Pavilion223 All in One-Can't dowload my boarding pass.

Can't download my boarding pass. Note says Adobe Flash not installed "click here to install" (which I did).  Further note said Adobe Flash already installed in Widows 8. Now what???  This is a sudden problem - only 2 wks ago I  got a boarding pass with no problem.

Dunidar, Thanks for your response and, hopefully, your help. However, if you are responding on behalf of HP Customer Service, you should know I was told by HPCS that my computer is out of warranty (by a couple of months) and I would have to pay for tech support . I can't afford the tech charges for the next year nor the cancellation fee if I discontinue service before the year is up.  That's my sad tale.
If you can help, the product no is 23b034; running on Windows 8 -64 bits. Thank you.

Similar Messages

  • HP8500A all-in-one can no longer scan thru wireless network but prints fine.

    HP8500A all-in-one can no longer scan thru wireless network but prints fine. Have used this device several times over past 2 years on different wireless networks (at home) but usually at some point I lose wireless scan function but maintain wireless Printing.  I used to be able to reload the software and resolve the issue but now in this "new network" cannot get wireless scanning to work.   Setup software; original software (CD) and current download as well as "Print/Scan Dr"  hangs-up at "network check"  for hours.  Compaq laptop, Dell Laptop, Cell phones and Roku work fine thru network.  Scanner works fine with USB to Laptops.

    Which model Epsons are they?
    I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
    (Your profile says 10.6.7 BTW).
    Maybe the scanning function is not compatible with Yosemite.
    You could try a few things:
    reset your wifi system:
    power down everything: modem, router, computer, printer/scanners.
    wait a minute.
    power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
    try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
    uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
    If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

  • Does the hp deskjet f380 all-in-one can work on a mac os x 10.7.5 ?

    does the hp deskjet F380 all-in-one can work on a mac os x 10.7.5 ? I bought my all-in-one F380 in october 2007 and I would like to use it on my new computer Mac OS X 10.7.5 bougt in december 2011. The DVD from 2007 seems to be unavailable now on my computer. Can you provide me a new way th install the F380 ? Thanks in advance,

     Update:I use mac OS 10.10, but i scrolled down in the driver download menu and selected mac OS 10.6. There I downloadedHP Deskjet PSC and office jet full feature software and drivers v 10.3. This gave me access to full feature software including utility, customer partcipation and scanner software. HP printer software V. 3.1 then automatically downloaded when i clicked apple update in the application store. Interestingly however this is not the version mentioned in the software I use though. Post download, the version of the printer driver mentioned for Deskjet F380 is v2.05 and the version for the utility software is 5.24.2 valid till 2015. Now both my HP Deskjet F380 and  HP PSC 1310 all-in-one PRINT Thanks HP! ISSUES: HOWEVER neither can SCAN! while the F380 shows a scanning error, the PSC 1310 doesn't even pop up as a selectable device to scan with! PLEASE FIX THIS HP! FAST!!     

  • My HP7280 all in one can't find my wireless router

    My HP Photosmart C7280 all in one can't find my wireless router even after I enter my WEP key and ESSID. My other computer is wired into the printer and it works but not wireless. Can anyone help me?

    Is the other computer wired with USB?  if so that is fine.  If it is wired with Ethernet, that is the source of the wireless problem.
    What router?  Oh, and don't use WEP, it is not in the least secure.  I recommend changing your router settings to WPA, create your own password and then try to connect the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT204003 how can i print a boarding pass image file from passbook?

    how can i print a boarding pass image file from passbook?

    I do not believe that Passbook supports printing. You can email, but not print. Then again I'm not sure what it actually emails, if that is a graphic of the card or what. I'm going to try it with my Starbuck's card, but there is no setting for printing within Passbook.
    EDIT: Actually it sends the email as an attachment for a Passbook card file, that cannot be handled by my computer. Hope that answers your question.
    Message was edited by: ChrisJ4203

  • HP 8500 ALL IN ONE - CAN NO LONGER SCAN TO SHARED FOLDER

    I have had an HP 8500 all in one scanner / printer for a while and have not had any problems with,
    Yesterday the printer hung so I reset it.
    I am using ethernet (wired) as opposed to wireless.
    When I reset the printer it gave it a new ip address of which I reconfigured back to the address of my network ie 192.168.7.xxx
    I am able to print and scan from the embedded printer web page but when I scan to my shared folder, the printer cannot conect.
    Does anyone have any ideas?
    I think it may be something either to do with the network path or possibly the sharing permissions fo the network folder.
    Thank you in advance for any assistance that can be provided.

    Hello there @DAVIDA64, welcome to the forums
    I read through your post about the issues you are having with scanning to your network folder. My best suggestion would be to check out the guide below and set up your scan to network folder again.
    HP Officejet Premier 8500 (A909n) and Wireless 8500 (A909g) All-in-One-Printers - Set up and Use Dir...
    Best wishes, have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP all in one: can I connect a non-wireless mouse to the computer

    I have an all-in-one desktop computer (HP pavilion with Windows 8) with wireless keyboard and wireless mouse. What happens if the mouse drops to the floor and breaks? Do I need a new mouse or can I connect a normal mouse with a USB to the computer? Or does the computer work ONLY with a wireless mouse?
    This question was solved.
    View Solution.

    You can connect a USB mouse to your all-in-one PC.
    You won't need to find any drivers since Windows 8 will provide the driver as soon as you plug in the mouse. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Photosmart 3210 All in One - can't scan

    I have uninstalled and reinstalled my Photosmart 3210 All in One printer a few times in the last month and a half.  It hasn't solved not being able to scan.  I have to use Microsoft Paint to do that.  It keeps telling me the Digital Imaging monitor has been deleted or moved.  It also can't find HP Twain Scan.  I need help.  the process listed earlier did not work.  When I right clicked on HP Digital Imaging Monitor and Run as administrator, it said it was no longer in that location.

    Hi  ruthmarq,
    I have done some research and I have located a document that deals with when Scanning Stops at the Preview Screen when the Printer is Connected to the Windows Computer with a US....  This document also has the link to the HP Print and Scan Doctor.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Epson All-in-One can no longer scan.

    I own two different Epson All-in-One printers that worked perfectly fine for Wi-Fi scanning.  Now, they do not appear anywhere as a scanner.  I have ensured all software and drivers are current.

    Which model Epsons are they?
    I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
    (Your profile says 10.6.7 BTW).
    Maybe the scanning function is not compatible with Yosemite.
    You could try a few things:
    reset your wifi system:
    power down everything: modem, router, computer, printer/scanners.
    wait a minute.
    power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
    try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
    uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
    If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

  • C4280 All-In-One can't pull in paper

    When I send a print job to my HP c4280 All-In-One, it makes a bunch of sounds and seems to be trying to pull in the paper, but it doesn't.  It shows an error message saying "Out of paper".
    Is there an easy way to fix this?
    Thanks for any help! 

    I have exact same problem with my HP Photosmart 6280 - the rollers just keep on spinning and not picking up the paper, generating out of paper message.
    However, what I don't understand, this only happens sporadically - even in the middle of a print job.
    It is very frustrating when I cannot finish a print job already started because suddenly the printer cannot pick up the paper any more - even after adding more paper and making sure the stack is loaded correctly, etc.
    And of course, there's no way to access the rollers to see if there is anything blocking it or the sensors.

  • Deskjet F4500 all in one can't comminicate wirelessly.

    I have an HP Deskjet F4500 all in one wireless printer that I have tried to install on my home network. I used the CD that came with it to install and the computer tells me that it has installed properly. However when sending a document to print, although the small window tells me that the document is printing and then that window goes away, a few minutes later another window appears and tells me that the document failed to print. Some times it tells me that the cartridges need alignment so i go through the procedure and nothing happens; at other times it tells me that there is no communication between the computer and the printer, stil some other tomes it tell me that the printer is offline. 
    I know the printer is on line by using my NirSoft Wireless Network watcher which lists the computer and the printer and the other computers on the network.
    I did uninstall printer using Revo Uninstaller rebooted and then installed the printer again. Checked for software updates from HP. Used the HP Installation Failure  guide from HP. Checked the IP address of the printer through the Browser on the computer and it opened the connection with the printer and its properties verifiedthe key on the Security (WPA2) on the router which is a Wireless Broadband Router, verified the MAC address in the MAC filter feature. The printer still does not respond to the printing command same messages back. Computer running Win XP Pro SP3 with all its updates. AMD 64 Processor. 2GB RAM. Any suggestions will be greatly appreciated to solve this problem.
    Sadnewbie

    OK, now insert the printer CD and run the installer, selecting "Network" installation when it asks.  Make sure to NOT have the USB cable installed between your printer and PC when you start the installation.  It will ask you to temporarily install the USB cable during the installation.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT2534 I have three Apple IDs and would like to combine them all into one, can I do that and how?

    When I started buying Apple products I did not realize how important it was to keep the same Apple ID and Password for all of the device.  As a result I have four Apple ID's.  I would like to only have one Apple ID for all my devices.  Is this possible and what do I ave to do to make it happen?  I appreciate any help you might be able to give me.  Thanks

    It's not currently possible to merge accounts, nor to transfer content from account to another account - content will remain tied to the account that originally bought/downloaded it.

  • Win 8.1 and J4680c All-in-One: Can't reinstall the printer/drivers

    I have followed all of the instructions to re-set up my wireless network, uninstall the printer/drivers, and reinstall the printer/drivers (including renaming all of the .dat files as .old), but once it gets to the install wizard, at the Checking System phase, it tells me:
    C:\Users\Patricia\AppData\Local\Temp\7zS41F0\Setup\hpzshlaut...
    System cannot find the file specified.
    What is this? I cannot get past it to finish reinstalling, so I cannot use any of the functionality of the printer other than printing! Can anyone help??
    Thanks!
    This question was solved.
    View Solution.

    Hi,
    Follow the steps below and check if that resolve the issue:
    1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
    Now try reinstalling the HP Software and check if the installation goes as expected.
    If the issue persists continue following the next steps below:
    2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
    3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
    4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
    5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
    6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
    7. Run the installation file and check for any difference.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP PSC 2510 All in One - can't get wireless feature to work with AE

    I just got the Airport Extreme 802.11n access point. But I can't get my old HP printer to connect wirelessly. This is an 802.11b device and should be compatible. I can plug it in to the AE and it works, but can't get the wireless feature to work. Any suggestions?

    Jimmy5, Welcome to the discussion area!
    Personally, I would connect it to one of the LAN port on the AirPort Extreme base station (AEBS).
    If you do succeed in connecting it wirelessly, it will drag down your wireless speeds.

  • HP 6300 all in one can't set up for wireless use

    can't set up for wireless use

    That is because the printer does not support wireless connectivity to a router.  You can with an optional Bluetooth adapter to one computer wireless.  However since this has an Ethernet connection you can connect it to your router via this or you can use the below information to convert your Ethernet wired printer to wireless.
    Connect wireless printer anywhere, convert from wired, bypass failed radio, add WPA2 security.
    http://h30434.www3.hp.com/t5/Printer-Networking-an​d-Wireless/Connect-your-wireless-printer-when-away​...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

Maybe you are looking for

  • Invoice Smartforms NEXT_PAGE Issue

    Hello,         I have a smartform where I  want only the summary information on the front page and then the line items to appear on all the following pages. Does anyone know how to do this?         Initially, I defined a very small height on the Main

  • Database Recovery

    We have a Live 9i database with archive logging. We now want to setup a standby 9i database, so in case anything happens on Live system we will switch on standby. What are the differences between using a physical standby setup or a logical standby se

  • Changing Store Language - Please help

    Hi I am an English speaking and reading person located in Hong Kong. I recently upgrade iTunes to 7 and now I am automatically linked to the Japan Store. Problem is that I can't read anything on the site. This is really frustrating. I can't even logi

  • Every time i open mozilla up a box with a red x pops up saying windows can't open a file and big long message. how do i stop that from happening.

    The error console has this as message. Error: uncaught exception

  • Printer Setup Utility on Startup

    I have a problem with the Printer Setup Utility that is just plain irritating! There is a printer installed and i don't have any problems using it. Whenever i turn-on my machine the Printer Setup Utility always pops up and tells me that "You have no