Payemment Card not been utillised for all 3 delivery Items when back order

Payemment Card not been utillised for all 3 delivery Items when the items are confirmed through Back order.
1 delivery item out of 3 are processed(Billed) with Paymet card.
But why not all 3 deliveries?
Thanks in advance for your valuable inputs.

There is an Order with number 123456 there were three deliveries generated 123,234, and 345.
Only one of those deliveries applied to the credit card(123).
There are products on backorder and when the backorder is relased, they invoice without the credit card.
Actually all above line items in Order 123456 are confirmed through Backorder.
But all three deliveries have to have been processd(billed) through Payement card.
only 123 is billed with Payement card while other 2 are billed through normal invoicing without Payement card.
Hope sir this is clear....
thanks in advance

Similar Messages

  • How to create a single 'not null ' validation for all the items in a page ?

    Hi everyone ,
    how to create a single 'not null ' validation for all the items in a page ? I have many textfields . Instead of creating 'not null' validation for each item , I would like to create a a single validation control that will serve the purpose
    Thanks & Regards
    Umer

    Nice1 wrote:
    bob , as u said I have done the following :
    1) under create button , there are 9 items and for each item I have set Required to 'Yes'
    2) under delete button , there is 1 item and have set Required to 'Yes' for the item
    3) defined page validation for 9 items under 'create ' button and have set it to fire when 'create ' button clicked
    4) defined page validation for 1 item under 'delete ' button and have set it to fire when 'delete ' button clicked
    now , when I click 'create' button it even shows for the item under 'Delete ' button that it is a required itemSorry, I didn't see this note. The required template won't work, there is no way to attach it to the button.
    The best solution is as the reply a couple replies up
    Create 2 page type validations as a PL/SQL with code
    1st validation
    :P1_ITEM1 IS NOT NULL and :P1_ITEM2 IS NOT NULL ...... and :P1_ITEM9 IS NOT NULL  include all 9 items
    Set the When Button Pressed to the CREATE button
    2nd validation
    :P1_ITEM10 IS NOT NULL
    Set the When Button Pressed to the DELETE buttonI think that's going to be the easiest way to do it.
    Edited by: Bob37 on Apr 27, 2012 12:02 PM

  • TS3274 My friend's iPad has not been used for several weeks. When I first turned it on, asked for a four digit pass code. After several wrong "guess" attempts it kept asking for more, with a note saying I cou

    It on, it asked for a four digit pass code. After several guess attempts, making me wait for an hour to try each time, I gave up. The next day, it asked me to connect to iTunes. I remain locked up with that request. I've re-booted several times and get same request.
    Advice!! Help!

    You have to reset the iPad using iTunes if you can not remember your passcode.
    http://support.apple.com/kb/ht1414

  • HT1379 The USB ports on my 30" Cinema are not working.  The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks.  I need to move the computer between two locations, and the other monitor is a 27"

    The USB ports on my 30" Cinema HD display appear to not work.  The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display.  Now I need to move the computer back and forth between two locations using the two displays.  The need for operating USB ports is essential.  Any ideas.  The display appears entirely normal.  Am running OS X 10.9.

    Disregard, problem solved.

  • Zero quantity should not be allowed for STO delivery

    Hi,
         zero quantity should not be allowed for STO delivery.
         when i create a delivery for a STO it should not allow zero quantity
         can someone throw some light.
    Alec

    Hi,
    Please maintain the "B - Create Delivery with qty greater than Zero" in Part.dlv./item  in shipping tab page of the customer of site.
    more briefly: in WB02 --> click on the customer of the site --> Shipping Tab page --> Maintain B (Create Delivery with qty greater than Zero)
    Regards,
    Srini

  • Provision that MRP is not be considered for specific line item of Sales Ord

    Is their any provision that MRP is not be considered for specific line item of Sales Order in MRP run? (Ex: Planned order is also generated for free/ADC sample quantity entered in Sales order)

    Dear
    Go to Sales and distribution--> Sales --> Sales Documents -->Schedule Lines --> Assign schedule line categories.
    Choose the item category (eg. TAN)  which is coming in the sales order and enter CN - No. Mat. Planning in the the manual schedule line category (MSL Ca) for MRP type PD.
    This will enable you to choose while creating sales order in the Tab procurement column SL Ca.
    Choose CN - No mat.planning for the schedule items which you don;t want MRP.
    Regards
    Soundar

  • I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months a year.  So, if I have Icloud for my calendar, and turn on a computer that has not been used for 6 months, does all the old information on that computer to go Icloud?

    I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months each year.  When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud?  Does Icloud push all the new calendar and contact items over the old items?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • Shuffle (2nd Gen) not been used for a few years - not working at all - any ideas?

    My Ipod Shuffle (2nd Gen) has not been used for a long time and now will not give any reponse at all. It won't charge and it is not recognised by ITunes - is there anything I should do?

    Sorry...  I did not notice your reply.
    The initial blinking is good.  That means there is a connection between shuffle and computer.  But it should continue blinking or become a solid color (ON but not blinking).
    It could be a problem with the battery.  If a lithium battery is left completely drained for an extended period, it can become unable to hold a charge.  However, it could also be a problem with the USB port (such as not enough available power or a USB device conflict).  As a test, you should try shutting down the computer and disconnecting all USB devices, including any hub, except for standard keyboard and mouse (if normally used).  If your computer is a laptop, connect its power adapter (so that it's not running on battery power).  Do this to reset the shuffle
    http://support.apple.com/kb/ht1655
    Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on computer.

  • HT4009 I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases.

    I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases. I also have an email receipt with the purchase. Can you please tell me how to resolve this issue?

    iTunes Store: Hiding and unhiding purchases
    http://support.apple.com/kb/HT4919

  • Goods issue has not been posted for delivery

    HI Experts,
    When my user creating the billing he is getting the problemu201Dgoods issue has not been posted for deliveryu201D.
    I investigated and found that in delivery qty for line item 10 (delivery qty is 1 and picking qty is 0) he is not maintained a picking quantity. I asked the user to maintain this. But when he uses the transaction code vl02n he is not able to change the picking quantity from 0 to1 why because the screen is grey mode and one more thing he is not able to cancel the u201CPGIu201D.
    Can any body let me know how to pick a qty in delivery what configuration I have to check .
    Regards,
    Sunina A

    Hello,
    As picking is not activated in the screen, thenyou need to go for a Transfer order Go to VL02N --> subsequent functions --> Create trnasfer order. The system will take you to create transfer order screen (LT03). Save it. Check the delivery whether the pick quantity has been updated ord not? If not then go for confirming the transfer order by transaction LT12. The picking quanity will be picked up. Now proceed with PGI.
    Prase

  • My credit card  has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

    My credit card  has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

    Would be problems with purchases, billing, and redemption option.  It's not 100% exact to your issue, but it will get you to the right department.
    Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption.  Then.. probably pick "My topic is not listed." 

  • AFS ARun: sales order not been selected for the allocation run.

    Hi,
    I am setting up the Purchase-to-Order (similar to Indiv PO item sales order) Process for SAP AFS.
    When doing the Allocation Run (trx J3AT) after Goods receipt of Sales order stock, I get an error that ARun terminated because no requirements were selected. The delivery check report (/AFS/LIEF_CHECK) indicates that the sales order has not been selected for the allocation run.
    For this process, I have set-up an Allocation type with
    1.     Requirement selection that does not exclude MTO/PTO orders
    2.     Set-up stock selection which includes physical stock type for MTO/PTO orders to the customer special stock MSKA with the segment KALAB.
    Can someone suggest what I may have missed?
    Regards,
    PD

    Hi Pankaj, I have same exact issue. How did you fix this ?
    Thanks,
    Mahesh

  • Microsoft Word Has Not Been Installed for the Current User

    Hi, everybody
    I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
    Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
    Routes tried and failed...
    1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
    2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
    At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
    Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
    -Kent S.
    Be strong as a ship and wise as a whale

    These questions are really best in the Microsoft Office Forums.
    These are MS Office Questions not ZEN Questions.
    Novell did not design Microsoft's Office Install.
    I have nothing against snapshots, but it does not work great with the Office
    installs, which you yourself know since you are posting here with problems
    based on that.
    And your other method you are trying with the break out is not working well.
    We also know that from experience.
    We can tell you that the way most people install it and the way most people
    succeed doing it, is by doing it the way recommended and designed by
    Microsoft.
    ZEN does that just fine.
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.
    "KentFSmith" <[email protected]> wrote in message
    news:[email protected]...
    >
    > Thank you, Grimlock (-Grimlock?-)
    >
    > Through a google search I encountered a very close suggestion, and the
    > poster said they couldn't remember the name of a MS utility but that
    > there was one that would break out the individual MSIs from the Office
    > 2007 setup.exe bundle. The dependent app appears to be a simple and
    > possibly elegant solution, but without a good way to break out the MSIs
    > I don't see how to do anything other than with a config.xml ('Config.xml
    > file in the 2007 Office system'
    > (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
    >
    > Do you know of that utility and where I can find it?
    >
    > There is a lot of history here now of just doing the individual
    > applications. Everyone gets Word and Excel, but much fewer get
    > PowerPoint and Access. All other reasons aside, a compelling one is the
    > reduced number of help calls to the Help Desk here. Occasionally we
    > also just run the whole Office install for someone who needs some of the
    > odd utilities, but that is easily cost-justifiable for us to break them
    > out as exceptions. Otherwise, we focus 90% of our support on just Word
    > and Excel and it pays off nicely.
    >
    > If we switch to putting full Office 2007 on all PCs then there may be a
    > better approach that include other tools than ZfD, such as the fact that
    > we replace 1/3 of all PCs in the organization each year (so that no
    > hardware is more than 3 years "behind"). We could put 1/3 of all Office
    > 2007 installs into the new PC image. But we still need to support all
    > the use of the apps after the install, so ZfD MUST work well, it simply
    > MUST work well or we're screwed, to use the vernacular. Also, just
    > switching from what we've been doing for years -- single app orientation
    > -- means introducing new-ish issues that have to discover and explain to
    > our comrades, and to adjust our orientation with unknown future costs.
    >
    > But that may end up being the simplest adequate solution. And that's
    > what I want.
    >
    > -K
    >
    > grimlock;1883526 Wrote:
    >> Craig Wilson wrote:
    >> > You should really focus on #1.
    >> > Snapshot is not the way to go.
    >> >
    >> > Details about what is Not working or what random behavior may help
    >> folks.
    >> > Ask in the MS forums may help too. dont' mention zenworks.
    >> > Just say you are installing as Administrator from a share and getting
    >> these
    >> > errors.
    >> >
    >> > While not 100% accurate, it should be good enough to get some good
    >> feedback.
    >> >
    >>
    >> Nor is installing 1 app at a time. Install the whole suite, have an
    >> icon for each app that runs the exe for that app with a dependency on
    >> the another app that points to the installer msi.
    >>
    >> If any user runs any app, it will run if the executable is there
    >> (meaning it's been installed). If the executable is not there then it
    >> calls the dependent application (the installer app) and installs it,
    >> and
    >> then runs it.
    >
    >
    > --
    > KentFSmith
    > ------------------------------------------------------------------------
    > KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
    > View this thread: http://forums.novell.com/showthread.php?t=391573
    >
    >

  • How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

    How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Identity Server has not been configured for this new user/group suffix

    Hi all
    I am having a problem trying to configure the Directory Server (5.2) for Messaging Server.
    My configuration is as follows:
    SJES Q12005
    Server 1 - Directory Server 5.2
    Server 1 - Access Manager (formerly Identity Server)
    Server 1 - Web Server 6.1
    I have successfully installed the above and can login to Access Manager.
    I next installed Calendar & Messengar Server on "Server 1". Upon running "comm_dssetup.pl" from /opt/SUNWcomds/sbin, I get the following error:
    "Identity Server has not been configured for this new user/group suffix"
    Copy and paste of what I entered:
    bash-2.05# perl comm_dssetup.pl
    Welcome to the Directory Server preparation tool for
    Sun Java(tm) System communication services.
    (Version 6.3 Revision 1.0)
    This tool prepares your directory server for use by the
    communications services which include Messaging, Calendar and their components.
    The logfile is /var/tmp/dssetup_20050830165940.log.
    Do you want to continue [y]:
    Please enter the full path to the directory where the Sun ONE
    Directory Server was installed.
    Directory server root [var/opt/mps/serverroot] : /opt/mps/serverroot
    Please select a directory server instance from the following list:
    [1] slapd-sunldap
    Which instance do you want [1]:
    Please enter the directory manager DN [cn=Directory Manager]: cn=DirMan
    Password:
    Detected DS version 5.2
    Will this directory server be used for users/groups [Yes]:
    Please enter the Users/Groups base suffix [dc=samplecompany-dev,dc=co,dc=uk] : ou=infrastructure,o=sampletown,dc=samplecompany-dev,dc=co,dc=uk
    There are 3 possible schema types:
    1 - schema 1 for systems with iMS 5.x data
    1.5 - schema 2 compatibility for systems with iMS 5.x data
    that has been converted with commdirmig
    2 - schema 2 native for systems using Identity Server
    Please enter the Schema Type (1, 1.5, 2) [1]: 2
    Identity Server has not been configured for this new user/group suffix
    You can opt to continue, but you will not be able to use
    features that depend on Identity Server
    Are you sure you want this schema type? [n]:
    I have entered my user group suffix exactly as specified during the Access Manager install (hence I am able to login as "amadmin").
    Looking at the LDAP logs to try and figure out whats going wrong I see its not getting hits on all searches it is performing:
    [30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
    dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
    ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
    Resource)(objectClass=domain))" attrs="dn"
    [30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - RESULT err=4 tag=101 nentries=1 etime=0
    [30/Aug/2005:16:41:18 +0100] conn=299 op=160 msgId=162 - ABANDON targetop=NOTFOUND msgid=161
    [30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - SRCH base="ou=people,ou=infrastructure,o=northampton,dc=dataforce-de
    v,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(objec
    tClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscapeRe
    source)(objectClass=domain))" attrs="dn"
    [30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - RESULT err=0 tag=101 nentries=0 etime=0
    [30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - SRCH base="ou=clientdata,ou=infrastructure,o=northampton,dc=dataforc
    e-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(o
    bjectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netsca
    peResource)(objectClass=domain))" attrs="dn"
    [30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - RESULT err=0 tag=101 nentries=1 etime=0
    [30/Aug/2005:16:41:18 +0100] conn=299 op=163 msgId=165 - ABANDON targetop=NOTFOUND msgid=164
    [30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
    dev,dc=co,dc=uk" scope=1 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
    [30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - RESULT err=0 tag=101 nentries=41 etime=0
    [30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
    dev,dc=co,dc=uk" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
    [30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - RESULT err=0 tag=101 nentries=1 etime=0
    [30/Aug/2005:16:41:28 +0100] conn=299 op=166 msgId=168 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
    dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
    ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
    Resource)(objectClass=domain))" attrs="objectClass numSubordinates ref aci"
    [30/Aug/2005:16:41:29 +0100] conn=299 op=166 msgId=168 - RESULT err=0 tag=101 nentries=41 etime=1
    [30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - SRCH base="ou=iplanetamauthservice,ou=services,ou=infrastructure,o=n
    orthampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectC
    lass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServ
    er)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
    [30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - RESULT err=0 tag=101 nentries=1 etime=0
    [30/Aug/2005:16:41:29 +0100] conn=299 op=168 msgId=170 - ABANDON targetop=NOTFOUND msgid=169
    [30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - SRCH base="ou=iplanetamauthldapservice,ou=services,ou=infrastructure
    ,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(obj
    ectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscape
    Server)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
    [30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - RESULT err=0 tag=101 nentries=1 etime=0
    [30/Aug/2005:16:41:29 +0100] conn=299 op=170 msgId=172 - ABANDON targetop=NOTFOUND msgid=171
    [30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - SRCH base="ou=iplanetampolicyconfigservice,ou=services,ou=infrastruc
    ture,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)
    (objectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=nets
    capeServer)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
    [30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - RESULT err=0 tag=101 nentries=1 etime=0
    [30/Aug/2005:16:41:29 +0100] conn=299 op=172 msgId=174 - ABANDON targetop=NOTFOUND msgid=173
    [30/Aug/2005:16:41:29 +0100] conn=299 op=173 msgId=175 - SRCH base="ou=iplanetamauthenticationdomainconfigservice,ou=services
    ,ou=infrastructure,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(
    --More--(83%)
    The list goes on.
    Can anyone give me any pointers?
    Thanks

    Hi
    Thanks for your reply!
    I did mis-type, my mistake - sorry about that.
    If I dont over-ride the default it works, I've pretty much got the whole setup working now but I'm not particularly over the moon about the way the ldap tree is setup, I'd like finer granuality as we are going to attempt to get syncronization working with AD.
    I have an idea about how I'd like to set up our Mail/Calendar/LDAP infrastructure the 2nd time around (I'm just testing at the mo) - so I might have a question or two for you if you dont mind taking a look when you have a minute?
    Thanks Jay

Maybe you are looking for