Payload different in SXMB_MONI and Message Monitoring

Hi All,
I am facing a problem. My message Payload in SXMB_MONI (after mapping) is different from what i got from Message Monitoring tab of RWB. In the message monitoring some entries are missing from my actual payload.
Payload from SXMB_MONI contains 300 entries
payload from Message monitoring contains 250 entries.
I am not using any module processor. Any pointer on "Why message payload got changed in RWB. ??
Thanks
Ajay

Hi Nallam,
The structure is simple like 300 nodes for items after mapping and these are to be inserted in to SAP tables using RFC. But in the Adapter engine enteries found were 250.
The same message when sent again worked fine but we have to find the root cause of the error.
Thanks
Ajay

Similar Messages

XML Monitor time (sxmb_moni) and Message Monitoring (rwb) not same.

Hi,
I have changes the TIME ZONE using STZAC but then the xml monitoring time log still doesn't match with the system and java engine time.
Please help.
Thank you and Regards
Fernand

Hi
Follow this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3cced290-0201-0010-99bc-ff88c32a4495
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Regards,
Santosh.

Automating Communication channel and message monitoring

Hi,
Right now i am trying to automate communication channel monitoring and message monitoring for SAP PI. Kingly suggest me how can I go ahead and which language I can use(java or dot net) ?. I will be needing to generate a report for every half an hour about the status of the communication channel and for successfull and failed messages. Kindly assist on what criteria I can use.
Kindly help on this.
Thanks and regards
Nagaraj

Hi
As far as i know there is not easy way to acheive it by calling some webservice or chacking DB table. I developed some tool in .net by calling direct webpage using HTTPRequest class
Regards
Maciej

No message in runtime work bench and message monitoring

hi all,
we have done one simple file to file scenario.file is not being picked up.
there is no message in sxmb_moni and runtime workbench.
In communication channel monitoring also we r not getting any adapter.
(XI installed recently).
Is there any problem with installation?
Please let me know.
Thanks,
sreedhar.

Hi,
Please check if your Adapter Engine is working fine
Please can you look at this thread. The same issue is resolved here
Unable to find an associated SLD element
Also see if your SLDCHECK is fine?
No Adpater Engine available in Communication Channel creation
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Also check as per below steps
0) Go to RWB-->Cache Connectivity Test and check the status.. and run the refresh over there
1) execute SLDCHECK in XI box
2) Go to SXI_CACHE and refresh the cache also delete the Adapter metadata
3) Check the SAP BASIS SWCV is imported into IntegratioN Repository
4) Refersh the Adapter Metadata cache in SLD>Adminisration>Cache Overview ->Adapter Metadata Cache Refresh
this doc may help u :https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39fe8fa0446
thanks
Swarup

Premiere Pro CC 2014.1 - end of media indicators different in source and program monitors???

Here are two screen grabs showing the right edges of the source and program monitors in PPCC 2014.1. Does anyone know why the end of media indicators are so different? Left is source monitor, right is program monitor.

Those are actually different indicators. The one on the left is the end of media indicator, which lets you know there are no more frames in the source clip. The one on the right is commonly known as the end of sequence indicator, which can also get to in the Source Monitor if you play a clip to the end and then hit Right Arrow.
Both indicators are controlled by the same option in the Overlay Settings dialog: End of Media/Sequence Indicators.

Windows can not manage to have different DPI 1080p and 4K monitor

Windows can not manage to have different DPI 1080p and 4K screen. However, it is impossible not to have a magnification of 1080p but 25-35% on Dell 4K (P2715Q) intimidate. Windows 8.1 increases on both screens. I have clicked out that it will not change
on both screens, and only on 4K Dell P2715Q.
I have Nvidia GTX 680 and latest drivers 347.88! Windows is 8.1 Pro with Mediacenter.

Hi,
Agree with you, quote from “Windows 8.1 DPI Scaling Enhancements” Windows blog.
“here have been some questions about when per-display DPI scaling is used (different DPI scaling values per display) and I wanted to add a note here to clarify. On Windows 8.1 when you have the “Let me choose one scaling level for all
my displays” check box checked (not checked by default) one uniform DPI scaling value is used for all displays.”
http://blogs.windows.com/bloggingwindows/2013/07/15/windows-8-1-dpi-scaling-enhancements/
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Steps for SXMB_MONI error message monitoring in CEN

Hi All,
I am not able to see the Exchange Infrastructure Monitor Template in RZ20! I have seen the same in PI7 and CEN (Solution Manager) system as well. The Central System monitoring for PI system is configured and working fine!
Please help as I want to monitor the SXMB_MONI messages on The CEN System!
Thanks in Advance!
Antarpreet

Hi Nallam,
The structure is simple like 300 nodes for items after mapping and these are to be inserted in to SAP tables using RFC. But in the Adapter engine enteries found were 250.
The same message when sent again worked fine but we have to find the root cause of the error.
Thanks
Ajay

Regarding Message Monitoring

Hi All ,
Whats the differance between Message Monitoring using SXMB_MONI and Message Monitoring in RWB .
Whats the use of Transaction Code SXI_MONITOR .
Thnaks ,
hem.

Hi Hem,
As per the answers u have got from the above i want to add few points...
RWB---> it is the place where you can monitor the complete message flow. From the time it is picked to the time it is posted. Added to it u have the provision of Channel Monitoring,performance monitoring where you can check the performance(time to execute),End to End Monitoring etc... This really helps in debugging the problems.
where as is in Sxmb_moni you can just see the messages generated in the integration server. messages generated in the adapter engine cannot be viewed in SXMB_MONI or SXI_MONITOR.
you can view the same dynpro as in SXMB_MONI in the RWB.
Regards
Gopi

An Attachement for the payload of the message monitoring.

Hello ,
From the forum links, I found that to access a message payload for the message monitoring, we need to call cl_xms_persist->read_msg_all.
and the export parameter would give the payload message as an attachment.

But when I tried to find if there is any attachment with the messages I dont see them (size comes with the value 0).
 CALL METHOD ex_message->numberofattachments
 RECEIVING
 size = size.

Is there any other option available to get a payload for the message?
Thanks a lot.

Hi Arjun,
 You can see your payload in Tcode SXMB_MONI
 SXMB_MONI-->
 MONITOR FOR PROCESSED XML MESSAGES-->
 click F8 (if required change the date of execution from to select specific message on date range)-->
 Double click on the right most 3D button type of box before the flag icon,
Now you will be able to see the Different pipeline Execution steps(7 Steps) that Your message has under gone .Click on any one of them and see your payload in payload folder at each and every step.This helps us in understanding the way your message is undergoing transformations through out its journey from sender to receiver.
VIRTUAL RECIVER..Is actually a part of an annonymous and adressable unit like service to simulate the receiver that is participating in B2B communication.Its jus a mandatory parameter that has to be mntione din Receiver deternination when We test our B2B scenarios using this option in ID part of PI/XI.
Thanks,
Ram.

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

No payload in message monitoring of PI7.3

Hi experts,
i am doing webservice -PI-webservice synchronous scenario.i am testing thru WS navigator.i am getting response xml also corretly.but problem is message monitoring.i am unable to see payload for both sender and reciever .it is giving no payload.
i dont know..any option for viewing payload.i did nt check any thing in sender communication channel (soap).need help on this.
how to check the payload for soap to soap in monitoring (only java stack of PI7.3) .

Hi
have done some R&D on help.sap.com ..came to know user need some roles for to view payload ..
http://help.sap.com/saphelp_nw73/helpdata/en/48/b2dfee6b156ff4e10000000a42189b/frameset.htm
Thanks,
Allamudi Loordh.

No authorization to view payload in auditLog Of Message Monitoring in RWB

Hello,
I am not able to view the message payload in the audit Log In Message Monitoring in RWB.
It says no authorization.
Can anybody tell me what authorization object is required for this?
Thanks,
Loveena

Hello,
Check the link below:
community/pi-and-soa-middleware/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
The configuration consist to set a parameter on NWA. Check the following step:
1. Go to <host>:<port>/nwa;
2. Go to Configuration Management and then Infrastructure;
3. Java System Properties;
4. Click on services tab and then search for XPI Service: Messaging System;
5. Search for messaging.syncMessageRemover.removeBody on parameters tab and modify from true to false. False value should be displayed in the custom value column.
After that, you'll be able to see the payload in RWB.
Regards,
Arthur Silva

What is the difference between Message Monitoring and End-to-End monitoring

Hi experts,what is the difference between Message Monitoring and End-to-End monitoring? and What is the difference between Value Mapping and Fix value?
Thanks,
Manoj

HII
You use message monitoring in the following cases:
● To track the status of messages
● To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
● If you want to monitor message processing steps in a number of SAP components (to be configured).
● If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
also refer this doc...gives more insight on various monitoring:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
... End-to-end monitoring in SAP XI provides a graphical overview of the different XI
components and the message flow between them. It is based on the Process Monitoring Infrastructure (PMI).
ans also
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.

My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

Use different email address (gmail?) just for FaceTime and Messages.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

HT204053 I recently had to cancel my debit card because of unauthorized purchases on Facebook. I have tried to update with 4 different credit cards and every time I get a message saying invalid security code. How do I fix this?

I recently had to cancel my debit card because of unauthorized purchases on Facebook. I have tried to update with 4 different credit cards and every time I get a message saying invalid security code. How do I fix this?

Debit card? Are you sure?
USA iTunes Store does not appear to accept debit cards - http://www.apple.com/legal/itunes/us/terms.html "The iTunes Store, Mac App Store, App Store, and iBookstore services (“Services”) accept these forms of payment: credit cards issued by U.S. banks, payments through your PayPal account, iTunes Cards, iTunes Store Gift Certificates, Content Codes, and Allowance Account balances."

Payload different in SXMB_MONI and Message Monitoring

Similar Messages

Maybe you are looking for