Pavillion 22 x i has green cast

My monitor started to flash a green tinge on the left hand side. It now has a permanent green tinge on the eft fading to about the center of the screen. Can anyone help?

Hello @zimmerman18,
I understand that your HP Pavillion 22xi monitor has a green tinge to it. The issue you are describing appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Sudden green cast on PS7 under XPsp3

Despite not colour profiling my monitor (I am not a pro user), I have never had any colour hassles with PS7. Until now. Suddenly everything I look at via PS7 has a green cast. First noticed it on my summer holiday pix, went aaaghh!, am now troubleshooting.
It's not the camera. My whole archive has gone greenish, when looked at with PS7. When looked at with with system browers, and with Windows Picture Viewer, everything looks as normal.
I haven't changed any PS settings, but something has changed and not for the better. I can colour correct manually, sort of (dialing up cyan, blue, and magenta!), but this is not viable for all my work.
I have tried some obvious colour settings tweaks, like turning colour mgmt on and off, but nothing stops the green.
I suspect that there is some Windows 'update' (which I do automatically) that has fried my ability to use PS 7, and since PS 7 is no longer being updated there won't be a fix for it, from Adobe.
Does anyone have any advice for making PS7 usable again? I really can't afford to buy CS at the moment.

Hunting around a bit more, looks like it could be my video driver that's gone sour? More ideas welcome...!

Current Lightroom / Camera Raw Camera Profile for Sony ILCE-6000 inaccurate: green cast in shadows! Capture one better! Please fix it!

Hi folks from Adobe!
Please take note that the current Lightroom / Adobe Camera Raw Camera Profile for the Sony ILCE-6000 is very inaccurate: There is a serious green cast in the shadows!
Capture One Express for Sony (which is free by the way) renders a lot more correctly!
Please correct this, since I'd rather buy the coming LR6 because of keeping my established workflow instead of going the Capture One route.
A good example can be found in the dpreview forum "LR5 A6K shadow pulling, a mess! Adobe LR is broken? "
Or search for Philp Reeves 3 weeks with the Sony A6000 review "3 Wochen mit der a6000", where he compares it to the Sony A7, using both times Lightroom to push the shadows.
The Sony A7 is fine where earth looks like brown earth, the A6000 picture looks like grass instead.
Please fix this! This is a high volume camera frequently bought by enthusiast or as second body for FF photographers. That would be really great!

I am talking about the two raw files linked in the very last post of page 6 of the Reeves comparison thread, not JPGs or screenshots of unknown manipulation. In LR they both say f/11 and ISO 100 and have a similar tone, but one is shot at twice the shutter speed as the other. This side-by-side is using Adobe Factory Defaults for each image where the profile is Adobe Standard, the toning sliders are all 0, tone-curve linear, and the Sharpening and Color NR are 25:
However, when I look at the camera-embedded JPGs, side-by-side, the 1/80th image on the left is darker than the 1/40th image on the right, as expected given the reported shutter-speed difference:
And it is indeed the darker image that has more shadow problems, also as expected.
When I do manipulate the darker (a6000) raw file in LR, I do see that the shadows are greenish when brightened unlike most other cameras which usually show magenta, which is the combination of the blue and red sensors showing more noise because there are half-as-many photosites as compared to the green, so I am seeing what people are complaining about and would expect shadow noise to be purple not green, I'm more concerned that these two example raws aren't actually comparable due to apparent differences in exposure. It is also odd that the lens listed in LR is different than the lens listed in the filename, so either someone has mistakenly or deliberately renamed the file wrong or someone or something has changed the EXIF parameters that LR is reporting to be the same when they're really not.

Why do I get a green cast on a burned DVD?

I am in the process of trying to burn a DVD. The colors all look fine in iMovie and iDVD preview but when I burn the DVD many of the colors wash out and there is a green cast to the picture. Any ideas on how to fix this?

Fred:
I believe this is what you were referring to:
Power Mac G4 (Mirrored Drive Door): QuickTime Movie
Has Purple or Green Tint
http://docs.info.apple.com/article.html?artnum=75423
And ( I doubt it) but these may assist him:
http://docs.info.apple.com/article.html?artnum=300879
http://docs.info.apple.com/article.html?artnum=300878
iMac G5 1.8 GHz 20FP &
(2)iMac G4 800MHz 17FP Mac OS X (10.3.9) OS X
10.4.8 / iLife 4,5,6 Superdrives & 1 G RAM / QT6
pro
I appreciate your time in helping me solve this but I still haven't got any clue how to fix the problem. I am using a brand new MacBook 2.0 GHZ system with 1 GB ram installed. I have the latest system updates installed.

C309a printing black and white has magenta cast

I have had a C309a for a couple of weeks now. I have no problems with color printing, but when printing pure grayscale, the prints hae a distinct purple/magenta tint - even when selecting 'print grayscale' from teh 'color' tab of the print setup dialog. The image in question have been totally desaturated in either Lightroom or Photoshop. I have tried HP Premium Plas semi gloss, Premium gloss, and Advanaced gloss papers, all with the same results.
The only way I can get anything near neutral is to print b&w in color and add a slight green cast.
Anyone had this problem

Hi fossil1, are the color ink levels ok? Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Printed photos have strong green cast

Since I upgraded to Lion all photos I print on my HP PhotoSmart 3310 have a very strong green cast, especially in the shadows.
I have tried printing directly from Aperture and also exporting the image then printing from Preview and it makes no difference. I have also reset the printing system by folowing this article http://support.apple.com/kb/HT1341
A test page print from my printer looks fine so I don't think it's anything to do with the hardware itself.
Any ideas why this would be happening and any suggestions for further troubleshooting?

Have you verified it's a problem with the Mac, by printing to your printer from a different machine?
Also, have you updated the drivers recently?:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=uk&dlc=en&sw _lang=&product=439491
Or the Apple update for Lion here:
http://support.apple.com/kb/DL907

Green Cast in Print

I have exported an image from LR (my display is calibrated and profiled) and sent it to a lab. What came back had a green cast on part of the image (with and without optimization enabled).
I have uploaded the exported image and would appreciate if somebody with a calibrated/profiled display could have a look at it:
I can see 3 main colors in the area of the eruption:
a white center
a yellow band outside of the white
orange/red outside of the yellow band
What came back was quite green where I can see the yellow band. I can see no green at all in this image. Can anybody confirm the me, that the band outside of the white is yellow, and maybe what I should do to avoid the wrong prints?
Thanks
Beat Gossweiler
Switzerland

I softproofed your image to the profile of my local Costcos (wholesale chain all through the US) and the yellow center turns greenish upon doing that. My guess is they use similar machines to the Frontiers that costcos uses. The problem is that the yellow center is out of the gamut of such lab printers and that can result in color shifts if they color manage. If the lab you are using supplies profiles, use those to soft proof. You might also have success deleting the profile from your file. This will make their not color manage.

Why videos have a green cast and poor picture

All of the sudden videos on my phone have a green cast to them and look like a digital interfearance. It's happening on all videos. Both ones I have taken and ones on you tube. Anyone else have this problem?

You might have a hardware issue, the display might be damaged/going bad. I would try quitting All Apps and then restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't help, reset your iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
You could try restoring the iPad as well, but I don't know that it would help.

I just bought a new iphone 4S and its has green and purple striiples on the screen when not in use, I took it back to store and they said it was the display protector that is making the striples?

I just bought a new apple iphone 4S and its has green and purple striples on it when not in use, is this norm? I took it back to the Verizonwirless and they said it was from the display protector on the screen?

it was from the display protector on the screen?
Most likely that is the reason. I have a screen protector on and see similar issues when the iPhone is not on. They're not noticeable when turned on. Remove it and see the difference.

My isight camera has green speckles

My isight camera has green speckles/dots in it when i open it with Photo Booth. I have tried a smc reset and pram reset, i was hoping it was just a visual bug, but it actually has the green dots/speckles in the photos I take with the isight camera.

Contacted apple care, booked into Genius Bar at my local apple store
Genius at local store: ran some apple diagnostics called MRI
macbook would not post video in MRI
booked in my macbook pro for replacement screen (clamshell) where the camera also resides
wait 5 days, return to store to collect macbook.
Open macbook instore, boot into osx, open photo booth and green speckles are still there. Apple employee says that its not a screen problem (obviously) and that it could be the GPU and advised me to leave macbook in store for a genius to have another look at it. I told the apple employee that the GPU is not a replaceable part and I was told that it was up to a genius to decide.
required macbook to complete assignment, so will book it back in afterwards

New cable modem, airport has green status, still NO internet connection??

Airport extreme worked amazing with macbook for 8 months! One day my cable modem was no longer working. Had internet provider come and install a new modem.
The new modem now works, and cable provider assured internet worked through a direct ethernet connection to macbook. However when I reset up the airport I can not access internet.
All modem lights are working properly and airport has green light. I am linked to my network.
I have troubleshooted with applecare 3 times with no success. They sent me to the mac store, the store checked both my macbook and airport. Said they are working properly.
Came home and did all the resets of both modem and airport. No success! Applecare says everything matches up, internet provider says everything matches up. But I can still not access internet with airport.
Message was edited by: jmorosoff

Your cable modem needs a complete reset to clear its memory.
Power it down for at least 30 minutes (Some ISPs will take longer for their equipment to reset) and pull the battery in it if it is easily accessible. Power down everything else in your network as well.
Start the modem first and let it run 4-5 minutes alone, then start the router for a few minutes and then start your computers.
If no luck, power down the modem for 2 hours and try the procedure again.
Please post back on your results.

My iphone 5 has green lines on the edges of my screen.What can i do???

My iphone has green lines on th edges,apple replace the display of iphone 5 or i have to change my iphone.my iphone have 11 months

Hi, Theo1997.
Here is a resource that may provide some troubleshooting steps to help with this issue. See the section related to the iPhone display.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If all troubleshooting steps have been processed, I would recommend taking a look at the section labeled Issue not resolved.
Cheers,
Jason H.

My screen has greens and black lines going down the middle an I can't access anything. What could be wrong? It happened all the sudden.

My screen has greens and black lines going down the middle an I can't access anything. What could be wrong? It happened all the sudden.

You're welcome! I feel your pain - both "closest" Apple Stores to me are almost 2 hours away. When I called for another problem under warranty the AppleCare guy checked my zip code and found an AASP (Authorized Apple Service Provider) 20 minutes from me I had no idea existed. They diagnosed the problem (bad bluetooth keyboard) and ordered a new one for me. The AppleCare person will probably use this http://www.apple.com/buy/locator/service/ so you can check it now. And AppleCare could well diagnose your problem over the phone anyway. And I feel certain it wasn't something you did inadvertently.

Error while import XML file from Production to Dev., But has GREEN status

Hi,
I tried to export/import bex queries through XML transportation. Transportation is being done from Production system to Development. In transport connection I selected required query and then I exported to Development. export of file is done successfully.
Now in development system I imported that XML file. It is imported. Giving GREEN symbol and also with GREEN check. But in Log view I found ERRORS. in errors it is mentioned "SAP object 46N3K1OCT22PSBN46O95MQLTJ () cannot be imported". along with long message text "Install the specified objects from Business Content. Only import the metadata afterwards.".
What should I do now as of next step... import of file is stuck..
How can I search object 46N3K1OCT22PSBN46O95MQLTJ (), if I have to install from BC.
I am also unable to find the query in Development Bex analyser.
Thanks for help....
[email protected]

Hi Babloo,
According to the error message, the package may have failed are as follows:
The user account that is used to run the package under SQL Server Agent in PRODUCTION server differs from the original package author.
The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
The package may not run in the following scenarios:
The current user cannot decrypt secrets from the package. This scenario can occur if the current account or the execution account differs from the original package author, and the package's ProtectionLevel property setting does not let the current user
decrypt secrets in the package. In this scenario, we can change the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword, then modify the SQL Server Agent job step command line to include this password.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses. In this scenario, we can create a SQL Server Agent proxy account. This proxy account must use a credential
that lets SQL Server Agent run the job as the account that created the package or as an account that has the required permissions.
References:
SSIS package does not run when called from a SQL Server Agent job step
Run an SSIS Package Under a Different Account
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Green Cast - Photos in Mobile Me gallery & Aperture Library

Hi. I have noticed that some photos on one of my mobile me galleries have turned green, almost like a green filter has been put over them. The same thing has happened to photos in my Aperture library. Any clues to what's causing this? Thanks.

Hi Tim. Thanks for your reply.
Some of the images did actually change after uploading to the gallery, both in the gallery and in the Aperture library project. Here's a link to the gallery so you can see what I mean.
http://gallery.me.com/emma.tarrant#100151
I did manage to fix the problem in the Aperture library by reprocessing the images so it all looks good in the library but not on the mobileme gallery online.
I wondered if anyone else has had this problem before?
I plan to delete the gallery online and start again from sratch!
Thanks again Tim
Best wishes
Emma

Pavillion 22 x i has green cast

Similar Messages

Maybe you are looking for