Payment advices - print consoldiated amount for EEs w/multiple banks

When an employee has multiple bank details records (IT0009) we are issuing only one payment advice form.  For example, the employee has a main bank and an other bank. 
At the bottom of this payment advice we output the amount of the bank transfer.  However, the system is issuing the amount of the transfer to the other bank only.  We would like to be able to display the total amount being sent to banks for the employee (that is, other bank plus main bank amount). 
Do anyone know how we can do this?  Since the system issues the payment advice for the first transfer found, and payroll fills BT with the other bank as 01 and main bank as 02, the total amount due to the employee is not available on REGUD at the time that the form is issued.  How can we generate a total paid to the employee amount that can be output on the payment advice?

This is why it's important that YOU make sure your info matches the bank records- name,  address, all of it. Apple cannot see what is on your credit card or bank statement. 

Similar Messages

  • Payment advice printing X's for Vendor related information

    Dear experts,
    We are implementing check printing from SAP. I have done the necessary configuration. The program RFFOUS_C does generate the check as well as payment advice. The check looks good.
    However, on the payment advice I am getting 'X''s for vendor related information. For e.g. Vendor Name, address, the related line items of the vendor which are being paid.
    I tried various ways to fix it but it is not making sense still. It always give me those X's. Has anyone experience this in the past? Any lead into a solution is welcome.
    Thank you very much,
    Vishal Thakur.

    answer

  • Payment advice printing wrong address

    Hello,
    When i am printing Payment advices using PaymentRun program for Travel Mgmt,It is picking wrong address of the employee,i checked IT0006 and it is maintained properly.
    can you please suggest where to check and from where Payment run program picks address. As i know address is maintined only in IT0006.
    Any help will be appreciated.

    IF IT IS A Z YOU CAN OBTAIN ALL THE REGISTRIES IT0006 THAT ARE BETWEEN THE DATES OF THE PAYMENT AND CHOOSE THE PRESENT ONE
    SAMPLE WITH IT0045
        SELECT PERNR SUBTY OBJPS BEGDA ENDDA DARBT TILBT ANRTE SPRPS TILBG
         APPENDING TABLE T_0045  FROM PA0045
         WHERE PERNR eq P_PERNR AND
         SUBTY IN R_SUBTY AND     SPRPS NE'X' AND
       ( BEGDA BETWEEN  V_BEGDA AND V_ENDDA  OR
         ENDDA BETWEEN  V_BEGDA AND V_ENDDA  ).
    IF SY-SUBRC NE 0.
        SELECT PERNR SUBTY OBJPS BEGDA ENDDA DARBT TILBT ANRTE SPRPS TILBG
         APPENDING TABLE T_0045  FROM PA0045
         WHERE PERNR eq P_PERNR AND
         SUBTY IN R_SUBTY AND     SPRPS NE'X' AND
         ENDDA EQ '31129999' ).
    ENDIF.
       SORT T_0045 BY  ENDDA PERNR SUBTY OBJPS DESCENDING .

  • Payment Advice Print sent to Vendor Through E-Mail

    Hi All,
    Thanks in advance.
    Is there any possibility to send my Payment Advice Print to my vendor through E-Mail in the standard transaction FBZ5.
    Regards:
    Sridhar.J

    Hi,
    Are you sending the Payment Advice print in the form of smartform?
    If yes, check those FM SO_NEW_DOCUMENT_ATT_SEND_API1.
    This is to attach the document to the mail.
    SO_NEW_DOCUMENT_SEND_API1.
    This is to send the mail from program.
    Hope it helps.
    Regards,
    Raj

  • APP - Payment advice print out

    Dear all,
    I want to modify the payment advice generated in Automatic Payment Program - F110.
    Can anybody tell me were can i find the ABAP program for payment advice which is generated thru F110.
    Thanks and regards

    Hi,
    First:the payment advice form is mentioned in OBVU-Formsusually it is SAP SCRIPT,like F110_US_AVIS for USA.If this layout needs to be changed,I think the sapscript needs to be modified and not the program.Program would be for generating payment advices.
    F110_PRENUM_CHCK is for check priniting.
    Thanks
    Aravind

  • Payment advice print 2 copies

    Hi All,
    When I run payment run, I will have payment advice printed from program RFFOUS_C.
    The requirement is to have 2 copies of each page created.
    How to do that ?
    Thanks,
    -M-

    Hi,
    Tried already, but that's not what I want. by adding sample print out , SAP will create page of proposal run which is not the correct data.
    I've decided to copy the standard program and modify it.

  • Cheque and Payment Advice print

    Hello All,
    We have a requirement on Cheque printing and Payment advice printing functionality.
    We are converting both the standard Sap scripts of Cheque print RFFOUS_C and Payment advice to a Z program.
    It's like we have a cheque format which is priniting the Cheque and payment advice in the different pages.
    Is it possible to print both on the same pages?
    If yes what are the pre-requisites-
    one thing i think is the dimensions of the cheque to invoke the customizations.
    Pls. let me know anymore information is required to proceed futher?
    Regards,
    Sumana.

    Hello.
    I have the same issue. My client requirement is to print the cheque on top and payment advice at the bottom, they have a pre-printed stationary with this format.
    They use the f-58 transaction to clear the vendor line items and print the cheque straight from there. Currently cheque is getting printed but they want to the payment advice to be printed below the cheque at the same time.
    I did some research but could not find a solution. If you have found a asnwer please let me know, Will let you know the solution if I find first
    Best regards,
    Isuru

  • Payment advice printing issue F110

    Dear expert,
    i have a problem when running the payment advice for vendor using F110. The payment advice can't print since encounter the erro messsage 'Cannot process message, no route from XXX to 028249'. Any one can give sgguestion on this, or had met the same error before. I will high appreciated you lights on this.
    thansk

    answer

  • FBZ5 -Payment Advice print without giving check details

    Hi all,
    I got one requirement regarding FBZ5
    I want to print only Payment Advice through FBZ5 without specifying check details (like check lot no).
    Currently check lot no is mandatory field. So how to skip check details ?
    For Payment Advice i am having separate Sap script and i am maintaining it through Tcode FBZP
    thanks,
    Amol

    Hi Sam,
    thanks for reply, I have executed program RFFOAVIS from SE38
    Now i am giving 'Program run date' , 'Identification feature' , and 'Paying company code'.....on executing its giving me message -->
    Program RFFOAVIS: No records selected
    Any setting i need to maintain in F110 or FBZP ?

  • RFFOUS_T Payment advice printing

    Hi,
    I needed to change the output of the payment advice form, so I copied the standard sap program RFFOUS_T in my custom copy ZRFFOUS_T, but when I execute the code using the  run date and ID I am getting an info message popup with the message "Payment method(s) are not allowed for this program" , but the same input data (run date and Id ) works fine in the sap standard program RFFOUS_T. can any body tell me how to solve this issue.
    Regards
    Narendiran Rathinavelu

    Debugging might give some clues. I am guessing that the report name might also be contributing to this. RFFOUS_T. Instead of renaming to ZRFFOUS_T try renaming it to ZFFOUS_T and run the program again. or try passing the original program name to a report name variable as RFFOUS_T instead of the Z.. one.
    Eg: In Include RFFORI99
    Prüfung, ob Report für diesen Zahlweg zugelassen ist -----------------
    check that report is valid for this payment method -------------------
      if flg_avis eq 0.                    "all reports except RFFOAVIS
        if reguh-rzawe eq space.
          reject.
        endif.
        clear tab_t042z.
        read table tab_t042z with key land1 = t001-land1
                                      zlsch = reguh-rzawe.
    scroll further down and you can try replacing some of the variables with values from the debug of the actual payment program. Run both standard program and your Z version in parallel and see where you will need to substitute the variables which might be causing this behavior.
    Please try this option.

  • Payment proposal for vendor with multiple bank accounts

    Hi there,
    I'm currently dealing with payment proposals (F110) with two conditions:
    1): several documents with different currencies are attached in the same payment run (one in GBP, one in USD and one in EUR)
    2): several banks are defined for that vendor in the master data. We assume that that three banks are defined in the master records (one in GBP, one in USD and one in EUR)
    We started developing a user exit to find a way to have the correct bank selected in depending on the document currency; it worked but only for one document-->payment is done to the right bank account even if the vendor has different bank accounts. Whenever several documents for the same vendor are included into the payment proposal, only one bank is selected out of our program, corresponding to the first document.
    I wonder if there is a way for setting up a bank selection in another way.
    NB: the partner bank type solution within the document is not an option as the sites (which are creating the PO) don't know about bank details and therefore don't indicate anything.
    Thanks for reply!
    regards,
    FX

    When you enter bank details in master, update field "Partner bank type" LFBK-BVTYP with free form value, may be currency is good choice.
    During invoice entry, this field is available for update, update which bank to be used for payment of this invoice. You may build logic to populate this field, like substitution to populate currency in this field during invoice posting.
    During payment, system checks value in field Partner bank type in invoice and selects corresponding bank.
    Hope this helps.

  • Payment Advice Form F110_US_AVIS asking for FAX # ???

    Hello,
    When run the SAP standard program RFFOUS_T in one client, which invokes the form F110_US_AVIS, it is trying to send a Fax !!!
    When the same program (RFFOUS_T) runs in another client , it works the way suppose to be, send the form to the printer.
    Best regards,
    Tom

    Hello
    We are facing some issues with the BTE 00002040 (Function SAMPLE_PROCESS_00002040) when we tried to run the scenario for FAX output.
    we have copied the FM SAMPLE_PROCESS_00002040 to Z FM and the logic is written as below
    IF c_finaa-nacha NE lc_i.                             
        SELECT SINGLE tlfxs INTO  lv_fax                    
                            FROM  lfb1                        
                            WHERE lifnr = i_reguh-lifnr  AND   bukrs = i_reguh-zbukr.     
        IF sy-subrc EQ 0.                                    
          c_finaa-nacha      = lc_2.                         
          c_finaa-tdschedule = lc_imm.                        
          c_finaa-tdteleland = i_reguh-zland.                 
          c_finaa-tdtelenum  = lv_fax.                      
          c_finaa-formc      = lc_fax.                        
        ENDIF.                                             
      ENDIF.      
    The variant used in F110 / RFFOAVIS_FPAYM contains run date, identification and the printer = 'PDF-EMAIL'.
    When we check the output from SOST, we can see the FAX was sent successfully out from SAP
    But the FAX server is unable to take the input and the IT people comment that the fax server is receiving .MSG file rather than /PDF file.
    We are unable to figure out how to change the format of the file and request your help if any one has faced sililar kind of issue,
    All valid opinions are welcome
    Thanks in advance!
    Sudha Handadi

  • Outgoing payment post different LC amount for same exchange rate as AP INV

    Hi All,
    I have this entry in my out going payments linked to a AP down payment that I cannot explain. This is a foreign currency transaction
    1. AP down payment
         FC
         USD 381,000 @ document exchange rate of .931277
         LC
         AUD 409115.66
    2. outgoing payment
         FC
         USD 381,000 @ document exchange rate of .931277
         LC
         AUD 448,235.29
         Although the outgoing payment document exchange rate is same as AP down payment , SAP has applied rate from exchange rate table (@.85)
    as a result LC amount is different and its created an exchange gain/loss entry. Any idea why this happen?
    Other info
    on payment means screen all transactions in USD and payment is NOT on account.
    Thanks

    Hi Smith
    Check the below link it may useful to you
    http://help.sap.com/saphelp_sbo900/helpdata/en/45/1149f129fc4805e10000000a1553f6/content.htm
    With Regards
    Balaji Sampath

  • Multiple copies for Payment advice using standard program RFFOAVIS_FPAYM

    Hi Experts,
    I have one requirement, need to print the payment advice form twice (one for account section and other for vedor). According to the existing process it uses standard SAP print program RFFOAVIS_FPAYM OR RFFOUS_C (for cheque payment) to print the output.
    When I tried to print the output by giving number of copies, it prints test pages but not the actual output. The actual payment advice note with proper values getting printed only once. I actually need to print this actual payment advice note twice.
    Do you experts know how to achive this? is there any configuration available to get this requirement? OR how can i do this without chaning Standard SAP program?
    Thanks in advace for your help..
    Regards,
    Prashant

    Hi,
    2 times printing can be done using Sap script.however, it would call for changes to your driver prog...
    in function call CALL FUNCTION 'OPEN_FORM'....u need to add  g_ITCPO-TDCOPIES = '2' and pass g_itcpo to OPTIONS structure of the FM.With this you can ahve 2 copied of ur output. I just test printed it.
    So in your case as yours is a standard program, you could probably create a copy of the Standard program and  add the above logic in your program.
    hope this help
    Cheers,
    Varna

  • F110 - Print payment advice only if more than 2 invoices paid

    Hello,
    i have configure a payment method for domestic payment transfer in France. The payment program is RFFOF__V.
    The payment advice form linked to the payment method is a SAP standard one F110_FR_AVIS.
    My customer wants to have the payment advice printed only if we pay 2 or more invoices to a supplier. Or in other words, he doesn't want to have the payment printed for payment for one invoice.
    Is there an easy way to do that (i.e. without ABAP programming!)?
    Thanks in advance
    Best Regards

    Kris,
    We are running the ECC 6.0 and we are eperiencing a lot of problems related to this parameters "Payment advice note control".
    Your advice is completely wrong. When we apply your suggestion the process is exactly the same, it means completely wrong. I think that SAP has not really corrected this issue.
    From our side we are tested all alternatives and the problem is still the same. It is a pity.
    Your faithfully.
    Manuel
    Manuel

Maybe you are looking for