Payment made outside SAP and need to maintain the record in the system.

Hi Experts,
Please help me with this. A payment was made outside the SAP System but, need to be updated in the SAP for record purpose without paying again. Is there is way we can do it?
Thanks in Advance
Dip

Hi Dip,
You can process an off-cycle payment for the staff and do not run the DME process OR perform the complete process and do not send the DME file to the bank.
The other option is to post the payment and use a deduction Wage Type to recover the nett amount.
Regards
Saran

Similar Messages

Payment made for lightroom and photoshop joint package, still prompted for serial number

payment made for lightroom and photoshop joint package, still prompted for serial number which I have not been given. what do i do next?

Hi ,
I think you have downloaded the program directly from adobe. As you have the Photography plan, then you have to download this from Creative Cloud Desktop then they will be activated through with your email address. Then it will not ask for serial number.

E payment should be enabled so that the user could make payment directly from SAP and after the payment is verified ,approved and authorized by the concerned users responsible the payment should be electronically transferred to the payee's bank account th

E payment should be enabled so that the user could make payment directly from SAP and after the payment is verified ,approved and authorized by the concerned users responsible the payment should be electronically transferred to the payee’s bank account through our bank.

Thanks,
I usually use the OS connection option. So as you suggest, connect without the ISP connection software. Doing so does not by-pass the sudo command being active in Activity Monitor however.
On reading my post I see my failure to link the concerns of the laptop purchase with the sudo and modem. My thought here is of an intersection of known vulnerability with this widely used modem/software (via permanent sudo process activated) and that vulnerability then being known and utilised by another party(s).
I am pursuing the issue in part with consideration to a broader possible issue of vulnerability.
Thanks again for your thoughts and suggestions. Valued.

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ?

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ? I am overly frustrated. Please help. Not exactly sure which operating system I have. It is a dell laptop with xp.
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72

Well I was able to successfully revert back to iTunes8. Here's my steps:
1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
4. I then rebooted my PC
5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back!

I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance?

I deleted gardens of time yesterday and need to get it back with the current data and progress. Is this possible?

I deleted gardens of time yesterday and need to get it back with the current data and progress. Is this possible?

Is that on an iPad, iPod Touch or iPhone?

Hi I have mac os x 10.6.6 and need to update however keep getting the message " software update server ( 172.22.13.4 ) is not responding". My internet connections are all working. Any ideas how to solve this?

Hi I have mac os x 10.6.6 and need to update however keep getting the message " software update server ( 172.22.13.4 ) is not responding". My internet connections are all working. Any ideas how to solve this?

If you have enough room on the boot drive, head to System Preferences > Accounts and create another Admin Account, log out and into it and try your Software Update again.
If this doesn't work, connect a Ethernet cable to the router or modem (power off/on) and try again.
If this doesn't work then run through this list of fixes.
..Step by Step to fix your Mac
Diagnosing network issues

I have uninstalled Lightroom and need to re-install it on the same computer. I cannot find where to re-install it. The CC popup window says that it is installed and Up to date.

I have uninstalled Lightroom and need to re-install it on the same computer. I cannot find where to re-install it. The CC popup window says that it is installed and Up to date.

CC desktop lists applications as "Up to Date" when not installed
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

I have changed my payment method with another and since then it dose not except the new payment method i tried another one same thing is happing

i have changed my payment method with another and since then it dose not except the new payment method i tried another one same thing is happing

What payment method are you trying to use? Prepaid debit cards by chance? Apple does not accept prepaid cards.

I purchased the 9.99 monthly plan from iTunes to convert my resume from .doc to .pdf and it keeps telling me to purchase the upgrade I already bought. I look on my PC and it says I'm still a free customer and need to sign up annually for the pack. Bullshi

I purchased the 9.99 monthly plan from iTunes to convert my resume from .doc to .pdf and it keeps telling me to purchase the upgrade I already bought. I look on my PC and it says I'm still a free customer and need to sign up annually for the pack. ********! What do I need to do

If you purchased a subscription from Apple's iTunes store, you'll need to go to them to manage it:
Manage your auto-renewing subscriptions - Apple Support

HT2155 I want to use hotmail as my email not icloud and need to connect new ipod to the same account as my ipod nano

I want to use hotmail as my email not icloud and need to connect new ipod to the same account as my ipod nano

Just setup the iPod with your Hotmail account email address/Apple ID
The add the Hotmail email account to Settings>Mail

HT204266 I forgot the answers to the security questions and need it to buy things from the apple store in my new iPhone, how can I resolve it? Thank you

I forgot the answers to the security questions and need it to buy things from the apple store in my new iPhone, how can I resolve it?
Thank you

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

HT1364 I have a new PC and need to sync my iPhone5 to the new installation of iTunes. I don't want to lose the data on the phone! How do I do this? The PC is Win8 Pro.

I have a new PC and need to sync my iPhone5 to the new installation of iTunes. I don't want to lose the data on the phone! How do I do this? The PC is Win8 Pro.

If you have the old PC, transfer the library from it. If not, see Recover your iTunes library from your iPod or iOS device.
tt2

I have CS6 and need to be able to utilize the open GL option but not sure what I need to do to make

I have CS6 and need to be able to utilize the open GL option but not sure what I need to do to make this work...trying to bring a 3D pdf into photpshop for animation. Screen simply reads "enable 3D view'.

my goal is to bring 3d solidworks drawing files into photoshop and animate. one export option is a 3d pdf file which opens and rotates well in Acrobat pro...but when trying to bring it into photoshop. It looks like the attached pic."enable 3d view"

Maintain condition record on the basis of Forwarding agent

Hi,
How to maintain condition record on the basis of Forwarding agent?
ie. Forwarding agent is not there in field catalogue in condition table.what to add and how to maintain condition record for same?
Reg,
Antaa21

Hello,
Is Forwarding Agent created as Vendor in your system? If yes then field LIFNR - Vendor is available in SAP Standard Field Catalogue for Pricing.
You need to use this field (LIFNR)in your Condition Table.
Hope this helps,
Thanks,
Jignesh Mehta

Payment made outside SAP and need to maintain the record in the system.

Similar Messages

Maybe you are looking for