Payment program F110 - select wrong Bank Account ID

Hi,
I have created a new bank account for an existing House bank (in trans. fi12)
When we run the payment program F110, the wrong bank account is mentioned in the DME file.
It shows the first one on the list and not the last one.
How can I create a DME file with the new bank account?
Thank you for your feedback.
Kind regards,
Linda

Hi Eric,
When I go in transaction FBZP, and drill down to Bank accounts, I only find the first bank account ID (which is the wrong one).
I assume that if I add the new one, it will work?
Kind regards,
Linda

Similar Messages

Automatic Payment Program-which of the bank accounts is chosen for payment

Hi Gurus,
I have a question related to Automatic Payment Program(F110). When Automatic Payment Program is run which bank account is chosen?
Is it the
1. Main Acount
2. Payment Sub account?
Also, why?
Kindly answer.
Regards,
Sagar

Hi Sagar,
In F110, the Payment Sub Account is selected for Payment(The Outgoing Bank Account). This is defined in FBZP in the node bank determination> Bank Selection> Bank Accounts.
The reason why this GL is selected is :-
1. When you make Payment: -
Vendor A/C...Dr.
To Outgoing Bank Account
2. Bank Reconciliation
Outgoing Bank Account Dr.
To main bank Account
The entry to the main bank Account is posted only when the information that the cheque is encashed by the vendor is sent by Bank in Bank Statement. The Main bank Account is the balance as per Bank Books. So, till the time, we do not receive info from bank that the cheque is encashed, the amount lies in Outgoing bank Account and it is transferred to main bank account only upon final confirmation from bank.
Regards,
SAPFICO

Bank details used in Payment program (F110)

Hi expert,
2 companies are working with the same vendor (in GB& BE).
In BE, new bank details for the vendor were entered.
When the company in GB wanted to make a payment run via F110, it immediately picked up the bank details of BE.
How can the correct bank details be derived by both companies?
Thank you for your feedback.
Kind regards,
Linda

Hi Brenda,
From my understanding, the bank account details are held at the general level and not the company code level, therefore even though your vendor is working in both company codes, the banking data for either company code are stored in the same place (LFA1). Hopefully that makes sense.
Now, when you are making a payment to a vendor using FB60 or MIRO, you have the option of selecting the bank account you want to pay. To do this, first you must set up the vendor, ensuring you put something into the BnkT field, on the vendor master. You can put a number in, or a country abbreviation or whatever makes sense to you. You can also put some information in there in the Reference Details field, to help you identify which bank account is which.
Now when you go to FB60 or MIRO, you should have a field called Part.Bank on the Payment tab. You can select the bank account there that you wish to pay, as long as you have set up the vendor properly. If you leave this blank, SAP will automatically allocate the payments to the default bank account, which I believe is either the first bank account or if you have left BnkT blank on the vendor master, it will default to that one. You can test this to see which bank account it defaults to.
Hope this helps,
Laura

Document selection in Automatic Payment program F110

Hi Experts,
Is is possible to use document number as selection criteria for automatic payment program (F110). Currently the options available are Vendor and Customer, In the "free selection" tab we can enter only one document at a time. Is it possible to select multiple documents for payment?
Thanks and regards,
Achal

Hi,
It is possible to enter multiple documents.
You can enter a list of single documents or in intervals.
Enter the document number in ascending order.
Ex:
Individual documents.
10001,10003,10011
If the documents are in a sequence you can enter the Interval like this
(10001,10011)
Hope it helps you
Regards
Andrew
Edited by: Andrew J on May 28, 2009 4:26 PM

Unable to select confirmed bank account as payment method

Customer service has been no help (not a surprise from what I read here). Have been paying my rent using confirmed bank account for almost a year. Suddenly, the only options I have are PayPal credit or my Visa debit card. This latter is linked to the same confirmed bank account but carries, of course, a $36.55 fee. Why has the option to continue using my confiemd bank account been removed? Thanks in advance for your time.

Hi Whychromo,
Thanks for reaching out to us here! We're sorry to hear about the trouble completing your payment using your bank account. Each time you make a payment from your PayPal account it goes through a series of filters to determine how much potential risk may be involved with that particular payment. If the system deems a transaction to be high risk then it may limit the funding options that are available or block the payment all together from going through. It sounds like this is what you may be running into here.
These filters are in place to help protect you from possible transactions occurring from your account by an unauthorized third party, or in some instances from potentially bad sellers. They look at things like payment history, log in location, and computer ID to help protect you. From time to time though we may come across a false positive where a legitimate transaction is being blocked.
Another thing that could be causing this is the number of payments currently processing from the bank account. If there are a lot of payments pending through the bank that have not completed yet, the system may limit the ability to fund further transactions using this account until some of these transactions have completed.
I hope this helps!
Erica

How to generate checks when executing Automatic Payment Program (F110)

Is it possible to generate checks automatically when I execute the automatic payment program? Will reward points to any suggestion. Thanks!

hi patrick
try this.....ur problem may solve.....
Create Automatic Payment Transactions (F110)
Purpose
Use this procedure to generate checks proposals or ACH proposals and then subsequently issue checks or set up ACH files to be transmitted to the bank.
Trigger
Perform this procedure when through either an ACH or a check, a creditor of the University needs to be paid.
Prerequisites
Open invoices with reached due dates have to be present in the SAP system.
Menu Path
Use the following menu path to begin this transaction:
·         Select Accounting Financial Accounting Accounts Payable Periodic processing Payments to go to the Automatic Payment Transactions: Status screen.
Transaction Code
F110
Business Process Information
The automatic payment process will be centrally managed in the Accounts Payable Office. The automatic payment program will be executed each day for all open invoices (across vendors) in the system. There will be separate payment run execution corresponding to each payment method category:
Check payments: clears the open invoices and issues a check output
ACH payments: clears the open invoices and issues an ACH file output
Foreign currency payments: clears open invoices but no output is issued
State/Grant payments: clears open invoices but no output is issued
The process steps executed during the automatic payment program are:
Enter Payment Parameters
Edit/review Payment Proposal
Post Payments
Generate Payment Medium (print checks or create ACH payment file)
Generate Positive Payment File
The payment parameters are entered in order to limit the open invoices and credits selected for payment. It is important to note that the payment terms that are defined on the invoice will drive whether a invoice is due for payment during the current payment run. During the payment program execution, the invoices that are due for payment will be presented to the user on a payment proposal list.
The payment proposal is a list of expected payments grouped by vendor account. Invoices that are due for payment but cannot be paid due to some kind of accounting or system error are listed as exceptions. Examples of typical exceptions are missing banking information (for ACH payments) and blocked invoices. Some payment exceptions will be resolved at the Accounts Payable Office. However the Department must resolve some exceptions. When these types of exceptions appear on the payment proposals, the Accounts Payable Office will inform the Department of the blocked payment in order to get a resolution. Key personnel in the Accounts Payable Office will be the only resources to have access to the editing function of the payment proposal processing. Typically, there is no business reason the edit or change a payment proposal. Editing options for a payment proposal includes: changing the default disbursing bank account information or changing the payment method.
After the payment proposals have been reviewed and edited, the proposals are posted as payments. It is important to note that any open credit on the vendor's account is also taken in consideration when creating the vendor's payment. The payment method supplement defined on the invoice will drive the check sorting.
In addition to the printed check output, the payment program run produces an ACH file and a Positive Pay file. Both files are sent to the bank for further processing. The ACH file contains the vendor's payment and banking data. The Positive Pay file contains the check data (check processed, voided, etc) and is used for confirmation of payments.
Helpful Hints
·         The R/O/C column in the field description tables below defines whether the field is required (R), optional (O), or conditional (C).
·         On certain screens you may have to scroll to view some data entry fields.
·         Click the tab to view the current overall status of the payment process by viewing the informational messages.
Procedure
1. Start the transaction using the menu path or transaction code.
    Automatic Payment Transactions: Status
2. As required, complete the following fields:
·         Run date
·         Identification
3. Click the tab.
The payment program parameters are used to limit the program's selection of open invoices and credits.
    Automatic Payment Transactions: Parameters
4. As required, complete/review the following fields:
·         Posting date
·         Docs entered up to
·         Company codes
·         Pmt meths
·         Next p/date
·         Vendor
5. Click the tab.
Free selection criteria are extended parameter selection criteria used to limit the open invoices and credits selected in the payment run.
    Automatic Payment Transactions: Free Selection
6. Perform any of the following:
If You Want To
Then
Select data by a particular field value; use the match code on the Field Name field to obtain the required field
Enter the required field value to be considered in the payment program selection of open items. The field value is entered in the Values field
Payment selection can be based on fields on the invoice or credit memo document or fields on the vendor master.
Example: A (AP payment block)
Exclude the open items that match your field value
Select to the left of Exclude values.
Include only those open items that match your field value
Deselect to the left of Exclude values.
7. Click the tab.
This information is used to expand the information that is automatically recorded in the payment run log. The payment run log is used to diagnose any program errors during the payment run.
    Automatic Payment Transactions: Additional Log
8. Perform the following:
If You Want the Payment Program Log to Record
Then
Information on due date check
Select to the left of Due date check.
Activate this option.
Any payment method selection data
Select to the left of Payment method selection in all cases.
Activate this option.
Line item information the payment documents generated upon posting the payment proposal
Select to the left of Line items of the payment documents.
Activate this option.
9. As required, complete/review the following fields:
·         Vendors (from)
·         Vendors (to)
Enter the same vendor account number range for Accounts required section of the transaction.
10. Click the tab.
The specifications defined in this section of the transaction inform the payment program the correct form to use for check printing and the correct payment file format to use for ACH payments.
    Automatic Payment Transactions: Printout and DME
11. As required, complete the following fields:
·         RFFOAVIS
·         RFFOUS_C
12. Click the tab.
    Exit editing
13. Click to save the data.
If you want to delete the payment program parameters entered, select Edit Parameters Delete.
    Automatic Payment Transactions: Status (2)
The system displays the message, "Details have been saved for the run on XX/XX/XX XXXX."
14. Click .
If you want to refresh the screen in order to view the current status (processing step) of the payment program click at any time.
    Schedule Proposal
15. Perform one of the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
16. Click to process the payment parameters and create a payment proposal.
While the payment program is selecting and processing data, the status will display the message, "Proposal is running." When the payment proposal has completed and is ready for review/edit, the system will display the message, "Payment proposal has been created."
    Automatic Payment Transactions: Status (3)
The system displays the message, "Proposal run has been scheduled."
17. Click .
    Automatic Payment Transactions: Status (4)
The system updates the status, "Payment proposal has been created."
18. Perform one of the following:
If You Want To
Then
Go To
Execute the payment run
Click .
Step 19
Edit the payment proposal
Click .
Step 43
Display the payment proposal
Click .
Step 54
Display the payment proposal run log
Click .
Step 57
Delete the proposal
Select Edit Proposal Delete.
Step 60
Display the proposal list in a printer friendly format
Select Edit Proposal Proposal List....
Step 62
Display only the exception (error) invoices or credits
Select Edit Proposal Exception List....
Step 67
Exit this transaction
Step 72
    Schedule Payment
19. Perform the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
20. Click to process the payment proposal and post the payment documents.
While the payment program is selecting and processing data, the status will display 'Payment is running'. When the payment proposal posted the status will display 'Payment run has been carried out. Posting orders X generated, X completed. (X will represent the total number of checks produced).
    Automatic Payment Transactions: Status (5)
The system displays the message, "Payment run has been scheduled."
21. Click .
    Automatic Payment Transactions: Status (6)
The system updates the status, "Payment run has been carried out." If you click after seeing the status update, "Payment run has been carried out", the system will display an update to the status, "Posting orders: XXXX generated, XXXX completed."
22. Perform one of the following:
If You Want To
Then
Go To
Review the payments posted
Click .
Step 23
Display the payment proposal
Click .
Step 26
Display the payment proposal run log
Click .
Step 29
Display the payment list in a printer friendly format
Select Edit Payments Payment List.
Step 32
Display only the exception (error) invoices or credits
Select Edit Payments Exception List.
Step 36
Print the payment run information
Click .
Step 40
Exit this transaction
Step 72
    Job Log Entries for F110-XXXX-XXXX / XXXX
23. Review the displayed information.
24. Click .
25. Return to Step 22.
    Display Payment Proposal: Payments
26. Review the displayed information.
27. Click .
28. Return to Step 22.
    Job Log Entries for F110-XXXX-XXXX-X / XXXX (2)
29. Review the displayed information.
30. Click .
31. Return to Step 22.
    List Variant
32. Click .
    Payment list
33. Review the displayed information.
34. Click .
35. Return to Step 22.
    List Variant (2)
36. Click .
    Payment list (2)
37. Review the displayed information.
38. Click .
39. Return to Step 22.
    Schedule Print
40. As required, complete/review the following fields:
·         Start date
·         Start immediately
·         Start time
·         Target computer
·         Job name
41. Click .
42. Return to Step 22.
    Accounting clerk
43. Click .
    Edit Payment Proposal: Payments
44. Review the displayed information.
45. Perform one of the following:
If You Want To
Then
Go To
Continue with the payment process
Click .
Step 18
Review/edit invoice information for the payment (invoice numbers, discounts, payment amounts, etc).
1. Click on the line you want to select.
2. Click .
Step 46
Change the key payment information (payment method, house bank, payee name and address, etc.)
1. Click on the line you want to select.
2. Click .
This option does not work for lines that have exceptions.
Step 51
    Edit Payment Proposal: Open Items
46. Double-click on the line you want to choose.
    Change Line Items
47. As required, complete/review the following fields:
·         Payment block
·         Discount amount
·         Cash discount %
48. Click .
49. Click .
50. Return to Step 45.
    Change Payment
51. As required, complete/review the following fields:
·         Payment method
·         Pmt meth.supl.
·         Due date
52. Click .
53. Return to Step 45.
    Display Payment Proposal: Payments
54. Review the displayed information.
55. Click .
56. Return to Step 18.
    Job Log Entries for F110-XXXX-XXXX-X / XXXX (3)
57. Review the displayed information.
58. Click .
59. Return to Step 18.
    Delete proposal
60. Click .
    Automatic Payment Transactions: Status (7)
The system displays the message, "Data and log deleted."
61. Go to Step 72.
    List Variant (3)
62. As required, complete the following field:
·         Variant
63. Click .
    Payment list (3)
64. Review the displayed information.
65. Click .
66. Return to Step 18.
    List Variant (4)
67. As required, complete the following field:
·         Variant
68. Click .
    Payment list (4)
69. Review the displayed information.
70. Click .
71. Return to Step 18.
72. Click until you return to the SAP Easy Access screen.
73. You have completed this transaction.
Result
You have executed a payment proposal, executed and posted a payment run and printed checks.
reward me points.......dont forget

Selecting the Bank account from Vendor master when APP is run

Good Morning.
I have a scenario where a Vendor with Multiple bank accounts in the vendor master
Bank account 1 - HSBC UK
Bank account 2 - RBS UK
Bank account 3 - Bank of America US
I need to make a payment for a purchase made from US and he chooses the payment to be made directly to the BOA US account. when running the payment run, can i select the bank account to which the outgoing payment is sent to? using Automatic payment program or manual outgoing payment?
Thanks in advance
Shankar

Hi Gowrishankar,
You can change the house bank while runinng the Payment Program in F110.
Please follow the below steps for your requirement.
F110 --> give the parameters & save. > click on Edit Proposal> Double click on vendor ( it will give you the due invoices tobe paid) --> double click on the invoice document which you want to pay in BOA US > Click on Reallocate button> give payment menthod , House bank , account ID and save.
The next subsequent steps are normal.
Thanks & Regards,
Shashi Kanth.

Payment program - f110, restricting number of invoice to be paid by vendor

Hi Gurus,
I have a requirement to restrict the payment program to select and pay only 10 open items in one vendor. if one vendor is having more than 10 open items system should automatically select first 10 open invoices to be paid and the excess open should be selected in other payment run.
Is there any option available other than manully block the open invoices more than 10 and run the payment run.
Please advise me on the configuration steps.
Thanks in advance.
Suresh

Hi,
We can restrict in 3 ways.
1. Before Payment Run enter Payment Block Reason in each Open Item.
2. In Edit Proposal we can assign Payment Block Reason in each Open Item.
3. In F110 screen, in Free Selection Tab select Field Name as Document Number and enter document nos to which you want ot run APP.
Might be these solutions will be useful for you.
Thanks
Chandra

Payment program F110 not generating IDoc

Hi All
while running payment program F110 I get a sucess message IDocs generated for company code and payment method, In the payment log i see this infomation.
when i check these IDoc's in WE02 I can't find any of these IDoc's. It looks to me the program RFFOEDI1 with the variant I created is not getting executed in spite of the check box "Generate IDoc" being checked.
can any one suggest what would be wrong?
Thanks
Pranav

Hi All,
Thanks for the quick response. Following are the config made with forms;
In Paying company code setup:
    Form for payment adivce: F110_US_AVIS
    EDI accompanying sheet form: F110_EDI_01
In Payment method in company code:
    Form for payment medium : F110_EDI_01
    Next form : F110_US_DTA
I have checked with all other configuration and seems to be in place. Please let me know if these config regarding forms are correct.
When I run the program REFFOEDI1 with the variant I created these IDocs are getting generated. These are not getting generated when I run the payment program F110. I am missing some thing which is not triggering this program from payment program. Please let me know if you have any suggestion.
Thanks
Pranav

Payment program F110 msg FZ618

When multiple payment documents does NOT have a payment method, the payment program F110 will stop any checks over 100K and displays message FZ618: > Payment amount is not within the limits allowed ( 0 - 99,999.00 ).
But when the payment document has a C, it will allow multiple payment documents to be combined into a check over 100k, this is NOT what we want. They want to continue to supply a payment method in the document and so we need to change the program to not allow checks over 100k no matter what the payment method is in the vendor or document.
Is the program that we need to change LF11MF01? Or what is the correct program we need to modify?

Solution: FBZP, add value to distribution amount in payment method by company code.

Vendor Tolerance Group in automatic payment program F110

Hi Experts,
We use automatic payment program F110 for payment to vendors. We want to define different tolerance group having different grace days to vendors.
e.g. Vendor 1 having tolerance group with 5 days as grace period
Vendor 2 having tolerance group with 10 days as grace period
Is it possible to have different grace days for making payment through F110. We donot want to make manual payment.
Thanks & Regards.

Hi,
Please refer this link:
F110 Payment run Problem
Regards,
Pramitha.

Related to automatic payment program (F110).

Hi!!
Issue is that :
SAP Automatic Payment Program :F110 creates payment in compliance with country.The has to be saved on SAP server....
(Payments run per company code)company code 230-->>create DME file >> (format per country)BACS (UK)>>then saved to sap server.
I want to know what all has to be done to perform the task & in which format it will be saved to SAP server.
Please reply soon!!
Thank You
Amit.
Edited by: Amit Kumar Singh on Feb 25, 2008 1:14 PM

Please reply soon!!
Thank You..
amit

Payment Program F110 is not creating spool

Hello experts,
We are very close to the go-live and facing a major issue with Automatic Payment Program F110. We asked the dev to design Z check form for F110. Our form works well with manual Run ( F-58), we can see spool as well as print but when we Run the F110 the same form does not create any spool nor print anything. Even though its create the check, done the posting but no spool no print. The error we are getting it is 'No printer fonts maintained for Message no. TD327' . IT people sets all the fonts but no luck.
appritiate the comments.
Thanks

Hi,
take a look on this sap note.
i hope it help you.
Regds
Note 391852 - Message TD327 (No printer fonts maintained for &)
Summary
Symptom
The system displays error message TD327 (No printer fonts maintained for &) during the print although the device type of the printer has a base device type with printer fonts.
Additional key words
IW31, IW32, IW3D, IW21, IW22, IW23
Cause and prerequisites
The device type has not separate printer fonts but inherits them from the base device type.
Solution
Implement the program correction as specified in the

How to make the invoice number a hotpsot in Payment program F110

Hi,
In the standard Automatic Payment Program F110 when we do a payment run and see the list of proposed Invoices that will be cleared - the requirement is to allow the user to double click on the invoice number and it should go to FB03 or MIR4 depending on if it is a Non-PO or a PO invoice. Is there a way to do this with out doing an implicit enhancement point.
Regards
Ravi

Hi Ravi,
I don't think it so it is possible in F110. You can copy the document number from F110 and go to FB03--Document list, paste all the document number from there you can double click on the document to see the full details.
Br,Vivek

Reasons for not creating a DME file in the payment program (F110)?

Hi,
I am using the payment program F110 for customer payments.
A payment run was carried out:
Parameters have been entered. Payment proposal has been created. Payment run has been carried out. Posting orders: 17 generated, 17 completed.
However, the DME file was not created.
What could be the reason?
Thank you.
Kind regards,
Linda

Solved.
Someone has changed the variant of the payment program.
The DME file name had disappeared.

Payment program F110 - select wrong Bank Account ID

Similar Messages

Maybe you are looking for