Pavillion x2 cant project to another creen try updating driver or try a different video card

I dont know if i could watch my laptop on my tv before hand but i assume i could as its a new pc ive just updated to windows 8.1 and plugged in my hdmi cable to my laptop pressed the f4 button and get a message "cant connect to another screen try updating drivers or use a different video card" my pc says driver is up to date any ideas please help!!!!

Hello @h14ppy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to successfully connect your notebook computer to your HDMI TV, and I would be happy to help!
For further assistance, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If you are using an adapter between the notebook and the TV.
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Trying to reingtall win7 on pavillion dv7 cant get past a dialog select the driver to be installed

Hi I have a HP Pavillion DV7-4065dx Refurbished Notebook PC with the following specs:
AMD Phenom II Triple-Core N830 2.1GHz
4 DDR3
500 HDD
Blu-ray
17.3" Display
Windows 7 Home Premium 64-Bit
MPN: RB-WQ861UA
Serial Number: [Personal Information Removed]
I recently tried to reinstall my windows and made the mistake of loading windows 7 Home Premium x86 (32 bit) when it should have been Windows 7 Home Premium 64 bit and my fingerprint reader wouldn't install. I tried upgrading to the 64 bit which failed with a message about incompatible hardware. I tried doing a HP System restore from both the restore drive and from backup disks I didn't have any luck with either. The restore using the 5 cds I created made it to the 5th cd and then failed without any reason other than error code "HP Recovery Manager error Code 0xe0ef000e" and told me to contact HP Support.
I have deleted my partitions and created just one partition at this point and tried to install windows 7 Home Premium 64 bit and it starts off ok but gets to a dialog that says install windows => select the driver to be installed => and I can't get beyond this point. It doesn't tell me what driver it is looking for and my only options are browse and rescan because next is grayed out.

Hi:
Your PC should not require any special drivers for W7 to install.
Try downloading the W7 Home Premium SP1 64 bit iso file from the link below and follow the instructions to use the Microsoft ISO to USB tool.
Make sure you get the whole file to download. Make a note of the advertised size and compare that with the actual file that downloaded. Sometimes it states the download was complete but the whole file isn't there.
Use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link below. You need a 4 GB flash drive to use the USB method of compilation.
http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...

Have a 2007-2008 macbook cant use itunes due to needing updates

have a 2007-2008 macbook cant use itunes due to needing updates. when i try to update one thing it keeps telling me i need to update another think and its like a chain i dont understand and cant keep up with , not tech savvy, any advice?

What version of OS X are you running now?

I have saved my project to my harddrive and then when I try to open it on another computer that uses final cut I am unable to open the edited project

i have saved my project to my harddrive and then when I try to open it on another computer that uses final cut I am unable to open and edit the project

Assuming this is an external HD, use finder to select the drive with your original computer, then press Cmd+i to show info. Go to the bottom of the info window and make sure 'Ignore ownership of this volume' is checked so that other computers can access it.
Andy

Can I copy clips from one project to another? The clips are still frames captured within a video event.

Can I copy clips from one project to another? The clips are frames saved as stills from a video event. I try the copy & paste but it does not seem to work.

The video was converted into MP4 and then I could get it into iMovie events. I had right clicked and saved farmes as stills. ABout 50 of them, When I tried to copy and paste those stills into another project I couldn't. They came up blank.
I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them. So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it. (This is for a 1961 Class Reunion, so it's old stuff). Seems to work so far.
So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else. Do you know a way around this?

Copy tracks from one project to another

(Hopefully, I'm just missing something obvious. Programs like Final Cut Pro and PhotoShop make it very easy to have multiple projects open and copy and paste between them.)
I frequently copy tracks I like from one project to another. Although it's possible to do, it seems a given that Logic doesn't not like to have more than one project open at a time. This complicates it a bit, but I just copy the track I want, close the current project and open the new one.
I wish in the edit menu or in the track drop-down menu there was a straight forward "Copy Track" option. Since there isn't, I just select the whole track (which is essentially all the regions) and copy and then paste into new project. The problem is that it brings the content over fine, but not the track info (name, etc.)
Is there some better way to accomplish this? I don't want to export MIDI tracks as audio, so the Export option doesn't work.
Thanks,
Dave

Harmonica_Lessons wrote:
I looked at the video again and unless they did some editing in FCP (which would have to be the case), the following frame after selecting the regions shows both gone simultaneously.
It is quite possible of some FCP editing but as I said first you can do that very fast using two neighbor keys so it can look as one magic shot. The screen capture tools use low FPS settings for media capturing about 15 fps for example.
I tend to occasionally put a blank track between other tracks as a separator (been doing this since the Master Tracks Pro days).
I think you can try a little trick for doing that. You can create a "Dummy" empty region inside a folder track for example, and use the folder track(s) as separator(s). I have not tried that yet, cause I'm away of my Logic but it must work this way.
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Moving photos from one project to another

So, I'm painfully new to aperture but I was under the impression that if I drag and drop a group of photos from one project to another, it would MOVE the photos to the new project (as described here: http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=5%26sec tion=14%26tasks=true). When I do this, the images remain in the original project and it does get added to the second project (in an album under the new project). When I try to delete them from the original project, it also deletes them from both the original project and the new album in the new project. When I "Undo" the delete, it restores the photos to both the original project and the album under the new project.
Am I missing something?

The problem is you are dragging them into an Album not a project.
If you drag them into the project they will be moved. If you drag into an Album they remain in the original project as well as appearing the album. (in the album they are really pointers back to the originals in the project)

Embed one project into another (nesting)

One feature that I would love to have in a slide show software is the ability to embed one project into another. Is this a feature of Keynote?
Here is where it would be handy:
I was in a band an we needed to put all of the lyrics for our original songs up on the big screen when we were playing. Neither or "set list" nor order was finalized, but was going to be 10 songs out of a possible 15. We wouldn't know until only minutes before going on. Since I play bass and had to be on stage, I had to have it simple enough for a 12 year old kid to run the presentation.
I could figure no way that I could possibly cut and paste and remove all the slides into the correct order right before going on stage. I worried about this for 2 days and figured out what to do.
I used Adobe Indesign and set each song up as it's own file. Then using InDesign's build book feature, I linked all the files into a book file. 5 minutes before the show, I resorted the chapters in the book file, and exported to PDF. I ran the PDF in full screen mode and the 12 year old girl just sat there and hit the spacebar for our songs. It worked perfectly.
Is there a way that I can do separate projects in Keynote and assemble them quickly like I did with InDesign and Acrobat?
Thanks,
Kirk

OK, if you don't want them all in the same Keynote file so you can hyperlink around the file to the desired slide numbers, then try this.
Create your Keynote of a song. Name it easily so you can find it easily. At the end of each song keynote, put a "Return to Index" and hyperlink it to the Keynote with the program. On the program slide you can Name the songs, Song 1, Song 2, Song 3, and Song 4. Of course, you can enter the name of the song in the program slide. If you use the generic name the process of creating the hyperlink is an easy one (it's even easy if you enter the name of the song you want). If you keep all song Keynotes in the same folder with the index, it's a matter of selecting the file title as the Keynote slideshow to hyperlink to. So you can change the four songs in a program presentation in about 2 minutes max. so you get:
File name: Agenda
Modern Church of God
Sunday, October 10, 2010
Reverent I M. Religious, presiding
10:30 am
Call to order
Song 1 (hyperlink to "Rock of Ages")
Processional
Prayer
Song 2 (hyperlink to "Bringing in the Sheaves")
Announcements
Reading
Song 2 (hyperlink to "Ave Maria")
Sermon, "How do we maximize our resources."
Song 3 ((hyperlink to "Jesus Loves Me")
Digressional
Song 4 (Oh, What I friend we have in Jesus)
At the end of the Rock of Ages lyrics Place
"Return to Program" and hyperlink to "Agenda"
For the next week, "Agenda 10/17" Change the hyperlinks for songs to the new selection of keynotes you have created earlier. It will take about a minute or two to make the changes. You do each one by clicking the Enable hyperlink selection box when one of the song references is selected. The pull the pull down menu to Keynote Slideshow. A box will open. Go to your folder with all song and agenda files. Select the song keynote you want to access with the click, when you select the song file and click "Open" your connection is made. You then project the agenda file on Sunday morning. When you reach song 1, you click on it and the song's keynote comes up. When the song is finished, click on Return to Program and your program Keynote is back up.
The only time consumer in this process is entering the song lyrics into their own keynote files. If you have somewhere to copy and paste the words, then it's easy. The mechanics of creating the weekly connection is very easy. Once you have your resources created, preparation time for a Sunday program will be only a long as it takes you to enter the planned agenda components.

When attempting to edit a project in the PWA I receive the error: 'An error occurred while opening your project. Give us a few minutes and try again...' Project Server 2013

Hello,
I am hoping someone can assist with the error we are encountering when trying to edit a project from the PWA in Project Server 2013. I can click on the project name and go to the detail page and I can
click and see the schedule. However, if I click on a task in the schedule and attempt to edit it, I receive the following error:
'An error occurred while opening your project. Give us a few minutes and try again. If this happens again, contact your administrator.'
At this point I must click cancel twice to get rid of the error pop-up message. At this point, I am no longer able to look
at the schedule of the project either. Can someone assist with this issue?
Thanks

Hi antonio,
In addition to Phani's advice, which version of IE are you using?
Can you reproduce the issue on another mahcine and with another browser?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Sending Final Cut Project to Another editor

Does anybody know what's the best way to send a Final Cut Project to an editor in another city? I need it to include all the clips, the audio, and the sequence. You're suggestions will be greatly appreciated.
MAC book Pro Mac OS X (10.4.10)

Try using Media Manager to completely copy all the project's media to the firewire drive. It's easy to miss imported files or images which might not be in your capture scratch or render folders. Media Manager should make a complete copy of the project for you on another drive, so they'll have access to everything.
--Tex

How to call method of one EJB3.0 project in another EJB3.0 project

Hi,
I would be thankful if someone could help me in this -
I am using SAP Netweaver 7.2 and have two EJB3.0 projects.
Now I am trying to instantiate a class of one EJB project into another and when I get a run time exception as -
javax.ejb.EJBException: nested exception is: java.lang.RuntimeException: java.lang.NoClassDefFoundError
I have tried to add it under the Java Build Path -> Projects but it only helps during compile time.
I have also tried checking the projects under "Project References" but it still gives the same problem
Here is the code and where exactly its failing -
import java.util.ArrayList;
import java.util.logging.Logger;
import javax.ejb.ActivationConfigProperty;
import javax.ejb.MessageDriven;
import javax.jms.Message;
import javax.jms.MessageListener;
import org.csagroup.wsecomm.OrderSearch;
import org.csagroup.wsecomm.SalesOrderSearchQueryInImplBean;
import VendaOrders.ServiceClientImpl;
import com.sap.scheduler.runtime.JobContext;
import com.sap.scheduler.runtime.JobParameter;
import com.sap.scheduler.runtime.mdb.MDBJobImplementation;
import com.sap.xi.appl.se.global.SalesOrderID;
* Message-Driven Bean implementation class for: HelloWorldBean
@MessageDriven(
          activationConfig = {
                    @ActivationConfigProperty(propertyName = "messageSelector", propertyValue = "JobDefinition='HelloWorldJob'"),
                    @ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue") })
public class HelloWorldBean extends MDBJobImplementation {
     * @see MessageListener#onMessage(Message)
     public void onJob(JobContext ctx) {
         Logger logger = ctx.getLogger();
         logger.info("Hello World Testing onJob().....");
         try
              logger.info("Before Order Search...");
              OrderSearch os = new OrderSearch();   *// this is where it fails*
              logger.info("Before os...");
              SalesOrderID salesOrderIdBeginRange = new SalesOrderID();
              logger.info("Before salesOrderIdBeginRange...");
              salesOrderIdBeginRange.setValue("1");
              logger.info("After setValue(1)");
              SalesOrderID salesOrderIdEndRange = new SalesOrderID();
              logger.info("Before salesOrderIdEndRange");
             salesOrderIdEndRange.setValue("99999");
             logger.info("After 99999");
             os.setBeginRange(salesOrderIdBeginRange);
             os.setEndRange(salesOrderIdEndRange);
             SalesOrderSearchQueryInImplBean salesOrderSearchQueryInImplBean = new SalesOrderSearchQueryInImplBean();
             logger.info("After salesOrderSearchQueryInImplBean");
         } catch (Exception e){logger.info("Exception is...." + e.getLocalizedMessage());}
        // TODO Auto-generated method stub
I am able to see the message in my logs till "Before Order Search.." and fails when I try to instantiate OrderSearch class which is in another EJB 3.0 project.
Thanks for the help in advance.
Edited by: Shiv Khullar on Aug 19, 2010 10:30 PM

Hi,
I am not sure if my posting was in readable format.
As soon as try to add the code, all the formatting is lost.
I would explain once again - My code is generated by the webservice "Generate Client code" i.e using WSDL into an EJB 3.0 Project. Now I am trying to call a method of the bean which takes a class object (OrderSearch) as the parameter.
When I am trying to instantiate this OrderSearch class in my another EJB3.0 project its failing.
Safter- Thanks for your reply but can someone help me who has worked on a similar issue.
Thanks,
Shiv

Copying Objects One Project to Another

I am trying to copy some obejcts from one project to another.
Both files are version 2. I select import, then from the filmstrip
I clear all, then select objects only, then tell it wht slide I
want them on. It acts like it's working, but noting happens. The
object don't show up.
Any insight is appreciated.
Bill

As we both have found out, no question is a silly one. I have
one click box, one highlight, and a text caption. I am creating a
simulation for a 1st level manager. When I create the sim for teh
2nd level manager the backgrounds are different but the same object
apply. Rather than create the click, highlight and captions all
over, I wanted to use the import feature. It just made sense. I'll
give ADOBe a call and see if they know of any work around.
One thing I did notice, when I do try and import the objects
to a slide I get a very fast progress indicator. The objects do not
appear on the slide. Then if I go to exit it tells me the project
was changed and I need to save it. The when I do save it takes 4-6
miutes to save. Odd becasue no changes are visible.

Hi, im getting an error message, "expected identifier" and another one, "expected expression" when i try a c program in xcode

hi, im getting an error message, "expected identifier" and another one, "expected expression" when i try a c program in xcode

You have errors in your C code. If you want anyone to be able to help you, you need to post the code. You also should tell us the version of Xcode you're using and the type of Xcode project you created for the C program.

Moving Files from one project to another??

New to Aperture ..and wondering is there an easy way to move files from one project to another? Or to move from one Album one project to another Album in another project if the Albums have the same name?
thanks in advance,
Steve

schorney wrote:
New to Aperture ..and wondering is there an easy way to move files from one project to another?
Yes, simply drag-and-drop a thumbnail from a Project to another Project; or Option-drag-and-drop (one way copies the image, the other way moves the image).
Or to move from one Album one project to another Album in another project if the Albums have the same name
Although Albums can be located in Projects, Albums are really not "in" Projects as regards where the images come from. Each album is simply a virtual collection of pointers to images; the images pointed to can be located in multiple Project(s). So just drag-and-drop a thumbnail image from any project to an album to add a pointer for that image to that album.
Although it seems complex it really isn't. Albums are a very powerful organizational tool with essentially zero overhead. Try it. Create some test albums in various ways just to see what happens and delete the albums when you are done. Since Albums consist of just "pointers" we can make/delete them at will for any reason.
Note that Albums can be deleted with no warning message because Apple figures a simple collection of pointers is not that big a deal. Personally I think Album-deleting should have a (non-dire) explanatory warning message, because sometimes an album can consist of a complex collection of pointers.
Multiple Albums should never have the same name.
HTH
-Allen Wicks

How to copy part/all of a project into another project in PE4?

Is there a way to copy some or all of the workof one projedt ( clips, transitions and effects) into another project. I would especially like to use the same rolling credits in all my video's. I've tried copy/paste and Get Media from a file but I get "file format not supported" when I try to import a .prel (project)

There is a also a Clipboard "extender," ClipMate, that will allow one to Copy/Paste from one Project to another. I have not used it, but many have and few have any issues.
The Export to DV-AVI method is the main one. The only thing to think about is that you will want either a perfectly tight edit, before the Export, or a very loose edit (I'd go so far as to add 02 sec. of Black Video between un-Trimmed Clips), as you will not want to, say replace a Transition, as you would have to Trim even more of your Clips to create the necessary Handles.
Good luck,
Hunt

Pavillion x2 cant project to another creen try updating driver or try a different video card

Similar Messages

Maybe you are looking for