Payment allocation Error

When i try to do the payment allocation for a supplier through AP-Payments, LOV does'nt show the debit and credit balances avaliable for a particular supplier. Instead, it throws and error saying "FRM 40502: Oracle error: Unable to read list of values" - Please let me know regarding how to resove this error. you can mail me to [email protected]

Hi,
Define this message as Warning by OBA5. If it isn't allowed go first into OBMSG.
Regards

Similar Messages

Payment Allocation

Dear All,
I have to assign in one payment allocation "Payment Advices" and "Other Payments" as well. But this the system doesn't allow and the following error message will be displayed:
"Combining advices of advice collection and other payments not possible".
Does anyone have an idea how we cayn post it?
Thanks a lot and best regards!
Katrin Gruber

Hi Katrin,
what do you mean with other payments? Or what is it in your concrete issue?
The error message says "payment advices of advice collection"...is it right, that you have more as one advice to allocate?
I think the concrete case is more transparent to the community if you would give us more details of the allocation: How many advices from how many different customers/suppliers? Which other payments? etc
Best Regards,
Andreas

Payment verify error!

I play KABAM / Hobbit app on an I-pad and I-phone daily. Mid game gold purchase on I-pad the app crashed (diff issue) and purchase transaction did not go through. Now, every time I open the game I'm asked for my apple I'd and password... then iget message " Payment verify error!"... close that and then I can play.
It's very irritating... I don't care about the 50 gold I never got... I just want to not have to sigh in in every time I open this app. I have a lot of $$$ invested in it and I would hate to loose it all... so I'm chicken to delete app without first asking the question. Any insite into this would be appriciated! Thx

I have this problem as well. I can make purchases but it is really annoying that I have to enter my account password twice and verify my payment information for every purchase I make.

Payment execution error

HI
         this is maqdoom ali
I getting error while go to the execution of payment terms error no f5413.
Best Regrt
NASERK.

Hi,
Define this message as Warning by OBA5. If it isn't allowed go first into OBMSG.
Regards

Allocation error when I create production order

Hi guys:
I met allocation error when I created production order with CO01.could you help me out?urgent!

hi
What is the excatly the error so that we can tell u the reason
regards
ramakant

Wrong payment allocation

Hi, if I allocate incoming payment to the wrong invoices for a particular customer, can i reverse the payment allocation and how? and what about I manually do the reconciliation from the Banking -- Automatic reconciliation module? Thanks for advice.

When you are in Incoming Payment screen, select 'Data--> Cancel'. That will reverse the incoming payment.
It might bet a bit messy if you have deposited as you will have to reverse the deposit before you can reverse the Incoming payment.

"Memory Allocation Error" when Building a DVD

Hi all!
I have a problem. When I start to build a DVD. Encore stops with a "memory allocation error". The project I tried to build is 3.06 GB, so it's must fit to a simple DVD. My HDD has enought free space.
I tried to build it on two totally different computers but the error is the same. I didn't find any answer for this error. Can anybody help me?
I use Encore CS4, and the project is made in Premiere Pro CS3.
The computer #1:
Windows Vista (but I tried also with XP)
1 GB RAM
250 GB HDD
The computer #2:
Windows Vista
2 GB RAM
160 GB HDD

I get the same! I was having an issue with video files from my digital camera, so I opened up Premiere CS3, which took them in and encoded them to MPEG-2 just fine (tisk-tisk! Premiere and Encore CS4 both failed to play them or encode them properly!!!)
Them I put these MP2 files into a project which has 2 menus, 4 video timelines, 2 slideshows with 200+ images and some background audio files (one linked to a menu, another plays in sequence after first finishes). The project is for PAL screen, and it is 4-some Gb, but less than a disk. I have 4Gb of RAM and 6Gb of page file, 70Gb free on my HDD. Running Vista Ultimate x64.
Slideshows render, and videos do not require transcoding, so the project is ready to build, it starts writing the ISO file, and crashes after 1.8-1.9Gb is written.
There seems to be no easy way to re-create my slideshow, or I would have just re-built the entire Encore file to see if that would work.
My PC is overclocked, I admit, I have not tried it without an overclock, but my system has been uber-stable for 12+ months! I will try and report if it fixes anything, but I doubt it. I have also tried to run this build after a fresh reboot with mostly everything turned off, to prevent system conflicts. If that's what it is, I must have missed something. But Encore CS4 is BUGGY LIKE GOD KNOWS WHAT!!!!! This is one crash I can't get around, but it's not the only one I've had. If anyone knows an answer, PLEASE post it here! Adobe guys please please please please! My project's already held up for a month!

Memory Allocation Error during Boot

Hi,
I am posting this on a different computer than the one on which I istalled Java because I can no longer get it to boot.
Here's the history:
I am working in Windows 98
I added a line to the autoexec.bat so that the PATH lines looked like this:
SET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=%PATH%;"C:Program Files\Mts";"C:j2sdk1.4.0_02\bin
I then rebooted and tried the javac and java commands in different folders and everything worked fine. I shut down the computer and tried to reboot a day later. The following are pieces of the message I received (I don't usually go near the autoexec.bat or system settings so I have no idea how to get past these errors, nor fix them):
SET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=C:WINDOWS;C:WINDOWS\COMMAND;C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1;"C:Program Files\Mts";"C:j2sdk1.4.0_02\bin
General Protection Fault in C:WINDOWS\SCANDISK.ALT at 0090:1921
Memory Allocation Error
Cannot load COMMAND, system halted
Please help!
Thanks,
Julie

SET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=C:WINDOWS;C:WINDOWS\COMMAND;C:PROGRA~1\UTILIT~1\SY
ATEC\PCANYW~1;"C:Program
Files\Mts";"C:j2sdk1.4.0_02\bin
General Protection Fault in C:WINDOWS\SCANDISK.ALT at
0090:1921This shouldn't have been caused by the Java installation. As I understand the situation, at load time scandisk has been called. This is usually due to the computer not having been shut down properly, or a sign of real problems. However, scandisk is unable to run.
You should try a forum/newsgroup for Windows for more help. My own suggestion would be to load to the command prompt (or try safe mode). (Press F8 during boot to get a menu.) And then run scandisk manually. If it works, try renaming the C:\WINDOWS\SCANDISK.ALT file and rebooting.
Regards,
Bhaveet

Checkdb found 6 allocation errors , how to fix ?

HI Experts,
checkdb found 6 allocation errors, how to fix ?
Thanks in Advance!
Vijay

Causes
file system corruption,
underlying hardware system issues,
driver issues,
corrupted pages in memory,
problems with the SQL Server Engine.
Possible solutions
1.best solution if CHECKDB reports consistency errors is to restore from a known good backup.
2. If you cannot restore from a backup, then CHECKDB provides a feature to repair errors.
3. If system level problems such as the file system or hardware may be causing these problems, it is recommended you correct these first before restoring or running repair. 4. Allocation error in Index page, please recreate the index.
Thanks - Vanchan.Please MARK AS ANSWER, if my answer is useful to U.

What is root cause of Error in InitVXI library. Allocation error in initialization?

The error result after executing ResMan; Error: Error in InitVXI library. Allocation error in initialization.
Hope you can help, thanks....

Hi ctapa,
If by chance you receive this error when attempting to run ResMan outside of Measurement & Automation Explorer (MAX), then you will want to refer to this KnowledgeBase article, which details how to fix such an error/crash.
Curious--what operating system do you run for your VXI system? Also, what version of NI-VXI do you have installed? (You can check this in MAX, beneath the Software tree) In addition to the "Error in InitVXI Library..." message you receive, do you see your system
exhibiting any of the problematic symptoms mentioned here? Replying with any additional information on your system and setup would be most welcome and aid in finding the cause of the issue.
Kind regards, and happy holidays!
Warm regards,
pBerg

Memory allocation error when burning in premiere elements 2

I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika

memory allocation error when burning in premiere elements 2
Erika Lindsay - 09:30am Jan 4, 2009 Pacific
I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika

Encore - Memory Allocation Error - With Dynamic Link

CS4 using Vista
The process (AdobeEncore.exe *32) gets stuck at 959,736K while 6GB is available.
In the past I have built many DVDs using a Dynamic Link from Encore to Premiere Pro.
Now they all end in errors: Memory Allocation Error & Unable to Create Image Buffer.
I monitored the process in the Windows Task Manager.
The memory use for the (AdobeEncore.exe *32) process grows until it reaches 959,736K.
The memory use stops there but the process continues for a while and then Encore stops with the errors.
I guess is that (AdobeEncore.exe *32) has become limited to 1GB but the is plenty of memory available.
I can Import a file and make a DVD without using the Dynamic Link.
Thanks

Was probably a hardware issue.

Memory allocation error with disk image

I'm having recurring problems with a large encrypted sparseimage that I mount at /Users (an arrangement I prefer to FileVault.) The file contains one journaled HFS+ partition. Every so often, open files on the volume vanish or become unwritable. At the same time, I get a long series of messages in the system log of the form
kernel[0]: disk4s2: memory allocation error.
There's plenty of memory available. When this happens, I have to log out all staff users, then unmount and remount the image. When I do so, fsck finds corrupted i-nodes, which it's able to repair. All is then well for a few days, except that the files that were affected when the problem occurred are gone and have to be replaced. I've tried the obvious things many times: creating a new image file from backups, deleting kernel caches, etc.
This looks like a bug in the HDI driver. I'd be thankful for genuine insight from anyone who actually knows something. Responses such as "Repair permissions" or "Reinstall Mac OS X" aren't needed. Thanks.
Dual G5 2.5 Mac OS X (10.4.8)

Was probably a hardware issue.

CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41)

Msg 2511, Level 16, State 2, Line 1
Table error: Object ID 41, index ID 1, partition ID 281474979397632, alloc unit ID 281474979397632 (type In-row data). Keys out of order on page (1:187), slots 9 and 10.
CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41).
CHECKDB found 0 allocation errors and 1 consistency errors in database 'db_name'.
repair_rebuild is the minimum repair level for the errors found by DBCC CHECKDB (adv_tvs).
Help required on the above error mentioned

Hi Rapunzel,
The minimum repair suggested is repair_rebuild you can try that. As per mssage there is corruption in your database and it can only be corrected by either repairing or Restoring from known good backup.For doing repair the database must be in single-user
mode.
Please read
dbcc checkdb repair_rebuild option
Since DBCC CHECKDB with any of the REPAIR options are completely logged and recoverable, Microsoft always recommends a user use CHECKDB with any REPAIR options within a transaction (execute BEGIN TRANSACTION before running the command) so that the user can
confirm he/she wants to accept the results of the operation. Then the user can execute COMMIT TRANSACTION to commit all work done by the repair operation. If the user does not want to accept the results of the operation, he/she can execute a ROLLBACK TRANSACTION
to undo the effects of the repair operations.
REPAIR_REBUILD does not repair errors involving FILESTREAM data.
How big is database. If it is small and backup also is corruption free you should consider restoring from backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Resman error: VXI A24 address allocation error on bus 0

When we execute resman.exe on our test system the following error occurs:
VXI A24 address allocation error on bus 0
We have the MXI Controller configured the same as other systems and our configuration is a pc and two VXI chassis. Anyone have any ideas on what could cause this error?

Hi Jim,
I do not immediately know the solution to the problem you are seeing, but have a few troubleshooting suggestions:
1. Check the pins on all of your MXI-2 connectors. If the cable
has damaged pins which cannot be bent back to place, you will want to
replace the cable.
2. Try a single VXI chassis, and then the other. If the problem
occurs with each chassis individually, then it is likely an issue with
the PC or cabling.
3. If the problem only occurs with one of the chassis in step 2, remove
all instruments from the chassis and try running resman again. If
this solves the problem, add your instruments back one at a time to
isolate which instrument could be causing problems.
4. If the problem occurs with both chassis in step 2, do you have another PCI-MXI-2 that you could try?
Let us know the results of your troubleshooting, and we'll be happy to help you out further.
Jason S.
Applications Engineer
National Instruments

Payment allocation Error

Similar Messages

Maybe you are looking for