Pavillion dv9810us DVD/CD-ROM Drive and Vista Device Manager Question..​...HELP!!!​!!

I have a Laptop, just over a year old, runs Vista Home Premium SP2. Here is the scenario
Hadn't used the DVD/CD-ROM drive for 3 or 4 weeks at which time it worked fine. Tried to use it a couple of days ago and discovered it wouldn't respond. I figured I needed to maybe rollback the Driver or something. I checked in the Device Manager and saw the main HDD was listed but there was no DVD/CD-ROM drive in the Device Manager List. Does Vista remove the DVD/CD-ROM drive if it's inoperable (DEAD) or has something happened that removed the Device from the List. I've had Drives go South before in Windows 98 and 2000 but they were never removed from the Device Manager List they just didn't work but I know Vista is a OS of a different color so I don't know. Just trying to figure out if I'm fighting a Hardware or Software fight here, I'm at a loss and can't afford to just take it into a shop for diagnosis. Any answers or tip on how to definitly isolate the problem would be greatly appreciated, thanks in advance for any Help.
Len

I have the same problem, dvdrw not showing in device manager.  Bought a new TS-L632N dvdrw by TSST and it still does not show in device manager.  This started after I ordered new recovery disk from HO (vista Home Preminum) and reloaded the OS.  I know HP knows about this problem but will not do anything about it.  Online support not good and a 500 dollar repair bill would be a waste when you can buy a new laptopn for that.

Similar Messages

  • Cannot install DVD/CD ROM drive after upgrading from Windows 7

    I had a working DVD/CD-ROM drive before upgrading. Now it shows as Unknown Device in Device Manager, I tried uninstalling it and then scanned for hardware changes but it still does not work. I also tried manually selecting a CD-ROM drive for it but it
    ends up with an error code 31. I also checked for {4d36e965-e325-11ce-bfc1-08002be10318} registry but it did not have lowerfilters key. How do I install the driver for it?

    Hi,
    The error code 31 means that Windows cannot load the drivers required for this device.
    Considering that this issue mostly can be caused by compatible issue.
    Please check if you can fine the latest driver from Manufacturer’s website. If so, try to install it under Windows 10 compatibility mode: Right click the installer of the driver, choose Properties, choose Windows 7 under Compatibility
    mode to install.
    If the CD device still fails to work, I recommend to check the setupapi.dev.log under %windir%\inf, locate the device and find the line below:
    dvi:             Rank         - 0x00000000
    Then, corresponds the score in this link:
    Identifier Score
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff546297(v=vs.85).aspx
    The value 0x00003000 is the best identifier score and the value 0x00003FFF is the worst identifier score.
    The score near 0x00003FFF means that the driver and device may not compatible with current system, we may need to wait for the menufacturer’s driver update.
    Thanks for your understanding.
    Kate Li
    TechNet Community Support

  • Dvd/cd rom drive deleted

    Somehow my Dvd/cd rom drive was deleted. I have a compaq presario f700 notebook computer. I looked in drives and the bios and it is no longer listed. I went to HP website and can not find any wheres to redown load it. Does any one know how to get it back?
    I am also having a problem with when I turn on my computer the screen is black it is booting up but I can not see anything. I shut it down and sometimes ttakes a few tries then it i can see the password screen. I did do a windows check and it said my nividia geforce needed updated, but again when I went to hp website and scanned it said it was up to date. So not sure what is going on........any ideas?
    [Personal Information Removed]

    With the iPod connected and allow use as disk drive checked, right click on the ipod icon on your desktop then change the drive letter of the iPod, say to P. Eject the iPod and disconnect it, reboot your computer and see if the drive is back.

  • Satellite A660 DVD/CD-ROM drive does not detect discs

    Hi there,
    I have a Toshiba Satellite A660 with a MAT****A BD-CMB UJ141ES DVD/CD-ROM drive. It is about 18 months old and recently I have noticed that it does not recognise any CDs/DVDs. It makes a couple of noises once inserted but then stops spinning and nothing happens or changes in My Computer view.
    Please note there seems to be no apparent problems with the drive:
    - It is present in My Computer
    - The device is working properly in device manager
    Things I have already tried:
    - Run Microsoft FixIt and CD-ROM/DVD Troubleshooter - both said it could not recognise media
    - Deleted upper filter in the registry as per many suggestions (no lower filter present)
    - Updated driver
    I don't know what else to do. Please help as this is frustrating for a relatively new notebook which never is moved from my desk (don't expect many damaged parts).
    Cheers

    As I said: clean the laser lens
    If you open the CD/DVD drive you will see the small laser lens.
    Use cotton wool tip and alcohol
    > Or at least provide a link?
    Dont know any

  • Satellite P105 - DVD/CD ROM drive does not work

    The DVD/CD ROM drive on my P105 does not work at all.  I've tried the registry fix for the upper/lower limit thing - didn't fix the problem.  The drive does have power, does spin a disk, but it is not recognized by the system.  It doesn't show up in the device manager at all.  I need to get this working and I'm hoping it doesn't need a new drive as this machine is out of warranty (of course!).  Thanks for any and all suggestions on hot to fix this problem.

    Howdy folks. This thread has a lot more views than the one I posted to, but go here to the following message for a possible solution to your CD/DVD Drive issue:
    http://laptopforums.toshiba.com/tshb/board/message​?board.id=brd_gen&message.id=3357&query.id=176774#​... 
    Cheers!
    D.Lex

  • H520s Windows 8 DVD-ROM disabled and error 19 - registry corrupt Help please!

    Hi all and hoping for help with H520s, 64bit  OS Windows 8. Error message showing  problem with DVD-RAM Mat**bleep**a SW820; this is disabled in the device manager, and I can't use the DVD drive as a result. (yellow triangle)
    Have tried windows fix utility on pc ; drivers are up to date. Have disabled, enabled etc. But it's still error 19
    This was working perfectly until a couple of days ago when Microsoft ran a mega load of updates, including critical windows 8 updates. Am wondering if there's some conflict?
    Have searched the Lenovo solution centre for up to date drivers for the dvd-RW but there aren't any. Don't really want to uninstall the DVD-ROM drive and attempt reinstall unless can definitely reinstall and can't find anything that reassures me I wil be able to do so.
    Wondering if Is this similar to another issue on Toshiba pcs where it seems, according to various searches,  it was a corrupted registry entry due to conflicts with pre installed pc rescue type utilities?
    I'm no IT expert and the idea of registry fiddling is not reassuring.

    hi teapot,
    Welcome to Lenovo Community Forums!
    You can try Micorsoft's automated ix it tool about the same issue.
    Check this Link
    http://support.microsoft.com/kb/314060
    try that and it should work,
    Hope this helps,
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

    Driver files needed for the following Sony dvd/cd rom drive:  "dvd-rom  ddu 1615". 
    The dvd-rom drive will not read any type of dvd or cd.
    desktop computer:  Dell Dimension E310 , windows xp, service pack 3.
    This Sony dvd rom was installed (by someone else) and replaced the dvd rom that initially came with the Dell E310.  
    Where can I find driver files for this dvd rom?
    Thanks,
    Denise

    Hello Denise,
    Welcome to the Sony Community.
    All of the Sony internal optical drives are plug & play with Windows so no drivers are required for detection in your PC. If you are having issues getting your drive detected then please try the following:
    • Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.
    • Ensure you have the latest Service pack for your Windows operating system and any other updates for your system installed.
    service, storage support email
    • Please remove your secondary IDE channel from the Device Manager.
    If the issue is still not resolved, service may be required. You may contact the Sony Storage support team by e-mail at: [email protected] for further information.
    Thank you for your post.

  • Computer can't find DVD/CD-ROM drives after installing iTunes

    After installing iTunes, my computer no longer can detect my DVD-ROM and CD-RW drives. They've disappeared from the "My Computer" window.
    I ran "System Restore" and the disc drives showed up, but now they're undetected once again after I re-installed iTunes. I've restarted, I've uninstalled and then reinstalled iTunes, I've run the built-in diagnostic self-checks on the drives, I downloaded updated drivers, I uninstalled and reinstalled drivers, spent 1 hour on the phone with Apple support, and finally spent 2 hours on the phone with Dell Support. Nothing. Please help--I want to be able to use my iPod with Windows.
    Dell Dimension E510   Windows XP   Windos XP Media Center Edition 2005
    Dell Dimension E510   Windows XP  
    Dell Dimension E510   Windows XP  

    Hey there. May I interject? Anyone mind?
    For the most part, what's occurring is one of two things. Either...
    A) an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some folks, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists.
    or
    B) a virus (or trojan) burrows its way into your file structure, and creates an element of itself disguised as a .SYS file. We've seen this happen before with viral elements disguising themselves as audio or video card driver files, in the efforts of masking themselves from lower-class anti-virus programs (or un-updated ones). In this case, they take on the name of a driver file that the optical drives are "familiar" with, and so, with the intention of being "fast, friendly, and efficient", the optical drives are tapped to utilize this new "driver" file... and it gets referenced in the registry as such.
    However, when your anti-virus actually snaps to it, and removes the virus / trojan, and you go off on a virus-killing mission, galavanting through the registry and cleaning the little buggers out in Safe Mode and everything... you might remove the viral elements... but... the reference to them might still remain. The device manager is still looking for that "driver file", and will cause the optical drives to lock up in a Code 39 or Code 41 because of it.
    Either way, the thing to do to reclaim your optical drives is located in your registry here:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
    You'll want to have that open, and a mini-window of the following:
    START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
    Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
    At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
    Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
    This should start a new Found New Hardware cycle, and.... poof!... your drives should be back to normal
    I don't know if this will help, I think it should.
    Good Luck. Post back if you have a problem.
    Rachyl

  • Dvd/ cd-rom driver disabled !!!

    I have gone thru all of apple's recommendations multiple times, and I still cant get this problem to go away. Please help!!!

    There should be a category that says "DVD/CD-ROM drives" in Device Manager.
    Are you sure both the sata and power cables are connected to the disc drive inside the pc case?
    Try the link below.
    Unuinstall driver (skip this part if u dont have it), remove filters, then restart pc.
     http://www.pchell.com/hardware/cd_drive_error_code​_39.shtml
    You can also check in the BIOS (F10) at pc startup and unde the Main menu it lists your disc drive and hard drive. 

  • DVD\CD ROM driver problems

    Windows 7 64-bit. I got a HP DVD A DH16AAL SCSI CdRom, and is saying a driver (service) for this device has been disabled. An alternate driver may be providing this functionality (code 32), how do i fix this

    Hi,
    With the optical drive connected, open windows Conyrol Panel, open Device Manager, open DVD/CD - ROM drives, right click on the DH16AAL and select Uninstall.  When this process has completed, restart the PC and let Windows re-discover the Hardware and hopefully reload the driver.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Please help dvd/cd-rom drive won't work

    When I start computer the dvd/cd-rom drive is seen and works under  my computer (listed under other) but after an couple of minutes the drive has an red x and is listed as cd drive. There are times when it doesn't show up period. When I go under device manager I see and yellow exclamation mark. I cannot roll back (icon doesnt allow) and when I try to update it says that this version is the most update version. I have never personally tried to update this driver since I bought the computer it seems as if overnight there is a problem.
    When I go to device manager and go to properties the message that appears is:  Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)
    I have a lenovo G575
    AMD E-350 processor 1.60 GHz,
    RAM 3.00 g.b.,
    Windows 7 64bit operating system.
    I have tried to use the troubleshooting tool but it doesn't work.
    Could someone give me step by step instructions on how to fix my computer.
    Thankyou in advance.

    When you go to device manager for the device right click the drive and click Uninstall,AFTER and only after you do that download the correct driver from Lenovo's website and then install it.  It is generally best to totally uninstall old drivers before attempting updating to a new/different one as it can create issues like this.  Let me know if this worked for you.
    Lenovo 15.6,B575 W7 E-450,ATI6320,320GB,8GB DDR3 Ram-*Midnight*
    Dell Latitude D430,12.1 C2D 1.3 ULV,2GB DDR2,80gb SSD,Intel 950,XP *Mini Me*
    Dell Latitude D630,14.1,C2D2.0,W7,500GB,8GB DDR2,X3100*Old Faithful*
    Nvidia I shall Never forgive you for the 8000m Series.

  • Problems with my DVD/CD-ROM Drive (MS-8216)

    I have a BIGGGG problem with my DVD/CD-ROM Drive (MS-8216)
    I was copying somethin in my comp, and the cd got BOOOM into pieces inside.
    My warranty expired 1 month ago, so i clean it in the inside. After this it is like this :
       - i can watch 700mb movies AVI format with no problems, but when i want to copy anything in my comp from the cd it always stops rotating at 6% of copiyng and BANG it stops and an error has acourde. Same with the dvd's. Please don't ask me about my comp config couse i know it has no problem with that. I left every thing like it was inside ---  impecable, no wiress unplugged and i've upgraded the firmware also
    What can it be. Thank you

    if you can read the CD, but not copy from it, try this program:
    Isobuster
    It allows you to read with a much better accuracy than the generic windows driver.
    However, i'm afraid your drive has been damaged in the explosion and this is only a work around, not a real solution.
    The good point is that DVD burner are now cheap, but it is not much...  

  • I have a windows 7 dvd in the drive and the mac is set to launch from the dvd drive. How do I change the startup disk?

    I have a windows 7 dvd in the drive and the mac is set to launch from the dvd drive. How do I change the startup disk?

    Hold the option key at startup and when you get to the boot panel select your Mac OS drive.

  • My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

    My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
    I tried to reinstall driver.
    I downloaded new codec
    I tried Microsoft FIX IT
     Nothing worked.
    Need some help.
    Thank you!!
    Paul

    Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
    Hope this helps you.
    Robert

  • Palm pro wont sync with outlook 2003 and windows device manager?

    Palm pro wont sync with outlook 2003 and windows device manager?  Files  e.g. word docs or excel files sync o.k. but i need my contacts and i only get a error that there is sporblem with my desktop computer.
    I am using vista  and i have all updates installed.
    Post relates to: Treo Pro T850U (Unlocked)

    Do you have windows mobile device center installed(WMDC)? If not download it from here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
    Be sure you download the correct version for your PC. If you have 32bit OS or 64bit OS. To find this out, right click on Computer under start and select properties. Near the middle it should say 32bit or 64bit. If you know you have the correct software. Open up the control panel and go to sync settings. Right click on the partnership you have setup and select delete. On your device go to Start-->Programs-->Activesync-->Menu-->Options tap on Windows PC and select Delete. Then once both are done resetup your partnership. But this time uncheck everything. Then once it is done syncing. Go to Mobile device settings and change content sync settings and select Contact. Click save and let it sync. Do the same for calendar, tasks, and notes but leave the last item checked. So when Contacts are done syncing you go and check Calendar and leave Contacts

Maybe you are looking for

  • Default all sales order to create PO directly

    Hi all, Is there a way to default the Purchase Orders checkbox on the Sales Order screen to be checked every time? We create the purchase order directly from the sales order 99% of the time. THanks, Jane

  • How to create a variant of an existing master page

    After struggling with this for an afternoon, I hit on a fairly simple way to duplicate and modified master page file, since RH8 doesn't seem to have a method for copying them, and editing certain sections is difficult. In the Windows Explorer view (i

  • HT201270 Problem with iPad carrier settings update

    I have done this update and now I get a repeat message to do it again every time I sync my iPad. How can I stop this happening?

  • Images - too big

    Hi, I am trying to create something like an album for photographs in java. Each picture is about 1 MB JPEG. When I try to load them as thumbnails (using ImageIcon), I get OutOfMemoryException. As I understand, ImageIcon uses Image, which is represent

  • Unable to insert Drilldown charecteristics in report designer

    Hi All, When i am inserting report in report designer the drilldown charecteristics are not including into that, and at the same time it is showing msg like ' universal heirachies cannot inculde in to report designer' Can any one help me in this rega