Pavillion p6754y locks up and factory repair fails with error code
My Pavillion p6754y started locking up. After attempts to clean had drive I ran factroy repair. Recovery Manager failed with an error code of 0xe0ef000e. How do I find what this error code means and/or is there any indication of how system can be repaired.
Hello JohnG2.
You need to test your hard drive. Are you still able to boot into Windows? If so, follow these steps.
Have a lovely day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.
Similar Messages
-
Calendaring agent failed with error code 0x8000ffff Event id 8206 and 8207
Hi to all
We have an Exchange 2007 SP3 with Update Rollup 11 and all the user use Outlook 2003 with SP3.
Suddenly in our Exchange Server we have start to receive a lot of 8206 and 8207 EXCDO errors in the Application.
Event Type: Error
Event Source: EXCDO
Event Category: General
Event ID: 8206
Date: 5/2/2015
Time: 11:17:41 πμ
User: N/A
Computer: EXCHANGESRV1
Description:
Calendaring agent failed with error code 0x8000ffff while saving appointment.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 48 72 53 61 76 69 6e 67 HrSaving
0008: 41 70 70 74 3a 3a 48 72 Appt::Hr
0010: 43 68 65 63 6b 50 61 74 CheckPat
0018: 74 65 72 6e 20 66 61 69 tern fai
0020: 6c 65 64 2e 20 4d 61 69 led. Mai
0028: 6c 62 6f 78 3a 56 61 73 lbox:x
0030: 73 69 6c 69 73 2e 4b 6f xxxx.xxx
0038: 6e 74 6f 67 69 61 6e 6e xxxxxxx
0040: 69 73 40 45 55 52 4f 43 xx@xxxx
0048: 48 41 52 54 49 4b 49 2e xxxxxxx.
0050: 47 52 GR
Event Type: Error
Event Source: EXCDO
Event Category: General
Event ID: 8207
Date: 5/2/2015
Time: 11:19:41 πμ
User: N/A
Computer: EXCHANGESRV1
Description:
Calendaring agent failed with error code 0x8000ffff while deleting appointment.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 48 72 44 65 6c 65 74 69 HrDeleti
0008: 6e 67 41 70 70 74 3a 3a ngAppt::
0010: 5f 48 72 47 65 74 42 75 _HrGetBu
0018: 73 79 49 6e 66 6f 20 66 syInfo f
0020: 61 69 6c 65 64 2e 20 4d ailed. M
0028: 61 69 6c 62 6f 78 3a 56 ailbox:x
0030: 61 73 73 69 6c 69 73 2e xxxx.xxx
0038: 4b 6f 6e 74 6f 67 69 61 xxxxxxxxx
0040: 6e 6e 69 73 40 45 55 52 xxx@xxx
0048: 4f 43 48 41 52 54 49 4b xxxxxxxx
0050: 49 2e 47 52 I.GR
All the errors come ONLY FROM 1 USER.
How can i fix this errors?
If you require any further information do not
hesitate to let me know
Thanks and regards.You must ask in Exchange forum
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver -
SSPI handshake failed with error code 0x8009030c and Login failed for user''
I got the following error when tried to connect to local machine in the
non-domain environment with Windows Authentication by SSMS.
"SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security."
"Login failed for user''. the user is nothing associated with a trusted SQL server connection."
questions
1,if I saw the "SSPI handshake failed ", does it means it must used Kerberos but failed? or it is also possible used the NTLM but failed?
2,Any ideas for this issue?
Please click the Mark as Answer button if a post solves your problem!Hi Michael,
Firstly, "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos authentication. For more details about "SSPI Handshake Failed" error, please review this
FAQ.
Secondly, regarding to your error message, it could be caused by loopback check. To resolve the issue, please set the DisableLoopbackCheck registry entry to 1 by performing the following steps.
1.Click Start, click Run, type regedit, and then click OK.
2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3.Right-click Lsa, point to New, and then click DWORD Value.
4.Type DisableLoopbackCheck, and then press ENTER.
5.Right-click DisableLoopbackCheck, and then click Modify.
6.In the Value data box, type 1, and then click OK.
7.Exit Registry Editor.
8.Restart the computer.
There is a similar blog about your scenario for your reference.
http://www.bhcblog.com/2009/10/08/fix-for-login-failed-for-user-the-user-is-not-associated-with-a-trusted-sql-server-connection/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
I am trying to install CS6 Design and Web Premium trial and it fails with error code 20
I am trying to install CS6 Design and Web Premium trial and it fails with error code 20
Re-extract or copy the contents of the installer. Let us know if this helps.
See http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html -
PSE12 download keeps failing with error codes DF006 and DF016. [was:Question]
I have purchased elements 12 for my Macbook pro but the download keeps failing with error codes DF006 and DF016.
What can I do?Is there an Exit Code indication that precedes the DF indications? If so, try searching this forum using that "Exit Code #" substituting the number for #
-
I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas???? -
OPatch failed with error code 73
Friends,
We are getting below error message while firing $ORACLE_HOME/OPatch/opatch lsinventory.Please suggest me whether what could be the reason for this.Appricate your help.
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Locker::release()
OUISessionManager::unRegister()
Un-Registering the caller : OPatch
LsInventory::getInstance() returns
LsInventorySession failed: Unable to create patchObject
Cleaning up the directory : "/oracle/rdbms/10.2.0.4/.patch_storage/patch_unzip"...
OPatch failed with error code 73
Regards,
VinayFollowing these instructions solved the problem for me, maybe they will help you.
Issue 3: On Linux AMD x86-64 on RHEL4 systems, if you run OPatch in -report mode, it detects the incorrect platform and then terminates with errors similar to the following:
Apply Session failed: ApplySession failed to prepare the system.
OPatch failed with error code 73
Workaround: Set the OPATCH_PLATFORM_ID environment variable to point to the AMD64 Linux platform, whose ID is 226. For example:
export OPATCH_PLATFORM_ID=226
Then re-run OPatch in -report mode, for example:
opatch apply -report
Or
opatch rollback -report -
OPatch failed with error code 72
Hi,
i am trying to apply database patches, when ever i am trying to use opatch i am getting below error.
[oragold@apps OPatch]$ opatch lsinventory
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u02/oracle/PROD/db/tech_st/10.2.0
Central Inventory : /home/oragold/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.2.0
OUI version : 10.2.0.2.0
OUI location : /u02/oracle/PROD/db/tech_st/10.2.0/oui
Log file location : /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch-2009_Mar_30_16-28-49-EST_Mon.log
List of Homes on this system:
Home name= OraDb10g_home1, Location= "/u02/oracle/PROD/db/tech_st/10.2.0/db/inventory/prereqs"
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
Oracle Home dir. path does not exist in Central Inventory
Oracle Home is a symbolic link
Oracle Home inventory is corrupted
LsInventory Session failed: OracleHomeInventory::load() gets null oracleHomeInfo
OPatch failed with error code 72Sawwan,
i followed the metalink note which you given above, but i am getting same error
-r-xr-xr-x 1 oragold dba 27068515 Mar 30 17:57 p6880880_102000_LINUX_OPatchsoftware. zip
[oragold@apps 10.2.0]$ cd OPatch
[oragold@apps OPatch]$ ls
docs jlib opatch opatch.ini opatchprereqs
emdpatch.pl ocm opatch.bat opatch.pl README.txt
[oragold@apps OPatch]$ opatch lsinventory
_osArch is i386
/u02/oracle/PROD/db/tech_st/10.2.0/jdk/bin/java -cp ./ocm/lib/emocmutl.jar:/u02/oracle /PROD/db/tech_st/10.2.0/oui/jlib/OraInstaller.jar:/u02/oracle/PROD/db/tech_st/10.2.0/o ui/jlib/xmlparserv2.jar:/u02/oracle/PROD/db/tech_st/10.2.0/oui/jlib/share.jar:/u02/ora cle/PROD/db/tech_st/10.2.0/oui/jlib/srvm.jar:./jlib/opatch.jar:./jlib/opatchutil.jar:. /jlib/opatchprereq.jar:./jlib/opatchactions.jar -DOPatch.ORACLE_HOME=/u02/oracle/PROD/ db/tech_st/10.2.0 -DOPatch.DEBUG=true -DOPatch.RUNNING_DIR=. oracle/opatch/OPatch ls inventory
Invoking OPatch 10.2.0.4.6
Oracle Interim Patch Installer version 10.2.0.4.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
CmdLineParser::initRuntimeOptions()
Checking on class oracle.opatch.opatchutil.CmdLineOptions$StringArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Strin gArguments
There are 7 fields defined in this class.
adding option "fp"
adding option "dp"
adding option "fr"
adding option "dr"
adding option "mp"
adding option "phbasedir"
adding option "phbasefile"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$BooleanArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Boole anArguments
There are 2 fields defined in this class.
adding option "delay_link"
adding option "cmd_end"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$IntegerArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Integ erArguments
There are 2 fields defined in this class.
adding option "integerarg1"
adding option "integerarg2"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$StringtegerArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Strin gtegerArguments
There are 5 fields defined in this class.
adding option "stringtegerarg1"
adding option "stringtegerarg2"
adding option "ps"
adding option "mp"
adding option "xmlinput"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$DoubleArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Doubl eArguments
There are 2 fields defined in this class.
adding option "doublearg1"
adding option "doublearg2"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$RawStringArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$RawSt ringArguments
There are 1 fields defined in this class.
adding option "cmd"
CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchutil.OUSession"
initializing String option 0, fp
initializing String option 1, dp
initializing String option 2, fr
initializing String option 3, dr
initializing String option 4, mp
initializing String option 5, phbasedir
initializing String option 6, phbasefile
done init. String arg.
initializing Boolean option 0, delay_link
initializing Boolean option 1, cmd_end
done init. Boolean arg.
initializing Integer option 0, integerarg1
initializing Integer option 1, integerarg2
done init. Integer arg.
initializing StringTeger option 0, stringtegerarg1
initializing StringTeger option 1, stringtegerarg2
initializing StringTeger option 2, ps
initializing StringTeger option 3, mp
initializing StringTeger option 4, xmlinput
done init. SringTeger arg.
initializing Double option 0, doublearg1
initializing Double option 1, doublearg2
done init. Double arg.
initializing RawString option 0, cmd
done init. RawString arg.
CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchutil.OUSession", don e.
CmdLineParser::initRuntimeOptions()
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$StringArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Str ingArguments
There are 3 fields defined in this class.
adding option "phbasedir"
adding option "patchids"
adding option "phbasefile"
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$BooleanArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Boo leanArguments
There are 2 fields defined in this class.
adding option "booleanarg1"
adding option "booleanarg2"
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$IntegerArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Int egerArguments
There are 2 fields defined in this class.
adding option "integerarg1"
adding option "integerarg2"
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$StringtegerArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Str ingtegerArguments
There are 2 fields defined in this class.
adding option "stringtegerarg1"
adding option "stringtegerarg2"
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$DoubleArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Dou bleArguments
There are 2 fields defined in this class.
adding option "doublearg1"
adding option "doublearg2"
CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchprereq.PQSession"
initializing String option 0, phbasedir
initializing String option 1, patchids
initializing String option 2, phbasefile
done init. String arg.
initializing Boolean option 0, booleanarg1
initializing Boolean option 1, booleanarg2
done init. Boolean arg.
initializing Integer option 0, integerarg1
initializing Integer option 1, integerarg2
done init. Integer arg.
initializing StringTeger option 0, stringtegerarg1
initializing StringTeger option 1, stringtegerarg2
done init. SringTeger arg.
initializing Double option 0, doublearg1
initializing Double option 1, doublearg2
done init. Double arg.
CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchprereq.PQSession", d one.
reqVer For using getEnv() = 10.2.0.4.0
curVer = 10.2.0.2.0
Current Ver later than required? :false
Current Ver equals required? :false
Checking EMDROOT using OUI's API...
CmdLineParser.processOPatchProperties() begins
CmdLineParser.processOPatchProperties() ends
OUIReplacer::runEnvScript() called
SystemCall:RuntimeExec(cmds, runDir): GOING to start thread to read Input Stream
SystemCall:RuntimeExec(cmds, runDir): Started thread to read Input Stream
SystemCall:RuntimeExec(cmds, runDir): GOING to start thread to read Error Stream
SystemCall:RuntimeExec(cmds, runDir): Started thread to read Error Stream
SystemCall:RuntimeExec(cmds, runDir): GOING into process.waitFor()
ReaderThread::run(): Stream ErrorStream about to be read
ReaderThread::run(): Stream InputStream about to be read
ReaderThread::run(): Stream InputStream reading completed
ReaderThread::run(): Stream ErrorStream reading completed
SystemCall:RuntimeExec(cmds, runDir): process.waitFor() is OVER
SystemCall:RuntimeExec(cmds, runDir): Error stream thread joined successfully
SystemCall:RuntimeExec(cmds, runDir): Input stream thread joined successfully
OUIReplacer::setKeyValue() called
OPatchSession::main()
Environment:
OPatch.ORACLE_HOME=/u02/oracle/PROD/db/tech_st/10.2.0
oracle.installer.invPtrLoc=/etc/oraInst.loc
oracle.installer.oui_loc=/u02/oracle/PROD/db/tech_st/10.2.0/oui
oracle.installer.library_loc=/u02/oracle/PROD/db/tech_st/10.2.0/oui/lib/linux
oracle.installer.startup_location=/u02/oracle/PROD/db/tech_st/10.2.0/oui
OPatch.PLATFORM_ID=
os.name=Linux
OPatch.NO_FUSER=
OPatch.SKIP_VERIFYnull
oracle.installer.clusterEnabled=false
TRACING.ENABLED=TRUE
TRACING.LEVEL=2
OPatch.DEBUG=true
OPATCH_VERSION=10.2.0.4.6
Bundled OPatch Property File=properties
Minimum OUI version: 10.2
OPatch.PATH=/u02/oracle/PROD/db/tech_st/10.2.0/perl/bin:/u02/oracle/PROD/db/tech_st /10.2.0/bin:/usr/bin:/usr/sbin:/u02/oracle/PROD/db/tech_st/10.2.0/appsutil/jre/bin:/us r/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/ bin:/usr/X11R6/bin:/home/oragold/bin:.
Stand-Alone home : false
Environment:
OPatch.ORACLE_HOME=/u02/oracle/PROD/db/tech_st/10.2.0
oracle.installer.invPtrLoc=/etc/oraInst.loc
oracle.installer.oui_loc=/u02/oracle/PROD/db/tech_st/10.2.0/oui
oracle.installer.library_loc=/u02/oracle/PROD/db/tech_st/10.2.0/oui/lib/linux
oracle.installer.startup_location=/u02/oracle/PROD/db/tech_st/10.2.0/oui
OPatch.PLATFORM_ID=
os.name=Linux
OPatch.NO_FUSER=
OPatch.SKIP_VERIFYnull
oracle.installer.clusterEnabled=false
TRACING.ENABLED=TRUE
TRACING.LEVEL=2
OPatch.DEBUG=true
OPATCH_VERSION=10.2.0.4.6
Bundled OPatch Property File=properties
Minimum OUI version: 10.2
OPatch.PATH=/u02/oracle/PROD/db/tech_st/10.2.0/perl/bin:/u02/oracle/PROD/db/tech_st /10.2.0/bin:/usr/bin:/usr/sbin:/u02/oracle/PROD/db/tech_st/10.2.0/appsutil/jre/bin:/us r/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/ bin:/usr/X11R6/bin:/home/oragold/bin:.
Stand-Alone home : false
Oracle Home : /u02/oracle/PROD/db/tech_st/10.2.0
Central Inventory : /home/oragold/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.4.6
OUI version : 10.2.0.2.0
OUI location : /u02/oracle/PROD/db/tech_st/10.2.0/oui
Log file location : /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch2009-0 3-30_16-59-59PM.log
Patch history file: /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch_histo ry.txt
OUISessionManager::instantiate()
lockCentralInventory(): OUISessionManager::lockCentralInventory() will retry 0 times w ith 120-second interval to get an Inventory lock.
OUISessionManager::lockCentralInventory() try round # 1
OUISessionManager::setupSession()
OUISessionManager::setupSession() instantiates a OUIInventorySession obj.
OUISessionManager::setupSession() init. the session
OUISessionManager::setupSession() sets up READ-ONLY session
OUISessionManager::setupSession() done
OUISessionManager::lockCentralInventory() set up session OK
reqVer = 10.2
curVer = 10.2.0.2.0
Current Ver later than required? :true
Current Ver equals required? :false
OracleHomeInventory::createInventoryObj()
OracleHomeInventory::createInventoryObj() gets OUIInventorySession object
Locker::lock()
calling lockCentralInventory()
OUISessionManager::getInventorySession()
Caller Details:
Caller Name : OPatch Caller Version : 10.2.0.4.6 Requested Read-only ac cess : true Oracle Home : /u02/oracle/PROD/db/tech_st/10.2.0
OUISessionManager::register()
Registering the caller : OPatch
OracleHomeInventory::createInventoryObj() gets OUIInstallAreaControl object
OracleHomeInventory::createInventoryObj() gets OUIInstallInventory object
OracleHomeInventory::createInventoryObj() gets OUIOracleHomeInfo object
OracleHomeInfo::lock() fails, and there is no retry supported.
OracleHomeInventory::createInventoryObj() gets a null OUIOracleHomeInfo object
OracleHomeInventory::createInventoryObj() tries to print a list of Oracle Homes on thi s system
OracleHomeInventory::createInventoryObj() Your Oracle Home path: "/u02/oracle/PROD/db/ tech_st/10.2.0"mes on this system:
Home name= OraDb10g_home1, Location= "/u02/oracle/PROD/db/tech_st/10.2.0/db/inventor y/prereqs"
OracleHomeInventory::createInventoryObj() construction doneInventory::loadAndPrintInventory()
Retrieving inventory from Oracle Home...
OracleHomeInventory::load()
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
Oracle Home dir. path does not exist in Central Inventory
Oracle Home is a symbolic link
Oracle Home inventory is corrupted
Locker::release()
OUISessionManager::unRegister()
Un-Registering the caller : OPatch
LsInventory::getInstance() returns
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
Cleaning up the directory : "/u02/oracle/PROD/db/tech_st/10.2.0/.patch_storage/patch_u nzip"...
OPatch failed with error code 73
[oragold@apps OPatch]$ -
EPMAPatch Error: Opatch failed with Error Code = 73
Hi All,
I am trying to Install the Patch EPMA11.1.1.2.03, I got error.
The Error is: F:\hyperion\Opatch>hpatch apply EPMA_11_1_1_2_03
Invoking Opatch 10.2.0.4.9
Oracle Interim patch Installer version 10.2.0.4.9
Copyrights <c> 2009, Oracle corporation. All rights reserved.
Oracle Home:f:\Hyperion
CentralInventory:C:\Programfile\Oracle\Inventory
From:n\a
OPatch version:10.2.0.4.9
OUI Location:f:\hyperion\oui
Logfile Location:f:\Hyperion\cfgtoollogs\opatch\opatch2010-07-05_14-32-38PM.log
Patch history file:f:\ Hyperion\cfgtoollogs\opatch\opatch_history.txt
ApplySession applying interim patch ‘9206696’ to OH ‘f:\Hyperion’
List of Homes on this system:
OPatch Session cannot load Inventory for the given Oracle Home f:\Hyp[erion. Possible causes are:
No read or write permission to ORACLE_HOME/.Patch_storage
Central Inventory is locked by another OUI Instance
No read permission to Central Inventory
The lock file exists in ORACLE_HOME/.Patch_storage
The Oracle Home does not exist in Central Inventory
Apply session failed:Apply session failed to prepare the system. Oracle Home Inventory gets null oracleHomeInfo system Intact, patch will not attempt to restore the system
Opatch failed with error code = 73
Please help,Its urgent for us
Thanks in advance.792208 wrote:
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanksif the connection request actually gets to the listener, then it will be logged.
If no record exists within listener.log file, then the root cause & solution are external to Oracle. -
Hi All,
I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
If anyone could assist with this is would be much appreciated.
Many thanks
Logs below:
<![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
<![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
<![LOG[Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
DateTime = "20141218122103.273000+000";
PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 1752;
]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
<![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
<![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
<![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
<![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
<![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
<![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
<![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
<![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
<![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
<![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80 CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
thread="1752" file="libsmsmessaging.cpp:8422">
<![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
<![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
<![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
<![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
<![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
<![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
file="tsmanagerutils.cpp:118">
<![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
<![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
file="tsmanagerutils.cpp:165">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
<![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
<![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
<![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">4005 can mean a few things, Some common can be The wrong BIOS time, or a a bad Hard drive. look at those two first.
-
Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help
I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?
Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen -
Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name: Application
Source: MSExchangeRepl
Date: 28.09.2012 00:37:17
Event ID: 2112
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name: Application
Source: MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID: 2024
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User:
N/A
Computer: Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
- * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
MarkusHi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus -
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellmeWell here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance! -
SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.
Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssisHi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan -
Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
MudassarThats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Maybe you are looking for
-
I have both iPhone and iPad that will not send emails when I am connected via wi if. Have tried three wi if networks. I get a messag that says the sender address (my address) was rejected by the server. Any ideas on what I need to do? Rusty
-
Mail in Macbook, no content only headers
Mail messages in one of my maps only show the headers, no content. This suddenly happened, what can I do? The other messages in other maps are ok. How can I get the content back? It is very important. Thanks, grtz. Marike
-
The Adobe Application Manager prompts me to restart the download
Photoshop took 6 hours on my internet connection which is horribly slow. The problem is that if you have any trouble at all with the installation (like a file open you need to close) it RESTARTS THE DOWNLOAD. Can't you just save the files on my di
-
Can i remove the URL String part jsessionidand replace it with asdfsessidfor exnample? is there some configuration (XML) code?
-
Time Capsule on Mavericks Different?
have noticed that Time Capsule Disk, is no longer appearing on my Desltop and as the backup is occurring The little watch does not Spin? I deleted the old BU after working with Mavericks and really loving it. So I decided that a New Bu was in Order.