Paym.guar.proc. Field is Disable after Upgrade to ECC6

Hi All,
Would like to have your guide and opinion which Paym.guar.proc. Field is Disable after Upgrade to ECC6.
Thank you in advance.

Hi Lakshmipathi,
As per checked, only SO to DO document created only.
We have implemented below change Note : 1736052 with change of SAPMV50A2112, I/O field LIKP-ABSSC from output field to input field that was working fine.
Please let us know you have any feedback on it.
1736052 - Entering the payment guarantee procedure in delivery note
Trevor Wong.

Similar Messages

  • Ipad disabled after upgrading to IOS7.

    Ipad disabled after upgrading to IOS7.

    I called Apple support. The tech stated he had the same problem himself.
    He tried to have me restore my ipad from the backup on my MAC. This resulted in an error message stating my device did not have authority to be restored. The tech put me on hold to research further and Apple dropped my call. I'm hoping the Genius Bar guys have an answer which is where I'm heading next.

  • After upgradation to ECC6.0 two fields in report not showing

    Hi,
       While running  Z report  Vendor and Material Description is not appearing.This problem is faced after upgradation to ECC6.0.In 4.6C it was showing in detailed. Is there any reports for settlement document having material & vendor code with description.
    Regards
    Nitin A

    Hi Mohamed,
    Thanks a lot for your immidiate reply.
    Is there any reports for settlement document having material & vendor code with description.
    Regards
    Nitin

  • Help for date field not working after upgrade

    hi experts,
    In our BSP application for a page we had an inputfield (date).
    Onvaluehelp for input field we were calling the saphelpdate function.
    however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
    we have upgraded to SPS 16 recently.
    please help me.
    regards,
    Arvind.

    Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
    DATA: BEGIN OF T_PCONT OCCURS 0,
          PCONT LIKE ZPSPERMISOS-PSOBKEY,
    END OF T_PCONT.
    DATA: BEGIN OF T_FIELDS OCCURS 0.
            INCLUDE STRUCTURE help_value.
    DATA END OF T_FIELDS.
    DATA: BEGIN OF T_VALUES OCCURS 0,
          VALUE(60) TYPE c.
    DATA: END OF T_VALUES.
    DATA: N TYPE i.
    SELECTION-SCREEN BEGIN OF BLOCK  b20 WITH FRAME TITLE text-b02.
      SELECT-OPTIONS:
        P_CONT FOR  ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
        P_INT  FOR  ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
        P_FEC  FOR  ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,    
        P_RAZ  FOR  ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK b20.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
      PERFORM P_HELP_P_CONT USING P_CONT-LOW.
    *&      Form  P_HELP_P_CONT
    FORM P_HELP_P_CONT  USING P_P_CONT.
      DESCRIBE TABLE T_PCONT LINES N.
      IF N EQ 0.
        T_FIELDS-FIELDNAME  = 'PSOBKEY'.
        T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
        T_FIELDS-SELECTFLAG = 'X'.
        APPEND T_FIELDS.
        CLEAR T_FIELDS.
        SELECT PSOBKEY FROM ZPSPERMISOS
        INTO  TABLE T_PCONT.
        SORT T_PCONT BY PCONT.
      CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
        EXPORTING
          CUCOL        = 10
          CUROW        = 1
          TABNAME      = 'T_PCONT'
          FIELDNAME    = 'PCONT'
        IMPORTING
          SELECT_VALUE = P_P_CONT
        TABLES
          FIELDS       = T_FIELDS
          VALUETAB     = T_VALUES.
    ENDFORM.                    " P_HELP_P_CONT
    Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
    Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

  • Issue with the material field in ME23N after upgrade

    Hi Experts,
    We are having an issue with transaction ME23N in ECC6.0 after upgrade from 4.6c.
    In this transaction for the given PO the value of the material is not populating. The material coloumn is displaying but the value of the material is not coming.
    For the same PO with the same data we are able to see the material number in ME23N in 4.6c.
    Please help me to resolve this.
    Thanks,
    Rakesh

    Hi,
    If you are a functional consultant then check the configuration settings in SPRO and compare it with the one in 4.6c system to find if the material number display in ME23N is enabled in your new system or not. Go to tcode SPRO and Material Management-> Purchasing->Purchase Order->Define Screen Layout at Document level.
    Execute this and select on ME21N or tcode that you are having problem with. Then press details button and double click on Enjoy fields. Check if it Display check box is ticked or not.
    KR Jaideep,

  • "manually manage music and videos" setting disabled after upgrading iTunes!

    Hello every one.
    I used to manage my musics and videos manualy , so naturally "manually manage music and videos" check box was always "cheked"
    Now after i upgrade my itunes to latest version (11.1.3.8), i find out that option is "Unchecked"!!
    So i am not able to copy any music or video or book too my iphon !
    If i try to enable that option again, it will clear my libraries and i will lose anything.
    Why this happened? what can i do ? any workaround? seems like a bug to me. i didnt do anything just updated my itunes. that option was enabled on my iphone for like 3 years! now i just upgrade my iTunes and that check box is unchecked.
    It seems stupid itunes think its another machine and says " it is synced with another library"
    Any suggestion please?

    Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
    I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
    Bythe way, here is how i fixed it :
    1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
    2-It showed a threating message that it will erase my music and videos ,......
    3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
    Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

  • My ipad is disabled after upgrading to OS7

    How do I enable my IPad after upgrading?

    The first step to take when any iOS device is acting up is to Reset it. I have seen excess battery drain ocasionally on every iOS device I've owned since my 1G touch. I would not consider it a major bug but something that happens on some devices occasionally. An app or process starts to misbehave pushing the processor to run harder consuming more battery power. The same happens on computers where they start to run slugish when a runaway process pushes the cpu to 100%. Just like restarting a PC Resetting the iOS device can clear out a misbehaving process.
    The most reliable steps I found to Restore:
    From the Home screen double tap the Home button to view the multitasking bar at the bottom. Tap and hold an app at the bottom till the icons wiggle with the minus button visible. Tap the button to close all apps then tap the Home button to get back to the Home page. Press and hold the Sleep button till you see the Slide to power off message and power it off. Once powered down completely press and hold the sleep button till the Apple icon appears.

  • Sharing to Facebook is disabled after upgrade to OS X Yosemite

    How to I enable sharing with twitter, email..etc after upgrade of the OS? I can't seem to find the place to adjust the setting

    Hi inanes,
    Thank you for using Apple Support Communities.
    You can add or remove your sharing options in Yosemite by going into your Extensions preferences located in the System Preferences.  Take a look at the information in the article below for more information.
    OS X Yosemite
    Take care,
    Alex H.

  • IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

    Hi
    We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
    Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
    Any help in this regard is highly appreciated.
    Thanks
    Pandiri

    User Exit activation and fixing the issue in user exit fixed this issue.

  • Idocs failing after upgrade to ecc6

    Hi Experts,
    we upgrade the system to ECC6, before the idoc to idoc scenario was workinf fine, but after upgrade we are getting error in we02 with Function Module Not Allowed
    Can any one help what was the wrong???
    Kind Regards,
    Praveen

    Praveen,
    Check out the message code and corresponding processing code in partner function(TC:WE20). Go to transaction WE57 and check for function module entry against your idoc basic type ( & Extension - if it is extended idoc) / message type. I think entry is missing here.
    Thanks,
    Nilesh

  • Error in depreciation postings after upgrade to ECC6.

    Hi FI/Asset Gurus
    We recently upgraded from 4.7 to ECC6.  In 4.7 our depreciation postings were working fine but, after upgrade it is throwing an erroru2026u2026..
    Create document number range Z2 using internal number assignment
    Our number range Z2 has always been External Assignment, before and after the upgrade.  Is there something changed in ECC.
    Please help me out?
    Thanks
    Rajesh

    Hi rajesh
    From ECC 5.0 onwards, your dep no range has to be internal..
    So, remove the tick for "External" in your no range for depreciation doc type.
    Regards
    Ajay M

  • Error in text formatting after upgrade to ECC6.0

    Hi all,
    After upgrading from 4.6C to ECC6.0, we encountered the error "The SD_WORD_PROCESSING function module is for creating the "Maintain Text" dialog box.  It seems that after upgrade, some of the text procedure in the configuration is missing.  Did anybody encounter this problem?  Please advise.
    Thanks.

    Hi Mei,
    Welcome to SDN.
    It seems the customizing for the texts (Transaction VOTX) is incomplete.
    Please check OSS Notes 150775 and 751690 for more detail information.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Syntax error after upgrade to ECC6

    Hi,
    I have customized infotype and BAPI in SAP 4.6. After upgade to ECC6, my Infotype is working fine, but my BAPI give this error : 
    The following syntax error was found in the program SAPLZBAPI_HR :
    "INCLUDE report "%_HR9000" not found."
    If I goto SE38 to recreate %_HR9000, SAP not allow me to continue and appear message "Do not use any special character".
    May I know how to resolve this problem ?
    Thanks a million.
    Regards,
    Eric

    Hi,
    In the ECC6.0 version, it seems that one of the INCLUDE that was generated for that infotype in 4.6 C ending.. with words....HR9000 was not transported or not found for that infotype. Please check all the includes..
    In SE38 you can enter the characters like %, so that error  is coming
    % means LIKE PATTERN ....HR9000 .
    Hope you understood.
    Regards,
    ANJI

  • I have two computers with WinXP SP3. At first FF 4.0.1 upgraded to 5.0 without disabling 2-pane bookmarks add-on, on the second I get warning that this add-on will be disable after upgrading to 5.0!

    Both instalations of FF are almost identical, profile of second was cloned to the first one. What to do?
    This is the latest version of this add-on:
    0.6.2011011701

    Thanks one again. I know you helped me the last to. I do have the Deja Vu font set in my folder. I downloaded and the last time. So I don't know if there is supposed to be more or not, but those were installed with Windows-XP after my reformat.
    This is really driving me nuts. as I've done several re-formats on my computer and several friends computers and even upgraded hardware so I am not necessarily a software or programming expert, I am somewhat advanced when it comes to computers in general and can usually diagnose the problem but these font's are the problem and they never were before.
    I did see in another forum that if you had a Dell Computer and did the Microsoft update for the onboard video card driver that it could be the culprit, but I have that disabled being I have a much better graphics card so the updates from Microsoft for the onboard video weren't installed.
    It' a Dell Dimension 3000 with an Intel(R) 82865G Graphics Controller so I don't believe it is the culprit being it is disabled. The actual video card that I am using is a PCI Nvidia GeForce 9400 GT with 1 GB Memory. And I didn't have any problem before.
    I appreciate the help. But still can't get things to work. Live Help Chat doesn't open for another two hours so maybe they can do "Remote Access" or something and can check setting and help me. But if you come up with other suggestions, they would be greatly appreciated.
    Thanks again.
    Susan

  • IPad Air's Wireless Disabled after upgrade to iOS 8.1.2

    Guys.. anyone of you encountered that once your ipad air upgraded to iOS 8.1.2, the wireless is disabled and you can't enable it back????? i'm having this issue and now my ipad air can't use wireless. i have done everything including restoration at itunes and ipad reset to all are not helping...!!!! i really need a solution..

    If Settings > General > Reset > Reset Network Settings doesn't cure the problem you likely have a hardware problem. Visit an Apple Store for an evaluation or contact Apple: http://www.apple.com/contact/
    This probably has nothing to do with iOS 8.1.2

Maybe you are looking for