Payment in other than functional currency and bank currency

Hi
I am working in a implementation project, i am facing one issue related to multiple currency transaction.
client is maintaining one bank account(USD) in other than functional currency(INR), that account they are using for making a payment in USD or other than USD(third) currency, so in case of payment held in third currency, conversion will happen between USD to third currency, hence there is no functional currency is coming in conversion and at bank account level multiple currency check box can not be enabled due to bank account currency is other than functional currency.
Could you please help me out on this issue.

Hi Kiran
Thanks for your reply
I am required Little more help on this, please find the bellow example
Example
Ledger/functional Currency is INR
bank currency is USD
Currency conversion rate has been defined for the currency
invoice is created in GBP, payment need to be make in GBP currency from USD account, because USD$ use for the GBD conversion, now my concern is bank is in USD currency that is other than functional currency, hence multi currency check box can not be enabled, since functional currency is INR so all transaction should be convert to INR for accounting and as multiple currency not allowed at bank therefore enable to make payment from same bank.
Thanks
Tarun

Similar Messages

Inventory Value other Than Functional Currency

How can we keep Inventory Valuation in Non - Functional Currency ?
Scenario
Ledger Currency = KES, Majority of the business for the client is from Exports, as the procurement happens in USD the can we retain the cost of the product in USD ?

Hi Kiran
Thanks for your reply
I am required Little more help on this, please find the bellow example
Example
Ledger/functional Currency is INR
bank currency is USD
Currency conversion rate has been defined for the currency
invoice is created in GBP, payment need to be make in GBP currency from USD account, because USD$ use for the GBD conversion, now my concern is bank is in USD currency that is other than functional currency, hence multi currency check box can not be enabled, since functional currency is INR so all transaction should be convert to INR for accounting and as multiple currency not allowed at bank therefore enable to make payment from same bank.
Thanks
Tarun

Automatic Payment F110, Using currency other than the currency of invoice.

I want know if it is possible to make automatic payment by F110, paying through a currency other than the currency of the invoice?
Using the f-53 transaction i know that is possible, but i must use the F110, because I generate a file to send to the Bank.
Thks,
Fernando

Invoice Booked for USD but payment want INR through F110, Cheque printing.
Christoph Gilberg Mar 26, 2015 8:27 PM (in response to Sam P)
Hi Sam,
you have to add this information at the time of invoice entry. Screenshot from F-43 below.
Best Regards,
Christoph

Easy Cost Planning in a currency other than Cont Area and comp code curren

Hi,
I want to do the easy cost planning in a currency which is other than controlling area and company code currency.
But I am getting the option of only these two currencies only.
Any idea how to do it?
Example:
Controlling Area currency :INR
Company Code Currency : AED
Planning Currency to be used for Easy Cost Planning :USD
Regards,
B P Singh

Hello,
You may try to go to transaction CT04 - Characteristics. There in tab BASIC DATA you choose Data Type - Currency Format. In field Currency enter the required currency. Save the characteristic.
Next step is to go to CKCM - Models for Easy Cost Planning. Open the Costing model and add line with the created characteristic.
Good luck, Aleksandra

Drawing with an effect other than Alpha Transparency and XOR

Hello,
I'm looking for a way to draw images (Or anything else for that matter) with simple effects other than the Alpha and XOR effects, such as Multiply, Subtract and Bitwise AND. I've realized it has something to do with the setComposite function, but I haven't figured out how to get further from there, and the documentation didn't seem very clear. This is my first time using Java fro anything graphical; most of my projects are done in PHP and C++.
Could anyone help me with this, perhaps with an example?
Thank you very much!

I'm using Graphics2D. I have one big BufferedImage and other smaller once which I use as sprites. I'm rendering the sprites to the big buffer using drawImage. I need an efficient way to render some of the sprites with an ink effect such as subtract. I know it's possible to do it with a XOR effect by placing setXORMode(c1) before the drawImage function.

Everytime i click on the view in itunes button/link on the itunes website so that i can download apps, nothing happens. I accendentally clicked on the button other than open itunes and now i cant fix it

everytime i click on the view in itunes button/link on the itunes website so that i can download apps, nothing happens. I accendentally clicked on the button other than open itunes and now i cant fix it

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sifnout and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
- Restore from backup via iTunes. This will install a fresh copy of the iOS. See:
iOS: How to back up
- Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone?

I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone? I don't really need a paper weight.

No not jailbroken. After the update which took about 45 minutes. The phone went black. Dead. Wouldn't restart. Using the new itunes I tried to restore it. It went through the motions; the white Apple and progress bar appeared on the iphone screen. Then I got a message "Itunes has detected an iphone in recovery mode. You must restore this iphone before it can be used with itunes." Then the phone went completly dead again. I Repeated the process and got the same results. Is there another way to restore the phone if it's dead, besides itunes?

Report showing GL Accounts with document posted in currency other than local currency

We need a report that shows all the GL Accounts that had a document posted in currency other than local currency during the month. The purpose of such a report is that we should not miss any Foreign Currency Gain or Loss at the end of the month.
Is there such a report already in Standard SAP ? Please let me know. Points guaranteed.

Hi Ajay sir,
It's never be a bad idea. But I think Rajeev might be looking for a stright report than work around, which is not available.
Regards...
Jose

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.
Actual accounts & contacts need to be route around 2000 & 3000 but we have observed lakhs of records routing into local DB.
We have verified all the Assignment Rules, Views.
We ran docking object visibility rules and we have observed that some other accounts are routing due to Organization rule passing. (these records are not supposed to route).
Version Siebel 7.7.2.12,
OS Solaris.

let me know what would be the reason that 1st million takes only 15 minuts and the time goes on increasing gradually with the increase of dataYes that's a little strange. I only can guess:
1. You are in archivelog mode and the Archiver is not able to archive the redo logs fast enough
2. You don't use Direct Load and DBWR ist not able to write the direty block to disk fast enough. You could create more DBWR processes in that case.
3. Make a snapshot of v$system_event:
create table begin as select * from v$system_event;After the import run
create table end as select * from v$system_event;Now compare the values:
select * from begin order by TIME_WAITED_MICRO descwith the values given you by
select * from end order by TIME_WAITED_MICRO descSo you can look where your DB spent so much time waiting for something.
Alternativly, you could start a 10046 trace on the loading session and use tkprof.
Dim

I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

go to settings
then to store
tap your id then click sign out
then sign back in and you should be fine

I have upgraded to Mac OS X v10.7 Lion and when I log into mail I can't find my mailboxes other than inbox, draft and sent how do I get my other mailboxes back?

I have upgraded to Mac OS X v10.7 Lion and when I log into mail I can't find my mailboxes other than inbox, draft and sent how do I get my other mailboxes back?

Lion is a bit of a memory hog - kernel_task will use quite a bit and Safari is known to use more; you can't do anything about the system, but changing to Firefox may help a little. The best way to deal with it is to increase your RAM; the required minimum is just that: the minimum. My Macbook would keep crashing and beachballing until I upped the RAM to 4 GB. RAM is inexpensive right now - check out OWC (macsales.com) or Crucial.com; both reputable RAM vendors with lifetime warranties. You won't regret it.
As for iDVD - I purchased the retail iLife 11 disk because of iDVD (because I use that a lot) - it's available at online resellers, the Apple Store, and ebay.

Has anyone experienced wrist pain with new mac computer...? if so what are suggestions other than warm up and cool down exercises..**

Has anyone experienced wrist pain with new mac computer...? if so what are suggestions other than warm up and cool down exercises..**

Very good advice but no one is asking for medical advice.... Was wondering if anyone had any ergonomic suggestions that may have worked for them.. ??

LC other than national currency

Hi All,
I have a customer who's national currency is SGD,but the according to the IRAS(Inland revenue authority of singaopre),
if 60% of the customer's transactions are other than the local currency(national currency) then the Local currency should be set as that Foreign currency(USD).
So i have proposed the customer to set LC as SGD and SC as USD.
Here GST reporting should be done in SGD.
So when there is a supplier invoice in USD the supplier will send the equivalent SGD for GST purpose.
But in SAP if we consider LC as USD and the corresponding SGD can be recorded only on the exchange rate table,where as the SGD rate will be varying according to the individual supplier invoice.
Is there any workaround available to record the SGD equivalent value in order to generate the GST report accordingly even the document currency is same as the local currency(USD is considered as LC)
Note:Customer is aware that if they maintain LC as USD they will not be able to revaluate USD curreny.
Kindly share you precious inputs on the above scenario
Regards,
Raja

Hi Gordan,
Now USD as configured as LC and SGD as SC.
When there are AP Invoices the exchange rate given by the supplier will vary ie.,AP invoice will be in USD and the exchange rate for SGD will also be provided for GST purpose.
But for USD the equivalent SGD will be taken from the exchange rate table,which we can not change as per the individual document for corresponding GST tax calculation in SGD.
Now as per your suggestion if it has to be manually adjusted then the Tax report also need to be customized accordingly if i am correct.
Regards,
Raja

SUB-Group consol. in different currency i.e. other than group currency

HI Friends,
Consolidation Group currency is "USD". In the consolidation hierarchy, i have one sub group where all the companies are in AUD.
Now the requirement is that australian sub group requires sub consolidation in AUD.
Currently we are doing sun consolidation and the results are as expected, but they are in group currenmcy "USD".
Is there any option to get the sub groupconsolidation report in AUD i.e. different than group currency.
Thanks in advance,
Regards,
Richard

Hi ,
Yes it is possible.
Direct in UCMON and change your group currency, but you must do again full proces consoidation in this group currenct, or in your query (query designer) you create a new report and use transaltion currency direct in report.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/62/f7e73ac6e7ec28e10000000a114084/frameset.htm
Please, read Consolidation in Multiple Group Currencies .
Regards,
anka
Edited by: Anka on Jul 8, 2010 4:37 PM

Payment in other than functional currency and bank currency

Similar Messages

Maybe you are looking for