Payment Block Validation for User group
Dear SAP Validation Expert,
We like to allow only selected FI users to change Payment Block to ' ' (Free for Payment) in tcode: FB02, FB03 and FBL1N.
Curently we have managed to block other un-selected users from changing the Payemnt block to Free for Payment.
But our issues are Other fields also NOT able from changing/maintaining. For example in FB02, user NOT able to change Payment Block (BSEG-ZLSPR) from 'B' to ' ' (Free for Payment) which is expected but user also NOT able to maintain other field such as Payment term(BSEG-ZTERM), Baseline date (BSEG-ZFBDT), Assignment (BSEG-ZUONR) and Text Field(BSEG-SGTXT).
Below is our Validation, please advice how to improve it so that other fields can be changed too. Your swift reply is very much appreciated.
Pre-requisite:
( ( SYST-TCODE = 'FB02' ) OR
( SYST-TCODE = 'FBL1N' ) OR
( SYST-TCODE = 'FB03' ) AND
( BSEG-ZLSPR = ' ' ) AND
SYST-UNAME <> 'HIS20083'
Check:
BSEG-ZLSPR <> ' '
Message: E: You have no authorization.
Hi,
In your Validation small change has to be done.
Pre-requisite:
SYST-TCODE = 'FB02' ) OR ( SYST-TCODE = 'FBL1N' ) OR ( SYST-TCODE = 'FB03' )
Check:
SYST-UNAME 'HIS20083' AND BSEG-ZLSPR = ' '
Message: E: You have no authorization.
Try in the above procedure.
Thanks
Goutam
Similar Messages
-
How to create a valid database User/Group for installing Linux 5,3
HI:
I am trying to install E-Business Suite on LINUX and gave me the following error report
Unable to validate Database User/Group :oralce /dba
Provide a valid Database User/Group for the installation.
when I was installiing on Windows, it did not gave me this error.
How do I have to crate a user/Group to install eBusiness on my Linux/
Please help
AliHi user;
hi Ali;
Yes I run as a root userKeep using root
When I use the following at the terminal
It gave me a error message
" Provide a valid Database User/Group for the installation. "
Here is what I type at the terminalIts seems normal becouse u try to create same user!
root@vis groupadd dba
root@vis useradd -g dba -d /home/oracle vis
root@vis useradd -g dba -d /home/oracle oracle Try this plz:
groupadd dba << i think this group already created!
useradd -g dba -d /home/applmgr applmgr << for apps node
useradd -g dba -d /home/oramgr oramgr << for db node
As you notice we define 2 different user under /home path!
Regards
helios -
Payment block rerlease for vendor/customers
Hi Gurus
which t-code we used for payment block rerlease for vendor/customers
regards
MallikarjunaHi,
For more clear Use FK05 for vendors
Give company code and Vendor account no
enter
You get screen where you should deselct payment block either code / all company codes
For customers FD05
Same procedure
If it is useful please assing points
Thanks
RAM -
Wage Type is not valid for allowance grouping
Gurus
When i am Executing PC00_M40_TERM and entered Details then in very next screen it is with error
''Wage Type is not valid for allowance grouping ''
The Issue is showing generic and No specific Wage type shown in error.
ABAP Team also Debuged and could not get the Issue.
Kindly Let me know from your Experience what could be the Issue.Your wage type is missing in allowance grouping configuration against RAP indicator R,Reimbursement
Check table V_T7INA9 , check the wage type is configured for the allowance grouping of that employee with RAP Indicator R, Reimbursement -
Assign payment block Reasen for each Tolerance key
Dears experts ,
hi , could you help me to check is it available to assign payment block Reason for each Tolerance keyHi,
Please provide Details of your exactly requirement --
as per my observation - above mentioned Tolerance key in QM Quality Management -- Payment block we can't assigned
Thanking you
Mahesh -
Dear Team,
When I am creating Query for user group via T-code SQ01.
Query ZDEMO1 then Create
This messege is comming .
System setting does not allow changes to be made to
object AQQU /ISDFPS/OM ZDEMO1
Why this messege is comming .
Thanks
manuDear Manu,
Please check in SE06 >> change system options >> if the system and the relevant object is in modifiable status.
Cheers,
Jazz -
Payment block field for Vendor
Hello,
Is it possible to set user authorization in a way that user has display option for a vendor and change option only for the field 'payment block'?
Regards,
DraganHi Dragan,
There is no smaple code, that SAP provides with this exit. The enhancement is SAPMF02K and it's called on every 'Save' of vendor master data. You have to write a program to check the change to the field in question and see whether the user is in the authorized group (set). Please, ask to your ABAP team to help you on this.
Regards,
Eli -
Payment block set for Down payment requests processed via F110
When I process a vendor down payment request from F-47, it gets paid during F110. However it gets posted to Vendor a/c with special GL indicator and with a "payment block". I am not sure why the payment block is put automatically. Can this be functionality be changed.
Hello Krishna,
Can u pls elaborate the question.
Step1: Post down payment request F-47
Step2: Post down payment against request F110
When your getting this payment block.
however pls go through this path
IMG/FA/ARAP/Business transactions/Outgoing payments/Outgoing Payments Global Settings/Payment Block Reasons/Define Payment Block Reasons or Define Default Values for Payment Block
Regards
Murali -
How many ways we can create authorization for user groups in sap query reports
Hi Gurus, I am getting a problem when I am assigning users to user group in sap query report .The users other than created in user groups are also able to add &change the users .So please suggest me how to restrict users outside of the user group.
Please send me if u have any suggestions and useful threads.
Thank You,
Suneel Kumar.I don't think it can be done. According to the link below 'Users who have authorization for the authorization object S_QUERY with both the values Change and Maintain, can access all queries of all user groups without being explicitly entered in each user group.'
http://help.sap.com/saphelp_46c/helpdata/en/d2/cb3f89455611d189710000e8322d00/content.htm
Although I think you can add code to your infoset and maybe restrict according to authority group, i.e.:
Use AUTHORITY-CHECK to restrict access to the database based on user.
Press F1 on AUTHORITY-CHECK to find out how to use it in the code -
Hi Experts,
Is there a way we can build validations on user statuses?
Here's the scenario: For ex- There are two statuses without status numbers - 1) X 2) Y
Is there a way we can restrict the user to select only one at a time i.e. either X or Y?
Note: We cannot use status numbers because of the nature of the user statuses (X and Y), it will be a manual check only no radio button.
Please Advice.
Arya
Edited by: Arya Singh on Dec 9, 2008 3:52 PMtxn OPSI
go to the check mode
exit tab
you can see some user exits there
e.g UFP01 etc
or use BADi to build the logic on save project (projectdef_save) -
Planner provisioning for user groups lost in Shared services
Hi All,
Everything was fine. All of a sudden, no users were able to login in to planning.
On investigation it was found that all the planner/planning provision to the groups is lost in the shared services.
Digged into log for a while and couldnt find out any issues.
What could be the reason we lost user group security provisioning only to planning?
Could anyone please help on this?
Regards,
GGI used to have same experience every time migration happens from dev to UAT or prod etc.
After migration, registering with shared service will be successful. When i try to sync, migrate user identities (provisionusers.cmd) from shared service all user group info vanishes in planning (Add/Edit access page). i.e hsp_access_control table is truncated or all rows are dropped.
Then i have to set it up correctly. Guess this happens because usergroups have different id between different environments. When sync'g planning at target, it will not be able to recognize the wrong usergroup id of source system.
My assumption:
When provisionusers.cmd is run, planning fetches the usergroup provisioning information from shared services in to hsp_access_control planning repository table. could someone confirm the same?
Is there any other way to overcome this issue recurring on every time migration happens?
But the problem today was different: the provisioning is lost in the shared services itself which i havent witnessed so far. We didnt migrate recently, everything was file till 8 AM, but screwed around 8.10 AM. everything was up and running.
Cheers,
GG -
Active Directory Authentication and permissions for user group in APEX 4.0
Hello,
I am new to oracle APEX and I have searched the forum for active directory authentication for a user group and I am really confused about all the different threads. Can anyone please provide me the steps to follow; in order to implement AD authentication for a user group in Oracle APEX 4.0.
These are the threads which i was looking at to get an idea like how AD authentication works but its really confusing for me.
Help with Authentication (APEX_LDAP.AUTHENTICATE)
Re: LDAP Authentication Via Groups
Thanks,
TonyYou need to give it more than 30 minutes before bumping your own post. This is not an official support channel, so you need to be patient and wait for people to read, think and respond.
-
How to hide/show dashboards for user/groups
Hi,
Please help on how to hide/show dashboard menu/sub menu to users/groups based on their profile settings.
thanks in advance.
regards,
kumar.Hi Jinu,
1) Do some or all of those subreports span multiple pages?
2) Do each of the Subreports start on a new page?
If yes, for both, then here's what you need to do:
1) Create a formula (@True) with this code:
shared booleanvar SetStatus:= True
2) Create another formula (@False) with this code:
shared booleanvar SetStatus:= False
Drag and drop the @True formula on the details sections for which you want the Page Footer to be suppressed.
Similarly, drop the @False formula on the details sections for which you want the Page Footer to show up.
Then, go to the Section Expert > Select Page Footer c > Click the formula button beside Suppress and use this code:
shared booleanvar SetStatus;
-Abhilash -
WLS: more fine granularity for User, Groups, Roles
Hi All,
in order to organize different user, groups in WLS, I need to use/define more condition/attributes than standard WLS User and Groups.
The Oracle WLS concept and OPSS is clear to me and I need some samples or practical cases.
- Oracle Fusion Middleware 11.1.1.5, Security Guides http://docs.oracle.com/cd/E21764_01/security.htm
- Oracle® Fusion Middleware Understanding Security for Oracle WebLogic Server 11g Release 1 (10.3.5) http://docs.oracle.com/cd/E21764_01/web.1111/e13710/toc.htm
- Oracle® Fusion Middleware Securing Oracle WebLogic Server http://docs.oracle.com/cd/E21764_01/web.1111/e13707/toc.htm
- Oracle Platform Security Services 11gR1 (White Paper)
http://www.oracle.com/technetwork/middleware/id-mgmt/opss-tech-wp-131775.pdf
Any idea?
Regards,
MohHello Suman,
Try avoid denial based security rights assignment instead you can specify the unspecifed. As Greg said
Denied + Granted = Denied
Denied + Not Specified = Denied
Granted + Not Specified = Granted.
You should not deny rights for HR End User usergroup, Instead make them as unspecified. If you do so the whenever the user part of both the groups , your security rights aggregation would be
Granted + Not Specified = Granted.
Make sure you follow the approach as above. You can refer the blog below for how to structure the folder, report and User group hierarchy and effective maintenance of security
BusinessObjects Administration - Content Management Plan
Regards
Mani -
Code is only valid for users of store
Help....
Ive just gifted an app to my son as I often do and when he tries to redeem it it says "This code is only valid for customers of the Store".
Ive looked this up and normally it will involve someone from one country trying to gift an app to someone in another country but with me this is not the case.
My son lives in the same country, the same address everything.
The app was called Kick the buddy: Second kick
Can anyone please help
Thank youThanks to James, I have just had a reply saying that they do not know why this error has occured but they have refunded my purchase costs.
Good luck to anyone who has the same problem
Maybe you are looking for
-
Error message in ME21n / me22n (on save)
Hi Gurus I need to raise a error message in ME21n for which I am using ZXM06U44 and EXIT_SAPMM06E_013 I followed this link to help me out... https://forums.sdn.sap.com/click.jspa?searchID=20007769&messageID=6723170 I am getting a informati
-
Only bold text physically prints from a printer from a PDF created in Pro 11.0.2
Hi. I have created a PDF of a Microsoft Excel spread sheet in Adobe Pro 11.0.2 but some of the text does not print. Have tried two different printers but get the same results. There seems to be a pattern in what does and does not print, but it does n
-
How do I download my home videos to ipad 2
How do I download my home videos to ipad 2
-
Cant view video on the internet
when i go to a site and it has video, I see a Q with a ? over top of it. why cant I view these videos
-
No Path display in Spotlight?
When Searching in Spotlight in Snow Leopard, I could hover the cursor over an item in the list shown from its search and it would provide me wiht the path for that item such as Macintosh HD/Users/myuserfolder/documents. This does not happen in Lion.