Payment Advice Issue- Print and fax at the same time

Hi,
Currently payment advices are being sent to business partners (vendors) thorugh fax/email. This is because process module Z_SAMPLE_PROCESS_00002040 is active in the system.
What I want to do is to be able to also print the payment advices even if vendor has communication data in the master data. Program RFFoEDI1 is used with a custom form. IDOCS are sent correctly to bank and remittance advices are faxed to vendor successfully. With business wanting hard copies of remittance advices, when I try to reprint after first payment run is done and faxes sent running RFFOEDI1 and the payment document number, system says no records selected. I searched in OSS and all the notes related to this issue are already in our system.
I have tried hard to solve this but no luck even I have done this before with other print programs but no RFFOEDI1. One option is to remove the fax/email addresses from vendor which allows me to print but client does not want to remove fax numbers from vendor master.
Any suggestions will be appreciated.
Dam

Look into BTE 2050, through which you could possibly e-mail an additional copy to a generic company e-mail as back up electronic filing of RA. And then you can print it if need to print them on Adhoc basis
Ron

Similar Messages

Can not connect to printer and internet at the same time

I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

The only way to print and use the internet (or university network) at the same time is to do one of the following:
(1) Connect the printer via USB to your computer.
(2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
The AEBS can NOT wirelessly join the network.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

Can I setup my P1606dn to eprint both Mac and PC at the same time?

Can I setup my P1606dn to eprint both Mac and PC at the same time?

Hi Poindexter65,
There is no setup involved to ePrint from a computer. So, the answer is yes. All you need to do in order to ePrint, is send an email (attaching whatever you wish to print) to the printer's email address.
Here is a link with more information about ePrint and specifications for attachment types, file sizes, etc.: https://h30495.www3.hp.com/help#eprint
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided.
Although I work for HP, my posts and replies are my own opinion and not those of HP.

WiFi x551 printnig from iphone and PC At the same time

Hello all!
HP Officejet Pro X551dw Printer (CV037A)
if i connect printer to WIFI - 192.168.60.0 255.255.255.0 network
and iphone connect this is wifi too
then i connect to LAN my PC - 192.168.61.0 255.255.255.0 network
Printer and PC can reached each other ( ping work \ routing )
i can connect printer as network printer for my PC?
Need printing FROM PC and IPHONE AT THE SAME TIME!!!!
how i can achieve this

Hi @Liks,
To get your issue more exposure I would suggest posting it in the commercial forums since the Officejet Pro X551 Printer is a commercial product. You can do this at http://h30499.www3.hp.com/t5/Multifunction-and-All-in-One/bd-p/bsc-420#.VCWbZoXEb8c.
The support page for your product may be helpful in the meantime: http://ow.ly/BZrCb
I hope this helps!
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

Error Running Oracle Apps and Discoverer at the same time

Hello,
We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
Thanks in advance for your help,
Carlos

Hi Michael,
I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
I should have put my comment in context :-)
a.) I was only stating that it was possible
and
b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
I would be glad to discuss anything privately.
As for the issue at hand, I can reproduce the problem and here is what is occuring.
I have EBS 11i configured with Jiniator 1.3.24
I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
a.) Sun Java Plugin or
b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
then you may get this conflict.
It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
You can workaround the situation by:
a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
See:
http://blogs.oracle.com/schan/2006/04/18#a23

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
NOTE: You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

Droid Turbo talk and surf at the same time

Hello,
So I just brought my Droid Turbo home and have started testing it. I bought it knowing that it only had one antenna, but I had read that a new update was pushed that allowed for simultaneous talk and surfing. My software update is up to date (21.44.12.en.US), and the notes on the update even mention this feature was included in the update (why it is a "feature" and not a standard is beyond me). I just tried it again, and I can't surf and talk at the same time. Can someone explain this issue; is it only possible when using advanced calling over XLTE? The discussions I could find on here were all dated 6 months ago (before the latest update).
Thanks.

Yes, they both have to have Advanced Calling for HD voice to work....but that is not what the OP was inquiring about. You can do simultaneous calls and data with the Turbo with ANY other phone (cell or landline) as long as you have Advanced Calling enabled on your phone. The HD is an EXTRA feature that makes for better call quality if both have Advanced Calling, but I assure you that you can make regular voice calls the same as with any other device, AND use data calling any cell or landline once you have it enabled on the Turbo.

Recording vocals and guitar at the same time, using the Alesis IO dock!

Hi there!
I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
Hope someone can help :)

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Surf and Talk at the same time (AT&T Commercials)

So I see all these commercials saying AT&T has the fastest 3G network. I also see the commercials about being able to surf and talk at the same time.
Now I was almost positive that was crap but figured let me test this out again just to be sure. Sure enough, on the Edge network (which might be the issue, might actually work on 3G which is very limited with AT&T it appears), the iPhone won't talk and do surfing at the same time. You get "Cellular data connections are not available during this call" as the message on your screen.
So is this just an issue with the iPhone specific or is this just bad marketing on AT&T's part?

This is possible when connected to AT&T's 3G network, which is not available in most rural areas. I do this often.
http://www.wireless.att.com/coverageviewer/popUp_3g.jsp
Verizon's 3G network has better coverage, but it is fast as AT&T's EDGE network.

Reading and recording at the same time with AudioUnit

Hi,
I am trying to read and record at the same time on the iPhone with AudioUnit. For the reading part I made an AUGraph which works fine, constructed like that:
NewAUGraph(&_graph);
_outputUnitComponentDescription.componentType = kAudioUnitType_Output;
_outputUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
_outputUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_outputUnitComponentDescription.componentFlags = 0;
_outputUnitComponentDescription.componentFlagsMask = 0;
AUGraphAddNode(_graph, &_outputUnitComponentDescription, &_outputNode);
_mixerUnitComponentDescription.componentType = kAudioUnitType_Mixer;
_mixerUnitComponentDescription.componentSubType = kAudioUnitSubType_MultiChannelMixer;
_mixerUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_mixerUnitComponentDescription.componentFlags = 0;
_mixerUnitComponentDescription.componentFlagsMask = 0;
AUGraphAddNode(_graph, &_mixerUnitComponentDescription, &_mixerNode);
AUGraphConnectNodeInput(_graph, _mixerNode, 0, _outputNode, 0);
AUGraphOpen(_graph);
AUGraphNodeInfo(_graph, _outputNode, NULL, &_outputUnit);
AUGraphNodeInfo(_graph, _mixerNode, NULL, &_mixerUnit);
_generatorUnitComponentDescription.componentType = kAudioUnitType_MusicDevice;
_generatorUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
_generatorUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_generatorUnitComponentDescription.componentFlags = 0;
_generatorUnitComponentDescription.componentFlagsMask = 0;
for(int i=0; i< [_urlList count]; i++)
SoundBuffer* soundBufferTemp = [_bufferSoundList objectAtIndex:i];
AURenderCallbackStruct renderCallbackStruct;
renderCallbackStruct.inputProc = MyFileRenderCallback;
renderCallbackStruct.inputProcRefCon = soundBufferTemp;
AudioStreamBasicDescription* inputAsbd = [soundBufferTemp getASBD];
err = AudioUnitSetProperty(_mixerUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
i,
inputAsbd,
sizeof(AudioStreamBasicDescription));
UInt32 zero = 0;
err = AudioUnitSetProperty(_mixerUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Input,
kInputBus,
&zero,
sizeof(zero));
err = AUGraphSetNodeInputCallback(_graph,
_mixerNode,
i,
&renderCallbackStruct);
This works well, for the recording AudioUnit I did the following:
OSStatus err;
AudioComponentDescription audioComponentDescription;
AudioComponent audioComponent;
audioComponentDescription.componentType = kAudioUnitType_Output;
audioComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
audioComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
audioComponentDescription.componentFlags = 0;
audioComponentDescription.componentFlagsMask = 0;
audioComponent = AudioComponentFindNext(NULL, &audioComponentDescription);
err = AudioComponentInstanceNew(audioComponent, &_audioUnit);
UInt32 size;
size = sizeof(AudioStreamBasicDescription);
err = AudioUnitGetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
1,
&_soundFileDataFormat,
&size);
_soundFileDataFormat.mSampleRate = 44100.00;
AudioUnitSetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
kInputBus,
&_soundFileDataFormat,
size);
AudioUnitSetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Output,
kOutputBus,
&_soundFileDataFormat,
size);
AURenderCallbackStruct renderCallbackStruct;
renderCallbackStruct.inputProc = MyRecorderCallback;
renderCallbackStruct.inputProcRefCon = self;
UInt32 one = 1;
UInt32 zero = 0;
err = AudioUnitSetProperty(_audioUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Input,
kInputBus,
&one,
sizeof(one));
err = AudioUnitSetProperty(_audioUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Output,
kOutputBus,
&zero,
sizeof(zero));
err = AudioUnitSetProperty (_audioUnit,
kAudioOutputUnitProperty_SetInputCallback,
kAudioUnitScope_Global,
0,
&renderCallbackStruct,
sizeof(AURenderCallbackStruct));
err = AudioUnitInitialize(_audioUnit);
Then in I setup a file to write in:
- (void) openFile
OSStatus err;
err = ExtAudioFileCreateWithURL((CFURLRef) _soundFileUrl,
kAudioFileCAFType,
&_soundFileDataFormat,
NULL,
kAudioFileFlags_EraseFile,
&_extAudioFileRef);
err = ExtAudioFileSetProperty(_extAudioFileRef,
kExtAudioFileProperty_ClientDataFormat,
sizeof(AudioStreamBasicDescription),
&_soundFileDataFormat);
err = ExtAudioFileWriteAsync(_extAudioFileRef,
0,
NULL);
All this things works well (I check by printing err in the log which I removed here for clarity).
And then in the callback for recording I do the following:
static OSStatus MyRecorderCallback(void *inRefCon,
AudioUnitRenderActionFlags* inActionFlags,
const AudioTimeStamp* inTimeStamp,
UInt32 inBusNumber,
UInt32 inNumFrames,
AudioBufferList* ioData)
OSStatus err= noErr;
AudioUnitRecorder* auRec = (AudioUnitRecorder*) inRefCon;
[auRec allocateAudioBufferList:1 size:inNumFrames*4];
err = AudioUnitRender(auRec.audioUnit,
inActionFlags,
inTimeStamp,
inBusNumber,
inNumFrames,
auRec.audioBufferList);
err = ExtAudioFileWriteAsync(auRec.extAudioFileRef,
inNumFrames,
auRec.audioBufferList);
return err;
(Then I close the file after recording at the same time I close the AudioUnit)
Now the strange thing is that all this works perfectly well in the simulator: I can record and play at the same time but on the device, the callback for recording is not ran (I check by trying to print something in the log in the callback function.) which men no writing in the file and an empty file in the end.
Any one has any idea of what could be causing this?
Thanks
Alexandre

Just in case some one might need it, I solved my problem:
I simply needed to initialize the AudioSession before playing/recording. I did so with the following code:
OSStatus err;
AudioSessionInitialize(NULL, NULL, MyInterruptionListener, self);
UInt32 sessionCategory = kAudioSessionCategory_PlayAndRecord;
err = AudioSessionSetProperty (kAudioSessionProperty_AudioCategory,
sizeof (sessionCategory),
&sessionCategory);
AudioSessionSetActive(TRUE);

[Solved] Sound with ALSA and PulseAudio at the same time?

Hi, I am using arch linux to play Counter Strike on.
While it works fine and all, I just don't get any sound in CS because I am using Mangler, which only seems to work with my microphone if I use PulseAudio.
I hope this is a rather simple issue, basicly, I just want to enable sound in PulseAudio and ALSA at the same time, is this possible?
Last edited by Paaskehare (2010-08-12 15:39:09)

I have read that PulseAudio decreases sound quality, and therefore I would not like to use this as a systemwide driver, but rather only where it is needed.
Please correct me if I am wrong
Edit:
Ok, sound quality isn't noticeably worse, so this will do. HOWEVER, while I am in Counter Strike my sound is delayed by ~1 second, and it is therefore useless, any thoughts on that matter?
Edit again .. Solved this time:
I set my ALSA plugin in winecfg to "Hardware Acceleration: Emulation" - that seemed to do the trick.
Last edited by Paaskehare (2010-08-12 15:38:56)

I cannot use data and voice at the same time.

I cannot use data and voice at the same time.
I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
This is a very basic issue, am I missing something? Please help.
My Model is lumia 820 with the latest portico update.
TIA
Sandeep

I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

Payment Advice Issue- Print and fax at the same time

Similar Messages

Maybe you are looking for