Pavilion m7570n, INSTALLED WINDOWS 7 and now my DVD/CD is not working

Computer: Pavilion m7570n
product name for the DVD/CD drive: HL-DT-ST DVDRRW GSA-H20L ATA
Converted computer from Windows XP to Windows 7
In device manager, I have a yellow explanation mark next to my dvd burner and dvd player.  I've tried all the reinstalling and updating driver options.  It comes back that the drivers are up to date.  I can not see the the drives on "my computer."  Any recommendations

This is usually  a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
Manually delete the registry entries
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
UpperFilters
LowerFilters
Step 1: Start Registry EditorStart Registry Editor
Start Registry Editor...type "regedit" into the run box on the start menu.
Step 2: Delete the UpperFilters registry entry
In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
Expand SYSTEM, and then expand CurrentControlSet.
Expand Control, and then expand Class.
Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
In the details pane of Registry Editor, on the right side, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?
Step 3: Delete the LowerFilters registry entry
In the details pane of Registry Editor, on the right side, click LowerFilters.
Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
Exit Registry Editor.
Step 4: Restart your computer
Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

Similar Messages

  • I installed mountain lion and now my kodak printer is not working.  Any sugestion please

    i installed mountain lion and now my kodak printer is not working.  Any ideas? please help

    What errors do you see?  The /var/log/cups/error_log file might have some more information.

  • Installed itunes 6 and now CD/DVD drive won't work at all

    I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Inspiron 5160
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: ASAPIW2K (6.0.2.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
    IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY DVD+-RW DW-D56A, Rev PDS7
    Drive is empty.
    E: ROXIO DVD-ROM EMULATOR, Rev
    Drive is empty.
    If anyone has a solution for this stupid problem that would be great.
    Thanks

    Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
    To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
    http://support.microsoft.com/default.aspx?kbid=290301
    Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
    There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

  • I recently installed WIndows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

    I recently installed Windows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

    update your scanner's driver.  ie, see if hp has a win 8 driver for that model.

  • I installed Windows 8 and now my ipad does not show in itunes...any thoughts?

    I installed Windows 8 and now my ipad does not show in itunes...any thoughts?

    Not trying to start any argument here, but if you would have checked the requirements for using an iPad with iTunes on a computer, you would have seen that Windows 8 is not supported.
    Apple ID (required for some features)
    Internet access6
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
    Download iTunes at www.itunes.com/download
    http://www.apple.com/ipad/specs/

  • I installed windows 8 and now I have no sound. Microsoft says I need a new driver from HP,

    I installed windows 8 and now I have no sound. Microsoft says I need a new driver from HP, Which is no aval. yet. how do I get notified when its avalible? My model # is G60-549DX

    Have you tried your Windows 7 driver to see if it will work?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4064...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    Back to Snow Leopard from Lion install method
    Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
    Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
    If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
    Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
    Here we go!
    Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
    Look at the Utilities Menu for Disk Utility.
    On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
    This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
    When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
    When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
    Update OS X to 10.6.8 using the Combo Update for best results.
    http://support.apple.com/kb/DL1399
    (Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
    Final step optional but highly receommended.
    A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version..  (in addition to TimeMachine drive for more immediate backups.)
    It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

  • I installed iTunes 10.5.3.3 and now my DVD player won't work.

    I installed iTunes 10.5.3.3 and now my DVD player won't work and has this error:
    This device cannot start. (Code 10)
    Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
    Any ideas why iTunes renders my DVD drive unusable?  I have uninstalled and reinstalled iTunes and when reinstalling I had my device manager open and saw during the installation how my DVD player went from accessible to not being able to start.
    Why is this happening? 
    Here is my computer information:
    Dell
    Latitude D630
    Intel Core  Duo CPU T770 @2.40 Hz
    4.00 GB RAM
    32-bit Operating System
    Thank you,
    Kelly

    There's a few different possibilities with a code 10, Kelly. To narrow in on the likeliest culprits it would help to have a closer look at your system.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

    I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

    You're welcome. 
    But, no, don't look to  Epson for fixes to their  driver in newer versions, and Adobe has deprecated the TWAIN plug-in.  Hoping for a solution there is futile.  That has not happened and it's never going to happen.  The consensus is that it's pretty foolish to tie up Photoshop to scan.  Honestly.
    Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
    You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever.  When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software.  If you think about it, its most inefficient.
    VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist.  VueScan is not free, but it's a pretty good value, IMO.
    As for the Epson CD printing software, I have no clue.  Sorry. 

  • I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

    I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

    Snow Leopard cannot run on a PPC G5 Mac as it requires an Intel processor. Please confirm what Mac you have.

  • I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need?

    I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need? Also can I change the picture of the login screen? That grey mat looks ugly!

    As posted by Ham on July 29 @ 9pm on this thread <https://discussions.apple.com/message/15786976#15786976>.
    Official statement from Apple:
    http://support.apple.com/kb/ht3152

  • HT204210 Updated to Yosemite 10.10.2 and now my Photoshop CS5 is not working. What can iI do?

    Updated to Yosemite 10.10.2 and now my Photoshop CS5 is not working. What can iI do?

    Install the After Effects CS6 (11.0.4) update:
    http://adobe.ly/DVA_updates

  • I updated to java 7 and now my yahoo games will not work, how do i fix this?

    i updated to java 7 and now my yahoo games will not work, how do I fix this?

    kathieaross,
    click on the Java pane in System Preferences. When the Java Control Panel window opens, click on the Security tab, and set your Security Level to Medium — that will allow “untrusted” applications (i.e. those without certificates from a trusted authority) to run. Press the Apply button in the lower-right corner to confirm the change, then press the OK button to close the window.
    Apparently your Yahoo! card games don’t have certificates associated with them, which is why the default security setting of Java SE 7 Update 51 didn’t allow them to run.

  • I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    I am seeing if I can get another battery even though I do not believe that is the issue.  It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery?  It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage).  When just sitting idle it doesn't seem to turn off until that 55-60% mark.  It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
    Any other suggestions would be helpful... and I will get back to you if a new battery helps.  Thanks!

  • I've just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working

    Hi everyone! I’ve just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working. When I went to the support site, I found that there are no drivers for Windows 10 yet!! Only drivers for Windows 8.1 are available. Please provide the drivers for Windows 10, otherwise I’m not able play sound from my machine. Can someone please help? Thanks.

    Try to install latest Realtek 2.79 version:http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High Definition Audio Codecs

Maybe you are looking for