Pavalion 27xi IPS led backlit Monitor

my monitor has a black edge 3/8 of a inch on the sides and top, tech says that's the way it is suppose to be. I can't believe they would build a monitor and leave a edge like that. I have windows 8.1 I have tried it with DVI-HDMI-VGA all work the same. build date sept.2013
I just need to know if People with the same monitor has the black edge same as mine.
Thanks
I have tried the HP recomends didn't work . my Video card is geforce gt 630 2mbs

Hi johncrosno,
You are correct, you should have a full display. Have you upgraded to Win 8.1?
Explain upgrade path. There are many variables involved. Graphics drivers have caused issues.
Best guess is incorrect Nvidia drivers or setttings in Nvidia Control Panel.
Here is a link to current Nvidia drivers for Win 8.1 64 bit drivers for a 630 card.
Using this link, Select "start search", then select "Geforce R331 Game Ready Driver" - WHQL 11-19-2013.
Jaco
Errare humanum est.

HP E271i LED backlit monitor backlight not on // IS NOW FLICKERNIG

Hi!
I have a HP E27i monitor. Received it yesterday and it was working fine, but as I came to turn it on today the backlight doesn't seem to turn on. Under a bright light there is a very dim image of my desktop and I have tried connecting the monitor to another computer - same result.
All the best
Tanel

It has just been sitting there, powered on for a while. As I moved the mouse the picture got slightly brighter and is flickering. This is a new development.

Touch screen display for HP Pavillion IPS LED Backlit Monitor

Does it exist?

Hi,
No. There are meny around including from HP:
http://www.hp.com/sbso/solutions/pc_expertise/biz-monitor/touchscreen.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Dual Montior setup for x2401 LED Backlit Monitor

I just purchased two x2401 LED Backlit monitors. They are connected via Lenovo dual display adapter to my Dell OptePlex 3020. Both montiors are recognized as Display 1. I have gone to the control panel and attempted to set-up one monitor as the main monitor and the other as an extention. That didn't work. Right now the samethings is on both montiors. Sort of defeats the purpose of two monitors.
Anyone know how to have the monitors recognized as different?
Thanks.

Hi Georgia-Dee,
Welcome to the HP Forums!
I have read your post on attempting to connect your two x2401 LED backlit monitors to your computer, and I would be happy to assist you!
To begin, I recommend following this document on Using Two or More Monitors with One Computer (Windows 8). This should help with setting up dual monitors correctly.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

UCCX: Silent monitoring is not working and recorded file is also not playing

Hi,
Running UCM 8.5 cluster with UCCX 8.5.
In CSD, silent monitoring is not working.
Windows XP OS is running on supervisor desktop. when i select the agent
then the silent monitoring icon will highlighted once i click on the icon,
after 5-7 seconds i am getting an error "Silent monitoring session has
failed".
Not able to playback the recorded files:
I can able to record and the file size is 2.6mb for approximate 3min
recording.When i tried to play from supervisor record viewer it is playing
but no voice is coming. And i downloaded using play & save option and
tried to play the .wav file but i can't hear any voice.
Problem is while playing back the recorded file. I can able to see the
recorded files in the UCCX.
Please help me out!!!
Thanks & Regards,
Krishna

It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this. I am running windows 8 on parallels.

Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

It was working untill i did the update

My w2207h HP Monitor is not working on my macbook pro with hdmi minidisplayport adapter. On Windows 7 via bootcamp it works. What can i do ?

As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !

If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility. Select the DVD and then hit the "New Image" button. Disk Utility should offer to create a disk image from the DVD. I would put that disk image on a USB drive connected to the Pro. You should be able to mount that image when you connect up to the Air. Hopefully BootCamp will be able to access that all through the process.
If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows. I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB.
I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see. But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive. While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem.

Sql Monitor is not working for forms10g

Hi All,
Sql Monitor is not working for forms10g.How can i solve this problems.
Regards
Gopinath M

using sqlmonitor i have traced the forms 6i (.fmx),in this case toad additional
software sql monitor is automatically added the frmbld.exe in application.
whatever i am doing in forms runtime the sqlmonitor provide the sql query.
for examble i am opening the lov with the help of F9.Now the sqlmonitor trace
the sql query for that lov item.so its very helpful to see the query without
the source(.fmb).
Now the problem is the sqlmonitor is not added the iexplore.exe in application.
because it added frmbld.exe only not for iexplore.exe.but the 10g forms are
running from the explorer.is there any other forms trace method is available
pls kindly guide to me.

Dead Line monitoring is not working

Dear Friends ,
I have the belwo issue in my workflow . Deadline monitoring is not working in my workfloow.
Details of the Issue : --
I have a Dialogue step in my workflow , which sends workitems to the user .
Once workitem has cometo the user's SAP inbox it is in ready status . The user has not taken any action on that .The time perido mentioned in the " LATEST END" is 2 minutes , so the workitem should show " The follwoning deadline was missed latest end " for that workitem in theuser's sap inbox .
But this is not happening .
I have used this deadline monitoring concept many times , but i do not know wht is happening here .
Can any body please help me on this to sort it out .
Reagards
Prabhudutta

Hi Prabhudutta,
I think you have done all the necessary steps!
In such case what I feel the problem could be because of some minor thing that we might be missing...
Can you please check the below link and confirm if you have followed all the steps that it states:
http://****************/Tutorials/Workflow/DeadlineMonitoring/DM1.htm
Hope this helps!
Regards,
Saumya

Component monitoring is not working sap pi 7.31

hi friends,
we are using PI 7.31. after restarting the system suddenly component monitoring in (NWA--PImon) stopped working and even RWB -->component monitor is not working. No users are locked(RWBUSER,AFUSER)...and remaining all webpages are opening except this.Inside Exchange Profile we have user FQDN as well. SLDCHECK working fine and SM59 Destinations also working fine,
i am getting HTTP 500 connection timed out error.
please suggest me.
thank you
regards,
loordh.

hi Iñaki Vila and Jannus Botha,
thanks for your replies.
i am getting below error when i checked NWA logs and OS level logs
Exception caught by adapter framework: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
and regarding notes, i verified all and settings were OK and after PI restart as well no issues.
please tell me some more places where i can see.
regards,
Loordh.

Deadline monitoring is not working

HI,
i had requirement to change the text displayed in the decision step type. I copied that task using pftc and changed the description and i replaced the new task number with old one. the deadline monitoring is not working for the new task .
Please anybody have idea about why deadline is not working for the new task ?
advance thanks
regards
paveee

Hi Praveen,
Deadline is failing only for this workflow? Or is it failing completely in the whole system. Just create a small dummy WF with a standard decision step (or some acitvity) with deadline monitoring activated and see if it fails there also.
<b>If deadline monitoring is failing in all workflows</b>
Can you just check whether the scheduled report RSWWDHEX are executing properly. You can check it in SM37 for user WF-BATCH. Also check in ST22 if there are any dumps for report RSWWDHEX (for user WF-BATCH).
<b>If deadline monitoring is not failing in other workflows</b>
In your activity where you have put your cutom task goto the "Outcomes" tab an check if the outcome for your deadline monitoring is "Active" (This may not change but just have a check)
Also can you let us know what are the steps that you are using in your modelled outcome? Just suspecting if the first step in your modelled outcome is going to error (which is not displayed in log).
Thanks,
Prasath N

Pavilion IPS LED Backlit Monitor 27xi not working

Similar Messages

Maybe you are looking for