Pavilion tx1000 hard drive won't fit 2.5inch IDE cable

Hi everyone,
My Pavilion tx1000 laptop isn't booting up and I've since bought a new laptop, however I'd love to retrieve all my data on my old Pavilion laptop hard drive.
I bought an IDE to USB cable thinking I could connect it to the hard drive, however this doesn't fit. My cable has IDE 2.5inch and also 3.5inch but neither fit. It also has a SATA connector but that's way too small (I tried to get a cable with all the possibilities! no such luck).
So now I'm wondering, what IDE cable do I need to fit this laptop hard drive? Anyone know? That would be great. All I want to do is be able to get my data off there!
Thanks for your responses.

Hello @vic3394,
Here is a list of the hard drives along with part numbers compatible for your notebook:
Hard drive
Description Spare part number
5400-rpm, 160-GB 441128-001
5400-rpm, 120-GB 441127-001
5400-rpm, 80-GB 441126-001
5400-rpm, 60-GB 441125-001
You can find this information in the Maintenance and Service guide, for your notebook.
I hope this is able to help you.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Similar Messages

Can my macbook 4, 1 handle a 2tb hard drive if it fits into the hard drive bay?

Can my macbook 4, 1 handle a 2tb hard drive if it fits into the hard drive bay?
Does the hard drive brand matter as lon as the har drive fits in the slot?
I want to put a 2tb hard drive in my macbook 4, 1 but I am not sure if the hard drive will work.
Can my computer handle that big of a hard drive?

"If it fits" will be the limiting factor. The largest capacity that I know of that will fit is 1.5 TB.
OWC sold this 1 TB 12.5 mm WD hard disk a while ago that allegedly fit your MacBook4,1 so it stands to reason you won't be limited to a 9.5 mm dimension. The only 2 TB drives that I know of are 15 mm thick and will definitely not fit your MacBook. If and when you can find a 2 TB HDD in the required form factor it will work.

External Hard Drive Won't Mount- Need to recover files

Hello Everyone,
I am hoping that one of you fine mac experts may be able to assist ~
Problem: External Seagate FreeAgent Desktop USB external hard drive
won't mount on desktop=ie: no access to my important files.. Please Help!
Details:
External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
(using for document / file backup-not as a startup disc)
on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
~
Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
and got the "beach ball of death" and needed to restart.
My trusty G3 started up fine, however, the external HD was now
not showing up on the desktop as normal. I troubleshooted -by restarting,
trying different a/c plugs/ different USB ports , ran disk utility..called
seagate -not much help . Seagate said to try the HD on another mac-which I did-
a G5 tower- same problem.
~
The External hard drive will show up in disk utility, but is grayed out.
and when click "mount" same two messages keep showing:
message 1: "a disk attempting to mount as unknown has failed verification or has failed to
mount.please use disk utility to check the disk"
~
message 2- when unplugging and repluggin the usb in-and upon
restart:" you have inserted a disk containg no volumes that mac osx
can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
~
( I really need access to these files- and do not want to re-initialize the HD!!)
I ran Disk Utility /first aid "verify & repair , the following info came up:
Repairing disk "main backup 2007 ".
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid key length ( <<<IN RED )
Repair completed. "
~~
Though it said the repair was completed, the "invalid key length" issue
still comes up when re-running disk utility...Hard drive would still not
mount on desktop-even after restarting .
~~~~~
If there is a mac genius out there that can help?- it would be greatly
appreciated. I have tried to call seagate several times in the last several hours-
1st time-they disconnected me after being on hold 10 minutes-2nd call
I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
~~~
At this point, I am hoping to just get the files and photos off
the hard drive- I heard about Disk Warrior-should I use that and if so
what version?
Thank you very much!
L

Will zapping the PRAM be of any use in getting the external to mount on the desktop?
Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
Have you ever used Disc Warrior and is using it complicated?
I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
My other thought was to take the external HD there and have them try to recover the files.
Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

External hard drive won't mount, even after disk repair.

My Toshiba external hard drive won't mount on my MacBook Pro 10.8.5. I can see it in my disk repair, and when I repair, "the partition map appears to be ok." But I can't access the icon to be able to open the hard drive contents on my desktop. Help!

Hello maccynicwhoalwayshasmacs,
Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
USB and FireWire Quick Assist
Thanks for using Apple Support Communities.
Have a nice day,
Mario

New hard drive won't recognize my iPhone

My hard drive crashed and my replacement hard drive won't recognize my iPhone. I can see all my content, but can't move or replace it. I was able to access content on my iTouch just fine and luckily synched my contacts back into my laptop, but no dice on the phone. Any ideas? BTW, my phone is a jailbroken original iPhone and I am not particularly proficient with this kind of stuff.

Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238

External hard drive won't appear on my desktop

I'm trying to run a backup, but my hard drive won't appear on my desktop. I see it in Disk Utility, so I know it's there...
...any suggestions?
Thanks,
kevin

Kevin - There might be a few reasons as to why your external drive won't appear have you tried any of these suggestions:-
STEP ONE - Confirm that the drive is being seen by the system
Click the Apple icon and select About This Mac.
Click More Info.
Select the Drives and Volumes tab.
If the Iomega Hard Disk drive is not listed under the USB/FireWire arrow, proceed to STEP THREE.
If the Hard Disk drive is listed, continue with the next step.
STEP TWO - Format the Hard Disk drive to Mac HFS format
The Iomega Hard Disk drive is factory formatted to FAT32 for maximum compatibility. If you have not reformatted the disk or the disk is formatted to FAT32:
The disk may mount very slowly in OS X if the disk is FAT32 formatted.
Mac OS X will not mount any DOS (FAT32) partition larger than 128GB. For more information, please check the Apple® Web site at http://docs.info.apple.com/article.html?artnum=107483
Warning: Erasing your Hard Disk drive will erase all of the information stored on the disk. If possible, back up your data before erasing the hard drive. Mac formatted disks are not cross compatible with other operating systems, such as Windows®, without the purchase of additional third-party software.
Double-click the Mac hard drive icon.
Double-click the Applications folder.
Double-click the Utilities folder.
Double-click the Disk Utilities icon.
Highlight the drive in the left window.
Click the Erase tab.
Select Mac OS Extended.
Click the Erase button and then click Erase from the confirmation window.
If the Hard Disk drive now mounts, you are ready to use the drive.
If the Hard Disk drive does not mount, continue with the next step.
STEP THREE - Are the Mac OS X drivers detecting the drive properly?
The Iomega Hard Drive may not mount if you are using Mac OS X versions under 10.1.3. If you are not using Mac OS X 10.1.3 or higher, please visit the Apple® Web site at http://www.apple.com/macosx/ for information on getting the latest version.

After installing snow leopard my external hard drive won't show up on screen or backup

Afer installing leopard my external hard drive won't show up on my desk top. It also won't backup my hard drive with time machine. I need help.

Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD. Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on. Hope this helps.

External Hard Drive won't turn on

Hi all,
I have just bought a brand new iMac and a new Western Digital 1TB External Hard Drive to use Time Machine on. I have plugged it all in, done my first back up and it all went fine.
Then, I turned off my computer and all the plugs to go to bed as usual, now when I have come back to it in the morning the Western Digital Hard Drive won't turn on! It's all plugged in and fine, but no life at all.
Has anyone else had this? Can anyone explain or help?
Thanks

Hello Simon. I'd do what Barry Hemphill has suggested and try to return or RMA the drive.
Did you buy the drive from a store or online? I believe the fault would not be fixed by any apple updates as it seems to be a hardware fault rather than a software one from what Ive read.
Is this the drive? http://www.wdc.com/en/products/Products.asp?DriveID=357
Does it work when connected via USB at all? I had issues with a firewire drive sometimes not showing up so I switched to a USB interface and it worked fine sinc then.
Good luck!

External hard drive won't shut down after switch from OS10.5 to OS10.4.11

i recently chanded my OS from 10.5 to 10.4.11 (as a programme i want to use is not compatible with leopard), but since i have done this my external hard-drive won't shut down automatically when i shut down my mac. i have to switch it off at the plug instead.
can anyone suggest how i can get it to do this again?
i'm a little concerned that i'm damaging the external drive by turning it off manually all the time..
thanks

Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected]

External hard drive won't unmount for disk utility.

Im not sure if this is the right topic area but I have a white macbook and my external hard drive won't unmount. I want to erase it via disk utility but it keeps telling me other programs are using it.

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.

WD 3.0 external hard drive won't mount to Mac

I've had this Western Digital 3.0 external for some time and now it won't mount. I'm running Yosemite on my iMac. Full disclosure, I did drop the drive a day before it stopped being recognized on the Mac but it wasn't a hard drop and the external drive was running just fine immediately after the drop. I've seen some posts on here talking about WD external drives not working after updating to Mavericks but I didn't have that problem.
I've zapped the PRAM.
I've made sure it wasn't the cable - I have another 3.0 drive that mounted just fine using that same cable.
This WD external drive is self powered so it's not a power source issue.
I've tried updating the Firmware but since the drive isn't mounting, that did no good.
The USB port on the Mac is fine - plugged in another drive and other devices in that same port and they are all recognized and working fine.
Just to make sure, I tried using another port. No different result.
I tried the Option key on a restart to get to Disk Utilities but it's not seen there.
While the drive was working, I was pulling music from iTunes to my iPhone, just loading it up for a trip. I keep all of my music on this one WD external hard drive. I loaded up about 70 songs and intended to load dozens more. While pulling some songs over, things froze up. Wasn't able to do anything in iTunes or, as best I recall, anywhere else. Things just froze. I hard restarted the Mac - via the power button - and since, the external drive hasn't mounted.
About ready to try this possible solution as described in this discussion:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
Soooooooo . . . help would be appreciated!

Hello
Ihad EXACTLY the same thing happen to my WD hard drive... MINUS the dropping.
Was organising my iTunes and iPhoto library, kept crashing, over and over again, then the last time, i restarted and it won't mount.
Except not only is the WD hard drive not mounting, after the crash and restart of itunes etc neither is my Time Machine hard drive which is connected via a LAN cable.
Exactly the same scenario, all the ports work, all the cables are fine etc.
Just went BOOM - not happy and stopped working.
All my photos and music are on this one drive.
Did you manage to fix your issue?

Hard Drive Won't Mount After Repair by Second Computer

I have an G4 Cube with OS 10.2 on the internal hard drive (which is full) and OS 10.4 on an external La CIe hard drive (that I use as my main OS). The external hard drive accumulated serious damage that couldn't be repaired by Disk Utility on the internal drive. My copy of DiskWarrior X would not run under OS 10.2 (10.4 was required) and it wouldn't boot from the CD either So I connected the external hard drive to my second computer, an iMAC running OS 10.5. (Unfortunately, I disconnected the external hard drive when the computer was off instead of ejecting the drive by dragging it to the Wastebasket.) The external drive mounted and DiskWarrior easily constructed a new directory, defragmented the files, and eliminated all of the damage on the external hard drive visible to Disk Utility. However, when I reconnected the repaired external hard drive to the G4 Cube, the drive wouldn't mount. Privileges were repaired on both computers with the external drive connected without helping. Being repaired while connected to a higher OS or perhaps simply being connected to a higher OS seems to have left the LaCie external hard drive in a state which couldn't be mounted by an earlier OS.
Following this hypothesis, it booted the G4 Cube from the OS 10.4 Installation CD while the LaCie external hard drive was connected. When I cancelled installation of OS 10.4, I was asked to choose a start-up disk AND OS 10.4 WAS NOW MAGICALLY AVAILABLE ON THE EXTERNAL DRIVE. Simply starting up from a more advanced OS allowed the hard drive to mount.
Shockingly, when I restarted from OS 10.2, the external hard drive was still mounted. Whatever was preventing the drive from mounting was a TRANSIENT STATE, not backwards incompatability.
POSSIBLE LESSON: If a hard drive won't mount on computer A after being connected to computer B, consider booting computer A using the OS on the installation disk from computer B.

If you need to repair a hard drive with OS X installed on it, you must use that same version of OS X to perform the repair. Using another--in this case, newer--OS can cause quite a bit of trouble, as the directories/permissions may be dealt with differently between the OS's.
Seems you've learned this lesson--and luckily you didn't lose anything!
~Lyssa

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

HT5622 My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?

My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?
After holding down the Select and Play/Pause button, I was able to restart the Ipod and then it brought me to a Diagnositc test. I have tried doing both the Mannual and Annual test on the ipod however in each test, the ipod freezes on different access tests. The HP (headphones) test, shows the headphones are detected, but then if it tries to play a song to make sure they work it freezes and goes back to the red cross. I have looked at various other questions regarding the FW cable, however I don't believe i have such a cabel. Then the Hard Drive test freezes up and I can hear a ticking noise coming from the drive but it doesnt seem to be spinning. Alongside these test issues, any computer cannot see the Ipod when plugged in (including itunes). Therefore some tests for the USB drive cannot be completed. I do not recall dropping it badly, though I have dropped it previously. Does all this mean there is damage to the drive? Should I instead take it to an apple store?
Many Thanks

The stats look fine. Try the DFU Restore method shown in Corrupt iPod classic. It may pay to disable any anti-virus software and use the staged transfer method to reload data, assuming you get that far.
tt2

Lacie Hard Drives won't mount

My two Lacie hard drives won't mount on my G5 running Tiger. They were fine on my G4 iMac running Panther. I've tried using the Lacie Update Tool but the drives aren't recognised. I've tested the firewire cables on another drive that works and they're fine, so it's not cables.
Both drives power up okay and whir into action, but just aren't talking to the G5.
Lacie d2 HD 80GB FW DV
Lacie 40GB (no model number, "DESIGN BY F.A.PORSCHE", no model number).
Any ideas much appreciated.

Reply
This happened to me with a LaCie external drive as well.
The problem is that LaCie formats the drives as PC-based
and not Mac Extended, so unless you reformatted the
drives to Mac when you started using them, your access
to them on any Mac may result in a failure to mount.
Once that happens retrieval of data is made more difficult
because of this formatting incongruity.
There is no way you can get the data once your G4 quits
mounting them. If you can get the data off of the drives,
back it up and then reformat the drives using Mac's Disc
Utility. Then you can reload the data and I suspect all of
your Macs will then mount the drives via Firewire.
Good Luck!
My two Lacie hard drives won't mount on my G5 running
Tiger. They were fine on my G4 iMac running Panther.
I've tried using the Lacie Update Tool but the drives
aren't recognized. I've tested the firewire cables on
another drive that works and they're fine, so it's
not cables.
iBook G4 Mac OS X (10.4.4)

Pavilion tx1000 hard drive won't fit 2.5inch IDE cable

Similar Messages

Maybe you are looking for