Payload variables not working & Profiles stuck on 'Sending'

Hi all,
I've been trying to use Profile Manager to specify user e-mail accounts on Mac devices (eg, MacBooks) but I've been encountering a couple of problems. I've tried searching around and didn't find any answers.
First of all I'm running the latest Mountain Lion Sever. All clients have up-to-date Mountain Lion too.
Problem 1: Payload variables not working
I'd like to automatically setup Gmails on the MacBooks. Now the users' email addresses are already set to their gmail accounts. So all I have to be able to do is use the %email% payload variable as the username when I go set up the (IMAP) mail accounts in the Profile Manager. However, when I download the profile to the device, it does not convert the payload variable; ie, it tries to log into gmail with the username '%email%'. Other payload variables do not work either.
Oddly enough, the payload variables work as they should with iOS devices...
Problem 2: Profiles stuck on 'Sending'
After enrolling the devices, it seems a hit and miss whether the MacBook downloads the correct profiles from the server... Is there a way to force on the MacBook to update/refresh its profiles? Also, when I update profiles within Profile Manager, the changes are pushed to iOS devices fine but not to MacBooks. Those tasks are all stuck on Sending... Logging in, restarting etc. sometimes helps but not always... Is there a reason why?
Thanks in advance.

Same problem here. Some profiles are being sent, some are stuck on the server. I have no idea why this difference.
Any luck solving the issue?

Similar Messages

Payload variables not working

Hi all,
I've been trying to use Profile Manager to specify user e-mail accounts on Mac devices (eg, MacBooks) but I've been encountering a couple of problems. I've tried searching around and didn't find any answers.
First of all I'm running the latest Mountain Lion Sever. All clients have up-to-date Mountain Lion too.
Problem 1: Payload variables not working
I'd like to automatically setup Gmails on the MacBooks. Now the users' email addresses are already set to their gmail accounts. So all I have to be able to do is use the %email% payload variable as the username when I go set up the (IMAP) mail accounts in the Profile Manager. However, when I download the profile to the device, it does not convert the payload variable; ie, it tries to log into gmail with the username '%email%'. Other payload variables do not work either.
Oddly enough, the payload variables work as they should with iOS devices...
Problem 2: Profiles stuck on 'Sending'
After enrolling the devices, it seems a hit and miss whether the MacBook downloads the correct profiles from the server... Is there a way to force on the MacBook to update/refresh its profiles? Also, when I update profiles within Profile Manager, the changes are pushed to iOS devices fine but not to MacBooks. Those tasks are all stuck on Sending... Logging in, restarting etc. sometimes helps but not always... Is there a reason why?
Thanks in advance.
P.S. Sorry I posted in the wrong forum first...

Same problem here. Some profiles are being sent, some are stuck on the server. I have no idea why this difference.
Any luck solving the issue?

(Substitution Variables) not working in "SQL Developer" Environment !!!!!!!

this photo illustrate how that (Substitution Variables) not working in "SQL Developer" Environment :-
http://www.imagehosting.com/show.php/1555180_ddddd.PNG.html
any solve for this problem ?????!!!!!!!!!!

There is a dedicated forum for SQL Developer related questions
SQL Developer
I should admit however, that query you have provided ( with substitution variables) works like a charme in my environment (SQL Developer 1.1.0.23 build 23.64)
Best regards
Maxim

My 'contact' form is not working. When I send a test contact it returns to my adobe email account this: "Contact Form" has a new form submission.

My 'contact' form is not working. When I send a test contact it returns to my adobe email account this:
"Contact Form" has a new form submission.

What exactly is not working ? As you have mentioned form submission notification is received in your email account so form process is working I believe but you want the notifications to go to another email account I think.
Have you added the email address in "Email to" field in form options ? If yes and then also you are not receiving the form , then please provide me the site url and post a screenshot or form with option box open.
Thanks,
Sanjit

ICloud mail not working. I can send but cannot receive. Is the system down?

iCloud mail not working. I can send but cannot receive. Is the system down?

Same here. I can send mails from iCloud.com Webmail, but cannot receive.
A message that you sent could not be delivered to one or more of
its recipients. This is a permanent error. The following address
failed:
"[email protected]":
SMTP error from remote server after RCPT command:
host: mx1.icloud.com.akadns.net
5.1.1 unknown or illegal alias: [email protected]
On iOS 6 device I can't receive, neither send mails.
https://dl.dropbox.com/u/2234051/IMG_0001.PNG
However, if I change to @me.com, everything works fine.

I have a new iPhone 5 version 8.1 - incoming caller ID does not work and I cannot send or receive SMS messages

I have a new iPhone 5 version 8.1 - incoming caller ID does not work and I cannot send or receive SMS messages. ISP says everything is active on their side. I have just upgraded from Samsung with the same phone number and services. Help?

Hi cggturner,
I'm sorry to hear you are having issues with iOS 8.1. If you are still having issues with Caller ID and SMS Messaging, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Messages
Regards,
- Brendnen

BW hierarchy variable not working in Crystal Report 2008

Hi,
I have created BEx 7.0 report which has hierarchy on 0customer object, the report is working fine whith hierarchy variable. I have created Crystal Report by using this query as source. I have followed below link to create grouping to get data through hierarchy variable.
http://wiki.sdn.sap.com/wiki/display/BOBJ/BWHierarchiesinCrystalReports
But report does not work for hierarchy variable and report is blank. When I give filter of child node which has actual data then I get report output. For ex.
Below hierarchy for 0customer
11396
- 737007
- 123456
When I run report for 11396 then no data display but when I run 737007 child node I get report output but with blank group name.
Can anyone came accross this issue. Please guide me . Thanks in advance.

Thanks Ingo for your reply..
The word filter means, I have hierarchy node variable in the BEx report that has become Parameter in CR. When I give hierarchy node variable value of parent node then there is not data display but for the child node I get the data.
For ex. In the info cube there is data for 730707 customer but in the customer hierarchy the parent node of 73707 is 11396. I am giving 11396 in the variable pop screen for hierarchy variable. I do not see any data but for 73707 I get data.
User does not know 73707, he always enter 11396 customer no. and he gets data in BEx query that is source of CR. but crystal report is not showing data for 11396.
One more point I want to tell here, I am saving CR at my local system not to SAP BW server.
Hope this clear my issue.
Harish Swami
Edited by: hswami27 on Jan 31, 2011 8:17 PM

Row Level Security - Data filter - Roles Variable Not working in OBIEE 11.1.1.7.1

Hi all,
Previously, we were using OBIEE 11.1.1.5.0 and we were able to assign users to application roles by using the initialization block to assign the ROLES session variables.
1. My USER_SECURITY table in Oracle database:
USER_NAME | USER_ID | ROL
user1       | 1723    | GobalDataRole
user2       | 1739    | GobalDataRole
user3      | 1743    | GobalDataRole
2. The SQL query in my session initialization block:
select USER_NAME, USER_ID, ROL
from USER_SECURITY
where USERNAME = ':USER'
3. The row-wise initialization option is not checked.
4. In the Oracle Enterprise Manager Fusion Middleware Control, we created new application role: GobalDataRole and sync with rpd.
5. The GobalDataRole is used in the RPD to filter the data under permissions --> data filter. GobalDataRole only has access to Country A data.
6. Result: under my account, also in rpd Manage --> Sessions, user variable details
User_name , user_id & Rol variable is working fine as expected,
When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
User1, User2, and User3 are able to see the data correctly according the their data access setup.
Now, we using OBIEE 11.1.1.7.1 and using the same method, but we not able to assign users to application roles by using the initialization block to assign the ROLES session variables anymore.
Result:
User_name & user_id variable is working fine as expected, but the ROl variaible is not capturing the DB value,
When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
User1, User2, and User3 can see all data (which is wrong) because they are not assigned to the correct application role that sets the data restriction/filter.
Has anyone encountered the same issue? Any advice on how to solve this?
Thanks in advance!
Satheeshkumar P

Thanks user10615659   ,
- Yes the variable ROLES available in OBIEE 11.1.1.7.1
- Tested the init block and variables in offline rpd its working as expected.
- In online rpd, except ROLES and GROUP variable remaining variables working fine.
- Verified log file in both online and offline init block testing - the init block execution is successful.
Thanks

Text Variable not working correctly

In CS3 I could create a TEMPLATE (.indt) with the "creation date" text variable in it and when I opened it it would have the CURRENT DATE (the date the new file was generated from the template) . In CS4 it opens with the date the TEMPLATE was MADE and not the current date (the day the new file was generated). I need the template to open with the current date (the day the template was opened). I tried using the "modification date" variable which works the FIRST time but if I open it the next day the date changes. I need the date to remain the same as the creation date. Does this make sense? Why did Adobe change the behavior of this? Please help.
-John Streeter

Hi Rakesh,
Just curious what is the purpose of creating a hidden column as suggested? Anyway, I have created it but nothing changes.
Allow me to clarify my situation again.
I have three columns:
1. Actual This Year
Type: Selection
2. Actual Last Year
Type: Selection
3. % of Actual This Year / Actual Last Year
Type: Formula
Definition: (Actual This Year) %A (Actual Last Year)
All columns use &0T_FYEAR& as text replacement variable. As such, all title would have year text.
The first two columns have been restricted with Fiscal Year variable, 0P_FYEAR.
1. Actual This Year
0P_FYEAR
2. Actual Last Year
0P_FYEAR - 1
Upon executing the query, I got the first two columns displaying their titles right, but the third column does not.
For example, let's assume I entered 2008 for 0P_FYEAR variable, the columns would display the following titles:
1. 2008
2. 2007
3. &0T_FYEAR&
I need the third column to display current fiscal year i.e. 2008 but it does not.
Appreciate your help!

Update query not working in the JDBC sender Communication channel

Hi,
We are working on JDBC to File scenario. As per the configuration, XI should pick the data from SQL database every 20 secs and should update the corresponding flag. We are using subquery in the select and update statement as both header and detail tables are involved.
Now the issue is, select query is working fine but update statement is not working as expected. It is somehow updating some other records rather than doing for the ones selected by the adapter.
Moreover logSQLstatement is also not working. Hence we are unable to identify the records which are getting updated.
Please advise.

Hi Rumi,
See Question 8. Transaction Handling (Sender) in [SAP Note 831162 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 JDBC Adapter|https://websmp130.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=831162].
8. Transaction Handling (Sender)
Q: If I have the following configured in a JDBC Sender:
Select Query:
SELECT column FROM TABLENAME WHERE FLAG = "TRUE"
Update Query:
UPDATE TABLENAME SET FLAG = "FALSE" WHERE FLAG = "TRUE"
How do I know that the JDBC adapter will not update newly added rows (rows that were
added between the time that the SELECT and UPDATE queries were executed) that were
not read in the initial SELECT query?
A: The SELECT and the UPDATE are run in the same DB transaction, i.e. both statements
have the same view on the database.
Make sure that both statements use the same WHERE clause. An additional
requirement for the correct operation of this scenario is the configuration of
an appropriate transaction isolation level on the database
(i.e., repeatable_read or serializable). You might also consider using a
"SELECT FOR UPDATE" statement instead of a plain SELECT statement to
ensure proper locking on the database. "SELECT FOR UPDATE"
is not supported in MS SQL database. In this case please make use of an
appropriate transaction isolation level on the database. For more details
please contact your DB vendors.
After, see Transaction Handling Issues in [SAP Note 1039779 - JDBC Adapter issues(Escape character,Transaction handling)|https://websmp130.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1039779].
Best Regards.
Pedro Baroni

Bind Variable NOT working in APEX 4.0 within charts SQL

All,
I had a chart working fine in 3.2 which had a bind variable like :P11_EMP_NAME, when I created the same chart in 4.0 using the same query it did not work, until I changed the variable to v('P11_EMP_NAME'). Does anyone have experienced the same behaviour?
Thanks
Venkat

Hi Deb,
Both of your queries are using multi-series syntax i.e. returning more than one series of data, therefore your generated chart is actually generating 6 series rather than just the two that you're aiming for. You could try changing your queries to ensure they each generate a single series of information, which would then result in the extra Y-axis being applied to your "Series 2". Here's an example of what I mean:
Series 1:
select null link, label, value from (
select 'test' label, 1 value from dual
union all
select 'test2' label, 2 value from dual
union all
select 'test3' label, 3 value from dual
)Series 2:
select null link, label, value from (
select 'test' label, 100 value from dual
union all
select 'test2' label, 200 value from dual
union all
select 'test3' label, 300 value from dual
)I hope this helps.
Regards,
Hilary

Evaluate variable Not working properly

Hi
When i used Evaluate variable , It is having list of Operator (=,<>,IN etc).
When is specified operator '=' and give one value its working properly.
eg. Select name from table ;
O/p = AA
In ODI , Operator =AA its working .
But when i specified Operator "IN" and giving value ('AA','AB') Or value (AA,AB) its not working propelry.
Any other operator or any other option to use IN operator.
Thanks
Ashwini

Hi,
I never saw that "IN" woks!
There is a workaround, use a at variable refresh tab a command like: (you can refresh the variable from itself)
select case when '#project_code.my_var' in ('ab','a','x')
then 'OK'
else 'KO'
end
from dual
put it as refresh step and add a new instance as evaluate "= OK"
Does it help you?
Edited by: Cezar Santos on 05/02/2009 08:59

Filepath variable not working

Hi I have a page builder form and when the user is finished building her page, she can click "Write File" and the file will actually be saved to a particular folder as an html file. All this worked fine until I wanted to try and save these new files to a network shared folder so that our employer could copy the files over to his pc and review them before uploading to the remote server.
Here is the new file path variable and the path I assigned to it.

<cfset fileExtension = ".html">
<cfset pathToFile = "C:\webdes-pc\newPageFiles">
<cfset fileToWrite = pathToFile & SESSION.fileName & fileExtension>
Here is the original code that worked perfectly.

<cfset fileExtension = ".html">
<cfset pathToFile = "C:\ColdFusion8\wwwroot\replacememntlightbulbs\pageBuilder\">
<cfset fileToWrite = pathToFile & SESSION.fileName & fileExtension>
Is there a reason why I could not write a file to a networked folder? I would have thought there wouldnt have ben a problem with that idea. Thanks for any help in advance!

function(){return A.apply(null,[this].concat($A(arguments)))}
ilssac wrote:
<cfset pathToFile = "C:\webdes-pc\newPageFiles\">
That worked? That looks like a mapped folder and those usually do not work because ColdFusion runs as a different user then the whomever might have mapped the folder?
What usually works is a UNC path more like "\\webdes-pc\newPageFiles\" after ColdFusion has been configured to run as a domain user that has the permissions to that network path rather than the default "localSystem" user which usually has NO network permissions.
Actually you might be right. I think I have a folder named webdes-pc in my C drive as well. I had the file path set as \\webdes-pc\newPageFiles\ as you suggested before, but might have not had the last backslash on there either. So I think when I get to work tomorrow I will try this path again. Thanks!

I/o server shared variable not working in deployment system ( error no-1950679034 (0x8BBB0006) (Warning))

Hello ,
am using shared variable from opc client in labview when am run a exe file at development system its working fine but when am running it in deployment system its not working am using same configuration file in opc server at development and deployment system error -1950679034 (0x8BBB0006) (Warning)

First Root cause needs to be identified before any actions.
I would suggest first check if you can access the shared variable hosted in PC from RT using other ways like using SVE API (Logos and PS protocols, Datasocket etc..)
Check if antivirus or firewall is playing...
Check the same experiment with some other PC if you can.
You can also try creating another Shared Variable in RT and binding the same to the PC and try to access it...
Since you have did all the reinstallations already
Best Regards,
Vijay.

Query key Date Variable not working

Hi Folks -
I am coming across an issue with which some of you might be able to help me. I have a time dependent master data object which I've marked as a datatarget and have created a report on it. I wanted to give the user an option of specifying the key date and hence have created a variable in the query properties for the key date. This variable is of the type SINGLE VALUE, MANDATORY, USER ENTRY and CAN BE CHANGED DURING QUERY NAVIGATION.
Now my issue is that even though I enter a specific key date, the query is not pulling the records according to the key date. But instead if I use the option of specifying a particular date (instead of a variable in query properties), the query is running fine!!! Can someone please let me know why this is happening? Why is the query working fine when I mention a single constant value but not when I use a variable? Thanks for your help in advance.

hi
This clearly shows your variable is not working fine
So in RSRT transaction debug using your variable
See in every step whether the variable is working properly
Assign points if useful
Thanks
N Ganesh

Payload variables not working & Profiles stuck on 'Sending'

Similar Messages

Maybe you are looking for