Payload in MDT

Hi,
I could not see my payload in my MDT
Monitoring SOAP Message Payload
I was going thro Michal's Answer in the above link,
to see the payload in MDT I have to add
messaging.syncMessageRemover.removeBody = false
in Messaging System in visual admin
then you will see the payload "
But I could not find "Messaging System in Visual Administrator---->Cluster-->Services---->
My path is right ? if not pls let me know how can I add in messaging system in visual admin
thanks
manian

Hi Manian,
As Gaurav said, you should check for SAP XI AF Messaging System in your visual admin :
For some more details on the parameter settings :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Thanks,
Pooja

Similar Messages

No Payload in the soap receiver call adapter ?

Hi Guys,
configured Proxy-SOAP Asynchronus process and in the sxmb_moni, i am unable to see the payload under call adapter in sxmb_moni, but i am able to see the payload under RWB in MDT. The message is checked successful in monitor.
I am not understanding why i am unable to see the payload under call adapter in sxmb_moni. I am not getting the data into my receiver system.
Do i need to mention the QOS as EO in the soap url in the soap receiver adapter configuration ?
any help would be really appreciated
Thanks,
srini

Hi,
You can only see the Payload(both with and without transformation) in MONI. message that is handling by adapter can only seen in Adapter Framework using RWB-Message Monitoring or using Communication Channel Monitoring.
Regards,
Farooq.

Rewards points if you find it usefull.

Problem in Edit Message Payload in AE

Hi all,
actually we have a problem with editing the message payload of a failed message in the adapter engine.
Messages Editor shows "The version you want to edit is locked"
Log in NWA shows "EditorDynPage: loadMessage()
Thrown:
com.sap.aii.mdt.api.exceptions.OperationFailedException: VersionAlreadyLockedException in Method: AdapterFrameworkMonitoringBean: getTransferMessage( Query ). The version you want to edit is locked. Message: Version 1 of message 4eb86ecc-fb6b-0c10-e100-80000a93147c(INBOUND) is already locked for editing.; To-String: com.sap.engine.interfaces.messaging.api.version.VersionAlreadyLockedException: Version 1 of message 4eb86ecc-fb6b-0c10-e100-80000a93147c(INBOUND) is already locked for editing."
How to delet te lock, the nwa => problem management => locks shows no locks?
regards Ralf

Hi,
In NWS, you should also have a tab "Database Locks". See detail in this [SAP help|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/b2e0156b156ff4e10000000a42189b/content.htm].
regards.
Mickael

Errors in Message Display Tool (MDT) in Message Monitoring view of RWB

Hi mates,
Issue #1
When I select the message processed by an Adapter engine and click on 'Details' button, MDT window pops up and has three tabs. When I click on the tab 'Message Content' (which normally shows SOAP envelope and actuall payload) I get an error 'Content of message deleted to save memory'. I can see the content in other two tabs, Message Data and Audit Log properly though.
Whats wrong/missing? Plz clarify.
Issue #2
When I select the message processed by an Integration engine and click on 'Details' button, MDT window pops up and has four tabs.
When I click the the tab 'Message Content', I get cpl of warning messages 'SSO logon not possible; logon tickets not activated on the server' & 'No switch made to HTTPS; so it is unsafe to send your password'.
It gives someother info 'Choose "Log on" to continue A dialog box appears, where you can enter your user and password' When I click 'log on' and key in user credentials, it doesnot accept the correct values and after repeated attempts it says 'Either client, name, or password is incorrect; repeat logon' and doesnt show any payload.
Whats wrong/missing? Plz help me out.
I appreciate your inputs.
thx in adv
praveen

Gil,
Take a look at this thread. Should solve your problem,
Monitoring SOAP Message Payload
Regards,
Bhavesh

Monitoring SOAP Message Payload

Hi,
Can we monitor the message payload after the message is processed by the adapter? If so, where?
I am doing a HTTP to SOAP scenario. I would want to check if the outgoing payload (after my receiver SOAP adapter finishes processing) is correct. Where can I see this information?
Regards,
Smitha.

hi,
LOGGING_SYNC is not important with MDT
add this to
messaging.syncMessageRemover.removeBody = false
in Messaging System in visual admin
then you will see the payload
Regards,
michal

SXMB_MONI does not show payload after upgrade to SP15

Hi there,
We have installed SP15 in our system, everything seems to be working OK with exception of the SXMB_MONI which now does not show the Payload in the SOAP output/response.
Does anyone know if this is a know bug/functionality of SP15?
Thanks,
Roberto

The other OSS note:
SAP Note Number: 917885
XI: Attachments werden im Message-Monitoring nicht angezeigt
Version: 1, Note Language: EN, Released on: 01/27/2006
Symptom
An XML message contains attachments with mime types different from application/xml. When clicking on the attachments in Message-Monitoring for that message, the attachments cannot be displayed!
Error message is: "Format of the document cannot be displayed"
Other terms
SXI_MONITOR, SXMB_MONI, Runtime Workbench, XI, RWB, Message Display Tool, MDT
Reason and Prerequisites
Before displaying an attachment, Message Monitoring checks the mime type of the message with a list of supported types. Since there are several mime types for some applications, like powerpoint or excel, the check is not exhaustive.
Solution
The attached correction instruction adds additional mimetypes for powerpoint, excel, and word. The patch is included in SP17 for NW04 and SP7 for NW04s.
Actually both of these notes don't exactly indicate that the issue will be fixed in terms of the payload. We are going to apply it and see if it fixes the issue. I will update this forum when i try it out.
Regards,
Jay

Error on RWB-MDT

Hi All,
Our XI system was upgraded from sp 10 TO 15. All the Interfaces/Scenarios are working fine. But in RWB->MDT, I clicked at the Message Content and Queue Monitor, the error below is displayed. Due to this I am not able to see the message details/payloads. Please suggest.
"Error in the ICF node
To log on, specific ICF nodes must be activated in transaction SICF
Check the following ICF nodes, as described in note 517484:
/sap/public/bc
/sap/public/bc/ur"
Thanks,
kanan

Hi Prateek,
Just wanted to confirm one thing- actually on checking the services - /sap/public/bc was activated already
so should i just activate this under this - /sap/public/bc/ur
kanan

Filename in Attachement payload

Hy,
I have to detach an email attachement on my file System.
That's works but I'm not able to maintain the same filename.
Can anybody help me.
Thanks
Mat

Hi Mattia,
If your file name is a part of your email atttachment ( the payload ), then you can dynamically create your file name.
To do this,in the filename of the receiver file adapter, give the filename a %var%.
Anything between % is treated as a varibale by XI. Now, under variable name substitution, you will have to give the value of var and this will act as the filename.
You can access the payload using payload: and the XPATH.
For info on how to do this, check the topic VARIABLE SUBSTITUTION in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
hope this helps,
Regards,
Bhavesh

Filename in payload

Hello experts,
Is there anyway I can get filename and populate in the payload so I can see it as an additional tag in SXMB_MONI? This is from sender file adapter that I want to capture file name. If possible, I would also like to populate interface name, message ID in the payload in SXMB_MONI. I have read Dynamic Configuration blogs but that brings the filename in the Dynamic Configuration but I would like to get them in payload.
Thanks,
John

John,
I think, this it is possible by implementing
1. Java Mapping
2. UDF
Please refer this help link which clearly explains how to access message id, interface name etc.
[http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm]
Regards
Ramesh

Error while assigning Payload to container variable, Activate SXI_Cache

Hi experts,
I have a BPM-Szenario. There is a ContainerOperation where I want to fill a Container Variable with a Payload variable. Unfourtunately I get an error in TA sxi_cache: "The value of expression "&.....&" cannot serve as the source of an Assignment.
My question is, is it really unpossible to do this?
By the way: After them my bpm in sxi_cache is blocked. Also if i delete the container operation it is a lot of luck to activate my bpm.
My actions to activate the BPM are:
IR - F7 = all is ok
ID - Delete IP and Create the IP new
SLD-Cache - Activate in IR and ID
SXI_Cache - Delta and Full Cache Refresh
TA SWWL - There are no error work items
All actions do have no influence to the sxi_cache.
Are there any ideas from the experts?
Best
Mathias

Hello Mathias,
How do you assign the container varaible? Are you sure, that your XPath-expression is correct? Is your target container a simple typed container?
Best regards
Joachim

For %TaskSequenceID% no longer working in MDT 2013.

I've used the blogs by Michael Niehaus to get MDT 2010 and MDT 2012 LTI deployment wizard application selection profiles working.
I'm now running MDT 2013 and when following the instructions here:
http://blogs.technet.com/b/mniehaus/archive/2012/09/04/revisiting-lti-deployment-wizard-application-selection-profiles.aspx, the MDT Wizard Displays the error: "No task sequences are available (TaskSequences.xml does not exist, is empty, or is inaccessible)."

Updating the deployment share seems to have resolved the issue.

MDT 2012 deploy OS from USB external drive failed - need to unplug and plug it once again

We are using MDT 2012 and deploying Windows 7 using media (USB external hard drive). We can successfully deploy Windows 7 32 bit using this method but there is a problem with deploying Windows 7 64bit. This problem appears only on HP EliteBook 840. We can
boot into WinPE 64 bit and can start proper task sequence, all image is applied then after restart, before logon screen appears there is an error saying that cannot find litetouch.vbs script. After clicking ok, I can logon to Windows and there is no usb external
drive recognized. But when I unplug and plug usb drive once again it is recognized by Windows and can be used. I can see that Windows install some drivers just after plug it again
I checked BIOS looking for some USB power options - there is no such settings. And 32 bit deployment works ok. So this is not a case. Looks for me like a problem with proper usb drivers for 64 bit. I download all drivers from HP website (driver pack and
drivers only for USB 3.0). We are using make and model matching in MDT - works ok for all the rest hardware models. Any idea how to troubleshoot it?

Not sure what's going on here. Is this a USB "Flash" drive or a USB "Hard Drive". There *Is* a distinction.
I *thought* that MDT would copy itself to the c:\minint\scripts folder to continue installation.
Next time, when you see this error, Press Shift-F10 to get into a cmd.exe prompt. Can you find litetouch.vbs on any of the drives? Does the USB Drive appear?
IF in fact, the USB Drive is not appearing after the 1st reboot, then you have a problem. Why did the USB 3.0 driver not install. Check the Driver Installation Logs to verify.
Keith Garner - keithga.wordpress.com

Dynamic file name from input payload (RFC 2 flat file)

Hi,
I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
What can I do?

Hi Marshal,
You can add a extra node to your target strucutre like
FileName- Node
--FileName - Element.
do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this field path at Refrence in variable subtituion.
In the Content converison add the Name & Values as below
FileName.fileldNames -- FileName
FileName.fieldFixedLengths -- 0
FileName.fixedLengthTooShortHandling -- Cut
So the extra field in u r target structure would not populate in u r target text file.
Cheers
Veera

Setting the JMS Header from Payload

Hi Experts,
My requirement is to send the payment data coming from ECC to non sap system.Sender adapter is proxy and receiver is JMS.ECC will be sending the filename in one field and payload content as a string in another field.PI has to set the filename coming from ECC in JMS header property.What configuration changes should i need to make in JMS adapter to achieve it?
Converting the XML to string is possible in PI.But my question is converting the string XML data into XML fields is possible in SAP PI?If so how to do that?
Please provide your suggestion.
Regards,
Karthiga

Hi Karthiga,
The UDF is there in blog
DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get("DynamicConfiguration");
            DynamicConfigurationKey dynamicconfigurationkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS", "DCJMSMessageProperty0");
            String s = dynamicconfiguration.get(dynamicconfigurationkey);
            CorrID.append(s);
Please let me know if you have any issue.
regards,
Harish

File Receiver - Dynamically create filename from data in payload

Hi there.
Can anyone tell me the approach I need to take to be able to use the data in one field to determine the filename in the file receiver adaptor.
I have a requirement that requires that I save a file with the following mask:
xxxx_xxx<date extracted from field in payload>.csv
I would appreciate any help on this.
Thanks in advance.
Mick.

Hi Mick,
you just need to use adapter specific parameters
and you will be able to set the name in your mapping
(from your payload)
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Payload in MDT

Similar Messages

Maybe you are looking for