Payment Document Screening for SPL

Hi Guys
I am facing some issues in doing Synchronous payment document screening in GTS.
1) Is there anyway to recheck financial documents - Same which we do for Logistics documents via /sapsll/cuhd_mr_spl
2) Is synchronous checks possible? Like the Purchasing docments where system will let you know as soon as you create a PO.
While i am checking the Log its showing unable to determine active Legal regulations, this is only being shown for Payment documents.
The scenario here is we create proposals and instantly do a Payment run, so synchronous check is very essential for us.
Thanks
Carl

Hello Carl,
1) You can use /SAPSLL/SPL_BLRL_FI --> Manually Release Blocked Payments, which enables you to perform again SPL screening.
2) Synchronous screening can be set in IMG --> Global Trade Services --> Compliance Management --> Sanctioned Party List Screening --> Activate Business Partner at Business Partner Function Level
Here you can set MKK (contract partner) or SLLBNK (Banks) for synchronous. Response form GTS you will seen in Proposal Log (F110 transaction in feeder).
3) For activation of Legal regulation check whether your legal regulation is active for your relevant country.
Cheers,
Gabriel.

Similar Messages

Document Parking for Spl. GL Transactions

Hi!!!
I am trying to Park Document where in one line item Spl. GL Indicator is used.
System is giving Error Message where it says -
You have selected a posting key with a special G/L indicator of type 'Bill of exchange', or 'Down payment'. Document parking is not defined for special G/L transactions of the type 'Bill of exchange' or 'Down payment'.
Is there specific setting where we have to define Document Parking for Spl. GL Transactions?
Thanks & Regards..
Ameya...

Hi Anitha,
SAP does not plan to develop document parking with special G/L indicator for down payments.
It is not possible to park any FI documents that contain a line item for down payments as it is not developed.
As in standard R/3, the standard function is as follows:
You can park data relating to customer, vendor, G/L and asset accounts There is an additional fast entry function for G/L accounts. Both tax information and special sales can be parked. However, no special sales resulting from bills of exchange or down payments can be parked.
The above documentation can be found via R/3 Library > AC - Financials > Accounts > FI - Financial Accounting > Accounts Receivables > FI Accounts Receivable and Accounts Payable > Document Parking > Parking documents : Overview > What data can you park ?
Regards
Ravinagh Boni

Table for SPL screening date

Hi All
We are trying to prepare a report that consists requires give output business partners that are screened for SPL for a given period of time.
please provide tables or logic to get this done.
Thanks for your time.
Thanks & Regards
Karthi

Hi Karthi,
Why not use the standard SPL Audit Trail report for Business Partners?
Transaction /SAPSLL/SPL_AT_BP_LO
Program /SAPSLL/SPL_AUDITTRAIL_BP_LO
The main table for the audit trail reports is /SAPSLL/SPLAUD.
If you feel like this report does not meet your requirements please state why and provide more information on the exact data you need.
Best Regards,
Eoin

How to assign voided cheque to the new payment document no.

Hi Experts,
A cheque no 11111 was manually assigned to a payment document no. created for a vendor X but physically another cheque no. 22222 was issued to vendor X by mistake. Later on the user issued the cheque no. 11111 phisycally lying with him to vendor Y but did not assigned this cheque to vendor Y's as this was previously assigned to vendor X. When the user came to know this, he reversed the payment document no. by voiding the cheque no. 11111 with void reason ''Inserting wrong cheque lot'' and created another payment document no for vendor X with cheque no. 22222. This way he corrected the vendor X payment document with cheque no. 22222. Now he wants to assign the cheque no. 11111 which is voided to vendor Y's payment document. Further he has issued many cheques from the cheque lot which contain the cheque no. 11111 and 22222.
Is there any way to assign the voided cheque to the new payment document no as the user wants it very desparately.
Hoping for solution.
Rgds,
BABA

Hi Shailesh,
Use FCH5 to create check information. Enter thr payment document , Company Code, Fiscal year and the house bank information to assign the check. IF the check lot having the check number has further checks assigned from it, this check lot has to be made non-sequential so that we could manually assign the check number.
Thanks & Regards
Preeju Susan

Payment document reversal

Hi,
Am doing payment document reversal for normal company code.document using function module
Point1;
CALL_FBRA (am passing BUKRS,AUGBL,GJAHR) executing fine but unable to grap the REVERSE / RESET fields)
please let know we will i get reverse aand reset??
Pooint 2:
For cross company code am using , CALL_FBRA for reset. And for reverse i came to know their is another function module
(Please let me know the FM, i think from FBU8, but unable to identify).
It would great help one who help on this.

Hello,
Function module J_1B_FBRA_POSTING_AUFRUFEN reset and reverse clearing document.
I hope tihs FM helps to you.
Regards,
Burak

Payment Document in F110

dear all expert,
i run F110, but when payment run no payment document display for that transaction..can anybody tell me how to show that payment document in Payment proposal? cause i want to update text field in payment document to input check number?

Hi,
In payment proposal, the payment document number does not come.
Payment document number comes, only when you have done payment run. (You can see that payment list from F110 > Edit > Payment Run > Payment List.)
You can get the list of the payment documents from there or from table REGUH in transaction SE16N and can update the value via transaction FB02/ FB09
Regards,
SDNer

Two payment document one cheque

hai,
i made two payment documents. shall we take one cheque for this two document. is it possible or not.
govind.

Hi Govind
What u r asking it is not possible
but u can create two check lots by using prefix and suffix
i.e. if your original check no. is 955001
then assign the same to one payment document
and then create a new check lot with <b>955001.</b> dot is your suffix
and then assign the same to your second payment document.
but for this initially you have to make the error message for using prefix or suffix as warning message by using OBA5 where you have to give message class i.e. FIBL and message no.
your problem gets resolved.
Sayu

Update form Marketing Document screens from one user to other

I know there is a query somewhere where I can set up all Marketing Document screens for a user then copy it to other users so their Marketing documents have the same look and I don't have to go through each user.
Does anybody has that query? Thanks

Hi Rosi
A query would imply some sort of direct write to SAP tables and that is not wise. You could rather have a look at the DI API or DTW templates for updating user defaults. If I recall correctly it is called UserMenuService.
Kind regards
Peter Juby

SPL screen for FI payment docuemnt

Hi,
SPL acreening for Financial accounting is working for limited transactions. Vendor payment document with check printing and F110 payment proposal is working fine.
But with customer paymenr receipts, Manual payment document creation through F-28 is not blocking though the customer is blocked in GTS system. Will SPL screening limited to few transaction codes in FI? Do we need to do some enhancements to activate SPL screening at F-28?
Regards,
Lakshmikanth

Hi Frances,
I think you've mis-understood a little. The values for mapping are already in your note. Those values are hard-coded in the ERP system, and you simply have to map them to associated values in GTS.
Let's take Document Type. If you want to use the standard GTS document type 'IMPORD' for your compliance checks on incoming payments, then you will need to create an entry to map ERP type FIIN to GTS type IMPORD. But probably you will create your own GTS Document Type for FI postings - it's your choice.
Same idea for Item Category. The ERP system always sends the FI data with 'FI0A', so you could map that to GTS Item Category 'IMORD1', or to the one that you create.
For Partners, you can map through whichever ones you want to check. Here's the list of the partners that are sent from ERP:
FIKRE = Vendor
FIPAY = Payee
FIDEB = Customer
FIREG = Payer
FIPAB = Bank
FIACO = Account Holder
FIOTP = One-time payment
I think those same Partner Functions exist in the standard GTS system, so your mapping is simple (e.g. FIKRE = FIKRE).
There is not much more that I can tell you, but if you continue to have problems, please come back.
Regards,
Dave

I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the "Recommendation Report" screen, I clicked "Non-Included Trans." and saw that one of the vendors (Vendor Code: WILCO) has the followi

Hello,
I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the “Recommendation Report” screen, I clicked “Non-Included Trans.” and saw that one of the vendors (Vendor Code: WILCO) has the following error:
“The document amount is greater than the max. amount allowed in the payment methods linked to the BP”
Upon checking, the “PCF-W” Payment Method linked to WILCO does not have any restrictions, nor does WILCO have any credit/commitment limit set. I have also appropriately defined the Dummy Business Partner Bank (under Payment Terms) as well as checked the “Included” box for PCF-W on the Payment Run-Payment Methods screen.
Could anyone please help me on this?
Salamat,
Cat

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Creation of batch input session for mass reversal of payment documents

Hello FI experts,
There is a business requirement in which the users want to reverse the payments en-masse. This can be achieved by creating a batch input session via a custom program to upload the documents from excel . Then calling FBRA and FB08 to do the resetting and reversal.
My issue is how to create the batch input session ? Please help.
Regards,
Van

Hi,
I have got developed such program earlierr.
You can define your custom program specification as below:-
(A) Based on the selection screen, the program will read all the records (field document number VBLNR, company code ZBUKR and year from field ZALDT) from table REGUH. (Proposal Run Indicator XVORL should be blank.)
(B) If Paying company code (REGUH-ZBUKR) is equal to Sending company code (REGUH-ABSBU):-
       Step 1:- For each record of (Payment Document Number (REGUH-VBLNR), Company code (REGUH-ZBUKR), and Fiscal Year (REGUH-ZALDT)) it will call transaction FBRA and will reset the clearing of the document.
       Step 2:- Then call transaction FB08 and pass the data as below:-
              Document Number     =     Payment Document Number (REGUH-VBLNR)
              Company Code     =     Company code (REGUH-ZBUKR)
              Fiscal Year               =     Fiscal Year (REGUH-ZALDT)
              Reversal Reason, Posting Date and Posting period will be defaulted from the selection screen of out program.
(C) If Paying company code (REGUH-ZBUKR) is not equal to Sending company code (REGUH-ABSBU):-
       Step 1:- For each record of (Payment Document Number (REGUH-VBLNR), Company code (REGUH-ZBUKR), and Fiscal Year (REGUH-ZALDT)) it will call transaction FBRA and will reset the clearing of the document.
        Step 2:- for each record of (Payment Document Number (REGUH-VBLNR), Company code (REGUH-ZBUKR), and Fiscal Year (REGUH-ZALDT)) get the cross company code document number (BKPF-BVORG) and
               (ii) Then find out the Document number (BKPF-BELNR) from BKPF matching BUKRS = Sending company code (REGUH-ABSBU) and GJAHR = Fiscal Year (REGUH-ZALDT) and BVORG = cross company code document number (BKPF-BVORG) as obtained above in
              (iii) Then call transaction FBRA and will reset the clearing of the document passing BKPF-BELNR, BKPF-BUKRS and BKPF-GKAHR as obtained in (ii) above.
       Step 3:- Then call transaction FBU8 and pass the data as below:-
              Cross CC Doc. Number=     Blank
              Document Number     =     Payment Document Number (REGUH-VBLNR)
              Company Code     =     Company code (REGUH-ZBUKR)
              Fiscal Year               =     Fiscal Year (REGUH-ZALDT)
              Reversal Reason, Posting Date and Posting period will be defaulted from the selection screen of out program.
Regards,
Gaurav

Screen exit Payment document saved when press enter after error message

Hi All,
I have created a screen enhancement for payment document WZR1.its in additional data tab under header details.
Here i should populate a error message when user save the payment document without entering values to custom screen fields.It works fine with Function exit LWZRE017 . It populated the msg and the screen is disabled but after when i press enter button the document is saved and created.
please let me know how to stop saving the document without entering values in custom fields.
Thanks,
Arun kumaran.
Edited by: Arun Kumaran on Mar 4, 2010 12:09 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:26 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:43 PM

I found the fcode when enter is 'ENT1' it is from standard screen program.
I populated the same message when UCOMM = 'ENT1' still not working.
ARUN KUMARAN.
Edited by: Arun Kumaran on Mar 5, 2010 1:36 PM
Edited by: Arun Kumaran on Mar 5, 2010 2:11 PM

Special Scenarios for spl screening A1, A2, B1, B2, c1, C2 and C3

Hi Experts,
Can any one explain about the special senarios for SPL screening like A1, A2, B1, B2, and C1, C2, and C3.
I have little bit confuse when we use these scenarios can any one explain in details if possible.
Thanks in advance for who explain briefly

Hi Hari,
Below are the brief points on the scenario's that you just asked to be described.
A1:- SPL screening done during transfer itself i.e. immediately or synchronously for GTS business Partners against all SPL files
A2:-SPL screening done during transfer itself i.e immediately or synchronously for GTS documents for partner addresses against all SPL files
B1:-Periodic Screening done against all SPL files for GTS Business Partners
B2:-Periodic Screening done against all SPL files for GTS Documents for Partner Addresses
C1:- Periodic Screening done aagainst Delta SPL files for GTS Business Partners
C2:-Periodic Screening done against Delta SPL files for GTS Documents for Partner Addresses
Apart from these, there are other scenarios as well. Which are as follows.
S1:-SPL screening done during transfer itself for GTS business Partners against all SPL files but in simulation mode
S2:-SPL screening done during transfer itself for GTS documents for partner addresses against all SPL files but in simulation mode
These above 2 are similar to Scenario A1 and A2 but in simulation mode.
But I am not sure about the C3 scenario asked above. Probally other experts can put a light on it.
Regards,
Aman

Unable to find partner function for SPL screening

Hi Guys
We are trying out the SPL functionality for our Client, We are in the Preliminary stages and have just started the Intial Configuration
The problem comes is the Document in ECC is getting blocked and is working as per functionality
But when in come in the GTS system and check the Documents via (SPL > Display all Documents) in the overview menu, and go ahead and check the Log, it shows an error stating
"Unable to find partner function for SPL screening"
I have checked the configuration and The partner structure, Functions and Assignment are all done
Can the experts help in getting a small checklist which I should do a check through in the configuration/user side, which can trigger this error message?
Thanks
Regards
Carl Ray

Hi Carl,
Did you load the SPL List for Screening? Prior to SPL Screening, we have to create Index for SPL Screening. Please follow the following steps and then re-check the document
SAP GTS Area Menu (/SAPSLL/MENU_LEGAL) -> Sanctioned Party List Screening -> Master Data. Perform the below steps in sequence.
Step 1: Reset Buffer
Step 2: Generate Comparison Terms
Step 3: Aggregate Comparison Terms
Step 4: Comparison terms for Business partners
After doing the above steps, then do the following step
SAP GTS Area Menu (/SAPSLL/MENU_LEGAL) -> Sanctioned Party List Screening -> Logistics -> Check against updated Sanctioned Party Lists -> Check Business partner addresses
After performing the above steps, then re-check the document.
Let me know if the above solution help or not
Regards
Pradeep

F110 - each item in each payment document for the same vendor

Hi Guru,
When i use F110 to do auto payment run for one vendor, each item is paid by each payment document although the document currency is the same, do you know why it appear like this, by right, all the vendor open items should be paid in one payment document, what is the possibility for this scenario, how to check it.
thanks,
Kick

There are things that you should check which may be causing this:
(1) In the vendor master (FK03) go to the section "Payment Transactions Accounting" and see whether the box "Individual Pmnt" has been selected. If it has, then deselect it.
(2) In transaction FBZP go to the "Payment Methods in Company Code" section, double click on the relevant payment method, and check whether the box "Single Payment for marked item" has been selected. If so, deselect it.

Payment Document Screening for SPL

Similar Messages

Maybe you are looking for