Pay each document alone does not work.

"Pay each document alone" does not work at supplier level.
I have a supplier with active flag in "Pay each document alone" but it doesn´t work.
Only works at invoice level.

Hi,
The patch mentioned is already applied so no patch application in required. I reviewed the setup supplier and I found it was in error, I checked the flag "pay alone" at site supplier level.
Regards
BR

Similar Messages

HP Laserjet 1536dnf MFP document feeder does not work

HP Laserjet 1536dnf MFP document feeder does not work. I tried the suggested unplugged/plug and wait the required time but still no luck. Any suggestions? It does not even recognize that there is paper in the document feeder. Prior to this occuring, it used to say "document loaded"...now it says nothing. I do not even get an error message. It just does not work.

Hi @jdm328 ,
I see that you are having issues with the ADF not recognizing the paper loaded. I would like to help you out today.
It might be a hardware or paper sensor issue with the printer, not detecting the paper being loaded.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I have provided a document with steps for cleaning the ADF rollers and the separator pad, to see if that will help.
'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o...
Disregard the title.
Try to make a copy again.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing the document grid does not work

Hi,
I got here a lot of master documents. The design is built with a squre document grid. I need to print or export it as PDF. But activating the checkbox does not work. Is it possible to print it? Ruler guides and the base grid are working. But I need to print the document grid.
Is there any possiblility to to this?
Thanks
DerSiedler

Printing the document grid is not an option, but you might be able to work around it by creating your own grid using Layout > Create Guides... then printing the visible guides.
I'd do that on a separate layer. If you want the grid, but not other guide, make a real grid with colored strokes using step and repeat, again on a separate layer.

Document feeder does not work

I bought a new M225dw and set it up. Was working fine. My secretary was copying some documents and they got jammed in the feeder. She pulled them out and since then the feeder does not work for faxing or copying. It does pull in two pages at a time about half way and that's it. What do I do? Thanks.

Hi @aimhighflyboy,
I see by your post that you are unable to scan by using the ADF from the printer. But you can scan from the PC and the Mac through the software. I can help you with this.
I have provided a document to check to make sure the Scan to Computer is set on the computer.
A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning.
Can you scan from the glass from the printer to the Mac?
Can you make a copy from the ADF?
Did you mean you can scan from the printer to the PCS?
What operating system are you using on the Mac and the PCS? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Slideshow with individual timing for each photo just does NOT work!

i am in slideshow mode with all the jpegs on top
i go to settings
it has DEFAULT settings for the entire slideshow
it does not say each photo gets its own timing.
the arrows for the transition direction are greyed out
am i the only one who cant get this?
where does it say set a time for each individual photo
at the end of my rope
OT or anyone have you got a way to explain how to get individual timings for each jpeg in a slideshow ( source )

yeah i got it working and it certainly can be done in iphoto
there is so much arduous work one has to do to learn these i lives!!!!
you first send it to DVD
then it lands in iphoto
and you can absolutely do what you said one cant cos i just did it.
what a day all day long a learning curve for sure.

Split document function does not work accurately by size

Hello there,
I am using Acrobat Pro 9.4.2
I tried to split a document of about 15 mb size (420 pages) into 5 equal size of documents (3 mb) for sending through mails.
However, I find the generated documents are of different sizes, some are more than 3 mb and some less than 3 mb. I tried splitting by number of pages but some pages have graphics, so again the result is uneven.
Finally, I increased the number of splits and just clubbed about 3 or more files together to manage the 3 mb limit.
The original file have bookmarks but the split documents do not have any.
It has only one top level bookmark so I could not split by bookmarks.
Question is: Is there any way to split the document accurately by size. Additionally, I need to retain the related bookmarks in each split including the inital view of bookmark panel & page.
Thanks for reading this.

Unfortunately, Adobe acknowledged right after they released Acrobat 9 that there is a bug in the File Size option of the Split Document feature and that it would not be fixed until Acrobat X release. (I have not looked at X to see if they have actually fixed it or not)
Despite the fact that they knew there was this problem, they decided to get people to pay for the new version rather than fix their mistake in their version within one of their patches, but rather to force people to pay a few hundred more dollars for a new version. Ick.
The only real solution is to split the documents and then to combine those documents that are not close to what you are seeking. I know, I know. It's lame, and as much as I love using Acrobat products, this philosphy is less than honorable.

A posted document link does not work in EP.

I am trying to add a posted page of BPC Web, into EP. But the posted link (as http://xxx.xxx.xxx.xxx/OSoft/Common/ShowFile.aspx?FILE=DESKTOP.HTML&TYPE=DOC) shows below error message. The link does not have any problem in case that it is displayed in BPC Web.
Does anyone know how to use the link as a separated link?
below -
Server Error in '/OSoft' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
   OSoft.Consumers.ZFP.WebBase.PageBase.get_UserCultureCode() +44
   OSoft.Consumers.ZFP.WebBase.PageBase.GetZFPText(Int32 intID, String strParam1, String strParam2, String strParam3, String strParam4, String strParam5) +42
   OSoft.OSoft_Error.Page_Init(Object sender, EventArgs e) +51
   System.Web.UI.Control.OnInit(EventArgs e) +67
   System.Web.UI.Control.InitRecursive(Control namingContainer) +241
   System.Web.UI.Page.ProcessRequestMain() +197

Hi Jungho,
When we applied SSO22KerbMap module to BPC IIS web server, but the system encountered the error to folk the BPC web page. How do you fix the setting for enabling SSO22KerbMap and BPC both ?
Regards,
Rick Ni

Adobe PDF IFilter for document searches does not work

I am new to full text indexing of documents but I know enough to get the files into the database and apply indexing and searches because I got it to work for Word (.doc) files.
I'm trying to get Adobe's Ifilter version 11 to work in Windows 7 x64. I'm using Sql Server 2012 Express with Advanced Services sp1. I have included the full path to the /bin folder for the PDF dll in my PATH environment variable per the instructions.
Register ifilters (after install)
EXEC sys.sp_fulltext_service 'load_os_resources', 1;
Verify that the .pdf filter is installed:
EXEC sys.sp_help_fulltext_system_components 'filter';
This is the row I get for PDF which I delimited with ';'. The underline portion is what I have in PATH env variable.
filter; .pdf; E8978DA6-047F-4E3D-9C78-CDBE46041603; C:\Program Files\Adobe\Adobe PDF iFilter 11 for 64-bit platforms\bin\PDFFilter.dll; 11.0.1.36; Adobe Systems, Inc.
The file content column is
content VARBINARY(MAX) NOT NULL
I insert the file with
INSERT INTO dbo.Documents (filename, doctype, content)
SELECT
N'MyFile',
N'pdf',
bulkcolumn
FROM OPENROWSET(BULK 'C:\MyFile.pdf', SINGLE_BLOB) AS doc;
I reboot the machine and rebuild the Full Text Catalog after installing the PDF iFilter.
Then I search with one of these. There are Word and PDF files that contain 'apple'.
SELECT id, filename, doctype FROM dbo.Documents WHERE FREETEXT(content, N'apple');
SELECT id, filename, doctype FROM dbo.Documents WHERE CONTAINS(content, N'apple');
Now this all works well for .doc files but .PDF files never show up in searches. I have tried both version 9 and version 11 to no avail.


Hello,
We believe we have figured this out. It looks like it has to do with the length of the default folder location for the Adobe iFilter.
I was able to reproduce the issue and the following resolved it for me. See if this resolves it for you all as well.
Here is how to get Adobe Version 11 PDF filter to work.
1 . If you haven’t already, run the following in SQL Server:
Sp_fulltext_service ‘Load_os_resources’, 1
Go
--you might also need to run:
sp_fulltext_service ‘Verify_signature’,0 --This is used to validate trusted iFilters. 0 disables it. So use with caution.
--go
2. Stop SQL Server. (Make sure FDHost.exe stops)
3.
Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
4.
Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
C:\Program Files\Adobe\PDFiFilter\BIN
NOTE: it must include the BIN folder
NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
6. Start SQL Server
7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname') --Note: Change db to be the actual database name and tblname to be the actual table name.
Give this a try and see if this fixes yours.
Sincerely,
Rob Beene, MSFT

In an outgoing email message the "attach" document icon does not work in firefox. It does work when using internet explorer. How can I get the "attach" key to work when using firefox?

Using firefox, if I am composing a new message in my hotmail account the "attachment" icon is not active, so nothing happens when I click on it in order to attach one of my word documents.
The "attachment" icon is active when I am using hotmail and internet explorer.

Firefox 3 will not run on OS X 10.3.9, it requires at least 10.4
Try one of these browsers to see if you can access Hotmail - [http://www.seamonkey-project.org/releases/seamonkey1.1.19/ SeaMonkey 1.1.19] or [http://caminobrowser.org/download/ Camino 1.6.11]

Recently changed documents command does not work

Using DW CS5. German version.
When I want to access all the files that have been changed recently, I get an error message
" when OnClick in SelectRecentlymodified.html , following Javaccript-Errors occured:
In Line 370 of the file "C:Programme/Adobe/Adobe DReamweaver C5/Configuration/Menus/MM/SelectRecentModified.js":
DWfile.getAttributes (listItem) has no properties.
This is the german thread, which did not get any answers yet:
http://forums.adobe.com/thread/718535?tstart=30
Anybody has any suggestions what to do?
Thank you.

Now I realized that this problem occurs only with one site definition.
Anyone has any more suggestions? Could reinstalling DWCS5 help?
Try this -
1. Open DW's SiteManager, select this site's name, and export the site definition (make sure you do a full site definition export including the FTP information). Save the resulting *.ste file in a place where you can find it again.
2. With the site's name still selected in SiteManager, REMOVE the site from DW by clicking the REMOVE button.
3. Now Click on IMPORT and import the *.ste file you just exported.
Is the error still with you now?

Dictionary and selecting words does not work for Japanese documents

iOS 5 includes both English and Japanese dictionaries. However, it seems that dictionary function does not work for Japanese PDF documents, nor can I select any Japanese words in Adobe Reader. Please fix this!
Thanks,
Kenny

You can start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />

The Create List Item workflow action does not work in document library with document template

My end goal is more complex but below is a basic example of the issue I’m having that just simply does not work.
I'm trying to use a site workflow to create an item in a document library that has a document template applied to it but the file that gets created by the workflow is corrupt and cannot be opened.
I created a document library and edited the document template by adding some text to the header and changing it to a Word docx file instead of a Word dotx file. I tested the document template by clicking the files tab in the ribbon and then clicking new
document which opens the document template in Word and allows me to edit and save the document back to SharePoint. Then I created a SharePoint 2013 site workflow in SharePoint Designer that contains a single Create List Item action, and that action creates
an item in the document library with the name field statically defined. I published the workflow and then manually start it on the site. The workflow completes successfully and when I navigate to the document library the document has been created by the workflow.
When I click on the document to open it in the Word Web App it throws the error pictured below and if I open it in the Word client application it just opens a blank document and not the correct document template.
I also tried using a SharePoint 2010 workflow with pretty much the same results. Opening the document in Word Web App gives the same error as above and opening the document in the Word client application gives the error pictured below.
Come on Microsoft creating a Word Document in a SharePoint Document Library from a SharePoint Workflow should just work! Is this a bug or does anyone have any ideas on what is causing the this issue?

I had the same problem with corrupted document - this worked for me:
1. Create a 2010 Workflow which creates the list element in a document library
(you may start this workflow from your 2013 workflow if applicable)
2. In the Create New List Item properties - make sure to set ContentTypeId to your content type
("Id for indholdstype" is Danish for "Contenttype ID")
3. Your Content Type template should be a ".docx" file - NOT a ".dotx" file...!
(I have always created my templates for content types as .dotx files - seems Microsoft wants us to use ordinary .docx files as template files for content types)
Hope this helps you!

My MacPro 1,1 will only boot if I resert PRAM each time, and then that does not work each time. When it does boot all is fine. Any idea before I head off to genius bar.

To boot my MacPro now, I have to go thru the reset Pram. Doesn't work each time. I usually don't turn my machine off. Booting in Safe mode does not work...when it doesn't boot I get only a gray screen, no icons in the screen like bad disk etc. I have replaced the battery. My professor son tells me to setup a new drive internally and install a new system and see if the new OS works. I have 3 internal drives with all data on bays 3 and 4... Bay 1 is the system drive with apps only. I'm 70 miles from the closest Apple store and thought I would ask tonight before driving in.

Replacing the PRAM ("backup") battery on the machine may be needed. Here's how, go to page 50 of the user manual:
http://manuals.info.apple.com/en_US/Mac_Pro_User_Guide.pdf

I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
Loïc

Accordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the least very disappointed with such horrible service

Which service did you subscribe to? Adobe PDF Pack?
Once I know the service that you subscribed to, I can move this post to the right forum so that you can get in touch with the folks who can assist you.

Pay each document alone does not work.

Similar Messages

Maybe you are looking for