Payload optimization

hi,
I am using CUCM9.x and ICM 9.0. CVP 8.5. I am trying to use dfferent payload size for g729 codec for a remote agent. I have my Ingress of call at my core location and over WAN with g729 codec transport my call to remote agent. by Default when i use 20ms as payload for g729 it works fine, but when i try to use the other sizes i,e. 30ms, 40ms, 50ms, 60ms I am unable to see any change. I am trying to see the statistics from IP Phone.
Can anyone give some insights why this is happenning.
Thanks in advance.

925280 wrote:
When I browse my intranet site, I receive this error: The Payload start tag on line 80 does not match the end tag of "SearchFor. Line 82, position 506. I thought it was a coding error. Put when I sent the error to the vendor, they responded with you need to maximize your oracle table settings.posted "errors" are *NOT* Oracle errors.
I have no idea what is meant by "maximize your oracle table settings". Please clarify.

Similar Messages

Java.lang.OutOfMemoryError: allocLargeObjectOrArray error for large payload

Our is an outbound flow where one FTP adapter picks the files and it calls a requester service, requester service calls the EBS and EBS calls the provider service, and finally file is getting written using the B2B.
Since last 4/5 days we are getting java.lang.OutOfMemoryError: allocLargeObjectOrArray.
We are getting this error when large payloads are being used for doing testing.
As per our understanding, when you have a tree of composite invocations (so A invokes B invokes C invokes D via flowN 100 times), none of the memory is released until they all complete.
1. Could you please let us know exactly when memory is released?
2. How to tune/optimize this?
Our flow is like:
SyncDisbursePaymentGetFtpAdapter --> CreateDisbursedPaymentEbizReqABCSImp l--> SyncDisbursePaymentRBTTEBS --> SyncDisbursedPaymentJPMC_CHKProvABCSImpl--> AIAB2BInterface --> Oracle B2B
<Dec 12, 2012 8:17:06 PM EST> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnecti\
onImpl.invoke(Ljavax.management.ObjectName;Ljava.lang.String;Ljava.rmi.MarshalledObject;[Ljava.lang.String;Ljavax.security.auth.Subject;)
javax.management.RuntimeErrorException: java.lang.OutOfMemoryError: allocLargeObjectOrArray: [B, size 667664.
javax.management.RuntimeErrorException: java.lang.OutOfMemoryError: allocLargeObjectOrArray: [B, size 667664
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrow(DefaultMBeanServerInterceptor.java:858)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrowMaybeMBeanException(DefaultMBeanServerInterceptor.java:869)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:838)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
Truncated. see log file for complete stacktrace
Caused By: java.lang.OutOfMemoryError: allocLargeObjectOrArray: [B, size 667664
at java.util.Arrays.copyOf(Arrays.java:2786)
at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:94)
at java.io.ObjectOutputStream$BlockDataOutputStream.drain(ObjectOutputStream.java:1847)
at java.io.ObjectOutputStream$BlockDataOutputStream.setBlockDataMode(ObjectOutputStream.java:1756)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1169)
Truncated. see log file for complete stacktrace
Do any one have any idea how to rectify this error as whole UAT environment has become down because of this issue.

Please find the required info:
1. Operating System--> LINUX
2. JVM (Sun or JRockit)-->JRockit
3. Domain info (production mode enabled?, log levels, number of servers in cluster, number of servers in a machine)-->
a) production mode enabled-->>Production mode is not enabled, we are going to enable it.
b)Log levels---There are many logs b2b, soa, bpel, integration, which log level do I need to do finest(32).
c) number of servers in cluster-->2
d) number of servers in a machine-->1
3. Payload info (size, xml/non-xml?,)
a) size-->more than 1 MB, and upto 25 MB
b)xml/non-xm--> xml
we are trying to do the changes as suggested by you and will update accordingly.

Filename in Attachement payload

Hy,
I have to detach an email attachement on my file System.
That's works but I'm not able to maintain the same filename.
Can anybody help me.
Thanks
Mat

Hi Mattia,
If your file name is a part of your email atttachment ( the payload ), then you can dynamically create your file name.
To do this,in the filename of the receiver file adapter, give the filename a <b>%var%</b>.
Anything between % is treated as a varibale by XI. Now, under variable name substitution, you will have to give the value of var and this will act as the filename.
You can access the payload using <b>payload:</b> and the XPATH.
For info on how to do this, check the topic<b> VARIABLE SUBSTITUTION</b> in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
hope this helps,
Regards,
Bhavesh

Filename in payload

Hello experts,
Is there anyway I can get filename and populate in the payload so I can see it as an additional tag in SXMB_MONI? This is from sender file adapter that I want to capture file name. If possible, I would also like to populate interface name, message ID in the payload in SXMB_MONI. I have read Dynamic Configuration blogs but that brings the filename in the Dynamic Configuration but I would like to get them in payload.
Thanks,
John

John,
I think, this it is possible by implementing
1. Java Mapping
2. UDF
Please refer this help link which clearly explains how to access message id, interface name etc.
[http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm]
Regards
Ramesh

How can I optimize just the video on a project timeline?

Hi everyone,
I've been working on a 1 hour documentary using original non-optimized media, now that I'm approaching the final steps of the edit I would like to optimize all the video in the timeline, but NOT all the footage I have in the events.
I did NOT optimized my media on import: all my events and project are made up of video non-converted, just imported. I did that because I didn't have enough storage to transcode to ProRes the whole 40 hours of footage.
The folders now full of media in Final Cut Events are the "original media" ones.
Now I'll add some title, subtitles and color-correction and I want to be a little more fast. Then I'll step in the "export" zone, and I know it is much better to export from optimized media than from original media, that's why I want a 'ProRes opimized media' project timeline.
Thank you in advance to anyone with advices!

Thank you Tom,
at least I know there is no need I keep on wondering "WHY?"...
This impossibility to transcote footage on timeline seem to me a big downside to this new version... I just have in mind all the options for managing media in FCP 7...
Thank you again,
always read your tips: veru useful!

Error while assigning Payload to container variable, Activate SXI_Cache

Hi experts,
I have a BPM-Szenario. There is a ContainerOperation where I want to fill a Container Variable with a Payload variable. Unfourtunately I get an error in TA sxi_cache: "The value of expression "&.....&" cannot serve as the source of an Assignment.
My question is, is it really unpossible to do this?
By the way: After them my bpm in sxi_cache is blocked. Also if i delete the container operation it is a lot of luck to activate my bpm.
My actions to activate the BPM are:
IR - F7 = all is ok
ID - Delete IP and Create the IP new
SLD-Cache - Activate in IR and ID
SXI_Cache - Delta and Full Cache Refresh
TA SWWL - There are no error work items
All actions do have no influence to the sxi_cache.
Are there any ideas from the experts?
Best
Mathias

Hello Mathias,
How do you assign the container varaible? Are you sure, that your XPath-expression is correct? Is your target container a simple typed container?
Best regards
Joachim

G770 won't boot normally or in safe mode... I suspect it has something to do with the boot optimizer

My Lenovo G770 will not boot in normal or safe mode. I usually escape out of the boot optimizer. Today I let it run and it went to the "starting windows" screen with a brief startup of the windows 7 animation...it freezes for a second, then a quick flash of the bsod, then to the "windows error recovery page" giving me the option of "starting windows normally" or "Launch Startup Repair (recommended)."
Starting Windows Normally eventually brings me back to the same place repeating what I just stated above paragraph.
When I launch the Startup Repair it "Cannot repair this computer automatically".
So I go to view advanced options for system recovery and support.
It brings me to 5 options:
Startup Repair (we already tried this above)
System Restore (unfortunately I didn't create any restore points)
System Image Recovery (unfortunately I haven't created an image to recover)
Windows Memory Diagnostic (no problems found-done several times)
Command Prompt (don't know what I can do here except for remove a bad/corrupted driver which may be the problem, but I don't know the driver name that is associated with the boot optimizer...can anyone tell me this?)
I've tried booting to safe mode in all of its incarnations and I can't even do that..it repeats the same things as stated above...windows 7 animation briefly starts then locks up, flash of bsod, then the windows error recovery page.
I've tried booting to last known good configuration (same thing occurs...brief startup of windows 7 animation, freeze, flash of bsod, then error recovery page.
The only thing that has given me any kind of result was "disabling system restart on system failure." When I do this, the BSOD doesn't flash briefly..it stays. and it gives me the error message page_fault_in_nonpaged_area.
I'm at a loss as to what to do. Not being able to boot into Safe Mode even is really frustrating. Any advice from anyone? can I remove the driver associated with the boot optimizer? If so, what is the name of the driver and where (directory) is it located?

How did you resolve the issue?
I have the exactly same issue.
When I go System Image Recovery -->Select System Image-->Advanced->I can open all the drives [:Local Drive(C , LENOVO(D, Local Disk(E, Boot(X-where i think executable booting is here]. It comes with an Open prompt asking me to enter File Name with a File type: Setup Information.
I don't know which setup information and where to find it on my Drives.
Anyone know how to fix?
I was trying to re-install Win 7 from DVD but it is not executing either.
Can I boot with USB Ubuntu and Install Win 7 from there??? but how?
Need help?

Column optimization in GUI_DOWNLOAD--Exce

Hi Experts,
I am writing an Excel file using GUI_DOWNLOAD function module. Is there any way to do column optimization in Excel file while downloading.
Thanks and regards,
Venkat

Hi,
There is a Complete & Very good documentation by SAP available on this URL. Please read this.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/204d1bb8-489d-2910-d0b5-cdddb3227820
Hope your query get solved.
Thanks and regards,
Ramani N

Dynamic file name from input payload (RFC 2 flat file)

Hi,
I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
What can I do?

Hi Marshal,
You can add a extra node to your target strucutre like
FileName- Node
--FileName - Element.
do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this field path at Refrence in variable subtituion.
In the Content converison add the Name & Values as below
FileName.fileldNames -- FileName
FileName.fieldFixedLengths -- 0
FileName.fixedLengthTooShortHandling -- Cut
So the extra field in u r target structure would not populate in u r target text file.
Cheers
Veera

Setting the JMS Header from Payload

Hi Experts,
My requirement is to send the payment data coming from ECC to non sap system.Sender adapter is proxy and receiver is JMS.ECC will be sending the filename in one field and payload content as a string in another field.PI has to set the filename coming from ECC in JMS header property.What configuration changes should i need to make in JMS adapter to achieve it?
Converting the XML to string is possible in PI.But my question is converting the string XML data into XML fields is possible in SAP PI?If so how to do that?
Please provide your suggestion.
Regards,
Karthiga

Hi Karthiga,
The UDF is there in blog
DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get("DynamicConfiguration");
            DynamicConfigurationKey dynamicconfigurationkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS", "DCJMSMessageProperty0");
            String s = dynamicconfiguration.get(dynamicconfigurationkey);
            CorrID.append(s);
Please let me know if you have any issue.
regards,
Harish

File Receiver - Dynamically create filename from data in payload

Hi there.
Can anyone tell me the approach I need to take to be able to use the data in one field to determine the filename in the file receiver adaptor.
I have a requirement that requires that I save a file with the following mask:
xxxx_xxx<b><date extracted from field in payload></b>.csv
I would appreciate any help on this.
Thanks in advance.
Mick.

Hi Mick,
you just need to use adapter specific parameters
and you will be able to set the name in your mapping
(from your payload)
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Processing the filename in the payload

Hi,
I am getting the filename in the payload, I want to read that file.
How do I achieve this..
Regards,
Varun

Hi,
For Example if we want to get the Input file name & Directory Details into Target message.
Ex:
I/P File name is :::::231004.xml Ftp Serve Path : //xideveloper/Test_XI/PO
O/P File name can be :::Any thing
Input File : 231004.xml
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_TEST_AGCO xmlns:ns0="http://tafe.test.com">
   <Header>
      <NAME>giri</NAME>
   </Header>
</ns0:MT_TEST_AGCO>
Output File : Out.xml
Here in this output we are able to get the Filename & Directory Info in the FileName_1 Field.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_target xmlns:ns0="http://test.com">
- <Header>
<Name_1>giri</Name_1>
<File_Name_1>231004.xml //xideveloper/Test_XI/PO/</File_Name_1>
</Header>
</ns0:MT_target>
You should capture the Source File name & Directory Info into Target Message.
1)     Write One UDF & Map Like Constant(u201Cu201D)---UDF----FileName_1
2)            In Advanced mode check the check box Set Adapter-Specific Attributes
3)     Check the ASMA Parameters in Sender Adapter Alone
4)             No need to check the check box ASMA in the receiver side
UDF Code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//for getting filename
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//for getting directory
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
/similarly for getting filetype, filesize you need to specify in the above code instead of filename or directory/
String FileName = conf.get(key1);
String Directory = conf.get(key2);
String Cat = FileName+ " "+Directory;
//return FileName;
//return Directory;
return Cat;
Regards
Seshagiri

Accessing the filename in the payload

Hii
I want to process the filename (eg:sample.xml) from the payload of the message.
<Message>
      <Method/>
      <Source>sample.xml</Source>
      <Target/>
   </Message>
And use the filename in other scenario.
Regards,
Varun

Hi Varun
Use variable substitution
File name : %FileName%
Enable variable substitution in Receiver File adapter.
Variable name = FileName
Reference = payload:Message,1,Method,1,Source,1
For more info refer
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Thanks
Gaurav

Sender filename in receiver payload without using mapping.

hi Experts,
I have a File to RFC scenario. wherein i need to pass source filename and filepath as parameter to RFC whenever file arrives at source directory.
I am not using IR contents. What could be the simplest way to achieve this.
One way ofcourse is to write an adapter module to generate Receiver payload with the required information.
Can we have even more easier way to achieve this. Can something be done in Content conversion to get the receiver xml payload with filename and filepath?
Regards,
Girish

Hi Girish
You can use IR mapping for a binary source data, but it must be a Java class, not an abap or graphical mapping.
Regards,
Carme.

Filename extension in Payload Swap bean

Hi Experts
I have a scenario Proxy to FTPS , where I have to send an excel attachment. I have used payload swap bean in receiver channel and it is working fine as I am now able to see attachment in final destination folder however since the file name is coming from ECC and we are using dynamic configuration in PI to handle this. excel attachment is missing the extention .xls when it is being triggered from ECC and therefore in FTP folder file is getting generated but with no extention.
I have added the extention .xls (as per the MIME header) in dynamic config and also tried to use concat function to achieve this extention to be added as final name of the file but when I did above adjustments I can see the correct name being generated in Main payload in SAP PI receiver channel monitoring but not in final destination folder, file still looks same as earlier (without any extention) , I believe since I am using payloadswapbean in module whatever I am getting in Mainpayload is being swapped by excel attachment values but not sure why the correct extention is not being shown up at final destination folders.
Please suggest how can I get the correct file name in destination folder with the help of SAP PI, I know I can do this if ECC will add .xls in attachment name.

Hi Mohit,
I have tested the same scenario and it is working with PayloadSwapBean and DynamicConfiguration in the mapping and the file name correctly placed in the target.
Receiver File CC:
Dynamic Configuration:
Target Directory:
If your file name correctly set in dynamic configuration then the target file will be created correctly.
Regards,
Praveen.

Payload optimization

Similar Messages

Maybe you are looking for