Payment proposal has been created - error

Hi Gurus,
I have an issue in F110. I currently have 2 payment methods set up i.e. method E - Electronic and method T _ Telegraphic. Both were working until yesterday. Today, only method T works , and the only obvious difference is that no variant is selected for this method in print-out/medium.
The proposal merely stops at "Payment proposal has been created""
Any ideas?
Regards

Have you checked that both payment method area assigned in the variant in "Printout" tab.
Also do a "Printout" again and check the logs.
Regards,
Gaurav

Similar Messages

F110 - Payment Run has been released error

Hi,
When we are executing payment run F110, after parameter entered & payment proposal is created it gives an message payment run has been released without
payment proposal edited & payment run carried out.
pl. help me in this regard.
thank u
regards
santosh

hi Chenu,
thanks for reponse immediately, can u kindly tell in detail why it will go to released state and how to overcome this problem, it happen occassionally not regularly.
thank u
regards
santosh

Problem In F110 with status message " Payment run has been released "

Dear Friends,
We have an Strange issue in payment program...
While executing the payment program they got below Status Messages
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
*Payment run has been released 13.05.08 15:42:58
Program ends up without single payment....While trying to Delete the Proposal or Payment those selection are in grey color (Deactivated Mode) ...
With same parametrs we have tried to run another payment run but there is no proposals selected...
Question :
1) How can I delete 1st Payment Run Proposal as well as Payment ID's
Could you please Advise Neccessary actions which is required for solving the issue...
Thanks in Advance
Regards
Suresh Polineni

You can delete the payment run proposal in the following sequence
1) first delete the output file
Edit-Payments-Delete output
2) delete the proposal file
Edit-proposal -Delete
3) if u want delete the parameters also in the similar way.
for digging the problem why the payments are not happened, just check the exceptionals list then u can easily catch the error point.
I hope it will provide some clue to clear your problems.
Regards
Madhav

F110 APP run - Payment run has been scheduled, but job was not released

Dear Friends,
We have made payment parameters, payment proposal, edit payment proposal and it was working fine upto that stage.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
But when we selected payment run, immediately it showed the below status:
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Also I'm not able to delete the Payment run made, fields are in disabled mode.
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.

Dear Supriya,
Thanks a lot for your immediate response.
Still the same problem is existing even after one and half hours.
ie.,
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Could you please let me know which Tcode we have to go to release this inorder to solve this issue.
As it is in the production client, it would be really helpful if you could let me know the details at the earliest.
Thanks again.
Regards,
Dwarak.

Payment run has been cancelled F110

Hi Experts,
Would like to ask possible reasons the following status is displayed in F110.
"Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been cancelled
Posting orders: (X-1) generated, (X) completed."
Why does posting/payment were still created even if it is stated that "Payment run has been cancelled". What are possible reasons the payment run was cancelled.
Thank you very much in advance.

Hi,
With reference to the belowstatus which you have provided,
"Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been cancelled
Posting orders: (X-1) generated, (X) completed."
Once you edited the Payment Proposal, then sytem displays a message Payment proposal has been edited
After that only you have cancelled the Payment Proposal, then sytem displays a message Payment run has been cancelled
Once you cancelled the Payment run system won't generate any posting orders.
Please try to replicate the same once again, you won't get this again.
Thanks
Chandra

Running F110 with message "Proposal has been released 07/22/10 06:42:33"

Dear experts,
When I made proposal through F110, it shows me "Parameters have been entered", then after setting the related parameters, I tried to run Proposal with check on "Start immediately", then the message "Proposal has been released 07/22/10 06:42:33" appears, I also check SM37, but I can not get the spool list.
What could be the reason?
Thank you!

In the first tab of your F110 screen, you'll get the status of your processing. It will update for each event. Check if you are getting things like the following.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been carried out
Posting orders: 1 generated, 1 completed
If you are not getting any of the above, you can check that step and analyse the log.
Since you are getting as released, i think the proposal run has not carried out.
Ravi.

There has been an error creating the personal site. User cannot be found

Few of my Domain Users are able to create MySite and few of them are not, though they are having same permission.
There has been an error creating the personal site. Contact your site administrator for more information.
Event Viewer is showing :
My Site creation failure for user 'DOMAIN\username' for site url 'http://10.31.2.9:46744/personal/username'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create
the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
Below are the DLL versions of my installation.
Microsoft.SharePoint.Portal.dll : 12.0.6420.1000
Microsoft.SharePoint.Portal.dll : 12.0.6422.1000
Please suggest.
Thanks in Advance

Please note for future reference that you should only ever post any one question ONCE.
Posting it twice means that there are parallel threads and peoples time is wasted.
Here one copy was posted as a new thread and the other copy was posted as a reply in another thread *which had already been closed by the Original Poster years earlier*.
You should not in any case add new questions to existing threads and especially not to old, closed, threads.
I have therefore deleted that other copy of this post. This is now the only place that people will see your question and the answers to it (which is how it should be).
Moderator pre-2010 forums
SP 2010 "FAQ" (mainly useful links):
http://wssv4faq.mindsharp.com/default.aspx
WSS3/MOSS FAQ (FAQ and Links) http://wssv3faq.mindsharp.com/default.aspx
Both also have links to extensive book lists and to (free) on-line chapters

Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas Nowak

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

When user click "My Site clicking My Content states: There has been an error creating the personal site. etc

Hello community
    Using Sharepoint 2010 Server and the UI on its intranet there is a My Site. After creating the My Site the user account that created the intranet easily can create it's My Site, My Content and My profile. But when I logon as
a user
when I try to create the My site I get an error stating" "There has been an error creating the personal site. Contact your site administrator for more information". In the Event viewer log pasted below it says: A failure was encountered
and User cannot be found. So I check the UPS Synchronization and I can find the username in UPS "Manage User Profile" and I can logon with the username I just can't create the My Content after clicking My Site. The funny
thing is if I click My Profile the My Profile page appears (although it is a one-way trust relationship if I use "Check Names" when I try to "Add User" to a group an error message appears stating "No match found. etc). So the
question is how come the account that created the intranet can create
My Site and create My Profile and My Content but if a regular user account logs on and clicks My Site, My Profile and get a page but clicking My Content produces that error that says: "There has been an error creating the personal site. Contact
your site administrator for more information". (Note: The output from Event Viewer is posted below)?
    Thank you
    Shabeaut
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Portal Server
Date:          7/24/2014 4:51:42 PM
Event ID:      5187
Task Category: Administration
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      <ServerName>.<FullQualifiedDomainName>
Description:
My Site creation failure for user '<DomainName>\<UserName>' for site url 'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure
was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Portal Server" Guid="{8b3ddd3d-2b09-4669-bf81-e2d6921feeea}" />
    <EventID>5187</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-24T20:51:42.494Z" />
    <EventRecordID>33776</EventRecordID>
    <Correlation ActivityID="{BC4FAAA6-FA5B-4309-8C2E-0639F5BAC567}" />
    <Execution ProcessID="9600" ThreadID="9520" />
    <Channel>Application</Channel>
    <Computer><ServerName>.<FullQualifiedDomainName></Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
    <Data Name="string0"><DomainName>\<UserName></Data>
    <Data Name="string1">'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'</Data>
    <Data Name="string2">Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid)</Data>
</EventData>
</Event>

Make sure you enable self service site creation on the MySite web application via CA
http://technet.microsoft.com/en-us/library/cc261685(v=office.14).aspx
You mentioned trusts and people picker. I am having a bit of trouble understanding the exact issue here, but is the issue also coming up that the user in question cannot be found with people picker?
searchadforest setting to make sure SP can reach to trusted domains to find users.
"When a Web application uses Windows authentication, People Picker searches all two-way trusted forests and all two-way trusted domains. However, if you want to search from a one-way trusted forest or a one-way trusted domain, you must run the
setapppassword operation, and then run the peoplepicker-searchadforests
property."
http://technet.microsoft.com/en-us/library/cc262051(v=office.12).aspx
http://technet.microsoft.com/en-us/library/cc263460(v=office.12).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Error: No instance of object type PurchaseOrder has been created.

Hi:
I am using BAPI_PO_CREATE1 to create PO's using webdynpro. I get the following error message when I attempt to create a PO.
No instance of object type PurchaseOrder has been created. External reference:
Please help.
Thanks
Sriram

Ramki:
Yes, I did. The initialization code is as follows
Bapi_Po_Create1_Input input = new Bapi_Po_Create1_Input();
input.setPoheader(new Bapimepoheader());
input.setPoheaderx(new Bapimepoheaderx());
input.addPoitem(new Bapimepoitem());
input.addPoitemx(new Bapimepoitemx());
input.addPoaccount(new Bapimepoaccount());
input.addPoaccountx(new Bapimepoaccountx());
input.addPoschedule(new Bapimeposchedule());
input.addPoschedulex(new Bapimeposchedulx());
input.addPotextheader(new Bapimepotextheader());
Thanks
Sriram

Error workflow has been created successfully, but failed to publish and will not be listed in the Project Center

hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.

hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh.

Error: A previous document of this type has been created with later date

hi
when i am adding invoice with a particular date.
and if i am adding another invoice for same customer with date previous to the first one i am getting this error
pls tell the error were i have made and how to slove the error

Om,
Pleae check the following ...
Marketing document with earlier posting date not added
Symptom
Error message: 'A previous document of this type has been created with a later date.' and the document is not added.
Other terms
AR, AP, invoice, credit memo, reserve invoice, wizard, document, generation, past, previous, posting date, settings, initialisation, SAP Business One
Reason and Prerequisites
Business requirement that marketing documents with an earlier date than the current system date are entered.
Solution
Under Administration -> System Initialisation -> Document Settings -> Tab 'General' is a tickbox 'Block Documents with Earlier Date'.
If this box is ticked, the error message 'A previous document of this type has been created with a later date.' is received and the document cannot be added. This affects the following documents:
AR and AP Invoice
AR and AP Credit Memo
AR and AP Reserve Invoice
If the box is unticked, the system displays the message: 'A previous document of this type has been created with a later date. CONTINUE or CANCEL.' If 'Continue' is chosen, the document can be added.
This setting will also affect documents to be processed by the 'Automatic Summary Wizard'.
HTH,
Eddy

F110 Payment run stopped, status Payment run has been carried out.

Hi experts,
I have searched in this forum but didn't find suitable scenario.
I have run automatic payment after the proposal created.
Somehow the payment run status stopped at "Payment run has been carried out".
Then I check the payment run log:
Job started
Step 001 started (program SAPF110S, variant &0000000007737, user name xxxxxx)
Log for payment run for payment on xx.xx.2009, identification XXxxx
System error occurred during blocking attempt; payment run stopped
... the execution of the payment program is terminated
End of log
Job finished
I thought no accounting document has been posted.
Is it the right way if I re-run the program SAPF110S with its variant?
What is the possible impact.
Kindly advise.
regards,
rob

Hi,
Yes there might be no accounting document has been posted because even though the payment run has been carried out but parameters you have mentioned might not been selected because of many reasons.
Please go to EDIT - Payment -
Payment list and exception list.......
Please check if any entry is there in payment list if it is than some doc has been posted.
Rest will go to EXCEPTION list.... will show you the exact errors.
Please check the same in the proposal run first... it seems that PROPOSAL run in not only correct.
See the error and correct it.

Proposal has been sheduled, job was not released

Dear Fi Experts,
In F110- Automatic payment process, while creating proposal the system throwing error
Proposal has been shedulded 03.03.11 10:06:27
Job was not released
Parameters maintained in the prosal is correct, payment method, vendor balance and additional log
while saving the prosal system throwing the error. Same i tried in the quality server its working fine.
Can you explain why it happens?
Thanks and Regards
J.Francis

Hi J. Francis,
It can be some authorization issue, I recommend you to check this with your basis team.
Also check these authorization objects:
S_CTS_ADMI
S_BTCH_ADM
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

I cannot sign into App Store. "unknown error" and then "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"

I cannot sign in to the App Store.
I changed countries a few months ago and updated all my account info and everything was working fine, until recently, while trying to upgrade my softwear to Mavericks, which I cannot do. My apple Username and password work fine on iTunes and on my iPhone. I can also access all my account info when I sign in through the website. It just will not work for the App Store on my Mac Pro.
When I click "Welcome" under Quick Links it asks me to sign in. I sign in with my Apple Username and Password and then it DOES NOTHING
When I click on "Free Upgrade" and then "Install" on the mavericks software, it asks me to sign in again. This time it says "unknown error" and then it says "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"
I''m completely blocked. I cannot procede without being able to update my software.
Please help me.
Rhea

You could try this.
Back up all data.Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Credit for this solution to ASC member luis.pinhor.

Payment proposal has been created - error

Similar Messages

Maybe you are looking for