Payment of travel and subsistence with FI using bank details in HR module

We have implemented the HR and FI module for a client. They have a requirement that they would like to pay S&T in FI using employees details in HR without creating the employees as vendors in FI.
How can the FI module access the bank details of the employee from HR and pay the S&T.
Is it only possible if the employees are created as vendors.

Hi,
Please find the below links,hope this helpful for you.
http://help.sap.com/saphelp_46b/helpdata/en/81/42b09e4a3711d189490000e8323c4f/frameset.htm
Regards,
udayakumar.k

Similar Messages

Is it possible to transfer music between iPhones and iPods with out using iTunes

Is it possible to transfer music between iPhones and iPods with out using iTunes

Nope. Both require iTunes on a computer to sync music from.
Unless the iPod is an iPod Touch and the music was bought from iTunes. In which case the Touch can simply go to the iTunes App, under Purchased and download the purchased songs for free.

Travel and Expenses / Create Expense report / Mileage Details

Hi all,
I have a requirement to do some validations whenever the user enters the license plate number in
ESS Travel and Expenses / Create Expense report / Mileage Details .The system must throw a message if the user enters a wrong license plate number.
How do i know whether this is ABAP WD iview or JWD iview.IS there any BADI or BAPI for the validations.
Where is the information about License plate getting saved.
I have created a custom infotype for my requirement. The license plate must be validated from the data present in this infotype.
Can someone post me some advice on this please.
Thanks,
Anil

Achieved by enhancing WDA Component FITE_VC_MILEAGE, view DETAILS_VIEW and added a post-method exit call to check if the licence plate entered by the users match the one saved on infotype 0017 or our custom infotype. So when the user clicks on either 'Accept' or 'Accept and New entry' buttons the license plate is check with the data stored on IT0017 or your custom infotype - If the license plate match then the user should be able to save the record but if this doesn't match then the system should throw an error message. created a custom message class in SE91.

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Image won't open after right click and "open with" command using Editor PSE 10

Can't see image after right click and "open with" Windows XP command using Editor PSE 10. The editor opens but no image appears. I have to use the open command from within Editor

Make sure you have chosen the application PhotoshopElementsEditor.exe and not a shortcut.
To manually associate a file format with an application:
In Windows Explorer, right-click a file whose file association you want to change. For example, if you want to change the file association for all jpeg files, click a jpeg file.
Choose Open With > Choose Program from the pop-up menu.
In the Open With dialog box, click Browse and then locate and select the exe application file.
Checkmark "Always use the selected program to open this kind of file" and click OK.
Note:If you choose a program from the Open With menu in step 2, instead of selecting the Choose Program option, this check box is not available, and the file association won't work.

Retire Oracle Designer development and continue with just using Forms 11

Hi,
The company I am working for is taking over responsibility for an Oracle Designer 10 application.
Due to Oracle Designer is an outdated development environment we are looking for potential solutions how to get rid of Designer without completely redeveloping or replacing the application.
One options we thought about is to switch off Designer and only continuing to use Oracle Forms 11.
Do anyone of you have experience in this area which you would like to share?
Best regards,
Marco

There are a lot of case generated (CG$) trigger and procedures used in the Forms. For us the code seems to be very complex and hard to read.
But, also some of them seems to be never used or it is just the statement "null" in it.
We thought about SQL Developer Data Modeler to capture most of the Designer stuff. But still there is the technical documentation that is not fully supported by SDDM. Did anyone migrate these Designer documentation to an other tool? If yes, to which one and how? We tried the SDDM Report functionality to capture some of the documentation, but also these reports do not contain everything that Designer could provide.
There are also "Preference Sets" used in Designer and we are wondering how to migrate these to Forms Builder. Did anyone migrate these preference sets to Forms Builder in the past and has some experiences/examples/recommendations about that? We thought about one "global" form that could contain these preference sets and then inherit them.
There are also the Functional Hirarchie Diagrams in Designer, could they migrated to Forms or SDDM in any way? Or do we need to maintain these diagrams manually in a tool like Word or Visio?
If we could capture all the things mentioned above, we would like to continue just with Oracle Forms Builder 11gR2 in combination with other tools like SQL Developer and Data Modeler and if no other solution could be find out with some manual maintained documents.
For all recommendations and tips we are very interested and we would thank you all very much!

Two websites-one with .Mac and one with .Mac using personal domain

Good Day All! I know I asked this before but I think the question got wrapped in with another and I don't see that it has been answered. If I overlooked it I apologize for the duplicate post.
I have a .Mac subscription with one published website already. I am working on another website now in iWeb but I want to publish it using a personal domain name. Can I do this? If so, can I keep them from being linked together?? Does that make sense? Thanks! quinlis

Aloha,
if you use CNAME both sites will be reachable using either the CNAME or the web.mac.com/username/ address
if you use Webforwarding entering the personal domain will get to the site you pointed the domain to
but that site will also be reachable through web.mac.com/username/sitename/
I'd recommend you to use webforward with cloaking/masking/framing in your case. Thus the site you want to have the personal domain for will show the personal domain in the browser and will also be reachable through web.mac.com/username/sitename/ but your other website will not be reachable through your personal domain.
Note that using masking google will not index the content of your pages using your personal domain if you're interested in that.
Have a look at the following page for further information on setup and knowing what's CNAME, Febforward, Webforward with cloaking
http://alyeska.altervista.org/en/iWeb_Domains.html
I guess the best way would be having a family account or two .mac accounts so you can set it up as CNAME and your other site would be published to another account or sub-account and thus not reachable using your personal domain.
Regards,
Cédric

Y won't my iPhone let me update my payment methods or let me up date my bank details

Y won't my iPhone let me update my payment methods or let me up date my bank details

Hey I had the same problem for days now. I tried everything including resetting my phone even my wi fi DNS and nothing seems to work. I've been searching and searching for days and nothing seems to work, and FINALLY I decided to back up all my videos and pictures onto my computer then rebooting my iphone completely. Here are the steps if you want your iphone to work again. First connect your phone to your computer open itunes and back up everything from your iphone to your computer it will take a couple of minutes. After that is done just go back to your phone to settings/ general/ reset/ ERASE ALL CONTENT AND SETTINGS and just click on continue your phone will shut off once it turns back on just follow the instructions it also has you either create an icloud name or use your old one, once you log onto your iclouds and set up everything go to settings then messages and sign in and wah lah it works! I was really excited I've been a little annoyed with the whole stituation and now I'm just happy it's fixed. Hope this works!!

If I create a new Apple id account with the same bank details for a old Apple id account will I lose my old account?

My daughter has created a Apple Id account with my bank details and I have an Apple id account myself on her phone it's comimg up with "This Device Is Already Associated With an Apple ID. If you turn on Automatic Downloads with your Apple ID, you cannot auto-download or download past purchases with a different Apple ID for 90 days." Does this mean if she presses cancel or transfer will my account be affected in anyway.

I set up FaceTime and Messages on four different devices with only one Apple ID. I used the exact method that is described in the video that AnaMusic has provided to you in the link in her response above. That method worked fine for my family, but you can create new Apple ID's just to use for FaceTime and Messages if you like. Many users prefer doing that as opposed to adding new email addresses.
IMO - using unique email addresses (like in the video) makes sense, because we (my family) all have different email addresses anyway, and it was very simple to add each family members email address to both apps and remove my Apple ID email address as the contact address on each device.
BTW .... if you are using your Apple ID on both devices - your phone number should be the number that is showing in the settings - not you daughter's. Did you set up the Apps with your Apple ID?

Very slow CD import (and Backup) with itunes using Windows 7

I just got a new HP Pavilion Windows 7. It takes hours to import a CD thru itunes - seconds thru any other software. I have uninstalled and reinstalled itunes (all components) multiple times. Apple phone support was no help. Does anyone have any suggestions?
Thank you

It's probably something else entirely, but just check under *Edit > Preferences > General > Import Settings* that you don't have a tick in the box marked *Use error correction when reading Audio CDs*.
<hr>
*Fast backup for iTunes library (Windows Only)*
Grab SyncToy 2.1, a free tool from MS. This can be used to copy your entire iTunes library (& other important data folders) onto another hard drive or network share. You can then use SyncToy periodically to synchronise or echo your library to the backup. A preview will show which files need to be updated giving you a chance to spot unexpected changes and during the run only the new or updated files will be copied saving lots of time. And if your media is all organised below the main iTunes folder then you should also be able to open the backup library on any system running the same version of iTunes.
tt2

Copying folders and Subfolders with files using Promises WinJS

Hi,
I have app written in WinJS.
I want to copy a particular folder along with its subfolders and their files. I am so far successful with copying folders. Below is the code for the same.
app.CopyFolder = function (folder, destFolder) {
var replace = Windows.Storage.CreationCollisionOption.replaceExisting;
//console.log("create folder: " + folder.name);
return destFolder.createFolderAsync(folder.name, replace).then(function (newdest) {
return app.CopySubFolders(folder, newdest);
app.CopySubFolders=function(folder, destFolder) {
return folder.getFoldersAsync().then(function (folderlist) {
return WinJS.Promise.join(folderlist.map(function (folder) {
return app.CopyFolder(folder, destFolder);
Now after I have copied all the folders I need to copy their respective files. The problem is I am stuck,I get the files copied but I want to proceed ahead after all the files are written to their respective folders. Below is the code for the same.
app.copyAllFiles = function (fileList, destStorFolder) {
console.log('copyFiles Start...');
var promises = [];
var fileCopied = 0;
var collideOpt = Windows.Storage.CreationCollisionOption.replaceExisting;
return WinJS.Promise.join(fileList.map(function (file) {
return app.copySingleFile(file, destStorFolder);
app.copySingleFile = function (fileObject, destFolder) {
var promises = [];
var fileCopied = 0;
var path = destFolder.path + "\\" + fileObject.folderName;
var collideOpt = Windows.Storage.CreationCollisionOption.replaceExisting;
return Windows.Storage.StorageFolder.getFolderFromPathAsync(path).done(function (folderObjectOfLocalFolder) {
return fileObject.fileObject.copyAsync(folderObjectOfLocalFolder, fileObject.fileName, collideOpt).then(function (fileObject) {
console.log("copied single file:" + fileObject.name);
The problem is when i run the folder copy code and apply breakpoint for the success call back of
CopySubFolders(source,destination).done(/*my breakpoint*/)
The folders are created.
But when I try to breakpoint for my copyAllFiles,the files are created only when i pass the success call back.
Can anyone tell me what am i doing wrong? How can I proceed ahead only when all the files are written successfully.
Regards,
Ninad

Hi,
I tried the above solution but what i want is that the action of copying folders and subfolders along with the files should be done with promises and that promise should return only when all folders,sunfolders and their files have been copied. I want to
do it in this way because I want to perform certain second action only when all things are copied.
If I do it the as per the link the function runs in the background and my second action proceed aheads and may cause error if it finds some folder or file missing.
So I came up with following above code,first copy folders then copy. The copy folder works as expected but the files are getting copied only when the file copying code enters the success call back.
Can you please shed light on my code where I am going wrong.
Or is it ok to proceed ahead with the solution you mentioned at the link cause I dont want any runtime crashes.
Regards,
Ninad

Webdynpro ABAP Travel and Expenses

Hi All,
         I have configured Webdynpro ABAP Travel and Expenses with ESS 1.41. I am able to submit an expense request and view the PDF form when I click on the Display form in the request. I am using the standard worklfow WS20000040 for trip approval. When I submit a trip it comes back to the employee for for the trip consistent check. In this step when I click on the "Display Form" button I am getting the error "Value null of URL parameter SAP_FITV_PERSNO has the wrong type".
I followed the steps mentioned in the migration guide attached to the note 1076144 and I have uploaded the XML file provided for EHP4 in the portal.
XML
===
    <Action name="com.sap.pct.erp.mss.tra.action.DisplayExpenseForm" groupAction="" handler="SAPWebDynproABAPLauncher" referenceBundle="com.sap.pct.erp.mss.tra.DisplayForm" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="toolbar=no,menubar=no">
      <Properties>
        <Property name="WebDynproApplication" value="FITV_TRIP_FORM"/>
        <Property name="SAP_FITV_TRIPCMP" value=""/>
        <Property name="SAP_FITV_TRIPNO" value=""/>
        <Property name="System" value="System_Alias"/>
        <Property name="WebDynproNamespace" value="sap"/>
        <Property name="display_order_priority" value="10"/>
        <Property name="SAP_FITV_PERSNO" value="${item.EmployeeNumber}"/>
      </Properties>
    </Action>
But if I hard code the TRIP number and Personnel number the PDF forms opens correctly.
XML
===
    <Action name="com.sap.pct.erp.mss.tra.action.DisplayExpenseForm" groupAction="" handler="SAPWebDynproABAPLauncher" referenceBundle="com.sap.pct.erp.mss.tra.DisplayForm" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="toolbar=no,menubar=no">
      <Properties>
        <Property name="WebDynproApplication" value="FITV_TRIP_FORM"/>
        <Property name="SAP_FITV_TRIPCMP" value=""/>
        <Property name="SAP_FITV_TRIPNO" value="123456789"/>
        <Property name="System" value="System_Alias"/>
        <Property name="WebDynproNamespace" value="sap"/>
        <Property name="display_order_priority" value="10"/>
        <Property name="SAP_FITV_PERSNO" value="00945892"/>
      </Properties>
    </Action>
The bindings in the workflow are correct, I am not sure why the values are not being passed from the UWL to the FITV_TRIP_FORM application.
If you have encountered this issue, can you please let me know how you fixed this.
Thanks,
Anand

Hello krupanand,
We are also facing the same issue.
But still we are facing the issue. we have implimented the note 1076144 but not 1239932.
Is it mandatory to impliment the second note.
The reason we didnt impliment note 1239932 is that, we are not using FITV_POWL_TRIPS application.
we are using the UWL iview for travel workitems
Kindly help in sorting this issue.
BR,
Harthi

HT2589 when I try and log in my i-tunes account or my app store account on my i-phone it says "this apple I.D has not yet been used on the i-tunes store" it gives me 2 optins "cancel" or "review" I press review, enter my bank details but they decline..why

Hi can anybody help or advise me? I've recently bought the i-phone 4s, I've set up my apple I.D and password but everytime I try and log in it says "this apple I.D has not yet been used on the i-tunes store" I click "review" follow the instructions and agree to the terms and condition's, enter my bank details but it declines every time? I've tried both my accounts and its declined both, this stops me from logging in so I can't download anything for free or buy anything, my sister had the option of skipping the bank details part when she created her apple I.D and just enters her's when buying something, why do I not have that option?? And why is it declining my bank details...please HELP!!!!!

The details I'm entering are correct, I choose visa as my card type, enter my card number, enter my expiry date and my last 3 digts on the reverse of the card, enter my address and zip code plus my home telephone number, click continue and it says "the payment method you have selected has been declined, please enter another payment method". I've lost count how many times I've tried, I've typed my details in slowly making sure I put them in properlly and it still declines it, I've even tried makeing a new apple I.D and when I get to the bank details part it declines it again so I am forced to press cancel and all details are not saved so its just like I'm hitting a brick wall, its ******* me off!!! I can't even download any of the free app's because to do so you must log in but when I do it says "this apple I.D has not yet been used in the i-tunes store" review my details and can't get past the bank details part. So doesn't log me in, I'm honestly out of ideas

With out using pivot function need a Query

Hi
I am having table which has 7 columns
data in table:
ID,Region,area, year-month, sales_target, actual_sales,
1, abc,    xyz,   200907,       1000,          500
2, abc,    pqr,   200908,       2000,         1500
3, mnr,   xyz,   200907,       3000,          2000
I need the data in year and month with out using pivot funtion
intial
region, area,    jul,   aug, sep, oct .......jun
abc,     xyz,    1000,0,     0,    0...         0
actual
region, area,    jul,   aug, sep, oct .......jun
abc,     xyz,    500,   0,     0,    0...         0Thanks

Here it is
with d as ( select 1 ID, 'abc' Region, 'xyz' area, 200907 yearmonth, 1000 sales_target, 500 actual_sales from dual
union all   select 2, 'abc',    'pqr',   200908,       2000,         1500 from dual
union all   select 3, 'mnr',   'xyz',   200907,       3000,          2000 from dual
select region, area,
max(case extract(month from to_date(yearmonth,'yyyymm')) when 7 then sales_target
else 0 end ) TGT_JUL
max(case extract(month from to_date(yearmonth,'yyyymm')) WHEN 8 then sales_target
else 0 end ) TGT_AUG
max(case extract(month from to_date(yearmonth,'yyyymm')) WHEN 9 then sales_target
else 0 end ) TGT_SEP
from d
group by region, area
REG ARE    TGT_JUL    TGT_AUG    TGT_SEP
abc pqr          0       2000          0
mnr xyz       3000          0          0
abc xyz       1000          0          0You can copy and replicate the results for another one - actual_sales.

**How to use Logic as a sound module with an MPC?!?!**

So I'm new to Logic, I love the program but don't know a thing about the environment... I've seen people discuss this a lot on the forums but I still haven't been able to figure it out.
Basically, I am using an MPC 2500 and would like to use Logic as a sound module.
I know you have to create a new multi track instrument in the environment but as a newbie I just can't seem to put the pieces together. I tried and tried but when I create a new instrument all I get is a box with 16 channels!?
Does someone have a similar setup? Would anyone mind sending me their environement?
MacBook Pro Mac OS X (10.4.7)

Pictures worth a thousand words and stuff:
http://bj.angeltowns.com/images/log_cs.jpg
Here I've disconnected the physical input object from the sequencer object (called "to recording & thru")
I've created a channel splitter object, and cabled the physical input object to it. I'm now in the process of option-clicking the channel splitter's output cables (one for each MIDI channel) - ()option-clicking the output cables is a shortcut way to cable to objects on different layers) - and selecting channel 1 (and thus cable 1) to go to Audio Instrument 1, channel 2 (cable 2) to Audio Instrument 2 etc.
So the MIDI comes in to Logic, gets split into individual channels, and each channel goes to it's own audio instrument via a cable, which you can put any plugins on.
You can't record into Logic this way now, as we've bypassed the sequencer, but I think you need it simple at this stage

Payment of travel and subsistence with FI using bank details in HR module

Similar Messages

Maybe you are looking for