Payment methods for automatic incoming payment processing.

Hi,
We have been using 'f110'  program for automatic outgoing payment processing. Now we are trying to set the incoming payment processing using the same program.  It should be mentioned that its a Canadian organization.  For outgoing payment, we have been using Bank transfer method, one of the available methods for outgoing payment. Our organization wants the same bank transfer method for the incoming payment processing. However, Bank transfer method is not belong to the group of incoming payment methods, rather it has the following methods:
                      1. Debit memo
                      2.   Bill/ex
                      3. Bill/ exch. pyt req.
                      4. Payment demand .
I am just wondering is there anyway we can include the bank transfer method inside the incoming payment group or we can use any of the existing method for the same purpose.      
Reagrds,
Lokman

Dear Lockman,
The payment method "B" can just be:   
If outgoing payment:   Bank Transf           
If incoming payment:   Debit memo            
So Debit memo means Bank transfer for incoming payment.
I hope this helps.
Mauri

Similar Messages

  • Where to set payment method for automatic payment F110 ?

    hello everyone
    I need some help.
    user want to use payment method M(manual check) to pay by automatic payment F110.
    but when use f110 no transaction for that vendor (that vendor using manual check).
    where to config payment method for automatic payment F110

    hello everyone
    Hi ,
    APP program runs- on payment method please make setting for your payment method "M" in FBZP.
    Like Payment method for Country (OBVCU) & company code (OBVU)
    Make sure that you have assigned payment method (M) bank ranking & subaccount.
    Assign the payment method to vendor master data & invoice.
    After that check the invoice comes under your payment dates
    Hope after that if you run F110 picks up the open items
    Thank you
    Anil

  • I can't find NONE option in payment methods for changing my payment methods

    Hi,
    I have problem with my payment method. I can't find "NONE" payment options on my iPhone 5. What can I do for solve this problem. I need to remove my credit card information and use my iphone without credit card. Thanks.
    Regards,
    Shroo

    I have solved my problem with registering a new master card. The problem was dept for one of games on my iphone 5. After paying my dept with new credit card, my apple id has unblocked.

  • Restricting Payment Method For Customers

    Dear gurus!!!
    My client has the following requirement in which he desires that
    1- Can we receive incoming payments from customers with different payment methods. In our assignment field we give the cheque number or deposit slip etc... which is freely definable, so we want to restrict the payment method against customer considering that there is no option of "payment method" in the incoming payments screen f-28.
    we want to restrict incoming payments from certain customers via cheque or cash.
    does any one has any ideas on how to fulfill this requirement
    your help would be highly appreciated ....
    thanks
    Aurangzeb Khan

    Hi,
    You can only use the payment methods assigned to your customers using the automatic payment program. Determine a house bank for these payment methods. With this it will determine which account to be used, when the customer paid in cheque or cash.
    Create a payment method for INCOMING payment for cheque and cash. After that you assign the payment to your customers. When you receive the payment, you won't use f-28 but you will use F110 instead. Select the payment method for this customer and the customer. Once you're done up to posting, the payment is posted to the specific account for cheque or cash.

  • Incoming payment method for cash

    Hi,
    Could anyone explain how to create incoming cash payment method in FBZP?
    No document type is required for payment /clearing as it is cash invoice with immediate clearing.
    Thanks,
    Ben

    Hi Ben,
    check these links, I think they can help you.
    http://help.sap.com/saphelp_rc10/helpdata/en/f4/1fae3aa8cd4da085c1585d2861eec5/content.htm
    http://help.sap.com/saphelp_sbo88/helpdata/en/44/ea2280bbc903fde10000000a1553f6/content.htm
    http://help.sap.com/saphelp_sbo88/helpdata/en/45/1830edc2eb10a5e10000000a11466f/content.htm
    http://www.scribd.com/doc/55883571/20/Business-Transaction-%E2%80%93-Automatic-Incoming-Payments-FBZP
    FBZP config
    http://help.sap.com/saphelp_sbo2005b/helpdata/en/e9/c1f6c6d612644db4400890f88b21e1/content.htm
    Best regards,
    Cristiano Silveira

  • Error : FZ010 : Enter a payment method for incoming payments

    Hi,
    I am running F110 and paying intercompany vendors/customers.
    I am running payment run for Compony 0050 and paying my vendor VEND0060 and CUST0060.
    The balance of vend0060 is 2 million(credit) and  balance of CUST0060 is 1 million (Debit).
    So I am going in Reallocate and changing the bank details as getting exceptioin in CUST0060. But it gives out an error "Enter Payment method for incoming payments"
    We have just configured outgoing payment and actually as credit balance is more, it should not give this error.
    Does any one know solutin for this?
    Error in details:
    Enter a payment method for incoming payments
    Message no. FZ010
    Diagnosis
    The balance of the items to be paid requires a payment method for incoming payments. You specified a payment method that is defined for outgoing payments.
    System Response
    The payment method is rejected.
    Procedure
    Enter a payment method for incoming payments.
    Thanks
    JR

    In the master record of the customer/vendor, ensure that the appropriate payment methods are maintained.  If you click on F4 on the payment method field, you can see different methods available for Incoming Payments and different methods for Outgoing payments.
    Assign points accordingly.
    Thanks,
    Madhav Nanduri

  • Payment method for incoming payments

    Hi,
    I am trying to net off a customer balance against a vendor, however system is asking me to define a payment method for incoming payment for customer line items.
    could you please suggest me where to define payment method for incoming payments.
    Your prompt help is greatly appreciated.
    Thanks
    Ramesh.

    call transaction FBZP
    double click of "payment Method in country"
    here you defined the payment metod at country level & company code level
    plz assign point as way of thanks

  • Payment File for each Payment method in Automatic payment run

    Hi Guru,
    For each payment method in automatic payment run, eg, ACH(Auto Clearing House), Bank Draft. etc. what kind of payment outbound file I need to take note to configure it, please advice me. Thanks.
    Regards,
    Kick

    Hi
    Please check the documentation in the link below. You will be able to get some help from them.
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9c24d455711d182b40000e829fbfe/frameset.htm
    Please let me know if it is useful. Also do award points if found useful.
    Karthik

  • Automatic payment method for business area wise or profit centre wise?

    hi,
    tell me about customization of Automatic payment method for business area wise or profit centre wise? or where we have to assign
    Regards,
    Munna
    Edited by: munna !! on Jan 18, 2008 7:38 AM

    App?

  • Process steps for customer incoming payment w.r.to Billing.

    Hi all,
    Can some body help me in by providing the process steps for customer incoming payment w.r.to Billing.i want to know the process from open items to cleared item , if possible pl give table names also and thier data flow using tables.
    thanks

    Dear Sai,
    Use the transaction code F-28.Give the document date, Bank account, amount received, Value date, and the customer code. In case you know which are the document numbers against which you have received the payment, select the "Document numbers" in the "Additional selection" tab and then click on "Process open items".
    Fill the document numbers in the next field, press enter and then click on "Process open items". Select the open items, simulate and then save.
    In case you do not have the document numbers, then directly click "Process open items", select the line items and click "Document > Simulate" and then save.
    Assign points if useful.
    Regards
    Venkatesh

  • Automatic SAP Cash Application- for ACH incoming payments

    Dear experts,
    We have requirement to automatically apply cash for the ACH incoming customer payments. We have been using LOCKBOX for automatic cash application for Check incoming payments. Now we want to implement automatic cash application for incoming ACH payments as well. What are available best options? Can we do this through EBS?
    Any suggestions are highly appreciated.
    Thanks,
    Tina

    Hi Tina
    I suggest to use a different GL code for incoming ACH payments and set this up using BAI codes from your banks EBS file. I believe you are not running EBS statement upload or manual load currently. Identify all the bank transactions and their related BAI codes with the help from your bank.
    Thanks
    Sekhar

  • RE: Payment method for Netting Process.

    Hi Gurus,
    My client want to activate Payment methods for netting process for their European company codes.
    Can anyone please help me on how to do customization for the netting process.
    Please input complete SAP Configuration required for Netting Process.
    Regards,
    Santosh.

    Please don't purchase vouchers from suspicious websites, if you purchase vouchers then only from official Skype partners like Ukash: http://www.skype.com/intl/en/prices/ways-to-pay/ukash/
    In order to get your money back please contact website where you bought it from.
    Hopefully you will get your money back, there is a good chance that it was a scam.
    If you are not sure if website is legit or not then first ask from customer service: https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • Automatic Incoming Payments F110

    Hi Everyone,
    I have searched through the entire forum, and still did not find an answer to my question. I am running desperate, really hope someone can help me!
    I need to configure F110 to process incoming payments automatically. I have made all of the settings (as it seems to me), and I am still getting the error message 006 in payment proposal (no valid payment method found). In the proposal run at item level ID for Account Details (HKTID) is not getting selected automatically.
    As we are trying to make it automatically is of no use to asigned it manually.
    The company code is in BRAZIL, and the payment method I am trying to use is direct debit. I was also hoping that I will be able to generate the direct debit letter to the customers after, and to produce the flat file to the bank, but I cannot even get the payment program to run and post payments.
    Any help in this will be greatly appreciated. Please help!
    Thanks in advance.
    José

    Hi,
    We are using T Code: F110 for Automatic Outgoing Payments only. We never tried for Incoming Payments.
    As per my knowledge F110 won't work for Incoming Payments.
    Thanks
    Chandra

  • When using program RFDM3000/Automatic creation of dispute cases what is the difference with the option of Automatic incoming payment and Open items?

    We currently have a batch jobs running for each, automatic incoming payment and open items.  This was set up in the past and we are trying to determine what the difference is for each of these functions?  Do you need to have the automatic incoming run prior to the open items for residuals and payments on accounts?

    Hi Chris,
    Program RFDM3000 creates dispute cases for residual items arising during automatic incoming payments (account statement, lockbox), during check presentation, or in postprocessing.
    Alternatively, you can use the program to create dispute cases for open receivables items. You can use the selection criteria to restrict the quantity of open items (for example, using the document type and posting key for residual items from incoming payment postings).
    You will find more information in the link below
    http://help.sap.com/saphelp_erp2004/helpdata/en/0b/e07340b0c6980ae10000000a155106/content.htm
    Regards,
    Jose

  • Payment methods for 3G on iPad?

    Apple isn't too clear about the accepted payment methods for activating 3G service on the iPad and I really really do NOT want to use a credit card. Can I use iTunes gift cards? Can I use a prepaid Visa (or other provider) gift card to pay for the service? Thanks!

    On this webpage they explain the sign-up process for iPad 3G:
    http://www.apple.com/ipad/3g/
    They have only mentioned credit card here. So I would not expect any other forms of payments to be accepted. If other forms were accepted they would have mentioned it. iTunes gift cards would definitely not work IMHO.

Maybe you are looking for

  • Whoever updated BoxLayout must not know how to program in Java

    Why would you allow anyone to update their source that doesn't know what they are doing. Notice that BoxLayout is non-consistent with any other layouts. i.e. Why do you think that JPanel allows you to create a Layout when instantiating the object?. T

  • Extensions Not Displaying in CS3

    Okay, I just realized my Flex Style Explorer problem is bigger. I just installed senocular's Patterns and Textures extension, which should also be available under Window, and it is not installing either. Anyone have any ideas? Yes, I did exit and res

  • ITunes suddenly refuses to open

    I'm looking for some help with my iTunes. I have windows 7 and have been running iTunes on it for months now. Just today I attempted to open iTunes and a few messages came up saying that I'm missing CoreVideo.dll, CoreAudioToolbox.dll, that there are

  • PSE *.0-How To Get Rid of That Annoying Welcome Screen!!??

    I thought I saw a post on how to get rid of that annoying "welcome" screen and all the ads when PSE opens but cannot find it. Can someone point me in the right direction please? I just want PSE to open into the Organizer upong clicking. Dan

  • Ft_read byte data problem

    Good morning , I am trying to work on a project where am using an ft2232d as a master where i send a date frame to a slave device and the device is programmed to reply  with a ff ff..I am using ft_read_byte data to read off the response of the slave