Payment Date is Above the Cumulation Window

Hi gurus - We have a situation with a Canadian employee who was converted into our system as a retiree. The only payroll results he has are NAMCs for Year End adjustments.
We are testing an issue related to YE and are making NAMC entries on IT 0221 through tcode PAKY. Payment date = 07/31/2009. Error = Payment date 07/31/2009 is above the cumulation window (07/01/2007 - 07/31/2008). If I use a payment date of 07/31/2008 we don't get the error - understandably. But even if I successfully run an adjustment for 07/31/2008 and then try for the next year, 07/31/2009, I still get the error.
From what I understand, the program is basing the cumulation window on the last payroll resutls. However, in the CRT and TCRT in his last payroll results, he has cumultions for the year 2008 from the NAMCs that were performed for 2008 YE last year. That would lead me to believe that his cumulation window would have moved up (past 07/01/2007 - 07/31/2008).
Can anyone explain how SAP defines the "current cumulation window" and/or how to update the cumulation window to a more recent period?
BTW - the entry in T56C5 is set to 1.
Many thanks,
Christy

Hello,
You must enter a paydate within a given time range - the cumulation window.
If one control record is set too far back in the past, the cumulation window is determined incorrectly which leads
to the mentioned error message.
The solution should be:
Please ensure that the control records of all effected payroll areas are set to a period around a date of today.
(This is also valid for the control record of the non payroll relevant payroll area. If you delete this record, note 355889 has
to be applied.)
Also please check the following: Look at IT0000 and IT0001 and check all the records you find. Then check all the payroll
areas and look if any of them are not payroll relevant. Finally have a look at the payroll periods and find out if they were
correctly generated, if not generate them.
I hope this information helps you.
With Regards,
S.Karthik

Similar Messages

I cannot get the info bar (not the dock) on the top of my screen to permanently appear without my having to put the cursor on top of screen. Then it appears. Don't even know what that is called...above the open window.

How do I get the area above the open window to display information (as in closing that specific window, "Safari File Edit View History, etc.) without having to attempt to put the cursor on it to give me that info? I am not referring to the dock which is at the bottom of my screen. Although,It too, is not visible.
They were both visible before today.
Sorry, but I have no clue as to what this topic should be.

When you do Safari to it's maximum size on the screen (with the two little arrows in the Safari top menu bar on the right), Safari will take the whole screen including the top Apple menubar. In that menubar is the same set of little arrows to bring Safari back to it's previous size (which you can set by moving it's borders), you bring the Apple menubar in sight by moving the mousepointer to the top of the screen, when you do not want to loose that apple menubar, you can set Safari as bog as you can by moving its borders but just until below the apple menubar. Don't touch the little arrows in Safari menubar.

I upgraded Firefox, and now there is a blue band on my screen above the window, and I'm not getting the full use of the screen in viewing web pages. How can I get the window to expand to fill the screen as it did before?

There is a horizontal band or gap above the Firefox window at the top of the screen, where you can see the Windows desktop behind the Firefox window. On the left side of this band are the window tabs, and the menu bar, and another bar with the names of the open windows. I would like to have the Firefox window expand to fill the entire screen, like it did before the upgrade. Thanks.

Do you mean running Firefox in full screen mode?
*https://support.mozilla.org/kb/how-to-use-full-screen
If you are in full screen mode then you can hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
*https://support.mozilla.org/kb/how-to-use-full-screen
You can also run Firefox in a maximized window to have easier access to the Menu bar and Navigation Toolbar.

When I imported my photos to iphoto 11 from an external drive they were no longer chronologically organized in folders by year & month. In fact, it changed the dates & years of the files so I can't even manually organize them.

When I imported my photos to iphoto 11 from an external drive they were no longer chronologically organized in folders by year & month. Instead, they all went into one folder within a 2011 folder. In fact, it randomly changed the dates & years of all the files so I can't even manually organize them now.

Are you sure that iPhoto is the app for you?
iPhoto is designed to help you organise your Photos, but you seemed focussed on organising files.
The idea is simple: organise them as you want in the iPhoto Window. As I said above, as you never access the files on the HD then how iPhoto stores them is of no relevance. (It's by date of import BTW).
Where are you seeing these changed dates? In the iPhoto Window ? Somewhere else?
Regards
TD

No Payment data message in Payment Schedule Report (S_ALR_87015205)

Dear All,
I am getting the message "No Payment Data" when I am executing report S_ALR_87015205 in Money Market, when there is payment data existing for the given selection criteria, i.e., company code, product type and date range.
Any clues would be helpful.
Thanks in advance
Regards
Komal

Hi Komal
Could you please check the settings for payment relevance for update types are configured in your system? You can define the relevance for each payment that you want to be shown in the report in customizing under:
Financial Supply Chain Management
-> Treasury and Risk Management
-> Transaction Manager
    -> General Settings
      -> Information System
        -> Payment Reporting
          -> Definition of the Payment Relevance of an Update Type
I hope then data is displayed for you.
M Trein

Last payment date shown in credit master sheet is wrong.

Hi,
The last payment date and amount in the credit master sheet S_ALR_87012218 does not reflect the true last payment info. As per the payment history list, there have been more recent last payments after the last payment date shown on the credit master sheet, however i dont know why the actual last payment info is not being shown on the credit master sheet.
Can someone help?

Hi
When running credit master sheet make sure you are looking into correct credit control area where the payment has been entered. I am sure to update credit master sheet you do not need to run any program, this report updates figure online (at the same time). If you want to make sure its working take any customer having outstanding invoice on account. Make entry using transaction F-28, go back to credit mast sheet correct credti contrl area and you will be able to see updated amount.
I don`t know what t.code you are using to do incoming payment entery? Balance will not be updated properly in the reports if you are using wrong posting keys. Posting Key should be 15 inorder to update correct balance on customer report.
Hope this will help

Compensation with changing payment date

Our customer has to close a lot of incoming invoices through Compensation process (close in the same time some incoming and some outgoing invoices of the same party). We plan to solve that through payment batch: the invoices will be selected and the batch will wait (will not be confirmed) till partner confirm compensation. But, very often, in the moment of confirmation, payment date has to be changed because it has been agreed differently with Partner Company.
EBS doesn't allow changing payment date in a payment batch.
May we create a procedure (concurrent request) to change payment date in a not confirmed payment batch? (Payment date is CHECK_DATE in AP_INV_SELECTION_CRITERIA_ALL). We know that we have to update also PAYMENT_DATE in AP_SELECTED_INVOICE_CHECKS_ALL.
Is there anything else what we have to change together with previously mentioned?
The procedure will be applicable only for payments in functional currency.

hi frane,
we cannot manipulate the data in apps tables other than interface tables provided by EBS.
if the payment date is not the value date for bank, then you can leave it as it is. if it is so important, modify your payment format program to change the date while creating the bank payment file for banker. as far as payment date on the unconfirmed batch it will stay the same and should not make any difference as long as the confirmation of the payment batch is not crossing the payable period.
thanks,

Pop up window goes to the back of the main window in Swings on Solaris 10

I am using a Swing Application using Java 1.6 on Solaris 10 machine.
Whenever I click on the button which pops up another window, it always goes to the back of the main window.
Then I ll ve to minimize the main window to make the pop-up window get the focus.
I am using Exceed to open up Swing application.
But when the same application is run on Windows XP machine, the problem does not come up.
i.e. Pop-up window always get the focus and is visible above the main window.
Please help to figure out whether this is an issue with Solaris 10 machines or with java 1.6.
Thanks in advance
Regards
Sam

Hi, I am using a simple JDialog Box and using show() API to open that JDialog box.
Here is the code snippet:
loggedInUsersDialog = new LoggedInUsersDialog();
JDialog dlg = (JDialog)loggedInUsersDialog;
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
Dimension frameSize = dlg.getSize();
if (frameSize.height > screenSize.height) {
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width) {
frameSize.width = screenSize.width;
dlg.setLocation((screenSize.width - frameSize.width) / 2, (screenSize.height - frameSize.height) / 2);
dlg.setModal(true);
dlg.show();

GL date different from Payment Date

Dear All,
I got problem related to Oracle Payables. I wonder how this happen. The problem appears as below:
In practices, GL Date will default to be same as Payment Date. Suddently the GL date had changed to 1st dec (which is suppose to be 4th Nov). I had checked one payments at TEST instant, GL Date & Payment Date are same (eg: Payment date=04-NOV-2008, GL Date=04-NOV-2008). However, when check the same payment at PROD instant, GL Date previously generated on 4-NOV-2008 had changed to 1st Dec 2008.
Is it possible to change back the date to the original date which is the Payment Date?
Please advices
Thank you.

Dear All,
Just to share explanation received from Metalink FYI;
A : As per standard functionality, once the transactions are sweeped to next period the date will also change to 1st day of next open period. So if the invoices for which the GL date has changed in production are the one which were found in unaccounted transaction report during period closure process, then this is intended functionality.
Q : Is it possible if we disable the function, so that the GL Date will not change to next open period when sweep activity is done.
A : The reason for including this functionality is to facilitate the period end closure process even when all the transactions are not complete in AP. The system warns you to either correct and complete the transactions in current or Sweep them to next period. If you disable this feature you cannot close the period as unless you complete all the transaction in Payables. This is not advisible. Rest would be the business decision.
Thank you.
Regards
Edited by: mish on Dec 24, 2008 5:29 PM

Printing totals at the end of the main window?

Hi All,
This is Hr related and the data displayed in the main window is regarding the five benefit plans. I need to add the values from each plan. But the number of plans displayed is not constant. The plans for which he is eligible are displayed. So I need to display the totals after completion of the data.
I want to print totals in the main window at the end of the form. The print program is a standard SAP program and it is not to be changed. I had calculated the totals by calling a perform in the script editor. Thats working fine.
But the problem is while displaying it. Is there a solution to print totals at the end of the form without changing the print program or without creating a new element(as it cannot be called from the print program)?
Thanks
Satish

See there are so many element which ends with the ATLAST, like INVEST_AT_LAST.
You need to find out which AT_LAST is triggering in your prorgram. Or, you can use the AT_LAST element of the same family where you put your PERFORM to get the total.
Say if you put your code at BENEFI_AT_EACH_PERSON, you can use the BENEFI_AT_LAST for displaying the TOTAL.
Hope it helps..!
Regards,
Naimesh Patel

Passing data to another page loaded in the same window

How to pass data from a page to another when new page loading
takes place ?
I use :
window.htmlLoader.load( new air.URLRequest("app:/" +
htmlfilename));
I tried :
window.htmlLoader.addEventListener(air.Event.CHANGE,
passmonitor)
but it doesn't work !

The problem is in passing the variables . As I mentioned
above,, the following error message gets displayed:
Can't get property window from undefined value
The code I tried is
myloader = window.htmlLoader.load(new air.URLRequest("app:/"
+ filen ));
myloader.window.somevar = "data";

Refresh only page item while submitting data from the popup window

Hi All,
I'm pretty new to Apex .....
I have a form with text items as first few entries and then a radio button list and few text items again. On selecting certain radio button I have a popup window which acts as an interface for the next text item in the calling page. The purpose of having the popup window is that the text item following the radio button takes the input with certain character delimiters along with the data. Instead of using delimiters while entering the data I want a meaningful data to be keyed in the popup window and all the string operation to be done as a background process. I have been successful this far. I'm using the below javascript on click of the submit button.
javascript:doSubmit();
window.opener.doSubmit('REFRESH');
window.close();
On doing this I'm losing the values submitted for the items prior to the radio button(including radio button). Please note, I have a dynamic action set on page load to reset the values. Is it possible to refresh just the page item from the popup window.
Also, I tried excluding the window.opener.doSubmit('REFRESH'); from the above javascript. It sets the item with the expected value (viewed it in the session items, however I would like to view the concatenated string on my calling page) but following this there is an insert operation which uses all the necessary items in the form. All values except the value returned from the popup window is populated into the table. Am I missing something.
Any help in this regard is appreciated.
Thank you!!!
Regards,
Ganesh

Value set using Javascript is only in your browser page but is not yet available in the session. This is why the report doesn't return the expected output.
Before refreshing the report you would need to set the session state of this item.
You can set it after you assign the item a new value or before the report is refreshed
For Interactive Reports, this is available built in
you can go to Report Attributes >Advanced Attributes -> Page Items to Submit and specify P2_X1 for the field(and any other page item that the report is dependent on)
For standard reports, you can create a Dynamic Action that is triggered "before refresh" of the report's region, and choose PLSQL as the action types, give a dummy BEGIN NULL END; for the code and specify this item name in the page item to submit field so that it sets the items's value in session.

Can Bootcamp and Parallels share the same Windows applications and data?

I'm looking at getting an Intel iMac which will let me throw away my old PC - Yeah!
I will have a couple of Win apps that I will need to hang on to (Quicken - Quicken for Mac is horrible, but that's another tghread). Anyway, can Bootcamp and Parallels share the same Windows applications and data?
My thought would be to allow my wife to access Quicken from Parallels and not have to reboot. She will only need lightweight access and the overhead of running virtualization wouldn't impact her. I, on the other hand, would want to occasionally boot natively into Windows and run the same application with the same datafile. Is this possible?
Thanks and looking forward to joining the MacIntel world!

Thanks for all of the freplies. I suspected that BootCamp and Parallels could not shar ethe same partition, but wanted to verify. To address some of the other posts:
Re: Quicken vs MoneyDance - I looked at MoneyDance a while back and while it is comparable to Quicken for Mac, it isn't comparable to Quicken for Windows (ergo, Quicken for Mac isn't comparable to Quicken for Windows!). But, as I said, that is a topic for another thread!
Re: Using Bootcamp/Parallels for only one app: I actually have several apps that I still need access to on Windows. I work with many business applications than only run/are supported on Windows as well as receive some complex Office documents which Office for Mac cannot handle. Quicken (for Windows 2007) was just the best example of a consumer app where I could see wanting access from both OS X and Windows.

How to pass the data from a pop up window to the parent window

Hi All,
I have a jsp page which contains a add button, while clicking it a popup will come out(which is a another jsp page). There are some input fieldsand a submit button. Now how could I send the data from the pop up to the parent winow. Also I have to check that if the pop up is open and I click add button then another pop up must not open.
Plz reply its urgent
Thanks and Regards
Rajib Sharma

Thanks for the reply
But it not worked
I have a jsp page and the popup is also a jsp page the data that is passed from the popup window to the parent must be send to the server from the parent window to get a data from the data base as search result. Its of no use to get it as js data
Thanks and regards
Rajib Sharma

How to do import data from the text file into the mathscript window?

Could anyone tell me how to do import data from text file into mathscript window for labview 8?
MathScript Window openned, File, Load Data - it has options: custom pattern (*.mlv) or all files.
Thanks

Hi Milan,
Prior to loading data in Mathscript Window , you have to save the data from the Mathscript window (the default extension of the file is .mlv but you can choose any extension). This means that you cannot load data from a text file that was not created using the Mathscript window.
Please let me know if you have any further questions regarding this issue.
Regards,
Ankita

Payment Date is Above the Cumulation Window

Similar Messages

Maybe you are looking for