Payment methods download from ECC to CRM

Hi Masters,
Due to some requirement, new Payment methods customised in ECC so have to download from ECC to CRM. How it download through delta download. Existing payment methods data updated with adapter object name # CUST_TSP_WRITE and table name # CRMC_BUAG_PAYM in crm. iam new to crm plz Could anyone tell me step by steps.
its urgent.......... plz........
thanks in advance.
Regards
Sri

Hi Sri,
Payment methods maintained in ECC can be replicated to CRM via CRM download object DNL_CUST_PAYM in transaction R3AS in CRM. This updates the associated CRM table CRMC_BUAG_PAYM and CRMC_BUAG_PAYM_T.
If you wish to create payment methods directly in CRM, then you can do so via customizing in CRM through transaction SPRO >
Customer Relationship Management > Master Data > Business Partner > Business Agreement >Define parameters for Business Agreement > Define Payment Methods.
I hope this helps.
Best Regards
Gavin

Similar Messages

Listing/Exclusion Conditions are not getting downloaded from ECC to CRM

hi,
I have created the customized table for listing/exclusion purpose as per the requirement.
I have created the middleware adapter for that object.(DNL_CUST_G804)
I have down the initial download and when I check the status it is green color when I check the records in CRM Table I did not find it.
When I check in the SLG1 the following error has been occurred
"No Entries Determined for the A Tables (Block 1)"
Message no. CND_MAP312
Diagnosis
No entries have been transferred from R/3 to CRM for one of the following reasons:
1. The R/3 condition table does not contain any entries.
2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
System Response
Error message CND_MAP 312
Procedure
If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
Condition records have been maintained in ECC server.

Hi
i have the same problem , how did you solve it ?
regards
Jacopo

Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
Rj

Hello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva.

Issue with customer download from ECC 5.0 to CRM 5.0

Dear CRM gurus,
We are facing very strange problem regarding sales area and sales office in CRM 5.0 test system
During the download of an ECC 5.0 customer into CRM the BDOC is giving the following error - 'Sales office O 50000617 is not available' and 'Sales office O 50000617 sales group not maintained for sales area O 50000608 10 10'and Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
I just select the BDOC and reprocess it immediately. Now the customer is downloaded into CRM and BDOC turns into green. I am also able to see the sales office and sales area in the downloaded CRM BP.
The sales office 50000617 is very much there in CRM and is properly assigned to sales area 50000608 10 10. That's why, I should be able to reprocess the struct BDOC successfully.
But for some reason the sales office is not getting determined first time during the download. This issue is driving me crazy. This only happens with the customers with sales office. If there is no sales office in ECC customer (i.e. the field is empty) then there is no issue. This customer will get downloaded without any error.
Also the downloaded material doesn't have the sales area data.
This issue doesn't happen in our development system. The only difference is, sales org structure in development system is manually created and it is downloaded from ECC in test system.
Can you please advice me on how to solve this issue?. It is a bit urgent.
All valuable inputs must be rewarded,
Regards,
Raj

Hi Gun,
You are the only one responded to my issue. I have allocated some points.
Yes. I have checked the assignment in CRM organizational model.
I did download the org. structure from ECC 5.0
All objects including sales offices are activated for determination and I have verified with green light
As per your suggestion if the sales area data is not matched between the two systems, then how come the error will not reappear during the bdoc reprocess?
What is missing during the first time bdoc process? Looks something is missing for validation module?
Any inputs?
Thanks,
Raj

Mass download of condition records from ECC to CRM

Hi Team,
We need to download many condition records from ECC to CRM. We are doing a request download but it takes lot of time. Is there a way to do a mass download of condition records form ECC to CRM.
Regards,
Jan.

Hi Robert,
We have all the articles in CRM but the prices are not matching for 2000 articles. Kindly suggest us in doing a mass download of the condition records for those 2000 articles.
Regards,
Jan

Equipment Download from ECC 6.0 to CRM 5.0

Hi,
I have made equipment in ECC 6.0 using the Transaction code IE01.
While trying to download it into CRM, the BDoc shows a validation error
I have activated the adapter objects EQUI_CONFIG and EQUIPMENT.
I will be obliged If somebody can give me the step by step process to download the equipment from ECC to CRM and the customizations to be done as a prerequisite.
Thank You
Rekha

Hello Everyone,
Iam trying to Download Equipments from ECC 5.0 to CRM 5.0.
Iam getting a Validation Error in the Bdoc CRM_EQ_DMBDOC.
The Error Message is <b>Assign a Base Category to the Product.</b>
I have the Base Hierarchy R3PRODSTYP Assigned to the Application
Product.
And i cannot edit the Hierarchy or Categories since they are Downloaded
from ECC.
Please let me know how to Specify a Base Hierarchy/Category for the
Equipments to get Downloaded as Individual Objects.
Thanks & Regards
Kumar

Downloading Material Master data from ECC to CRM

Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management  Transactions  Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty

Price download from ECC goes to which condition maintenance group in CRM?

Hi all,
I have a question related to pricing download. If I am downloading conditions from ECC to CRM, how does the system determine that the condition type needs to go to which Application & Condition Maintenance Group in CRM?
Thanks in advance.

Hi,
When u download pricing conditions from ECC to CRM the Application is always CRM and u need to create Condition Maintenance Group in CRM in SPRO path:
Customer Relationship Management>Master Data>Conditions and Condition Technique>Condition Technique: Basics>Create Maintenance Group
here u can create and add the conditions and Condition table as required.
Hope it helps,
Regards,
PePe

CRM exchange rate delta download from ECC

Hi experts,
We are trying to download the exchange rate from ECC for the delta scenario. I've tried to schedule a job to run the program SMOF_DOWNLOAD with Object DNL_CUST_BASIS3, but it comes up with an err, which says "Error 004 DNL_CUST_BASIS3: No Initial Load if data distribution is active. Use Synchron. Load". Will anyone advice how to achieve the delta download for exch rate from ECC to CRM or what i did wrong in the program execution?
Rgs, Michelle

Hi,
you can check the object DNL_CUST_BASIS3 by t-code:R3AC3,
Delete Function COMPARE, Then can load again and check
Regards...
Arup

Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

Hi All,
I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
Please help me as to how to resolve this issue.
Thanks in advance,
Shubham

Hi Shubham,
Please check the queues in SMQ2 and what status they are showing?.
Thanks,
Faisal

How to activate delta download for BP from ECC to CRM

Hi,
i have completed BP initial download from ECC 6.0 to CRM 5.0.
i dont know how to activate the Delta download?.
Plz anyone tell me the procedure.
regards
geetha.g

Hi Geetha
Synchronization download allows you to synchronize inconsistent datasets on various databases. This can be controlled in time slots or can be triggered manually.
1. Creating a Request
Choose Middleware -->Data Exchange --> Synchronization --> Define Requests.
To define a new data request, choose Display --> Change and New Entries.
Enter data for the request.
In object name enter CUSTOMER_MAIN
2. Starting the Request
Choose Middleware --> Data Exchange -->Synchronization --> Synchronize Objects.
A selection screen appears. Enter the objects to be synchronized or use F4 input help to select objects. Choose Execute to start synchronizing the data.
3. Monitoring Request
Choose Middleware --> Data exchange --> Synchronization --> Monitor requests
Enter an object name or a range of object names. Use the input help or of you want to display all the objects, do not enter an object name at all. Choose Execute.
Further help is available on http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Can we download employee data from ECC to CRM using standard middleware?

HI,
Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
Thanks,
Regards,
PV

Standard replication for employee to CRM is using ALE.
BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
However send this information using ALE is not difficult. Why don't you wan to use ALE?
Regards,
Lyda

Downloading Pricing condition records for products from ECC to CRM

Hi All,
I have a requirement where i need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
Note: 1. The Products are already in the CRM system.
2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
Thanks & Regards,
Shwetha.

First of check and ensure that if the records are already downloaded. To do so,
1) Log to ECC system and go to tcode V/06
2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
1) Log to CRM system and go to se16
2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
4) query the table with input parameters like Product or Sales Org. YOu should find the records.
If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
Hope this helps
Regds,
Raghu

Download ztable data from ECC to CRM 7.0

Hi,
I have created ztable in ECC and CRM 7.0,(tables are same).Now I want to downlaod data from ECC to CRM.
Table should only be updatable from ECC. No maintenance required in CRM.How to achieve this?
Please suggest me.
Thanks,
Brahmaji

create customizing adapter objects in R3AC3.
copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code.
load object in R3AS.
create a variant and shedule the based on requirement

Replication of Quotations from ECC to CRM

Hello Experts,
The scenario is as follows:
I am required to replicate all the quotations from ECC to CRM.
My question is: what are the various middleware settings to be done?
I have created a transaction type for quotation by the same name in ECC and CRM so far.
It would be great if I can get help on the following:
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
2.What action profile do I need to maintain on ECC and CRM side for quotation?
3.How should the number ranges be defined on ECC and CRM side for quotation?
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
What more needs to be done?
Once the settings are complete and fool-proof, I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
What are the filter settings to be maintained in SalesDocument Object?
Experts, this is my requirement and all the pointers would be greatly helpful.
Many thanks,
VSK.
Edited by: venkatskumar on Feb 16, 2011 12:17 AM

Hello
Please find below my reply :-
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
>> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
2.What action profile do I need to maintain on ECC and CRM side for quotation?
>> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
3.How should the number ranges be defined on ECC and CRM side for quotation?
>> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
>> Yes
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
>> Not sure on this. Requesting other experts to answer this.
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
>> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
Hope this will be helpful.
Regards

Payment methods download from ECC to CRM

Similar Messages

Maybe you are looking for