Payment lot with Payment specification

Hi
I am trying to process a Payment Lot (FP05) using a payment specification (FPAY1B). After creating the payment specification and selecting it in the payment lot (J), the item is going to clarification with an error message that says "Status of payment specification XXX does not permit use".
Thanks
Allen

Update the processing status field on the Payment Specification.
Closed

Similar Messages

Manual inspection lot with out specification

Hi gurus,
can anybody give me an example for Manual inspection lot with out specification?
regards,
sbabu

Hi,
Actually it is not useful in manual inspection lot because manual inspection lot used to check your quality of material at any movement.
Means for example your raw material is in store department but some time you suspect something about quality & you take decision to check quality of material that time it can be used. So in this case result record is mandatary,
Because your intention to create lot to checked material so not use ful without specification .
Also not any posting happening through this lot.just to check the material at any instance.
For any further clarification revert me back.
Some time client want to create lot but do not want to take results for that just they are interested in giving
UD & stock posting in that case you can remove tick task list required .This requirement mostly demanded for certain Engg items they do not want go material directly to unrestricted. it will go through UD.
But manual inspection lot I do not think it much useful.
Regards
SANIL

Searching for inspection lots with a specific result

Hi,
Is there a way to search for an inspection lot or point containing a specific result?
Like show me all the inspection lots where characteristic "color" is entered as "red"
thanks,

Hi Alper,
To get it for specific material, there is an STD report available.
Try QGP1.
Regards,
Shyamal
Edited by: Shyamal Joshi on Jan 2, 2009 7:00 PM
Or there is an other way also but for that thing you need to strictly follow the below steps, without fail.
- Go to any inspection lot (T Code QA13) where this MIC's result is recorded. Ideally UD should be completed for this lot.
- In the "Characteristic" screen click on the "Chars relevant for usage decision", so it will display you all the results.
- Now click on the appropriate MIC. e.g. click on the MIC "color".
- Now click on the Result History or "Cntrl+F9".
- A small selection window will pop-up.
- Here there will be two main selections are available, 1> with Inspection Char. and 2> with Master insp. char.
- We need to "Master insp. char." activated (GREEN)
- Now at lower part of this screen there are four sub selection tabs such as Material, Object, Inspection lot, & time are available.
- In all the tabs a check box "Selection Active" is available, deactivate it.
- As soon as you deactivate it, the selection criteria will change into Yellow colored triangle.
- Noe Execute this selection.
- It will give you the data as you are looking for.
Pls revert if there is any query.
Regards,
Shyamal

Payment advice vs Payment Specification

Hi,
What's the difference between
Payment advice
FPAV - From Customer
vs
Payment Specification
FPAY1B - Create for Payment Lot
Thanks a lot,
Mario

Hi Mario.
FPAY1B (Payment Specification for Payment Lot) is used in combination with FP05 (Payment Lot). When running FP05 transaction, you can select J as a selection category (field PDKEY) and enter the created payment specification. That way you can define which open items are payed with the summary payment in the payment lot. Clearing control (20A) has to be maintained.
On the other hand, FPAV (Payment Advice Note, From Customer) can also used in combination with FP05, but with another selection category, for example L (field AVKEY).
When using Payment Advice Note (FPAV) you can choose the selection category and enter the value (for example contract, contract account or document number) (which is useful when a customer sends you a paper with the specification of the summary payment he did to your account), while when using Payment Specification (FPAY1B) you can choose among the open items for the selected criteria (which is useful, for example, when you want to group several payments into one summary payment and ask the customer to pay those open items).
Hope it helps!
Marko

Cannot open a a file with a specific file name

I have 1 person who cannot open or save a file with a specific file name on his computer. If he does it at another computer he is fine, no one else has this issue. The error he gets when trying to open the file is { Cannot create file:missingperson.pdf. Right-click the folder you want to create the file in, and then click Properties on the shortcut menu to check your permissions for the folder}
Any ideas on how to resove this. He gets this file sent to him on a regular basis, and cannot have the file name changed.
Thank you

I have run across something similar. Assuming that this PDF they are getting through email is the same name, then this is how I fixed my problem.
When you get a file in an email and open it, it writes that file to the Temporary Internet Files folder. Lets assume the file name is filename.pdf If you open a file from email with the same name at a later time, it creates a file called filename(1).pdf. Open a file with the same name again, it creates filename(2).pdf, and so on. Once you get to filename(99).pdf, it will start giving you a lot of trouble. When I cleared out those filename.pdf's, everything went back to normal.
Hope this helps.

Automation in saving a image file with a specific max file size

Hi everyone,
I hope someone can help me by this.
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
Any help is really appreciated!
Thanks in advance!
Kind regards
Packesel

*push*
Hi everyone,
I still need help with this. Is there any tool (OS X) or script for Photoshop who can fulfill this (see title).
ANY help is really appreciated!
Thanks in advance.
Regards
Packesel

Inspection Lot with Zero stock posting qty

Dear QM Consultants,
We have come across following scenario,
1.     Repetitive manufacturing
2.     Material has inspection type 04 and Z04. Preferred inspection type is not ticked. Z04 inspection type has been assigned to inspection lot 04.
3.     Production GR done by 131 movement
4.     Inspection lot generated with reference to 131 movement type. Lot for inspection type 04 is created.
5.     Inspection lot qty in QA32 it shows correctly as that of GR qty.
6.     But when we click on UD, in stock posting tab, qty to be posted it shows as ZERO. So no qty is available for stock posting.
Has anybody came across such scenario? Is this any bug? Any SAP note for this?
Best Regards,
Anand Rao

Dear Sujit, Thanks for so prompt reply,
Basically this is a complex case,
1.     See we have set Posting Proposal in Usage Decision as u2018To unrestricted useu2019 in selected sets for usage decision. That means we need not every time go to stock posting tab. The moment we select ACC UD code it automatically posts the stock to unrestricted use.
2.     Now, what has happed, by 131 movement declaration, backflush happened with 261 movement for child parts.
3.     Inspection lots with inspection type 04 were created. (Here we did not note whether the stock was posted in quality inspection or in unrestricted use)
4.     Now the requirement is to cancel 131 movement document. Kindly note UD were not given up to this moment.
5.     Now through MFBF, user did document specific reversal. As a result of which and as per my knowledge 132 movement should happen and 262 should also happen. At the same time inspection lot status should be set to LTCA. But in actual case 132 movement happened and 262 did not. Surprisingly inspection lot did not set to LTCA status. It remained in REL mode only.
6.     After this document specific reversal, user gave UD to these inspection lots without noticing where the stock was lying.(in unrestricted or in quality inspection). So the lot status set to UD   ICCO SPCO STUP after giving usage decision.
7.     Now while doing reverse engineering that why 262 movement did not happen, we came to know that no 321 movement happened for the inspection lots which were generated with reference 131 movement document
8.     Also, qty to be posted it shows ZERO as explained in my earlier post.
9.     When we display 132 movement document through MIGO, in where tab it shows stock type as Quality inspection. That means stock was lifted from QI for 132 movement.
In short it cannot be predicted where the stock was actually posted whether in QI or in unrestricted use. But yes the post to inspection stock tick has been ticked in material master.
Can you help further in this regard?
Best Regards
Anand Rao

Inspection plan with multiple specifications

I have to maintain 1 inspection plan for 2 vendors for incoming inspection.
Eg: Vendor A & B
Vendor A, I have to check parameter Fe, Mn, Si
Vendor B, I have to check parameters Fe, Moisture (For B, no need to check Mn, Si. Also Fe specification will vary for A and B vendors)
How can we do this in SAP. I cannot maintain 2 inspection plans.
Vineeth

Dear Vineeth
1) Dependent characteristic
For MIC 1000 - Vendor A specification 10 to 20, For Vendor B spec is 30 to 50
Suppose we receive 10 pc from vendor A , after GR inspection lot will be created from the 10 pc and the specification for MIC (1000) will be automaticaly assgined to the inspection lot ie 10 to 20. If the vendor was B then the specification would be 30 to 50.
In inspection lot there will be only one specificaton either it will be of Vendor A or that of B
2) In multiple specification is normaly used for Customer, country etc.
you have customer A , B , C & D with differnet specs for one single mic and you want to valuate the mic with all specification seperately at one time
In this multiple specification is used. here we can valuate the mic with all the specification of A, B , C & D and results in a seperate window in the result recording tab. accordingly you can check wehter the mic has passed as ok with all cusomter specification
Regards
Gajesh

I need to replace a color on my image with a specific color from another part of the image. How?!

I have spent over 2 hours trying to figure out how to replace a color on one part of my image with a specific color shown on another part of the image. So far I have been able to go to "Replace Color" on my Adobe Photoshop version, but it seems that I can only change the hue and brightness of the color that it currently is. I need to use a specific color so this does not help me. Does anyone know how to complete the task I am referring to?
Also, please keep in mind that I am using Adobe Photoshop 6.0, not a fancy cs version or anything. So it's pretty old school...
Any help/feedback is greatly appreciated! Thank you.

Hi brookehelene,
You might consider making a selection the object and using a color fill layer set to the color blend mode instead of replace color.
I used the same picture as kendallplant did and changed the color on the same flower by sampling the pink color from the flower to the right)
(click on the screenshots below for larger views)
1. Select>Color Range
   (i used color range because the dialog is somewhat similar to the replace color dialog, except one is making a selection instead of replacing a color)
   (there are many other ways to make the selection such as the magic wand, so if your more familar with the other selection tools you can use those instead to make your selection)
2. Use the eyedroppers and fuzziness slider in the color range dialog to make the selection of the object.
   (in the screenshot below the white areas are selected and black areas are not)
   (your selection probably won't be perfect, but you can paint on the layer mask to refine the selection)
3. After you press the okay in the color range dialog you'll see the selection (marching ants)
   At the bottom of the layers palette press the Create New Fill or Adjustment Layer icon
   to reveal a list and choose Solid Color.
   Then use the eyedropper to sample a color from your image and press ok.
   Change the Blend mode for the color fill layer to Color (top of the layers palette)
4. As you can see a lot has been selected besides the flower.
    To refine the areas of color, paint on the layer mask with the paintbrush tool.
    Use white to add the color or black to subtract the color
    You can press the D key on the keyboard to get the default colors (black and white) in the toolbox
    and press the X key to switch between the two when painting on the layer mask.
Even though the above takes longer you can easily change the color or modify the areas that you want to change the color on.
To change the color you can double click on the color fill icon in the layers panel.
You can also use other layer blend modes besides color such as hue, so you might try some of the others and see what they do.

I'm looking for a computer with these specifications, can anyone help me?

I need to know if anyone can give me the names of a few laptops that have these MINIMUM specifications:
Intel Pentium 4 or AMD Athlon 64 Processor or any better processor
4 GB of RAM
Windows 7
1280 X 800 or more with qualified hardware-accelerated OpenGL graphics card, 16 bit color, and 256MB of dedicated VRAM (not Shared Memory)
Graphics support for Shader Model 3.0, and OpenGL 2.0, DirectX 9-capable graphics card.
DVD-drive compatible with dual-layer DVDs, Read/Write drive
QuickTime 7.6.2 or newer
I'm going to an art school, and will probably be getting into some Graphic Design stuff, so if you don't know a computer that has a lot of these specific terms, could you give me perhaps a few names of good laptops for art students to buy?

Hello Balkoth,
I work for Intel and aside from this being my job, I'm going to tell you to consider investing in a stronger processor. If you are going to be getting into Graphic Design, you will need more processing power. For your needs, I would suggest looking into the new Intel® Core™ i7 processor.
This is our top-of-the-line processor, ahead of the curve and will continue to perform as technologies continue to emerge. Not only will you have graphics support for Shader Model 3.0, and OpenGL 2.0, DirectX 9-capable graphics cards, but the i7 has Turbo Boost Technology (Speeds up your processor when you computer needs more performance) and Hyper-Threading Technology (multitasking that allows your computer to work on two tasks at the same time). Even if you don't need all of these features now, you never know what you will need down the line. My general rule of thumb is to never buy something that is already behind the curve.
I would also recommend you looking into our other smart processors, i3 and i5, but I believe the i7 will be the best for your processing needs. Here is a couple computers I found with i7 processors and Windows 7 that you were looking for. Hope this helps!
Intel- Sponsors of Tomorrow
Dell Studio Laptop with Intel® Core™ i7 Processor - Black Chainlink
Model: S1747-3209CBK | SKU: 9718895
Watch your favorite movies in high-definition or create customized CDs and DVDs with this laptop's DVD±RW/CD-RW drive with Blu-ray Disc support. The built-in 2.0MP webcam and 17.3" high-definition plus display are handy for video chatting with friends and family. Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel.
4.7 Read reviews (65)
Sale: $949.99
Toshiba Satellite Laptop / Intel® Core™ i7 Processor / 16" Display - Slate
Model: A665-S6070 | SKU: 9992966
This laptop features an Intel® Core™ i7 processor, 4GB memory and a 640GB hard drive for fast computing and ample file storage. The 16" widescreen TFT-LCD display and NVIDIA GeForce graphics provide a crisp, clear picture.Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel. Take a product tour.
1 Read reviews (1)
Sale: $899.99
Apple® MacBook® Pro / Intel® Core™ i5 Processor / 15.4" Display - Aluminum
Model: MC372LL/A | SKU: 9911539
Video chat with friends and family using this laptop's iSight webcam with omnidirectional microphone and 15.4" widescreen display. Enjoy high-speed wireless access via the built-in AirPort Extreme wireless network connection.
5 Read reviews (5)
Sale: $1999.99
I am an Intel employee and state that my opinions are my own personal opinions and are not made on behalf, or to represent, Intel.

Quality Management - Insp lot with status CRTD CHDR SPRQ

I am not able to do usage decision for Insp lot with status CRTD CHDR SPRQ but I can do usage decision for status REL CALC SPRQ.
Can anybody know why ?

Hi
pl check the lot is assigned for inspectioon plan ore not.
got QA02 check in inspecion specification TAB.
If there is noe inspection plan (group)
you need to create a inspection plan, and then come to QA02
then you need clickon TAsk list/spec button in insp.specification tab.
Pl check and try
-ashok

Deleting emails with a specific subject from a single user mailbox

we are exchange 2007 on SP1. we do not have an edge server, only a hub server.
A user mailbox was flooded with 11000 "Undeliverable:" emails in the last 2 days, the source being "DSA". I am still finding out why this has happened. As for now, I have set up a rule to silently drop all emails with this specific subject.
now the user wanted our team to delete all of these 11000 emails from his mailbox.
we gave the appropriate permission to the users mailbox by running the command
Get-Mailbox -Identity “[email protected]” | Add-MailboxPermission -User [email protected] -AccessRights FullAccess -InheritanceType all
Then I ran the below command
Get-Mailbox -Identity “[email protected]” | Export-Mailbox -SubjectKeywords "Undeliverable:" -IncludeFolders "\Inbox" -StartDate "09/22/2014" -EndDate "09/23/2014" -DeleteContent -Confirm:$false
The command ran for a while, showing it was deleting 19000 odd emails with the below summary
[PS] C:\Windows\System32>Get-Mailbox -Identity "[email protected]" | Export-Mailb
ox -SubjectKeywords "Undeliverable:" -IncludeFolders "\Inbox" -StartDate "09/22/
2014" -EndDate "09/23/2014" -DeleteContent -Confirm:$false
TargetMailbox :
TargetServer :
TargetDatabase :
MailboxSize : 733800KB
IsResourceMailbox : False
SIDUsedInMatch :
SMTPProxies :
SourceManager :
SourceDirectReports :
SourcePublicDelegates :
SourcePublicDelegatesBL :
SourceAltRecipient :
SourceAltRecipientBL :
SourceDeliverAndRedirect :
MatchedTargetNTAccountDN :
IsMatchedNTAccountMailboxEnabled :
MatchedContactsDNList :
TargetNTAccountDNToCreate :
TargetManager :
TargetDirectReports :
TargetPublicDelegates :
TargetPublicDelegatesBL :
TargetAltRecipient :
TargetAltRecipientBL :
TargetDeliverAndRedirect :
Options : DeleteSourceContent
SourceForestCredential :
TargetForestCredential :
TargetFolder :
PSTFilePath :
RsgMailboxGuid :
RsgMailboxLegacyExchangeDN :
RsgMailboxDisplayName :
RsgDatabaseGuid :
StandardMessagesDeleted : 0
AssociatedMessagesDeleted : 0
DumpsterMessagesDeleted : 19020
MoveType : DeleteOnly
MoveStage : Completed
StartTime : 9/23/2014 7:29:01 PM
EndTime : 9/23/2014 7:32:19 PM
StatusCode : 0
StatusMessage : Messages have been deleted from the source m
ailbox.
ReportFile : C:\Program Files\Microsoft\Exchange Server\L
ogging\MigrationLogs\export-Mailbox20140923-
192900-8103154.xml
However, when I open the user's mailbox all of the emails still exist. kindly help me understand where I am going wrong and how I can delete all these emails.
Thank You
Philip

Are they still specifically in the Inbox?
I was thinking that the account might have "Deny" permissions to the user's mailbox but it looks like it can access the mailbox and delete items.
StandardMessagesDeleted          : 0
AssociatedMessagesDeleted        : 0
DumpsterMessagesDeleted         : 19020
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Issue with language specific characters combined with AD-Logon to BO platform and client tools

We are using SSO via Win AD to logon to BO-Launchpad. Generally this is working which means for Launch Pad no manual log on is needed. But this is not working for users which have language specific letters in their AD name (e.g. öäüéèê...).
What we have tried up to now:
If the AD-User name is Test-BÖ the log on is working with the user name Test-BO with logon type AD
If the logon Type "SAP" is used than it is possible to use the name Test-BÖ as the username
Generally it is no problem in AD to use language specific letters (which means it is possible to e.g. log on to Windows with the user Test-BÖ)
It is possible to read out the AD attributes from BO side and add them to the user. Which means in the user attributes the AD name Test-BÖ is shown via automatic import from AD. So it's not the problem that the character does not reach BO.
I have opened a ticket concerning that. SAP 1th level support is telling me that this is not a BO problem. They say it is a problem of Tomcat. I don't believe that because the log on with authentification type SAP is working.
I have set up the same combination (AD User Test-BÖ with SAP User Test-BÖ) as a single sign on authentification in SAP BW and there it is working without problems.
Which leads me to the conlusion: It is not a problem of AD. It is something which is connected to the BO platform but only combined with logon type AD because SAP Logon is working with language specific characters.

I have found this article with BO support:
You cannot add a user name or an object name that only differs by a character with a diacritic mark
Basically this means AD stores the country specific letters as a base letter internally. Which means that if you have created a user with a country specific letter in the name you can also logon with the Base letter to Windows.
SAP-GUI and Windows are maybe replacing the country specific letters by the base letter. Due to that SSO is working. BO seems not to be able to do that. Up to now the supporter from BO is telling me that this is not a BO problem.
Seems to be magic that the colleagues of SAP-GUI are able to to it.

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

How can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cl

how can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cos Nigeria has a very large apple market plus phones and most recently ipads especially. its been frustrating trying to get a macbook, even have to wait for when someone will travel out of the country, then you send the person(thats if you have the money at that time). Please somebody help inform apple maybe they can do something about this, its really disappointing.

This is a user-to-user technical support forum. You're not addressing Apple here. Use the apporpriate link on fhe Feedback page to let Apple know how you feel:
http://www.apple.com/feedback

Payment lot with Payment specification

Similar Messages

Maybe you are looking for