Pavilion TouchSmart PC 20-f323, how to boot from a DVD?

My client has a HP Pavilion 20-f323 TouchSmart PC with Windows 8 on it and wants to downgrade and install Windows 7 Pro instead.
However, my first question here is, how do I boot to my Windows 7 Pro DVD on the TouchSmart PC? I cannot even find a boot menu option to boot from the DVD player.
Any other URLs pointing to this downgrade process would be appreciated!
Thank you very much for your time.
This question was solved.
View Solution.

****Disclaimer*****
HP doesn't recommend the installation of Windows 7 on a computer shipped with Windows 8, nor will it support the installation of Windows 7. HP will not provide Windows 7 drivers and suitable drivers may not be available for the hardware in the computer. Also, Windows 7 may not support some of the hardware or software features designed for the computer.
Make sure you create your HP Recovery Discs or USB Flash Recovery media before modifying or changing ANYTHING.
You will need to purchase a new copy of Windows 7 with a valid COA and product key.
The screen shots below are from an HP 15t-j100 notepad computer... the options and configuration screens on your computer may differ.
You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "BIOS Secure Boot configuration" on the settings page similar to what is shown below, before you can attempt to install Windows 7;
After saving the changes, the computer will request that you confirm the changes... Accept the changes by typing the four digit code and pressing the "ENTER" key.
If are you are installing from a USB stick and see a "Load Driver - a required CD/DVD drive device is missing" message, this is because "System Configuration" > "USB3.0 Config in Pre-Boot" is set to "Enabled". This must be set to "Auto". This should clear up the CD/DVD device missing.
Additionally, as the hard drive is most likely partitioned as GPT, you must boot using the UEFI-Internal CD/DVD or UEFI-USB Key/Drive to install Windows on a GPT partitioned disk. Turn on or reboot the computer and tap "F9" or "ESC" and then "F9" when prompted. Highlight the UEFI boot source you are using and press "ENTER".
I suggest using Windows 7 SP1 for the best intallation experience. If you need Windows SP1, please see "How to Install Windows 7 Without the Disc" to download and create your own Windows 7 SP1 disc. If the DVD refuses to boot as UEFI, you may need to use a USB Flash drive (may require DISABLING "Fast Boot" in the BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid UEFI enabled USB Flash drive if it is formated as NTFS and may require a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installer, or WiNToBootic. I like Rufus, as it has options for "GPT partition scheme for UEFI computer" and "FAT32".
From the top...
1) Turn on the computer and immediately start tapping the "ESC" key.
2) When the MENU comes up, press the "F10" key.
3) Navigate the BIOS to "System Configuration", "USB 3.0 Config in Pre-OS" and set to "Auto".
4) Navigate the BIOS to "System Configuration", "Boot Options" and set "Secure Boot" to "Disabled" and set "Legacy Support" to "Enabled".
5) Press "F10" and click "YES" to "Exit Saving Changes"
6) Computer should restart and display "Operating System Boot Mode Change"... type the four digit code and press "ENTER".
7) Let Windows 8 boot-up and place the Windows 7 SP1media in the DVD drive or USB port, then log-off / shutdown.
8) Turn on the computer and immediately start tapping the "ESC" key.
9) When the MENU comes up, press the "F9" key and then select the correct UEFI boot source (Internal CD/DVD drive, USB CD/DVD drive, USB Flash drive, etc.)... Press any key to boot CD/DVD, if prompted.
10) Select "Language", "Time / Currency", and "Keyboard" settings and then click "Next"
11) Click "Install Now"... check "Accept Terms" and click "Next". Click "Custom (Advanced)".
12) You may need to supply AMD SATA/RAID drivers at this time... Download AMD Chipset Drivers (Chipset / AHCI / USB 3.0)
13) "Where do you want to install Windows 7???" Select "Disk / Partition" with "Unallocated Space" you created earlier and click "Next".
14) Follow all prompts and answer as needed. Enter Windows 7 key when requested.
Please post the Windows Device Manager's "Hardware Ids" (just the text) for all remaining missing or unknown devices as shown in the example below;
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Win 7 pro installed on hp touchsmart 320-1030, the machine cannot boot from installation DVD. Assist

I have installed Win 7 professional on hp touchsmart 320-1030 with an OEM DVD to overwrite Win 7 premium preinstalled from factory.
I want to reboot the machine with the same DVD after completing the installation, to test for possibility of reimage in case of crash. Although in bios, I specify cd\dvd as firts boot media, the machine cannot boot from installation DVD. I have 20 machines that behave this way. Can anyone assist?
Note: I had to delete all partitions on the PC before doing a fresh installation of Win 7 pro as Premium can not joing domain.

Hello,
So, you installed Window 7 Pro with a DVD, you boot with it to install the O.S, and now it does not work?
Have you tried to load the BIOS default values or even updating the BIOS?
If it had work before, cant understand why it does not work now...
Let me know.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Solaris 10 - how to boot from the dvd media

Hi,
Could any body guide me on how to prepare the dvd media for solaris 10 installation? I downloaded the 5 dvd images and have no idea on how to put them together on a single dvd to boot from it. I zipped all the dvd's and burned them on a dvd but it doesn't boot from the dvd. Any help will be most appreciated. I can't wait to use solaris 10. Thank you.
OC

That is true, but remember that you are doing this in DOS and the file names and locations have to be right. I put the 5 files into a root directory and just renamed them 1, 2, 3, 4 and 5.
copy /b 1 + 2 + 3 + 4 + 5 file.iso
file.iso would be the name of the resulting image. You can use anything, i.e., solaris10.iso instead of file.iso if you want.

How to boot from DVD & how to force eject DVD

Hi,
Just installed a new HD on my MBP. I inserted the leopard DVD and it was spinning for about 2 minutes and then nothing happned. Just black screen. Now I tried starting holding the C key down. Nothing. I tried starting holding the eject button down, no eject of the DVD. I tried holding the button below the tracklpad down, no eject of the DVD.
How to boot from a DVD?
How to force eject DVD?
What am I doing wrong?

I hope you get an answer to this as I'm sturggling to
A) start my computer as it just goes to a grey screen
B) Force Eject a DVD
Someone suggested the below on another thread, it didn't work for me but maybe it will work for you.
http://discussions.apple.com/thread.jspa?messageID=5869652#5869652
Re: Stuck on Grey Screen.. Won't Boot
Posted: Nov 16, 2007 1:34 PM in response to: aliray10 Reply Email
(I don't have my (no-longer booting) iBook in front of me to check this, but I think this is what I did last night....)
Boot single user -- hold down "cmd-S" immediately after you turn the computer on.
"diskutil list" will give you a list of your disks. My CD drive was disk1.
"diskutil eject disk" should eject the target disk.

HP Pavilion TouchSmart 14-b109wm Sleekbook will not boot up

My HP Pavilion TouchSmart 14-b109wm Sleekbook will not boot up windows.
upon power it goes to a blue screen that reads "Recovery" your pc couldnt start properly.
Error code 0xc0000185. Youll need to use the recpvery tools on yout installation media
Ive read several forms on performing the recovery and tried but im getting nothing.
Any ideas on how to proceed from here.
It doesnt have a cddrive so we have no backup disks.
the warranty was up sept 2014 and it went dead december
vey disapointed in hp
an help wuld be greatly appericated

Hi @gjtomlin ,
Thank you for visiting the HP Support Forums and Welcome. I have read that you are interested in re-install the operating system back on your HP Pavilion TouchSmart 14-b109wm Sleekbook. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Here is a link to computer won't start for Windows 8.
You might benefit from a Windows 8 refresh.
It load defaults on the Notebook without disks. Here is a link to your drivers and software page.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

How to Boot From an External HD

I am still pondering getting a mini - I know that I will want a much larger hard drive (since I want to use it for media and will keep tons of video and music on it). I would like to know how to boot from an external hard drive. I've searched google, the forums, and apple support, and see people mention it all the time, but can't find out how to do it, etc. Is it just like running off my normal HD but all the files are kept on the external (so I could still access files thru itunes, etc.)?
Also, I would like to get a 500GB+ drive to keep my files on, and was wondering if people had recomendations. Brands, USB 2.0 or Firewire, etc.
Apologies if this is a novice question - but I can't seem to find answers anywhere.
Thanks in advance.

Firstly, it is certainly possible to boot from an external drive, so what you plan is not only feasible, but since the external would be faster than the internal drive, also rather beneficial to the efficient running of the mini - meaning, the system will be notably faster in use.
In my view, the best option is an external firewire drive, not USB. The reason is that FW has it's own dedicated controller while USB doesn't. In effect, it means that FW data transfer speeds are stable and consistent, while USB rates vary widely, depending on what else the system is doing.
Once you have your external drive connected, the easiest way to make it bootable is to copy your existing MacOS install from the internal drive using software such as Carbon Copy Cloner (downloadable from www.versiontracker.com). This will avoid having to do a lengthy reinstall. Once MacOS is copied, then open System Preferences, and the Startup Disk preference pane, and click on the external drive icon. The next restart will then be directed to the external.
Once you have booted from the external drive, you use it just as you would an internal, and MacOS will treat it as the boot volume, including by default, placing your user account folders on it, including your documents, music etc.

How to boot from external Hardisk where sap is installed

Hi friends,
I have an External Hardisk where SAP is installed in it i.e., Win 2003 on C drive & SAP on D drive.
In my laptop Win XP is there, but I am trying to boot with External Hardisk where Win 2003 is installed.
I am selecting to boot from External Hardisk where Win 2003 is installed but it shows the Win 2003 booting screen and the next moment screen becomes black.
So can anyone help me How to boot from Hardisk.
Thanks
santhosh

Hi,
You can not boot OS from USB devices in Windows.
Create the separate drive on your existing disc and install windows on that drive and use ur USB disc for installing SAP.
Hope it'll help u....

How to boot from USB flash drive - Portege R500

Hi,
I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
Any help would be really appreciated

Hi
As far as I know it should be possible to boot from USB FDD
Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
Generally you could try to press F12 button when notebook powers up.
Then a boot menu should appear on the display and you should see all bootable devices.
PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
Greets

Help please: how to boot from clone/external hard drive because "disk cannot be partitioned because some files cannot be moved"?

MBP Retina 15" MID 2014 2.5Ghz
OS X Yosemite 10.10
I have a external HDD and want to erase and restore my laptop so I can install windows via Bootcamp Assistant but I don't know how to boot from a clone to fix the issue and am not sure if when I erase and restore I will still have Yosemite 10.10? I have no way to reinstall the OS if I lose it. An average user friendly guide would be greatly appreciated please

I do not think you have to erase your MacBook's disk in order to install Windows. First of all you can try a few things before formatting the disk.
The first thing you should do is to check that your MacBook Pro's drive is OK with Disk Utility (in /Applications/Utilities). After opening it, choose "Macintosh HD" in the sidebar and press "Verify Disk". If it gives you any error, you will have to boot your Mac in OS X Recovery (press Command and R keys while your Mac is starting up) to repair Macintosh HD (the steps are the same but pressing "Repair Disk" instead of "Verify Disk").
After you have repaired the drive, boot up in OS X and try partitioning the drive again with Boot Camp Assistant. If it does not work, you will have to format the drive and reinstall OS X, but I will give you these steps only if this does not work.

Os9 upgrade failure, How to boot from cdrom

hello world... following the instructions... almost...
on the Ultra 5 running os8 I input-ed init 0 boot cdrom from the OK
prompt for an os9 upgrade. 1/2 way done install quits. (new feature?)
now system boots for about 20 seconds & then reboots cycling.
I am not able to stop the process so that I can get an >OK prompt
for another attempt.
question.
How to boot from the install CD and prevent system from
'cycling' infinitely < arrgh!>

press the stop key and the a key at the same time. the sun will stop at the ok prompt.

Hyper-V VM Generation 2 - How to boot from .ISO

Hi guys,
Server OS: Windows Server 2012 R2
I have a VM Gen2 with following settings:
I can boot fine from the same .iso from a Gen1 VM so the .iso is bootable.
I know that the Gen2 VM uses SCSI instead of IDE, but I have no clue regarding how to boot from the .iso..
Any ideas?
Thanks in advance!
Best regards,
Kenny

Hi,
Please confirm your image fixed the EFI boot comment. You may facing the following issue.
Hyper-V VM Generation 2 - How to boot from .ISO
http://social.technet.microsoft.com/Forums/en-US/29574a12-7528-4f49-ae12-6fe1d85b3732/hyperv-vm-generation-2-how-to-boot-from-iso?forum=winserverhyper
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to boot from SCSI in Virtual Machine

hi
i have VM's in Hyper V windows server 2012 data center edition.
i want to boot from SCSI drive for performance enhancement.
but when i select scsi then it doesnt boot and says boot failure no boot device found.
also tried with bios settings of VM but there is no option to select boot from SCSI.
so can anyone help me how to make it happen???
how to boot from SCSI drive in VM???
thnx
istiaq

Generation 1 virtual machines cannot boot from the virtual SCSI chain and 2012 does not support Generation 2 VMs. There is no meaningful performance difference between the virtual IDE and SCSI controllers anyway.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think."

How to boot from cd for G5 system

I am planning to install 10.7.2 on G5 System plz. help me how to boot from CD

Mac OS X Lion (10.7) will NOT run on a PowerPC G5 system. Leopard (10.5) was the last version of Mac OS X that supported the PowerPC CPU chip.
You need an intel based Mac for Mac OS X Lion 10.7

How To Boot From CD in XP Pro?

I want to boot from disc so I can install a new Vista instead of XP, but I can't figure out how to boot from disc at start up. When I choose to boot from my windows HDD, it doesn't give any chance to boot from disc (no "press any key" or bios)....help?
Message was edited by: kimbahpnam

Hi,
with the Vista CD inserted reboot your Mac and hold down the 'Option/Alt'-key.
In the following Selection Screen farthest to the right should be an icon of a CD labelled "Windows".
Click on it and your Mac should boot from the CD.
If the CD-icon is not shown, then most likely the Vista CD isn't bootable for whatever reason.
Regards
Stefan

Pavilion TouchSmart PC 20-f323, how to boot from a DVD?

Similar Messages

Maybe you are looking for