Payment Advice does not exist- Lockbox Postprocessing

SAP Guru's-
I am unable to double click on the item to view the detail of postprocessing. I thought that by checking the box in config under control parameters it fixed this problem. I am in the test environment and I am unable to view the document under FLB1.
Please help.
Points guaranteed

Hi,
The problem is definitely not related to check box - partially apply.
I think there is some problem in the test file. Are you executing in foreground / background. Once the Lockbox file is executed, are you able to see on the screen if executed in foreground. If executed in background you can check the log.
Also check whether the origin and destination are entered exactly like in configuration in Test file. I suggest just take one line item in the test file and check whther that is getting processed.
Let me know if you are still having an issue in processing the Lockbox file.
Thanks
Murali.

Similar Messages

HT2534 this "none" payment button does not exist even for free software.

this "none" payment button does not exist even for free software.

Did you follow the instructions on that page exactly when creating the account ? They worked ok for me when I tried them yesterday in response to another thread.

Term of payment does not exist in target system

Hi Gurus,
Scenario: Classic, Self service procurment.
I made a shopping cart with my requirements.
PR and PO created in the backend system.
Posted the GR in SRM....and got the message of posted in the backend.
Posted the invoice in the SRM and message creation completed and found that it has not been posted in the backend (checked the PO history).
The message found in SRM SLG1...."Term of payment does not exist in target system" for that.
Checked the vendor conditions and found that terms of payment exist in the backend system for that vendor.
What could be the problem and how to resolve this issue?
Thanks in advance
SG
Message was edited by:
SRMGUY

Hi,
I am new to SRM.
We have created new payment term in ECC and replicated to SRM using BBP_UPLOAD_PAYMENT_TERMS. We are able to see in table BBP_PAYTERM and BBP_PAYMENT_TEXT.
But the non of the payment terms are reflecting into PO in SRM after this.
I am able to see the payment term in backend in BBP_PD. I am getting the below warning message when I click on Check Button.
'Term of payment does not exist in the target system'.
What could be the problem and how to resolve it?
Thanks in advance.
Best Regards,
Siddappa

Idoc INVOIC error Baseline date for payment does not exist

Dear All,
I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
The payment term is correctly maintained in the purchase order.
Idoc message type INVOIC MM.
Baseline date for payment does not exist
Message no. M8356
Diagnosis
You have tried to post a document without a baseline date for payment.
The system will not allow you to do this.
Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
Regards
Arnaud

Hello,
Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
Thanks anyway for your input.
Keep in touch.
Regards
Arnaud

SAP TAO Consolidation & CBASE_INIT.VBS.txt does not exist error message

Hi All,
I installed SAP TAO SP03 & have QC 10.0 & QTP 10.0 and recorded a sample transaction code and observedfollowing errors:
i) I recorded a transaction and opened the script from "Consolidation" tab from Configuration Tab and got an error popup saying that u201CUnhandled exceptions have occurred"
ii) Without using Consolidation, tried to run manually got an error saying that ""[QualityCenter] Subject\BPT Resources\Libraries\CBASE_Init.vbs.txt does not exist but i uploaded the file in the same location.
iii) Tried to recording using UI scanner and itu2019s not recognizing "Tabs" and some of the fields. I donu2019t know why some fields
are missing and "Tabs" headings too. Like "BASIC data" "Payment Data" are two tabs so "BASIC DATA" is not recognizing and under that some of fields u201CInvoice dates, Posting Datesu201D fields are not scanning. So used Object Spy but itu2019s so challenge to scan each and every field.
Please advice.
Thanks a lot for your help and very much appreciated in advance.
Regards,
Ram
Edited by: Rambabu Challa on Aug 25, 2010 9:14 AM
Edited by: Rambabu Challa on Aug 25, 2010 9:16 AM
Edited by: Rambabu Challa on Aug 25, 2010 9:20 AM

Hi Guys,
I have resolved the "CBASE" error but i am not able to resolve "Consolidation" error message: here is the more details about the error . Any thoughts please
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System: Object reference not set to an instance of an object.
   at SAP.TAO.HpIntegration.Consolidator.GetTestsInFolderNode(TreeNode targetNode, Int32[] icons)
   at SAP.TAO.Consolidation.PnlConsolidate.tvTestPlans_BeforeExpand(Object sender, TreeViewCancelEventArgs e)
   at System.Windows.Forms.TreeView.OnBeforeExpand(TreeViewCancelEventArgs e)
   at System.Windows.Forms.TreeView.TvnExpanding(NMTREEVIEW* nmtv)
   at System.Windows.Forms.TreeView.WmNotify(Message& m)
   at System.Windows.Forms.TreeView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
SAPTAO
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAO.exe
SAPTAOCommon
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOCommon.DLL
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
SAPTAOHpIntegration
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOHpIntegration.DLL
SAPTAOHpQCNetModule
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOHpQCNetModule.DLL
SAPTAOHpQCNetModule9
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOHpQCNetModule9.DLL
Interop.TDAPIOLELib
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/Interop.TDAPIOLELib.DLL
SAPTAOHpQCNetModule10
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOHpQCNetModule10.DLL
SAPTAOSelfCheck
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOSelfCheck.DLL
SAPTAOGuiScripting
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOGuiScripting.DLL
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
SAPTAOObjectSpyControl
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOObjectSpyControl.DLL
Interop.SapROTWr
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/Interop.SapROTWr.DLL
Interop.SAPFEWSELib
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/Interop.SAPFEWSELib.DLL
System.Management
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
Interop.TDAPIOLELIB10
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/Interop.TDAPIOLELIB10.DLL
CustomMarshalers
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
And also tried to record a transaction and when i am running , it is take so much time to execute . I don't know why.
Thanks for your inputs.
Ram.

Error in pakcage table or view does not exist but on sql prompt query works

Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0
The below package compiled in system user and trying to query on view v$session_wait however getting below error.
PACKAGE BODY SYSTEM.PK_DB_ALERT
On line: 212
PL/SQL: ORA-00942: table or view does not exist
I can execute same query mentioned below from sql prompt from system user and it works fine however it doesn't like from package, Please advice, thank you in advance.
SELECT SID, seq#, event, wait_time
FROM v$session_wait
WHERE event NOT LIKE 'SQL*Net%' AND wait_time <> 0
ORDER BY 2

SDD wrote:
Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0Which means package owner is granted select on view not directly but via roles. However, roles are ignored by definer rights packages/stored procedures/stored functions/triggers... You need to grant package owner select on view directly.
SY.
Edited by: Solomon Yakobson on Jan 21, 2010 4:06 AM

Object class name does not exist in IDM

Hi Team
We are process of Integrating GRC 10.1 to Enterprise Portal.Followed accordingly as per the SAP Note No. 1977781.
While running the Schema Job, we get a message Schema Imported Suxcessfully. While running the Job : GRAC_REPOSITORY_SYNC_JOB, the job
shows successful, but a Warning Message : User Adaptor Empty in SLG1 T.code.
I have checked the Path suffix,connectors,data source and all are maintained but no sure about this warning message.
Secondly,I tried for test creation of user on Portal via GRC 10.1.I am getting below error
"Object class name does not exist in IDM" Please see log below
Request gets closed stating Auto Provisioning failed.Please advice if someone has faced same issue and the steps taken to rectify it.
Thanks
Nitesh

Hi Nitesh,
We worked on this issue for quiet sometime with SAP to get this finally fixed You can check all below mentioned notes.
First Check:
Please check the Note: 1915763 - Error Provisioning from GRC 10 to SAP Portal while adding or removing a role in Change Account request type.
This Note says that if your LDAP set as data source is read-only in Portal, then you need to change it to Modifiable in order to allow create or change user belonging to LDAP.
We have set the UME correctly and no longer read-only. But our access requests still used to fail with the following messages.
"Object class name does not exist in IDM".
Second Check:
Kindly ensure the field mapping for portal is done in IMG settings properly.
If it is fine please check below note 2033714 - AC10.0: error in SGL1 "Object class name does not exist in IDM".
This note is only to check if you have made any mistake with your portal mapping and doesn't address the correct issue.
Third Check:
Finally after implementing SAP note 1941250 - UAM: Truncated parameters provisioned on changing users from Access Request
our issue got fixed.
Regards,
Madhu.

PowerOn Failed Error: Domain Does Not Exist

[Simon Thorpe's blog |http://blogs.oracle.com/simonthorpe/2009/07/migrating_a_vmware_server_2_wi.html] I'm new to OracleVM. The wizard through OVM Manager successfully converted a windows VMWare vm to ovm. I was able to start up the VM once and get the driver updates loaded. I was following Simon Thorpe's blog and other documents to complete this.
Upon reboot, I get the following error:
Start - /OVS/running_pool/ECM_Xmonth_2010_vm
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/vm.cfg'] => Error: Domain 'ECM_Xmonth_2010_vm' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 69, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 113, in start_vm
raise e
Here's my vm.cfg
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/ECM_XMonth_2010_disk.img,hda,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
maxmem = 2999
memory = 2999
name = 'ECM_Xmonth_2010_vm'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
sdl = 1
serial = 'pty'
timer_mode = '0'
usbdevice = 'tablet'
uuid = '4d3f3741-e29c-472a-bfaf-7416d31d21e8'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:4C:BF:71,type=ioemu']
vif_other_config = []
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = '****'
Any advice?
Edited by: dierardi on Jan 6, 2010 9:21 AM
Edited by: dierardi on Jan 6, 2010 9:24 AM
Edited by: dierardi on Jan 6, 2010 10:00 AM

dierardi wrote:
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/vm.cfg'] => Error: Domain 'ECM_Xmonth_2010_vm' does not exist.Check /var/log/xen/xend.log for errors during boot: Essentially, the domain is failing to be created properly on startup.
If this is a linux guest, try running xm create -c vm.cfg from the ECM_Xmonth_2010_vm directory to start the guest with the console immediately attached. You may be able to see a boot/GRUB related error. If this is a Windows guest, you could start it paused with xm create -p vm.cfg and then attach a VNC console. Once you have a VNC session, you can resume the guest and it will begin booting.

Table does not exist for the sys user

Hey Everyone,
I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
Thanks,
Sarang

Yeah i am using the query....
SELECT * FORM SCOTT.EMP
It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

Native SQL "Table does not exist in database"

Hi Developers,
I'm doing a database connection to an Oracle db and trying to read data using native SQL - I keep getting the runtime error "table does not exist in database" on the statement Fetch Next Cursor. The following is the code snippet (I've commented out the Exec SQL and Fetch Next to make sure I have a connection and I do). HR is a schema in the database and T_Donation is a table in HR.
Data: w1(3),
         c1 type cursor.
start-of-selection.
if con_name is initial.
    write: 'No connection specified'.                       "#EC NOTEXT
    return.
endif.
try to open the connection and catch the errors (if any)
try.
      con_ref = cl_sql_connection=>get_connection( con_name ).
    catch cx_sql_exception into sqlerr_ref.
    error occured
      write:
        'Could not open connection', con_name, '.'.         "#EC NOTEXT
      if sqlerr_ref->unknown_connection = 'X'.
        write:
          / con_name, 'is not defined in DBCON'.            "#EC NOTEXT
      elseif sqlerr_ref->db_error = 'X'.
        write:
          / 'sql error', sqlerr_ref->sql_code, 'occured:',
          / sqlerr_ref->sql_message.                        "#EC NOTEXT
      else.
        perform get_trace_file using dev_file.
        write:
          / 'DBI error', sqlerr_ref->internal_error, 'occured.',
          / 'See trace file for further info:',
            icon_read_file as icon hotspot, dev_file.       "#EC NOTEXT
      endif.
      return.
endtry.
connection successfully opened
write:
    / 'Connection', con_name, 'successfully opened.'.       "#EC NOTEXT
*- Get the data from MS-SQL Server
EXEC SQL.
    open C1 for
    SELECT HR.T_DONATION.DN_DONATIONYEAR
    FROM HR.T_DONATION
ENDEXEC.
do.
    EXEC SQL.
      FETCH NEXT C1 into :w1
    ENDEXEC.
    if sy-subrc = 0.
      perform loop_output.
    else.
      exit.
    endif.
enddo.
EXEC SQL.
    CLOSE C1
ENDEXEC.
close connection again
con_ref->close( ).
write:
    / 'Connection', con_name, 'closed'.                     "#EC NOTEXT
end-of-selection.
*& Form LOOP_OUTPUT
Output
form loop_output .
write: /5 w1.
endform. " LOOP_OUTPUT
Thanks for your help.
Jim
Message was edited by:
        James Barnes

Well my advice is to check the question in the sql tutorial, it will be quicker then getting an answere.

Saving photos to the web by creating events. Called the destination folder does not exist.

Hello,
I ask you for advice (assistance). A week ago I re-installed the PC and installed to the computer again Photoshop CS5. Everything works for me except for the function of storing images for web by creating events. Called me constantly destination folder does not exist. The problem I had before. I ask you this advice on how to solve this problem.
Thanks for the advice

hi,
i don't know if i integrate your code correctly, but it doens't work for me. I presently create skin for client and this plugin is really usefull for me.
i use win7 64bit home edition, and photoshop cs5
there is how i integrate this :
// EDIT ALEX GRENIER
function getPreferencesFolder() {
     var userData = Folder.userData;
     if (!userData || !userData.exists) {
          userData = Folder("~");
     var folder = new Folder(userData + "/xtools");
     if (!folder.exists) {
          folder.create();
     return folder;
function exportChildren(dupObj, orgObj, dupDocRef, folder) {
if (getCSVersion() >= 10) // CS3 Only
     // Create assets folder in Flex app's directory
     // var tempFolder;
     // tempFolder = new Folder (folder + "/assets/");
     // tempFolder.create();
     // EDIT ALEX GRENIER
     var tempFolder;
     tempFolder = getPreferencesFolder();
i put the code creating the folder in comment and put your code in place, i also put your function before the function creating file.
With the base code (without modification) photoshop is able to create my folder assets, but when it try to export the png, it export nothing, so i have a empty folder.
thank you,
Alex

The name "Pi" does not exist in the namespace "clr-namespace:PressureVessels".

Pi is the name of a class.
I made some major modification to the program in VS 2013, then after transferring the program to another PC with VS 2012 running, I am getting many errors that says:
The name "ClassName" does not exist in the namespace "clr-namespace:PressureVessels".

Cleaning removes all the stuff out your bin.
If all this stuff is in the one solution then that's equivalent to manually deleting it.
If your app is composed from separate dll then I maybe some versioning issue.
If not and you can't reproduce the issue on your dev machine...
Tricky.
You would have mentioned it if you were putting stuff in the GAC.
Could be a sln or csproj issue.
They occasionally corrupt.
What else.
How did you get your code onto the other pc?
Is it contained within one folder with no external references beyond .net framework ones?
If you did something a bit dodgy with your references a dll might be coming from somewhere which is on your pc and not on this other one.
The only other advice I can think of is to step away for a bit and do something else.
It's all too easy to get into a flat spin when something drastic happens and one has no idea wtf is going on.
I used to be a points hound.
But I'm alright nooooooooooooooooooooooooooooOOOOOWWWW !

ESS Salary statemenr: Form Does not exist error

Hi Experts,
As mentioned in may threads, I have changed the form name for salary statement to the custom form name in SPRO- --> HRFOR
But the portal displays "Form does not exist" error. Could not find a solution in any existing post on sdn.
Urgent help needed.
Thanks,
Shobhit

Hi,
If your payslip form is desinged in PE51, then follow these steps.
Employee Self-Service-> Service-Specific Settings-> Benefits and Payment-> Salary Statement-> Form Using HR Forms Editor (PE51)
a. Edit Feature HRFOR: Maintain the constant $CEDT$ for MOLGA 40 RCLAS +01(03).
b. Enter Payslip variant in EDTIN feature
c. Maintain smartform name in EDPDF
If your payslip form is designed in HRFORMS, then enter the form name in HRFOR feature and enter the variant in EDTIN.
Cheers!!
Ashutosh

Field KNVV-CHSPL does not exist in field status tables (TMOD*)

Hi Gurus,
Wile creating Customer master record at Tc= XD01 the following error coming as
"Field KNVV-CHSPL does not exist in field status tables (TMOD*)"
Plz help me its urgent.
Vinay

Hi
KNVV is the customer sales data table and CHSPL is the field name called Batch Split Allowed
My advice is to deselect the field name from the table and test it by creating it once again ...
Bobbili

File does not exist: ucm cluster...

Hi all,
I've a 10gR3 UCM cluster with 2 nodes. I've replicated a new web site project.
The request to node 1, works fine, but the node 2 gives an error. I've seen the apache logs at node 2 and get the next error:
[Fri May 18 09:10:04 2012] [error] [client 134.134.20.64] File does not exist: /usr/local/apache2/htdocs/<name of the website project>
It seems that the apache (at node 2) doesn't redirect to ucm and it's looking for the web site at local (apache document root).
This cluster has serveral web sites project working fine...but with this new web site project doesn`t work...
Any advices will be appreciated.
Thanks in advanced

do you see ucm related entries in your httpd.conf? are their any other .conf files being imported? perhaps in the /conf or /conf.d directory?
I'm thinking that you are missing a <Location /siteroot> or the <Location /> element on the broken server. I can't recall the 10g config off-hand, but there are some http server related post-configuration steps for site-studio. I'm thinking that they might not be working on the broken server. perhaps a restart of the http server on the broken server?
it seems that the path is going to the http server's documentroot instead of the ucm module, which it would do if the configs were correct.
I'd double/triple check those configs & do a restart of the http server.
-ryan

Payment Advice does not exist- Lockbox Postprocessing

Similar Messages

Maybe you are looking for