Payment processing is taking forever

Payment processing has been going for 20 minutes now? It says not to restart or refresh, but this is a little rediculous?
Any advice?
Thank you,
WB

Hi jennadame,
Please contact support @
https://helpx.adobe.com/contact
Regards,
Sheena.

Similar Messages

  • ITunes 8 taking FOREVER ( 12 hours) to process artwork thumbnails

    Anybody else seeing this? Its taking forever to process the artwork thumbnails. It looks like its going out on our shared drive and processing all the media on all the computers on the network (~300GB). Or at least those that are shared. I can't tell for sure because the spinning color wheel of death won't pause so I can see what is going on.
    Next question is will each of the computers in the house go through the same painful process with the shared media when upgraded to iTunes 8?
    What an idiot I was. 8(

    Same problem here (http://discussions.apple.com/thread.jspa?threadID=1701877&tstart=0). What worked for me, finally, was to quickly hit Stop before the spinning ball appeared and I then checked off for this never to happen automatically in the subsequent dialogue window. It seems to get hung with albums that start with S.

  • I was having problems with my iPhone 5s. Was able to get another 5s. In the process of setting it up, but it is taking forever ... and it seems to be frozen at one particular place.

    I was having problems with my iPhone 5s (couldn't receive iMessages or emails). Cell company tried "fixing it" but to no avail. They ordered me a repacement 5s. Trying to set up, but it is taking forever. Seems to be stuck in one particular spot. It's at the stage with a black screen, white apple icon and a bar underneath. The bar is is just a fraction complete, and it has been stuck in this spot for almost an hour. Tried to restart it but it went to the same spot and froze again.

    BOB we need you urgently
    Perhaps Bob will see this thread, he is the professor in these cases.
    You do not use a WEP password but wpa/wpa2 on router and equipment.
    All equipment connects to WiFi, but for your iPad.
    Even with all other equipment WiFi off, you cannot connect your iPad.
    Your iPad connects to other WiFi nets correctly.
    All resets etc done on iPad and Router.
    Still I am not sure it is your router for sure, frustrating...
    I want to test 2 other things:
    1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
    2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

  • After installing SP3 for BO XI R1 - Crystal Reports taking forever to run.

    Hello,
    We are running BO XI R1 SP3.  Ever since installing SP3 a number of our scheduled Crystal Reports are taking forever to run.  The Business Objects server resources are okay, CPU never really gets above 50% so I figure perhaps it's our SQL Server.
    We run SQL 2005 and CPU on that hovers around 30%, we've got 4 2.6GHz CPUs with 16GB of RAM.  Looking in SQL Server activity monitor the reason the reports are taking some time is that the wait types are generally CXPACKET.
    For example a report used to process in a minute however after installing SP3 the report now takes several hours.  Since we've 4 CPU's on our SQL Server activity monitor creates four sessions for the report to try and process it in parallel.  However all of those four sessions have a wait type of CXPACKET.  This I understand is related to parallelism and people have said to reduce that so nothing runs in parallel.
    However I should not have to do that as things used to run just fine, there is no physical reason (i.e. RAM / CPU / HDD) that reports are locked waiting in SQL server.  Has anyone else had this issue or have any suggestions on how to fix please?
    Kind regards,
    Chris Rutherford

    XIR2 has two different redistributable MSI packages.  One is compatable with 1.1 framwork applications and the other is compatable with 2.0 framework applications.
    try downloading the SP3 MSIs from [here|https://smpdl.sap-ag.de/~sapidp/012002523100009656792008E/crxir2sp3_net_si.zip]
    this will have both MSIs
    - CrystalReports11_5_NET.msi          (for 1.1fwk applications)
    - CrystalReports11_5_net_2005.msi   (for 2.0fwk applications)
    rename the CrystalReports11_5_net_2005.msi to CrystalRedist115_x86.msi and replace the existing file in the Bootstrapper folder path
    Uninstall the last install, rebuild and try your Click-Once install again.  This time you should have the 11.5.3700.0 runtime.
    Dan

  • Okay so I just got a new MacBook and I'm setting it up. I decided to not download all of my files to iCloud drive and its taking forever to load to the next page. Is this normal for it to take so long? After all I didn't even download my stuff?

    why is it taking forever to load!?

    The files you are loading into the new computer are by wi-fi? If you have no other option
    that may be OK but slow. A faster method would be Ethernet cable from internet router
    or modem, instead of wireless. Most of the setup process can take some time.
    What are these files? Where are they now?
    Do you have a backup on-site, & not online?
    Did you check to see if the operating system was updated as part of the setup before use?
    The Software Update can locate later parts to the as-shipped system, that may be needed.
    Other upgrades or new apps are through the Mac App Store, some through App Store, etc.
    As part of the setup, you could use a migration assistant if you have a backup from the old
    computer or have other files saved in an external hard drive to import.
    Hopefully your process won't be drawn out too long...
    Good luck & happy computing!

  • Restarting taking forever after Security Update 2014-002

    I just downloaded Security Update 2014-002 and my Mac Mini is taking forever to restart after the download and installation process finished. I'm running the latest version of Mavericks and my Mac is stuck on restart! What should I do?
    Need help! Thanks.

    Tap the space bar on your keyboard once. The dispaly may be sleeping.
    The first restart after the update here was longer than usual but I restarted one more time, it was back to normal boot time.
    After the restart, open the App Store then select Updates from the menu.
    It should say:  Verio 1.0 Installed Apr 22, 2014

  • My 2009 24" iMac, taking forever to boot...help!

    I need help and some advice on my 24" (2009) iMac running OS 10.7, my computer is taking forever to boot up. I was downloading MS Word 2011 via wi fi and then it froze. I shut the computer down by pressing the power button and restarted the iMac up again, the chime came on and the Apple logo is up with the wheel turning, I thought it was booting up...Well an hour has passed and the the screen with the Apple logo and wheel is still turning! I shut down the computer again and power it up again while holding down the Option key. Two icons came up, one for he HD and the other Recovery HD...I click the Recovery and select Disk Utility. I then select the Mac HD and clicked Repair Disk. After it went through that process of repairing, I then selected Repair Disk Permission. After that was done, I selected Restart from the Apple icon on the upper left corner. Again the Apple chimed....the screen and Apple icon and wheel is still spinning...No good the same screen with Apple icon and wheel continued to spin and nothing else is happening. Hope someone can help me out. Thanks.

    As a test you could try booting with the install disk that came with the iMac (disk in drive and startup holding down the 'C' key). If it boots it's likely a good sign that it's an OS rather than hardware problem and that Eric Ross's suggestion of re-installing the OS is the next step.
    If you haven't got a back up (hope you have) you can re-install using the Recovery HD but it would mean re-downloading Lion (you don't have to pay again).

  • Automatic Payment Process through Schedule Manager

    Dear Experts,
    I am an infant in SAP..just started my foot steps by formally taking up a sap course from siemens. I would like to get a complete configuration details for the scheduling automatic payment process. The scenario I could think of is a weekly payment run for a company code at 7.30 pm..Please help.
    Thanks,
    Aspirant

    Hi,
    In FBZP you need to do the config. for the automatic payment.
    1All co codes:fill the paying co code.
    2)Paying co codes :give Min and Max amount for payment and form payment advise.
    3)Payment methods in country :In country creat the p.method
    eg: for cheque :pay method 'c',select outgoing payments,check and give document type for paymentand under apyment medium program 'rffous_c'
    4)payment methods in co code:give the same pay method (c)in your co code here and amt lmt and form for payment medium
    5)bank determination:give the bank details i.e crcy,paymethod,house bank,account id,bank sub account,available amts etc.
    6)house banks:give the detials of your bank account.
    there will be no schedule job for f110.
    Further you need to configure check lot,house banks for this.
    regards

  • Time machine to airdisk taking forever...maybe a gig an hour

    So I set up my Airport Extreme Airdisk as a Time Machine disk. I started the first backup and its taking forever...if I am lucky its sending a gig an hour on an 802.11n machine.
    Any thoughts?

    It seems that Time Machine uses Apple's disk imaging mechanism.
    The version of this in Leopard uses a helper app called diskimages-helper. You can see it in the process list of Activity Monitor when running Time Machine, Disk Utility or Carbon Copy Cloner disk imaging.
    This app seems to have issues with images larger than around 80GB. I have now shown that whether started by Time Machine, Disk Utility or Carbon Cloner images between 120 and 200GB run flat chat (disk limited) for the first 80GB or so and then slow down dramatically.
    How much data are you trying to backup?
    On the upside, once the first copy is made. incremental Time Machine backups seem to be very fast. Perhaps if you set time Time Machine with enough exclusions to get the first image down to 80GB, it may be possible to add the rest later. I have not tried this.
    On the topic of should you use an airdisk: I see that it is a requirement that the backup disk/share supports ACLs. I think Airdisk might be OK for data files, but probably will not restore a full working boot disk. Have you tried that?
    Bill Northcott

  • Migaration is taking forever to finish

    I got my new aluminum macbook yesterday. I set up my old G4 to migrate the new one. I let it work over night and not much had been done. I restarted the process and tried again. It is still taking forever to transfer. I only have around 28 GB to tranfer.
    How long is this process supposed to take?
    Do I need a new ethernet cable?

    Welcome to Apple Discussions!
    How long is this process supposed to take?
    Your mileage may vary, but comparably speaking, forever. Unfortunately the Migration Assistant was not designed to work 100% well between PowerPC and Intel Macs even when Firewire was possible. Cancel the process and use the one described here, albeit with a simple ethernet network and simple data transfer from shared drive, since Target Disk Mode is no longer a possibility with the new aluminum MacBooks:
    http://discussions.apple.com/thread.jspa?threadID=435350
    Message was edited by: a brody

  • Emptying Trash Is Taking Forever!?!?

    I'm trying to empty my trash bin and it is literally taking FOREVER! At the pace it is going it could take weeks... Is there something which may be slowing this process down or a way to make it clear at the trash bin faster?
    Thanks!

    How much data is in your trash?
    If you have several gigs of data, it could take a while, especially if you're using secure empty trash.
    In finder, open preferences and click on advanced. Confirm that Empty Trash securely is not checked.

  • FormsCentral Payment Processing Form.

    FormsCentral site mentions a Payment Processing Form.  Where is it?  It's not in the Templates.
    Accept payments
    Create forms and accept payments, donations, and online orders.
    Accept payment by credit card or PayPal.
    Simplify taking payments, donations, or online orders.

    Payments can be added to any form. This document explains how to set it up for your forms:
    http://forums.adobe.com/docs/DOC-1632
    Randy

  • Projects on one drive taking forever to load /conform, while projects on other HDDs are fine

    Hi guys, I'm at a bit of a loss here.
    I have a Core i7 Win 7 ultimate 24gb ram running premiere cs5.03
    I have a ssd drive for os and progs (C), and then 4 other identical 2tb drives for projects. (D,E,F and G)
    I have about 8 projects per drive, all the same thing (wedidngs)
    I have my last wedding of 2011 to get edited, and it is on the F drive.
    I dump all the folders into the project window, but the conforming stage is taking FOREVER (3+ hours and I gave up, an average wedding all the files conform in a few minutes)
    The file types are h264 .mov from canon DSLRs by the way, but I have discovered that it must he a problem with my F drive.
    At first I thought it was settings issue with CS5 (media cache folders etc..), so I tried changing the media chache drives etc... but nothing helped
    Then I tried to open a previous CS5 project that was on the F drive (a project I completed just one week ago) and it just hanged on the loading screen (20 mins and I gave up)
    It is strange as the drive isn't nearly full, plenty of space on it (in fact my E drive is nearly full but I can still open all the projects on taht and they load up in the normal time frame)
    Nothing else is on the drive, just project folders, the same size and type of projects that re aon all of my other drives, they all work fine, but now all of drive F seems 'corrupted'?
    So it seems I have a problem with my F drive (D, E and G are all fine)
    I don;t know what the problem is or how to identify it.
    I am currently doing the error checking process then I will defrag.
    The bizarre thing is, nothing has changed, last week everything was fine, this week I have a problem with that one drive.
    I've read online that it helps to have separate sratch disks for video, audio, previews etc...
    But with my yearly workflow, it is better for me to just have the whole project (video, audio, previews etc..) on the same folder in the same drive.
    This has worked great for the past 6 months, but all of a sudden, any old projects on the F drive hang on the loading page, and any new projects take more than 3 hours to import / conform?
    I've tried my best to explain the problem but reading it back my description does seem a bit all over, I guess that's becuase my mind is all over the place due to this problem!
    It's my last wedding from 2011 and I cannot get the project started (been at it all day, havent got any editing done, just trying to solve this)
    So if anyone has any tips or advice on how to identify the problem, confirm if it is a HDD issue or premier issue (I think HDD as all other projects on the other drives are fine) I would greatly appreciate it.
    Thanks
    James

    Powered by Design wrote:
    I was just looking back at my copy of the drive and I was able to save 110GB of data
    For some reason I think I might have missed some but its to late now since the drive will not spin up anymore.
    If you do go this route make sure to do it all at once.
    I think I might have waited between tries but can really remember, it was a long time ago and I try to keep better back-ups now.
    Glenn
    Hi Glenn,
    Thanks so much for your responses,
    "I then froze the drive and as soon as I took it out started copying the files to a new drive.
    Running CPU-Z or Speccy I could monitor the temp of the drive.  As the temp went back up the speed of the drive slowed till I could not copy any more.  I just repeated and kept going till I got all the data off.
    I still have the drive but even freezing cant geet it back up and running now.
    Its not a good meathod since it will ruin your drive but its free and might work."
    Sorry I ma not reallt sure on the internal worksings of HDDs, can ask you to explain what this is?
    Thanks again for your help
    James

  • Apple TV sync is taking forever- Will this happen each time I sync?

    I just got a new Apple Tv. I am syncing 12 movies from iTunes and about 650 songs. This is taking forever! My question is, if I add a new movie to iTunes and want to sync it to AppleTv, will it take this long again? If I uncheck the rest of the movies for syncing, will it erase them from the Apple Tv? I do not think I can wait this long each time I want to add a new movie to the Apple Tv. Thanks in advance for you help.

    I just bought an Apple TV and began experiencing this problem once I moved my iTunes library to an external drive. I have a MacBook Pro so I was quickly running out of room. I moved my library to an external drive that is attached to my Airport Base Station. But I'm having issues syncing and streaming. It begins to sync but goes on and on and doesn't stop. Even when I try to stream the content it constantly stops to load and repeats the process again and again. My external hard drive is a 1TB Western Digital USB 2.0.
    I've read about a lot of syncing issues so far. If this continues I'm going to simply return it because it really doesn't do what it claims it should do very well.
    Is this a software issue? Is it because I moved my iTunes library to an external drive? Even when I play videos on my computer it still has issues playing back.
    Any feedback would be greatly appreciated.

  • Importing assets to Encore taking forever to import

    Importing large (~8GB ea) mpeg videos as "timeline: assets into Encore and it's taking FOREVER. Is there a way to "link" the video clips like inDesign does with it's assets? How come it takes so long for these video clips to import, especially since they aren't even transcoded yet? It shouldn't be copying them, right? I tried saving my Encore project in the same folder as my mpeg clips hoping it would "see" them and import quicker but that didn't work.
    Thanks.

    Video clips file type: Movie Clip (.mpg), 1290x720, 59 FPS.)
    Not 1280x720? And the 59 is 59.94?
    Did you transcode them from something else? Or are these your source clips.
    Encore prefers demuxed files (m2v and wav, for example), not mpg with the video and audio in one file.
    Also, Encore must examine the file and do a type of indexing.
    No, it doesn't help to try to keep the Encore folders with the assets, because Encore creates its own folders.
    What does help is having the xmpses and such files that Premiere or AME would generate.
    But yes, these are very large files, and it will take Encore some work to process them.

Maybe you are looking for