Payload at Adapter for System Errors - SOAP receiver adapter

Hi Everybody,
I am working on an Idoc to SOAP asynchronous scenario.
There are connection issues between SOAP adaper and the target webservice.
I need to capture the Idoc number from the message payload for the Erroneous messages at the adapter for the System errors.
Is there any way of capturing field values from the payload (Say, Idoc number) at the SOAP receiver Adapter level.
Helpful answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hey,
I think you need to implement a module inorder to get the payload at receiver adapter module.
As far i concern you can not directly refer the payload in adapter in receiveer communication channel unless you have your own module, which gets the payload. Check the Modules tab in the communication channel and also regarding how to get the payload for error information, follow the steps mentioned in the below link, which gets the payload in file. hop it will resolve your issue.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/writepayloadtoafilefromAdapter+Module
Regards..
Prasanna..

Similar Messages

SOAP receiver adapter message: PI payload in parameter or body

Hi,
We tried to send messages via the following way to an external partner: SAP --> IDoc > XI (7.1)> HTTP(s) --> external partner.
We tried 2 techniques:
1. using a HTTP receiver communication channel with HTTP destination (using certificate).
As the path prefix in the destination, including parameters, exceeds 256 characters, we had to search for another solution
2. using the SOAP receiver communication channel with a target URL (https string) and indicator 'Do not use SOAP envelope' set
When sending the message, the body of the message, the IDoc XML payload doesn't seem to be read by the partner, probably related to the fact that they do not use the right software to do so, as decribed in forum:
SOAP receiver adapter error (SOAP receiver adapter error.)
Is this the right interpretation and is there no other solution than try to append the payload to the parameterlist ?
Regards,
Jan Macken

The partner found a way to read the body correctly

SOAP receiver adapter for ASCII-7 characterset???

Hi,
Our scenario is Abap Proxy -> XI -> Web Services (SOAP Adapter). Receiver webservice will accept only the characterset of ASCII-7. But Abap Proxy will send only unicode characterset (default).
Any workaround for receiver SOAP adapter to accept ASCII-7 characterset?
Regards,
Prasad U

Hi -
You can set a specific encoding in the soap receiver channel module configuration. From the SOAP Adapter FAQ (Note 856597):
 o Q: What character encoding is supported by the SOAP receiver
 adapter?
 A: The SOAP receiver adapter can use any character encoding
 supported by the local JDK. The request message from the SOAP
 receiver is normally encoded in UTF-8. If you want to change this
 encoding, for instance to iso-8859-1, you can set parameter
 XMBWS.XMLEncoding to iso-8859-1 in the module configuration for
 the SOAP adapter module. This setting is for the outgoing SOAP
 message and has no effect on the incoming SOAP message. For the
 incoming SOAP message, any code page supported by the local JDK
 is accepted.
Check the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79">How to Use the XI 3.0 SOAP Adapter</a> document for an example.
Regards,
Jin

SOAP Receiver adapter error. SOAP CALL Failed

Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed out

Hi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad

SOAP receiver adapter for Axis

Hi,
I used SOAP receiver adapter for Axis like below:
Transport Prorocol : HTTP
Message Protocol : Axis
Url: http://<IP>:<Port>/xxx/WebService/services/Head/yyy
Authentication : Basic
User: <user>
Password: <password>
SOAP Version : 1.1
SOAP Action: : <method>
Encapsulation Format : MIME
Payload Extraction : SOAP Body
When i drive PI message it generates error below.
What must i do to solve this problem?
Thanks.
Error message
com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.axis.modules.AFAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@20715646 for bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: javax.ejb.CreateException: java.lang.NoClassDefFoundError: org/apache/axis/types/URI$MalformedURIException

*Url:* http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest
When i use Url with *?wsdl* it generates below (it'is very long. I give part of it)
wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:intf="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:tns1="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" xmlns:tns2="http://schemas.hp.com/AssetManager/R51/ACMetaData" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:types>
- <schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:AdministrationTypes="http://schemas.hp.com/AssetManager/Custom/Head/Administration/Types" xmlns:CableTypes="http://schemas.hp.com/AssetManager/Custom/Head/Cable/Types" xmlns:CatalogTypes="http://schemas.hp.com/AssetManager/Custom/Head/Catalog/Types" xmlns:ChargebackTypes="http://schemas.hp.com/AssetManager/Custom/Head/Chargeback/Types"
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" />
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" />
- <annotation>
<documentation>Auto-generated schema for AssetCenter web services for Head/SapTest Implementation</documentation>
</annotation>
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SAM/Types" schemaLocation="../../schema/Head/SAM/SAMTypes.xsd" />
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" ......
<wsdl:operation name="retrieveAllBusinessAPIListByName">
<wsdlsoap:operation soapAction="retrieveAllBusinessAPIListByName" />
<wsdl:input name="retrieveAllBusinessAPIListByNameRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveAllBusinessAPIListByNameResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SapTestService">
<wsdl:port binding="impl:SapTestSoapBinding" name="SapTest">
<wsdlsoap:address location="http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

SOAP receiver adapter - payload inside the soap envelop

Hi,
We have to send a SOAP message to 3rd party from PI 7.1. Using SOAP receiver adapter - we are trying to achieve this. 3rd party software is unable to accept payload as an attachment of the main envelop - they want it enside the main envelop.
I tried with "Keep attachment" option - but PI still keping the payload as an attachment. I think this option is for handling "extra" attachment.
Is there any way we can keep the payload inside the envelop?
In run-time WB, at the moment envelop looks like
<SOAP:Envelope xmlns:SOAP="http://schemas....
<SOAP:Body>
<sap:Payload xlink:type="simple" xlink:href="cid:payload-d6518670ca1311debbd9ca347000800b...">
</SOAP:Body>
</SOAP:Envelope>
And the payload d6518670ca1311debbd9ca347000800b... ( again viewed from RWB) - contains the data.
<?xml version="1.0" encoding="UTF-8" ?>
<ns2:Order> ....
</ns2:Order>
Can we insert this payload directly inside the SOAP:Envelope body instead of a link there?
Regards,
Sudhin

Hi!
It seems to me that this 3rd party is expecting only XML not SOAP.
If this is the case, you should use the HTTP Receiver adapter instead of SOAP.
Some systems 'say' they can speak SOAP but they can only speak XML. Not to blame, it's a mistake many make these days.
The only way you use SOAP Receiver adapter with this 3rd party, is that if someone from the 3rd party hands you a WSDL file.
Ricardo Sancio Lóra
Brazil

No SOAP Envelope error in SOAP Receiver Adapter

Hello Friends,
Informaiton:-
I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
Outbound and Inbound service interfaces have Request/Response and Fault messages.
Issue:-
While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK
I also found that Request message is not reaching to the Java Web server.
I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
please suggest.
Thanks & Regards
Jagesh

Hi,
Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
(1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
(2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
(3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
HTTP Protocols in Point 1 (Through PI).
POST HTTP/1.0
Accept: /
Host: 172.24.138.142:4544
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
Content-Type: text/xml; charset=utf-8
Content-Length: 1195
SOAPACTION: "Action1"
HTTP Protocols in Point 2 (Through Altova).
POST / HTTP/1.1
Content-Type: text/xml
User-Agent: XML Spy
SOAPAction: "Action1"
Host: 172.24.138.142:4544
Content-Length: 1195
Connection: Keep-Alive
Cache-Control: no-cache
Thanks to Mr. Stefan Grube for writting such a nice blog.
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Experts, please suggest me further.
Thansk & Regards
Jagesh

Soap Receiver Adapter Error. Pls advice urgent

Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
Regards

Henry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful !

Soap receiver adapter payload with certficate signature

I have a requirement.. where XI calls external webservice using SOAP.
I have configured SOAP receiver adapter, but the webservice wants the certificate authentication.. From XI we sent the certficate to external webservice and then in the comm channel I did activate the 'certficate' check box. It did not work.
For test purpose now they have deactivated the certficate authentication in their end.. it works if they deactivate. It means there is no issue with request structure.. purely the issue is when I use the certficate.
External webservice sent me the copy of the soap request which works for them.. that has security signature inside the payload. ( I have atteched below).
If anybody has done it have an idea how to do it please let me know.
- <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <soapenv:Header>
- <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:BinarySecurityToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="CertId-62149565">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</wsse:BinarySecurityToken>
- <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
- <ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
- <ds:Reference URI="#id-24819136">
- <ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<ds:DigestValue>6Mzpm7P8k3f8UuxbBMP4ZTC83Yc=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>HcqMChOzlHFXTRRAf7kyTSQ5Jd53Yiu7oFLjkh5P3vayo2G4sjFv/qFKHX0E6a5xkBMTIRrW+30t7IdB4X0x35FPO1dTulz37KM1/jpLSGVxnjnWWeFZvseVjJsk5NTPiSE6GAjO7rFW/Vled2djATTmZsIgJCIfhLYVp112Uis=</ds:SignatureValue>
- <ds:KeyInfo Id="KeyId-21369792">
- <wsse:SecurityTokenReference xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="STRId-29015968">
<wsse:Reference URI="#CertId-62149565" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" />
</wsse:SecurityTokenReference>
</ds:KeyInfo>
</ds:Signature>
</wsse:Security>

go through this webinar and follow the steps...It will solve your problem..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1b657d59-0c01-0010-4fa8-f792fa412823
Regards,
Ravi

SOAP Receiver Adapter Target system down

Hi All,
My scenario is SOAP Receiver adapter --- > Portal system (Target system.).
Now team is taking restart of target system. It will take around 1 hr. So my question what will happen to the messages which is received by SOAP Receiver adapter in this time frame. ?

Hi Rajhans ,
All the messages during that period of time will fail with System Error ,We have to re-send these messages manually once the target system is up. In stead of selecting one by one you can set Multiple Selection On option to select the messages in RWB
.Please refer the weblog will give you some idea about the standard reports which can also be used to reprocess the messages.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1051765250DB10924207601714756238End?blog=/pub/wlg/2728
do you have synchronous soap receiver or async?
Regards,
Srinivas

Creating Digital certificates for SOAP Receiver Adapter

Hi
In Visual Admin...> if we go to the "key storage" and try to create the certificates, we have the options of
selecting the below algorithms.
RSA-512,1024
DH -512,1024
DSA-512,1024
But SOAP Receiver Adapter supports only the below encryption algorithms.
3DES
DES
RC2-40
RC2-64
RC2-128
Still if I try to use any of the RSA, DH, DSA algorithms to create the certificates in visual admin and if I
use the same certificate in SOAP Receiver adapter, I am getting the below error in sxmb_moni
com.sap.aii.af.ra.ms.api.DeliveryException: Unsupported keysize or algorithm parameters.
Could you plz advise, is there any provision in XI to create the certificates using the algorithmS 3DES, DES, RC2 ? or We got to import the certificates from third-party which supports 3DES, DES and RC2 ??
Regards
kumar

can't wait further so closing the thread

SOAP Receiver Adapter / Scenario calling WebServices

Hi Experts,
I am trying to call a web service. Configured a SOAP Receiver adapter. Message to Web Service goes fine but not shown with Checkered flag, but with icon with description "Log Version".
In response message for the request Error Category - MAPPING and Error ID "Cannot Read Payload".
Any ideas to clear this problem. I do have response mapping assigned to Message Interface. Message Interface is Synchronous.
Thanks in advance for any solutions.

can you verify that you are getting a response..try re-routing that to tcpgw and check if content is in line with expected response.
Regards
Ravi Raman

Soap Receiver Adapter - No Response Message

Hi, I've got the following scenario: Idoc - XI - Webservice. I've imported the WSDL from the .NET webservice and used the input and output messages in a syncronous interface. I've setup a SOAP Receiver adapter with the Webservice details. Everything is working fine when I call the webservice and the data is received 100% at the target system, but I am not getting ANY response back on XI.
RECEIVER SOAP ADAPTER Audit LOG:
2008-01-24 16:41:57 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-01-24 16:41:57 Success MP_LEAVE1
2008-01-24 16:41:57 Success The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
2008-01-24 16:41:57 Success Acknowledgement creation triggered for type: AckNotSupported
2008-01-24 16:41:57 Success SOAP: completed the processing
2008-01-24 16:41:57 Success SOAP: continuing to response message 83638fb0-ca8a-11dc-b36c-00145eed9500
2008-01-24 16:41:57 Success SOAP: sending a delivery ack ...
2008-01-24 16:41:57 Success SOAP: sent a delivery ack
2008-01-24 16:41:57 Success The message status set to DLVD.
2008-01-24 16:41:57 Success Acknowledgement sent successfully for type: AckNotSupported
Has it got anything to do with the "AckNotSupported" type? Is "AckNotSupported" the default setting for the receiver SOAP adapter? If so, where do I change this setting?
When I call the webservice with the exact same input using a standalone tool, I get the response message back 100%. Any help will be appreciated.
Thanks
Rudi

Hey
you are confusing between a response and an acknowledgement.
response and acknowledgement and not one and the same thing.
response is basically used when you send some query to the receiver system and expect a set of value(s) for your query.for e.g sending a query to a Database(JDBC) or SAP system(RFC)
and acknowledgement is just a notification that the message was receiver by the receiver correctly,it does not returns you a set of value(s).
now coming to your question,ALEAUDIT IDOC is generated when an IDOC is posted,since in your case you are not posting and IDOC,instead your are sending it ,i m not sure if ALEAUDIT will be generated or not,one thing that will come to your rescue is that every receiver SOAP adapter expects a HTTP response(irrespective of you explicitly asking it or not).
a HTTP 200 means that messages were posted successfully,and HTTP 500 means application error,get this HTTP response and send it back to the SAP system,most probably you would need to use BPM for this.
Thanx
Aamir
Edited by: Aamir Suhail on Jan 24, 2008 11:26 AM

Soap receiver adapter exception

Hi,
I am using SOAP receiver adapter to access a web service that is hosted on SAP Web AS (in this case it is the integration server Web AS). I use the web services navigator to test the web service and the web service works fine. The name of the web service is 'RemoteCrossReferenceProcessor' and it has one operation 'crossReference'.
But with the soap adapter, I am getting OperationNotFoundException in the logs and my web service is not getting accessed. Here is the server log:
An error occurred while processing the message security. Reason: . See trace entry .#3#com.sap.engine.interfaces.webservices.runtime.OperationNotFoundException#Found 0 operation definitions using keys: Key name:'first-body-element-ns' key value:'urn:RemoteCrossReferenceProcessor'; Key name:'SoapRequestWrapper' key value:'crossReference'; #[no trace for com.sap.security.core.server.ws.service.ServerSecurityProtocol (severity above PATH)]#
#1.5#0003BA0FF9EA0022000000840000688D0003F9349A3C2D61#1118429251382#com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer##com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer.onMessage(QueueMessage)######b40aca80d9be11d994360003ba0ff9ea#SAPEngine_System_Thread[impl:5]_47##0#0#Error##Java###Transmitting the message to endpoint using connection failed, due to: .#3#AFW#com.sap.aii.af.ra.ms.api.RecoverableException: NO_BACK_SYSTEM_IN_HOPLIST:#http://sapsand1:8000/sap/xi/engine?type=entry#
Here is adapter configuration:
Transport Protocol:HTTP
Message Protocol:SOAP 1.1
Adapter Engine:Integration Engine
Target URL: http://<server_name>>:50000/RemoteCrossReferenceProcessor/Config?style=document
User:
Password:
Default SOAP Action:
I imported the WSDL into the external definition and used the messages from the WSDL for defining my interface mappings.
I am using XI 3.0 SR1 (SP 09).
I am out of ideas as to why the SOAP adapter is not calling my web service. Please help me with your suggestions.
Thanks and Regards.

HI Dani,
I was looking for this error and I found this post AXIS SOAP Receiver. This post says about other errors, but sugests many ideas to found the soluction, like:
1- non-deployed all AXIS jars; (but in this case it deployed all)
2- Exists this note for one erro in AXIS: (https://service.sap.com/sap/support/notes/1028961).
3- this document (http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f) that have sets for header parameters. This is interesting becouse one of this parameters is obligatory but isn't filled, can occur error like "null object".
By the way, you can check if have update to AXIS (http://ws.apache.org/axis/), becouse isn't a SAP application and in other systems can have this error.
I hope this helps,
Romerito Silva

Issue while passing Target URL dynamically in SOAP Receiver Adapter

Experts,
I am stuck with an issue while passing the Target URL dynamically.
The UDF required for this works just fine. I can see the Target URL in Dynamic Configuration header(The Key is TServerLocation) in SXMB_MONI but the request that I am sending is not reaching the web service.
Some posts have suggested to hard code the Target URL as http://.
Below is the error that I am getting when I hard the Target URL as http://:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>RecoverableException</code>
 <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
 at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
 at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
 at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
 at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>
</SOAP:Envelope>
When I hard code the Target URL as Test (any dummy value), the error that I get is different. (Detailed error shown below)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>RecoverableException</code>
 <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: no scheme
 at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
 at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
 at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
 at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>
</SOAP:Envelope>
I've referred the post [Dynamic URL for SOAP receiver adapter;.
I am on PI 7.0.
Any help in this regard is highly appreciated.
Best Regards,
Vijay

Issue resolved... by doing this:
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TAuthKey");
conf.put (key2, "username");
In the advanced tab of the communication channel, set the flag "View Authorization keys", and then added "username" (user to access the dynamic target url) and the password (2 times).
That's it...

Payload at Adapter for System Errors - SOAP receiver adapter

Similar Messages

Maybe you are looking for