Payment Advice by Email

Hi FI Guys,
With regard to remittance advice to vendors which currently is generated from SAP in my Co, once a payment proposal has been posted, i would prefer these payment advices be send automatically by email, by using the email id in the vendor master. This would do away with...
1 - Need to manually fax the payment advices and keep trying till the faxes go through
2 - Do away with complaints of vendors who claim not having received the fax.
I have changed the setting as Email instead of Fax in Vendor master but its not working. i think there must to be configure in SPRO.
Kindly revert with this possibility and please let me know what are the setting in configuration to change Email status?
Regards,
Yasir

Hi
Refer following links
https://forums.sdn.sap.com/click.jspa?searchID=5274567&messageID=3779575
https://forums.sdn.sap.com/click.jspa?searchID=5274567&messageID=4120324
Cheers
Muralidhar

Similar Messages

Vendor payment advice through email

Hi gurus
i want to send vendor payment advice through email , i am using the form F110_IN_AVIS for payment advice
and from the report RFFOAT_P i want to send the email , is any configuration needed to send the email , or just i have to give selection detials properly and it will work ,
regards
m.a

Hi Afzal,
For sending Payment advice by E-Mail, "You need to copy SAMPLE_PROCESS_00002040 and adjust it to write code as per your requirement. This BTE runs for each payment advice note to be sent and in the module, it is mentioned 1=print, 2 = Fax and I=mail, so you can set your priority, that if an E-Mail address is maintained in the vendor master, send mail or if no E-mail address is maintained send Fax, and if both are not possible shoot a Print.
From Configuration side, you need to maintain the Z copy of SAMPLE_PROCESS_00002040 in FIBF transaction under the Process module of a customer without country or application indicator.
SAP Note 836169 - Consulting: Payment advice notes by email or fax.
Regards,
SAPFICO

EDI Payment Advice by email

Hello,
I have setup the BTE 2040 as oss notes 836169. "Register it for the event 2040 in transaction FIBF, under the process modules of a customer without country or application indicator."
Then I run payment program RFFOD__S to generate IDocs for EDI payment. I expect RFFOD__S to call the z function module in the FIBF config and send email, but it was never been called. The Idocs are created.
What's missing for me? we are in version ECC60. I even tried to debug but for some reason the function module was not called ever.
Please help.

Hi G Krishna Kishore
can u give me more details on how u are using BTE to generate emails for Payment advice from F110.
We would like to send our payment advices as an email to our vendors from F110
Thanks
Dave

Send payment advice by email. SAMPLE_PROCESS_00002040 / 50

Dear all,
we using the BT FM SAMPLE_PROCESS_00002040 for sending emails in PDF form to email addresses of the vendor. We are able to create the entry in SOST and send it by email.
Now we have two additional requirements:
1. We want to use the email address on Correspondence Tab LFB1-INTAD - Clrk's internet instead of the email adress of the general date (SZA1_D0100-SMTP_ADDR) because the e-mail address in the general data is already used for logistic correspondence.
2. We want to create the email and additionally the printout. Can we realize this in the coppy of SAMPLE_PROCESS_00002040 or SAMPLE_PROCESS_00002050 and how?
I would appreciate all possible ideas and suggestions please
cheers
Detlef

This is for the email sending in the 2040 BTE function:
* This function module is used for BTE 00002040 to send payment
* advice notifications via e-mail for EFTs.
TYPE-POOLS SZADR.
DATA: LS_ADDR1_COMPLETE TYPE SZADR_ADDR1_COMPLETE,
        LS_ADSMTP_LINE    TYPE SZADR_ADSMTP_LINE.
* Default - Print payment advice
* Default layout in config is Z_CHK_ADVICE_LZ for checks
C_FINAA-NACHA = '1'.
* Check for vendor payment and wire transaction
CHECK: I_REGUH-LIFNR NE SPACE,
         I_REGUH-RZAWE EQ 'T'.
* Switch to the EFT advice
C_FINAA-FORNR = 'Z_EFT_ADVICE'.
* Check that address number is available
CHECK I_REGUH-ZADNR NE SPACE.
* Read complete address of vendor/customer
CALL FUNCTION 'ADDR_GET_COMPLETE'
       EXPORTING
            ADDRNUMBER     = I_REGUH-ZADNR
       IMPORTING
            ADDR1_COMPLETE = LS_ADDR1_COMPLETE
       EXCEPTIONS
            OTHERS         = 4.
CHECK SY-SUBRC EQ 0.
* Check that e-mail address is available
LOOP AT LS_ADDR1_COMPLETE-ADSMTP_TAB INTO LS_ADSMTP_LINE
       WHERE ADSMTP-SMTP_ADDR NE SPACE
         AND ADSMTP-REMARK    EQ 'EFT'.
    EXIT.
ENDLOOP.
CHECK SY-SUBRC EQ 0.
* Choose message type 'I'nternet and fill email address
C_FINAA-NACHA = 'I'.
C_FINAA-INTAD = LS_ADSMTP_LINE-ADSMTP-SMTP_ADDR.
BTE 2050 controls the output format, but since you can only specify one output medium, I'm not sure you can get it to print the spool immediately and still email the PDF. You might try setting the 'print immediately' indicator in the BTE, but I don't think it will work (though I haven't tried it or checked the code). If it doesn't, the email'd spools wil still be available so you can use a post-processing step to print them out.

Payment advice via email/fax

Hi gurus,
Currently i am working on soem enhancement related to FI payment advice ,tobe send thru email(if email number exists)or fax(if fax exists)otherwise i have to print that advice which will be in sap script format.For this i need to enhance the FM SAMPLE_PROCESS_00002040 .I am not having any clue to do from this FM.Can anybody already worked on this type of enhancement pls let me know how shud i do and if anybody know have the coding of FM's pls reply me asap. Its an urgent requirement for me.
thanks,
anil,,

HI mruthyun/anderson
I am sending my detail requirement..pls go thru it..
Requirement:...
Upon creation of payment media (via execution of programs RFFO* and variants as specified in transaction F110 and F111) the associated payment advice should be sent by:
a) Email (if Email address present)
b) By Fax (assuming Email address is not present and a fax number is present)
c) By print (assuming that neither an Email address or fax number is present).
Note 1: Payments advice notes will cover the following groups of business partners:
3rd party vendors
Intergroup vendors and Intragroup customers
Employees
Customers (refunds for example)
Note 2: The Email and Fax number will be taken from the address screen of the vendor and customer masters. There are legitimate reasons why multiple Email and Fax numbers need to be maintained in the address screen, typically there may be one or several entries for logistics reasons (to support sending of sales orders, billing invoices, purchase orders etc) and another entry to support finance reasons (e.g. this CIP dealing with sending of payment advice notes). With respect to multiple entries a default must be specified on the address screen, the default is important as this is the entry that is copied into the logistics documents (sales orders, purchase orders etc) and subsequently used for transmission (assuming an output condition record has been maintained to support Fax/Email), the default can be manually changed in the logistics documents (but typically this is something that is only done on an occasional basis). When adding an entry for finance reasons the default for any existing entry should not be changed as this would have a potential impact for logistics (this is no doubt already clear to the person/group that maintains address data given that multiple entries already exist). If the Email address or Fax number is the same for both logistics and finance then a separate entry is nevertheless required and the notes field for the finance entry should contain a description containing at least the word FIPAYADV in capital letters in order that the payment advice BTE (business transaction event) can identify the entry as being relevant for Payment Advice and select and use it accordingly.
Note 3: It is assumed that a fax cover sheet is not required for the fax option.
Note 4: It is assumed that the standard SAP Email description of the file meets requirements, this format is Payment advice note from XX.XX.XXXX where XX.XX.XXXX is the date upon which the payment advice is sent.
Note 5: The basis team will need to be informed of all users ID that execute F110 or F111 and they will need to be provided with their respective Email address in order that the data is maintained under transaction SU3. The SU3 Email address is used as the sender address, should the SU3 entry not be maintained then SAP will generate and use an Email address for the sender which will be in the following format Adrian Foster ([email protected]) where user executing F110 or F111 was AFOX06.
Note 6: This CIP deals with method of transmissions and not whether a payment advice note should be output or not. If there are requirements to limit the issuing of payment advices notes for certain payment methods (J, 7 etc) and/or company codes these should be limited via the RFFO* variants or alternatively not limited but instead output to a dummy printer or dummy Email address.

Vendor Payment Advice Note by Email

Hi everyone,
I configured vendor ACH payment advice thru email, and for that I activated function module BTE-00002040,its working fine and sends the ACH payment advice to vendors thru email as soon as we run F110 program for ACH, The problem is that when we run F110 for checks,system also puts the check advices for transmission,It wouldn't generate the check advices in the spool request SP01,I checked the sap note for ECC6.0, and it deals with the introductory text only. Does anyone have any idea how to prevent the system to put the check advices for transmission.ACH advices are working fine but check advices got messed up when I activated this BTE 00002040 funtion module.Thanks
Regards
Shaun

Anyone please guide on this .
Regards
Shaun

Urgent Prob with vendor payment advice

hi friends,
Had an urgent problem...all our vendors are not recieving the payment advices via email. friends help me out investigating the prob and guide me how to set it right.
thanks
regards
charlie
Message was edited by:
charlie2006 charlie

charlie,
look here
Re: F110 - Automatic email to vendor when payment run is carried out
A.

Vendor payment advice by e mail

In Vendor master,under General data address tab, in e mail tab we need to specidy email ID of respective person so as to enable him to get payment advice by email.
However,if more than one person intends to receive such payment advice by e mail,how can you configure this ?

Hello,
I would suggest to create a group mail for it so that you include different persons in that group.
To elaborate if you want to send payment advice to the below persons:
person1@testmail
person2@testmail
person3@testmail
you create a group mail <with the help of your sys admin>
groupperson@testmail,assign this mail to vendor master data....mails would go to multiple persons in the group.
Hope this helps
Rgds
Rajendra

Summry report for payment advice notes

Hi, All,
I have set up email payment advice notes. So if vendors have email addresses maintained, the process will sent out emaisl. Otherwise, it will print out. But after the process I only got the summary report for those printed ones. Those emailed out are not counted in. Is there any body know how to get summary report for emailed ones? Or how I can put printed and emailed ones together in the report? Thanks.
Meiying

Hi Yang ,
im trying to figure out how to send Payment advice as email from F110.
can u tell me how you do this
Thanks
dave

Payment advise by email

Hi,
We have activated sending the payment advise by email through BTE 2040.
The system is properly sending the email to the intended recepient after we run F110. This is fine.
Now our client want a copy of this mail to be available in the SAP OUTBOX of the user who runs F110.
How to configure this.
Regards
Raghu Ram

Dear Raghu
SOST is a transaction used to monitor emails which are going through internet.
In your case if you wish to send payment advice through email to vendor after F110 and also a copy to the user who is executing F110 , then u have to make some changes (abap coding) to the standard functin module.
The standard function module is SAMPLE_PROCESS_00002040. Please take help of abaper to modify the same so that you can send a duplicate email to any other mailbox.
Thanks
Sanjeev

Customer Inbound Payment Advice

Hello all,
What is the actual purpose of Payment Advices on the customers side (Inbound). Can somebody explain me how to post the customer payment advice in the SAP system? My assumption is below; please correct me where you see I am wrong
Customer sends the payment advice via email
1) Enter the payment advice manually by FBE1
2) Then goto F-28 and Enter and Clear the Customer open items against the Payment Advice. (We would received the EBS to reconcile Bank Account with the actual payment)
Can somebody provide me valuable input regarding my understanding and questions.
Thanks

Customer payment advices are created through two processes.These are independent processes.
1) lockbox processing - if the system did not find billing docs or payments do not match with billing doc, then system will create payment advice. Later AR clerks clears this payment advice by applying the payment to right customer & billing doc
2) in the second process, customer pays to your bank directly and payment details were sent by EDI to you. EDI creates payment advices. You can use FBE2 & RFAVIS40 to process payment advices. These transactions call FB05 to process customer payments.
thnx

Email of Purchase Order and Payment Advice

Good Morning All
We wish to implement the emailing of payment advice documents to our vendors. However, we are not sure if the changes to the vendor master data required for this will also mean that purchase orders for that vendor will also be emailed. Does anyone know if this is the case or not?

Having done some testing I agree that the requirement for condition data for purchase order output makes it possible to email remittances and not purchase orders i.e. by not creating the MN04 condition data. However, in my testing, when I assigned an email address to the vendor for the purposes of emailing purchase orders, the payment advice produced by the next payment run was also emailed. I'm sure I must be missing something as, if nothing else, this would imply that the vendor would offer the same email address for both purposes. In desperation we are wondering whether we need to maintain multiple email addresses and use the standard number for purchase orders and somehow identify one of the other addresses as that to be used for the remittance.

Payment advices in F110 to be sent by email (PDF format) - step by step

Hi SDN,
We have a requirement to automatically send payment advices in F110 via email. The requirement is to send the file in PDF format. I've done a lot of browsing through in the forums, as well as check SAP notes, but none has really detailed a step by step process on how to go about it.
I've also checked SAP NOTE 836169, but it is also not that detailed.
Assuming that SCOT has been already set up by BASIS, I've done the following steps to test if the auto-email works, and here are the steps I did.
1. Vendor Master Data -Define u2018Std communication methodu2019 as SMTP (Internet mail) and maintain an email address in the vendor master data.
3. T-Code BERP u2013 Code to find the relevant BTE. Use the Selection Attribute to browse for your business area. In my case, it is AP-Payment Transactions hence FI-AP-AP-PT.
00002040 is the relevant process. This is a Function called SAMPLE_PROCESS_00002040. In this case, the FM only checks for an email address in the Vendor Master. If more logic is required a Z-version would need to be created.
4. Use t-code FIBF to create the enhancement.
a) Create a product.
A product groups together customer enhancements to BTEu2019s developed in the customer's namespace. All customer enhancements assigned to a certain customer product can be released with the Activate Customer Product indicator. The OPEN_FI function module for a certain customer enhancement cannot find the corresponding customer function modules, until this has been done.
Create the product name (for example ZMAIL) and make it active.
FIBF->Settings->Products->u2026of a Customer
b) Assign the BTE to the FM:
Settings->Process Modules->u2026of a customer
Assign the 00002040 process to the FM and Product.
5. Run the autopayment program F110.
After I run the following steps, no email is being generated by the system. Is there anything that I still need to do? Or could anybody please kindly provide a step-by-step process? I'm a functional person, so I won't be able to do ABAP programming for this. Thanks and regards to all

Hello,
Check SCOT and SOST transactions.
At a previous client using 4.6C we did a program and allocated it in F110. The program reviewed the payment tables and sent the payment advice (basic list) to the employee vendors.
Also check http://wiki.sdn.sap.com/wiki/display/sandbox/SendMailwithPDFAttachment
Regards
Waza

Vendor email for PO and payment advice

Hi Gurus,
Can anybody please throw some light on this scenario? We want to get started with emailing the PO's to vendor functionality. The settings are all done and everything is looking good to be implemented. But we have a situation, where the accounting department (as of today) is sending emails about the payment to the vendor (PI vendor). Now if we look at the following cases
case 1: VN is 3XXXX and PI 4XXXXXX linked on the vendor master of 3XXXXX. If we want to send the PO via email to VN, we just need to maintain the email address on the 3XXXXX vendor master and when the payment is processed (F110), the email about the payment will use the email address from the 4XXX vendor master. This case is working fine without any problem.
Case 2: VN is 3XXXX and PI is also 3XXXXX. (The exact same number) Then how will we deal with this case? because now the challenge is to maintain two email addresses on the vendor master (one for purchasing and one for accounintg). But on the vendor master, only one email address can be selected using a radio button to be used as default. Now how can we ensure that the PO gets sent to the proper email address of the vendor and when the payment gets processed how can we ensure that it will only send the email to the concerned email address and not the other.
we have the custom program that kicks in after the F110 is processed to pick up the email addresses of the PI partner role vendor to intimate them about the payment. Now is there any other place in the vendor master where the email address can be maintained rather than in the general data view of the vendor master to get around this problem. I would really appreciate all possible ideas and suggestions please
Thanks
Anusha
Edited by: anusha vemulapati on Mar 1, 2010 3:44 PM

Anusha,
Sending email for payment advice is standard enhancement available using BTE2040
Ravi has detailed the steps to use this BTE
It will be triggered automatically when you run payment run in F110 and pickup the email address from vendor master data.
You would just need to copy the standard sample function module to your own zmodule
Refer to the following link on how to implement a BTE
http://sapient.wordpress.com/2007/12/09/business-transaction-events-bte/
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7?quicklink=index&overridelayout=true

How do I add an email body text for remittance advices / payment advices?

Hello,
I am trying to send an email body text with the pdf remittance advice to my vendors.
Background:
We are running automatic payments to vendors via transaction F110. We have configured the pay run to produce remittance advices for vendor payments. Finally we activated the BTE 00002040, through transaction FIBF, to use a custom copy of the function module SAMPLE_PROCESS_00002040.
Our payment run sends emails with pdf-file attachments to our vendors correctly.
<b>The Issue:</b>
I can not find a way to add text to the body of the email with the attached remittance advice.
Has anyone advise on how to populate the email body with text?
Thank you and best regards
Karsten Arold

Hello Subhashree,
I have not implemented the functionality, but I found rerference to SAP Note 1033893 in another forum post.
Email text to Payment Advice in BTE2040
Allan

Payment Advice by Email

Similar Messages

Maybe you are looking for