Pavillion N-15 030us stuck in safe mode with no display

The display is broken and I was using a monitor connected thru the HDMI cable. I restarted the notebook in safe mode which I take it does not enable the HDMI port? So now I am stuck in safe mode with no display.

Hello @LogicMantra,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop is not able to display after booting in safe mode, and I would be happy to assist you in this matter!
To correct this issue, I recommend borrowing an HDMI compatible monitor and updating the drivers for your system this way. If this does not work, please follow this document on Computer Starts but Monitor Remains Blank (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Windows Stuck in Safe Mode - mouse won't work - need my data...

    New Mac User, well two months of trying to get it to opperate correctly. Unbelievable! I've re-installed XP SP2 too many times to count, finally had it up and thought it was running fine for the last week, then I went over to the Mac OS tried accessing windows through boot camp, it shut down the Mac OS, then when I tried to go back to boot windows directly, I received the damning <windows root> \system32\hal.dll file is missing or corrupt - again.
    I've gone through a bunch of posts, tried a number of the instructions, and now have a worse issue, my computer is now stuck in safe mode with Windows, by instructions, here, I'd disabled everything for start up in Configuration Utility and checked start up in safe mode there too, so now I can't get it out of it, and since my mouse and keyboard won't opperate in safe mode, I get to the log in page to select user but the mouse just won't move and pressing "CTRL ALTDLT" no response.
    In the Recovery Counsole when I rean CHKDSK /r this is what it came back with...
    "The volume appears to contain or or more unrecoverable problems."
    97638572 kilobytes total disk space.
    90877508 kilobytes are available.
    406 bytes in each allocation unit.
    24409643 total allocation units on disk.
    22719377 allocation units available on disk.
    So what does that mean? Not sure what the " volume appears to contain one or more unrecoverable problems" means when it's not telling me what they could possibly be. Thoughts anyone?
    If anyone knows or has some good advice on how to get windows back up and running correctly, and without wiping out my data - as I can't get it backed up, I would be tremendously grateful...
    2 months of this is really enough, dying to use my system, and praying that I can...
    Thanks so much,
    Kitti
    Message was edited by: Kittikatt
    Message was edited by: Kittikatt

    Here's what worked: http://support.microsoft.com/kb/330184
    I followed the instructions above and once I finished, After re-booting, I selected Microsoft Windows XP Professional and the System Configuration Utility came up.
    On the “General” tab, it shows that the Start Up Selection is on “Selective Startup” with everything checked, but what’s marked “Using Modified BOOT.INI
    Tried to change it to “Normal Startup – load all device drivers and services” then re-start.
    Windows came back up, but so did the System Configuration Utility and still showing that it was starting up with “Selective Startup”
    Now just need to figure out how to start it up in “Normal”, if in fact that’s possible. Will keep you posted and if anyone has any further suggestions, that would be much appreciated.
    I do hope this will help all the others that have run into the main issue, which I have found is caused by the Parallels Desktop by they way, not Microsoft, and that start having issues by getting the dreaded " hal.dll " file is missing or corrupt on a direct Boot to Windows.
    Very long and sleepless night….
    Kitti

  • I have iphone 5c in blue says error code (1) and stuck in safe mode please help? No water damage

    My iphone 5c stuck in safe mode with error code (1) cannot restore? Anyone help please ?!?

    go on the internet and type in find my iphone 5c but then once you have done that type in your apple ID then take it out of recovery mode hopefully that should work

  • Hp Pavillion windows 8 stuck in safe mode- no display

    My girlfriends pavillion notebook has the win 8.1 upgrade on it.  It came with win 8.  The display is broken and she has been using a monitor connected via the HDMI port.  She was having performance issues, freeze up, delayed response type stuff.  Bad enough I decided to restart in safe mode to work on it.  I did so without thinking about the HDMI port not being enabled in safe mode. It was actually a Safe mode/minimal restart. So now I can not get it out of safe mode because I have no display without the HDMI port.  Any suggestions would be appreciated.  I have tried a hard boot, where you take out the battery, disconnect everything and hold down the power button.  Though highly recommended several times she did not make a start up disc or recovery disc.

    Hi
    Please refrain from using caps! looks like you are shouting.
    You say that your machine is stuck in safe mode. when you boot does it go straight there?
    Good read on accessing the advanced options and repairing your machine.
    http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • MacBook Pro- Stuck in safe mode!?

    Hi, I am a first-time MacBook user and need a little help...
    I am running lion software and recently performed a software update (pop-up screen general update). Since doing this, my Mac is now:
    - Only allowing me to type in Shift Mode i.e. I cannot type '1' but it types '!', '3' becomes '£', etc etc
    - Stuck in safe mode
    - Will not recognise any USB's (however i suspect this is because it's stuck in safe mode!)
    Any help would be much appreciated??? I cannot use it any more, and it makes me just want to get rid of it! :-(
    Thanks in advance....... :-)

    Try resetting the SMC - http://support.apple.com/kb/HT3964 - see the drop-down menu on "Resetting the SMC on portables with a battery you should not remove on your own."
    Good luck,
    Clinton

  • Stuck in safe mode on windows 8.1. and it is not recognizing my password, so i cant get into anywhere to sort it.

     NORTON WERE DOING A REMOTE ASSIST, WHEN THEY HAD TO RESTART MY LAPTOP, BUT WHEN ASKED FOR MY USER NAME PASSWORD IT WAS SAYING EITHER YOUR U/NAME, OR P/WORD IS INCORRECT. SO NORTON COULDN'T HELP. SO I CONTACTED MICROSOFT TO GET A NEW PASSWORD WHICH
    WAS EASIER THAN I THOUGHT. BUT WHEN I TRIED ENTERING IT, I WAS STILL GETTING THE SAME WRONG U,N OR P,WORD? "HELP" PLEASE....MY HEAD IS DONE IN AS NORTON WANT NOTHING TO DO WITH IT AND MICROSOFT ARE WANTING CLOSE TO £100 FOR DOING A REMOTE ASSIST.
     SOMEONE PLEASE "HELP"ME OUT OF HERE!!!

    Hi
    Please refrain from using caps! looks like you are shouting.
    You say that your machine is stuck in safe mode. when you boot does it go straight there?
    Good read on accessing the advanced options and repairing your machine.
    http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • How can i get my bookmarks back, after mozilla crashed and got stuck in safe mode?

    I was using mozilla as usual when suddenly it crashed and then my computer turned off. i restarted it and said it had gone into safe mode. i tried to restart the computer again but it was stuck on safe mode.
    The bad part is that all my bookmarks are gone and apparently there is no way of getting them back.
    please help!

    See:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Did you check your hard drive with the chkdsk.exe utility?

  • Stucked at Safe mode (windows 8.1)

    It's been 5 months that my Hp laptop stucked at safe mode.
    5 Months ago i tried to delete Eset Smart security from my laptop, the program said that the best way to do it is by Safe mode, so i reboot my laptop and then it asked for a password, so i enterd my normal password for every account i have, and it said it's
    incorrect.
    I tried tutorials of hacking into the laptop, tutorials of passwords recovers, not working.
    Because it's a safe mode, no network.
    I need a solution that will leave my data in my laptop, i have pictures, works, programs, important stuff.
    Please help.

    Hi,
    Which account did you choose when you logon Safe Mode? To uninstall Eset Smart, you can also uninstall it at normal mode.
    How about using system build in Administrator account to logon Safe mode? Have you tried yet?
    Roger Lu
    TechNet Community Support

  • Stuck in Safe Mode

    It appears that I am stuck in safe mode. Currently i have tried to-reboot with tapping the F8 key and choose... Start in normal mode/didnt work...did it again and chose the-resore to last known good configuration/didnt work.-windows and R/didn't work-2 different restore points/didn't workAny other suggestions?

    JW
    Can we assume you went into msconfig and unchecked it?
    win key +"X">run>msconfig
    Wanikiya and Dyami--Team Zigzag

  • Xperia z1 is stuck on safe mode please help

    Xperia z1 is stuck on safe mode please help, I have done over 10 normal restarts and still stuck

    This might be helpful
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
    Don't forget to give Kudos
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Help! I deleted all software from MyRIO and it's stuck in safe mode

    Hi,
    In the NI MAX interface I saw that there were a new software version to intall, in the section where is possible to add and remove software items to MyRIO from a list with checkboxes. The last option in that list was something like clear everything, remove all software, or other similar text. 
    I did this, planning to install the new software version after that. Then the MyRIO restarted in safe mode, whith the status led blinking three or four times  each 5 seconds. And it never was recognized again by the computer.
    I tried the reset button without success. The MyRIO is always stuck in safe mode.
    Then I tried communicate using the serial port of my computer configured according with the MyRIO User Guide, connecting the RX, TX and GND of the computer connector in the UART ports of the MXP A connector. But the NI MAX don't see the MyRIO, there is no answer in the serial communication. 
    How can I install the software again in MyRIO?
    Thanks in advanced.
    Regards,
    Rodrigo.
    Solved!
    Go to Solution.

    Hi,
    Today I managed to communicate with MyRIO and now its working again.
    The interface RS232<->UART using the IC MAX232 worked, but I could not install the software in MyRIO through this interface.
    Probably I uninstalled the NI software related with MyRIO from my Host computer, because when I connected the MyRIO using the USB interface to my other computer it was recognized and I installed the software in it without problems.
    Regards,
    Rodrigo.

  • Tb not responding, even in safe mode with networking enabled?

    duplicate of [/questions/1054504]
    Hi,
    I've read many of the questions relating to TB not responding and it appears that it is related to anti virus, however I've restarted windows 7 in safe mode with networking, however TB still not responding. I've also ran TB in safe mode while still in windows safe mode and still not responding. I've uninstalled & re-installed TB all to no avail. I've uninstalled a program I recently installed although it was unrelated but still no change.

    ''Matt [[#answer-710384|said]]''
    <blockquote>
    Is your computer a little on the "slow side of things" historically the global search was something of an issue back when it was first introduced. It can sometime be an issue while the initial synchronization of large mail stores occurs. But this is almost always on lower powered machines
    Does your machine specification come close the these minimums ?
    Pentium 4 or newer processor that supports SSE2
    1GB RAM
    200 MB hard drive space
    </blockquote>
    The PC is an HP Pavillion
    AMD Phenom II X4 955
    8GB Ram
    1TB HDD

  • Firefox plug in container has stopped working, even in safe mode with plug ins disabled

    My firefox keeps crashing every 5 - 10 minutes. Sometimes I get a windows error message saying "firefox plugin container stopped working", but most times I don't. These are the actions I've taken so far, with no effect:
    1. Updated all my plug-ins
    2. Run firefox in safe mode with plug-ins disabled
    3. Uninstalled and reinstalled firefox
    4. Run an AVG scan which turned up nothing
    Can anyone offer advice on how to fix this (very annoying) problem?
    I've had to write this in IE because firefox wouldn't stay open long enough for me to copy and paste it into the text box.

    Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

  • Firefox 29 When I right click to open in a new tab, the tab will open but it will be a blank page. Tried Firefox Safe Mode & with Ad On Disabled Nothing

    When I right click to open in new tab, the new tab will open but the page is blank. I have tried it in Firefox Safe Mode & with Add Ons Disabled, still doesn't work.

    Hi UKBlue,
    Is your new tab page set to about:blank? You can change this from the about:config page or you can restore defaults by resetting Firefox.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

    My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

    What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

Maybe you are looking for