Payment Proposals (F110) did not created in Batch job

Hello,
We had 1 time issue today. I am just trying to find out if anyone come across this issue.
We have the daily  automated batch jobs which kickks of Payment proposals. Somehow system did not create any proposals and showd as  Zero incoming Payments for customers.  Busiiness users had some doubt as this is not possible and created the manual proposals in 15 minutes and a big payment proposals were created. I am trying to find the cause of this issue. Please let me know if anyone come across this issue.
I did all analysis on business point of view and all invoices were created few days back.
Thanks
ID

Hi,
Thanks for your response. The batch jobs are correctly maintained and as I mentioned this happened 1 time and the same batch runs every day and the issue did not occur
Thanks
Ivan

Similar Messages

  • Payment Program F110 is not creating spool

    Hello experts,
    We are very close to the go-live and facing a major issue with Automatic Payment Program F110. We asked the dev to design Z check form for F110. Our form works well with manual Run ( F-58), we can see spool as well as print but when we Run the F110 the same form does not create any spool nor print anything. Even though its create the check, done the posting but no spool no print. The error we are getting it is  'No printer fonts maintained for Message no. TD327' . IT people sets all the fonts but no luck.
    appritiate the comments.
    Thanks

    Hi,
    take a look on this sap note.
    i hope it help you.
    Regds
    Note 391852 - Message TD327 (No printer fonts maintained for &)
    Summary
    Symptom
    The system displays error message TD327 (No printer fonts maintained for &) during the print although the device type of the printer has a base device type with printer fonts.
    Additional key words
    IW31, IW32, IW3D, IW21, IW22, IW23
    Cause and prerequisites
    The device type has not separate printer fonts but inherits them from the base device type.
    Solution
    Implement the program correction as specified in the

  • Two Deliveries did not go through Batch Job Runing

    Hi,
    In this company every evening the automatic batch Job for Billing due list is run but on Nov 23 one Deliver and on Nov 30 another delivery has not gone through i.e. the invoices were not created for these two deliveries.
    I checked in VF01, the individual invoice is being created. The user is asking the reason for this and how to prevent this type of situation in future.
    I don't know the Batch Job number and I think it has been done in VF06.
    Please guide me how I can solve this issue.
    Thanks,
    Jans

    Hello Tushar,
    Thank you for your reply. I don't know the Variant name also and I don't know the Batch Job number eirther. The user is not aware of these things. I tried to find out from VF06 but I could not figure out anything.
    Please explain me your sentece "Execute billing program in foreground and check". you mean to say after creating the same scenario in the quality, I will run the Billing program ( I will take the Billing program from the VF01). If I am correct please let me know.
    Regarding debugging,  if I have to do how I can do it. I know to go to Debuggiing mode if I put in the command field  "/h" , I will be in the debugging mode. But my question is which transaction Should I use VL02N or VF01 to find out the Problem
    I have mentioned earlier that I went to VF01 and these deliveries are fine to create invoices but the User is interested to know the Problem and to find out the cause so that they can prevent it occuring in future.
    Thanks,
    Jans

  • Due to my account being hacked, I changed my Apple ID, I did not create a new account.  Now my software updates want the old ID but will not accept the password.  How can I update built in software.

    My orginal Apple ID was hacked, so I changed my Apple ID.  I did not create a new ID.  I have changed my ID on my profile on my MacBook Pro.  However now I have an update for factory installed software iPhoto and iMovie that is asking for the old ID.  How can I get the updates or force them to use the new ID that I am using for every other Apple product I own.

    You'll have to talk to Apple about AppleID and account issues, we are just other users here.

  • Error in Running a dimension ( BIB-9509 Oracle OLAP did not create cursor.)

    oracle.dss.dataSource.common.QueryRuntimeException: BIB-9509 Oracle OLAP did not create cursor.
    oracle.express.ExpressServerExceptionError class: OLAPI
    Server error descriptions:
    DPR: Unable to create server cursor, Generic at TxsOqDefinitionManagerSince9202::crtCurMgrs4
    OES: ORA-00938: not enough arguments for function
    , Generic at TxsRdbRandomAccessQuery::TxsRdbRandomAccessQuery
    help is appreciated
    Thanks, Prasad

    This is the patch: 2529822
    "Best Practices for Tabular Cube Aggregation & Query Operations". Thanks very much for your advice.
    I followed the instructions in the document, but it did not seem to make a difference when
    trying to follow the tutorial instructions and using the SALES measure.
    However, I selected the stock price measures and it worked ok.
    Is there a size limit here? I am looking at Oracle OLAP and BIBeans to replace our Cognos installation,
    which is expensive and unreliable on unix. Of course our managers and customers want every dimension
    across a huge fact table to be available for end users...

  • Payment Wizard Run does not create Payment/Check

    Does anyone know possible reason/s, why payment wizard run will not create payments and checks?
    The wizard goes up to Execute Step, after execution, it shows:
              0 Payments Created
              0 Checks Created
    I have compared settings (Banking, BP, Payment methods) with Demo Company (Where wizard runs to create Payments and Checks)
    The client is on SAP B1 2007A
    Thanks in advance for help

    I've found several reasons for the Wizard not creating checks.  I don't know if any of these are relevant to you, but take a look.
    1. The vendors do not have default pay-to addresses.  They may have pay-to addresses, but if there is not one that is designated as the default for each vendor, the wizard will not select any checks for them.
    2. The vendors have a default house bank that is different than the bank you are using for the checks.  It is OK if the house bank for a vendor is blank, but it cannot be different from the bank you are using.
    3. If the vendor reference number on any AP invoice is more than 34 characters long, the wizard will not select any invoices from that vendor for payment (yes, the reference number field is 100 characters, but SAP support confirmed this limitation).  Since you are not getting selections for any vendors, this is probably not the issue in your case - but keep it in mind.
    I hope this is helpful.
    Marcia

  • Oracle OLAP did not create cursor.

    hi,
    I recieve the following error :
    javax.servlet.jsp.JspException: BIB-10310 An unknown exception occurred.
    BIB-10101 Handler failed to handle UserObject.
    BIB-14067 Persistable object threw exception during lookup on method setXMLAsString; component class oracle.dss.dataSource.client.QueryClient; exception oracle.dss.util.persistence.BIPersistenceException.
    BIB-9509 Oracle OLAP did not create cursor.
    oracle.olapi.data.source.UnmatchedInputsException
    BIB-9509 Oracle OLAP did not create cursor.
    oracle.olapi.data.source.UnmatchedInputsException
    oracle.olapi.data.source.UnmatchedInputsException
         at oracle.dss.addins.jspTags.PresentationTag.doStartTag(PresentationTag.java:194)
         at untitled2.jspService(untitled2.jsp:6)
         [SRC:/untitled2.jsp]
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
         at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:569)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:304)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    I check my olap with bi_checkconfig.bat and the result is as following :
    <?xml version="1.0" encoding="UTF-8" ?>
    - <BICheckConfig version="1.0.2.0">
    <Check key="JDEV_ORACLE_HOME" value="d:\jdev904" />
    <Check key="JAVA_HOME" value="C:\j2sdk1.4.2_01" />
    <Check key="JDeveloper version" value="9.0.4.0.1419" />
    <Check key="BI Beans release description" value="BI Beans 9.0.4 Production Release" />
    <Check key="BI Beans component number" value="9.0.4.23.0" />
    <Check key="BI Beans internal version" value="2.7.5.32" />
    <Check key="host" value="200.20.20.11" />
    <Check key="port" value="1521" />
    <Check key="sid" value="ora10g" />
    <Check key="user" value="dw_targetschema" />
    <Check key="Connecting to the database" value="Successful" />
    <Check key="JDBC driver version" value="9.2.0.4.0" />
    <Check key="JDBC JAR file location" value="D:\jdev904\jdev\lib\patches" />
    <Check key="Database version" value="10.1.0.2.0" />
    <Check key="OLAP Catalog version" value="10.1.0.2.0" />
    <Check key="OLAP AW Engine version" value="10.1.0.2.0" />
    <Check key="OLAP API Server version" value="10.1.0.2.0" />
    <Check key="BI Beans Catalog version" value="N/A; not installed in dw_targetschema" />
    <Check key="OLAP API JAR file version" value="9.2" />
    <Check key="OLAP API JAR file location" value="d:\jdev904\jdev\lib\ext" />
    <Check key="OLAP API Metadata Load" value="Successful" />
    <Check key="Number of metadata folders" value="2" />
    <Check key="Number of metadata measures" value="1" />
    <Check key="Number of metadata dimensions" value="3" />
    - <Check key="OLAP API Metadata">
    - <![CDATA[
    ==============================================================================
    Type      Name (S=Schema, C=Cube, M=Measure, D=Dimension)          
    ========= ====================================================================
    Folder... ROOT
    Folder...   KAFA_COLLECTION
    Folder...   KAFA_COLLECTION2
    Measure..      SALARY                                            
    Dimension      DEP_DIM                                           
    Dimension      EMP_DIM                                           
    Dimension      JOB_DIM                                           
      ]]>
    </Check>
    </BICheckConfig>
    what is the problem ??????????

    I am getting following error from my application after we applied 9206 patch on database.
    ================================================
    oracle.express.idl.util.OlapiException: No more data to read from socket
         at oracle.express.idl.ExpressOlapiDataSourceModule.DefinitionManagerInterfaceStub.crtCurMgrs2(DefinitionManagerInterfaceStub.java:927)
         at oracle.express.olapi.data.full.DefinitionManagerSince9202.createOLAPICursorManagers(DefinitionManagerSince9202.java:611)
         at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManagers(ExpressDataProvider.java:1325)
         at oracle.express.olapi.data.full.ExpressDataProvider.internalCreateCursorManager(ExpressDataProvider.java:680)
         at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManager(ExpressDataProvider.java:586)
         at oracle.olapi.data.source.DataProvider.createCursorManager(DataProvider.java:268)
         at oracle.dss.dataSource.QueryUtilities.setUpCursors(QueryUtilities.java:559)
         at oracle.dss.dataSource.QueryServer._setUpCursorsForMainQuery(QueryServer.java:7039)
         at oracle.dss.dataSource.QueryServer._getCursorForCube(QueryServer.java:4098)
         at oracle.dss.dataSource.QueryServer._updateCube(QueryServer.java:4055)
         at oracle.dss.dataSource.QueryServer._applySelections(QueryServer.java:2661)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at oracle.dss.util.Operation.execute(Operation.java:69)
         at oracle.dss.dataSource.OperationQueue.update(OperationQueue.java:68)
         at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
         at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
         at oracle.dss.dataSource.QueryServer.queueOperation(QueryServer.java:7076)
         at oracle.dss.dataSource.QueryServer.applySelection(QueryServer.java:2192)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at oracle.dss.util.Operation.execute(Operation.java:69)
         at oracle.dss.dataSource.QueryManagerServer.sendQueue(QueryManagerServer.java:1549)
         at oracle.dss.dataSource.common.OperationQueue.update(OperationQueue.java:198)
         at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
         at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
         at oracle.dss.dataSource.common.OperationQueue.addOperation(OperationQueue.java:127)
         at oracle.dss.dataSource.client.QueryClient.applySelection(QueryClient.java:970)
         at oracle.dss.dataSource.common.QueryQueryAccess$SelCursor.getDataAccess(QueryQueryAccess.java:1133)
         at oracle.dss.dataSource.common.QueryQueryAccess.getDataAccess(QueryQueryAccess.java:278)
         at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:639)
         at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:705)
         at oracle.dss.datautil.QueryAccessUtilities.getValues(QueryAccessUtilities.java:608)
         at oracle.dss.queryBuilder.QueryBuilderUtils.getSelectedMeasures(QueryBuilderUtils.java:623)
         at oracle.dss.queryBuilder.SelectedItemsPanel.populateTree(SelectedItemsPanel.java:298)
         at oracle.dss.queryBuilder.SelectedItemsPanel.refreshTree(SelectedItemsPanel.java:333)
         at oracle.dss.queryBuilder.SelectedItemsPanel.setActive(SelectedItemsPanel.java:366)
         at oracle.dss.queryBuilder.ItemsPanel.setActive(ItemsPanel.java:251)
         at oracle.dss.datautil.gui.DefaultBuilderDialog.setActive(DefaultBuilderDialog.java:1072)
         at oracle.dss.datautil.gui.DefaultBuilderDialog.validateNextPreviousEvent(DefaultBuilderDialog.java:1396)
         at oracle.dss.datautil.gui.DefaultBuilderDialog$BuilderWizardValidateAdapter.wizardValidatePage(DefaultBuilderDialog.java:2113)
         at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
         at oracle.bali.ewt.wizard.WizardPage.validatePage(Unknown Source)
         at oracle.dss.datautil.gui.CustomImageWizardPage.validatePage(CustomImageWizardPage.java:81)
         at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
         at oracle.bali.ewt.wizard.BaseWizard.doNext(Unknown Source)
         at oracle.dss.datautil.gui.CustomWizard.doNext(CustomWizard.java:415)
         at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.Dialog$1.run(Unknown Source)
         at java.awt.Dialog.show(Unknown Source)
         at java.awt.Component.show(Unknown Source)
         at java.awt.Component.setVisible(Unknown Source)
         at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
         at oracle.dss.datautil.gui.DefaultBuilderDialog.runDialog(DefaultBuilderDialog.java:489)
         at oracle.dss.datautil.gui.DefaultBuilderDialog.run(DefaultBuilderDialog.java:466)
         at oracle.dss.queryBuilder.QueryBuilder.run(QueryBuilder.java:2401)
         at gecf.pmg.PmgBiOlapApp.newCrosstabWiz(PmgBiOlapApp.java:1622)
         at gecf.pmg.PmgBiOlapApp.mNewCrosstab_ActionPerformed(PmgBiOlapApp.java:1563)
         at gecf.pmg.PmgBiOlapApp$5.actionPerformed(PmgBiOlapApp.java:697)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)

  • Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

    Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

    Hi Ivanlaiwh,
    I have been doing the modification regarding your account.
    You should now be able to proceed to a new purchase.
    Thanks.
    Arnaud.

  • BIB-9505 Oracle OLAP did not create cursor

    Hi, I am in New Presentation Wizard trying to create a new Cross tab and receive these error messages:
    oracle.dss.dataSource.common.QueryRuntimeException: BIB-9509 Oracle OLAP did not create cursor.
    oracle.express.ExpressServerExceptionError class: OLAPI
    Server error descriptions:
    INI: Error creating a definition manager, Generic at TxsOqConnection::createDefinitionManager
    SEL: Unable to generate an execution plan for the query, Generic at TxsOqExecutionPlanGenerator::generate(TxsOqSourceSnapshot*)
    SEL: Not Yet Implemented, Generic at TxsOqSQLPersistentExecutionPlanGenerator::generate
    oracle.dss.dataSource.common.OLAPException: BIB-9509 Oracle OLAP did not create cursor.
    oracle.express.ExpressServerExceptionError class: OLAPI
    Server error descriptions:
    INI: Error creating a definition manager, Generic at TxsOqConnection::createDefinitionManager
    SEL: Unable to generate an execution plan for the query, Generic at TxsOqExecutionPlanGenerator::generate(TxsOqSourceSnapshot*)
    SEL: Not Yet Implemented, Generic at TxsOqSQLPersistentExecutionPlanGenerator::generate
    oracle.express.ExpressServerExceptionError class: OLAPI
    Server error descriptions:
    INI: Error creating a definition manager, Generic at TxsOqConnection::crea[i]Long postings are being truncated to ~1 kB at this time.

    Actually I am following the example downloaded from www.iafsoft.com (http://www.iafsoft.com/downloads/index.htm presentation number 32106). The example involves only a one dimensional and one measure simple cube which resides in Analytic Workspace. It was demonstrated in one of the Oracle OpenWorld sessions in SF back in November 02. So I trust that it will work.
    The environment I have is
    Oracle 9.2.0.2.1 (Enterprise Edition)
    JDeveloper 9.0.3
    Windows 2000 (SP2)
    256M memory
    (all these run on the same laptop)
    In this environment JDeveloper can connect to the database, can access the catalog owned by BIBCAT, can display cubes owned by BIBDEMO, can query data residing in AW through OLAP_TABLE, and can also see the dimension and measure that reside in AW from the presentation wizard. So all this convinces me that installation is ok.
    Here's how the error occurs: In the presentation wizard, I select the measure from the left window and move to the right window. I then click the "Next" button to display the layout editor. Then when I click the "Next" button, the wizard won't go to the next step. If I click the "Finish" button instead, the error message will show up.
    I am really stumped (for the last several days already) as to w[i]Long postings are being truncated to ~1 kB at this time.

  • BIB-9509 Oracle OLAP did not create cursor.

    I am getting following error. How can this be resolved?
    BIB-9509 Oracle OLAP did not create cursor.
    oracle.express.ExpressServerExceptionError class: OLAPI
    Server error descriptions:
    DPR: Unable to create server cursor, Generic at TxsOqDefinitionManagerSince9202::crtCurMgrs4
    OES: ORA-34612: Your program or expression uses too much execution space. Eliminate recursion or reduce the levels of nesting.
    , Generic at TxsRdbSQLQuery::absolute()

    Hello.
    I have the same problem when trying to view Cube's data an d i'm new with OLAP.
    PR: Unable to create server cursor, Generic la TxsOqDefinitionManagerSince9202::crtCurMgrs4
    OES: ORA-00902: invalid datatype
    , Generic la TxsRdbRandomAccessQuery::TxsRdbRandomAccessQuery.
    Did you find e solution?
    Thanks.

  • Editing a document i did not create

    I am currently using Adobe Acrobat 7.0 Standard on a document
    that i did not create. I have been able to delete text and add text
    but it appears as comments.
    My question is - Is there a way I can accept the changes so
    that the changes dont show as comments but show as normal text. eg.
    If i Delete a word "Text", then there is a stike through on it.
    Then if I type in "test", this appears a comment. Is there a way
    where I can delete "text" and type in "test" so that it appears
    jusy like normal text rather than comments in Adobe Acrobat
    Standard 7.
    I have tried using the advance editing touchup text tool, but
    it throws off my margins, and i can't figure out how re-align the
    margins.
    can't i just "accept" the changes, and have them added in,
    like in Word?

    Thank you for your post. These forums are specific to the
    Acrobat.com website and its set of hosted services, and do not
    cover the Acrobat family of desktop products. Please visit the
    following forums for any questions related to the Acrobat family of
    desktop products:
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

  • Depreciation Run not creating a batch in SM35

    Hi All,
    System is not creating a batch in SM35 for month end Depreciation Run.
    I am using the transaction AFAB with test run system is showing the
    line items of depreciation run but without test run system is not
    creating batch in SM35 to complete the process of depreciation run.
    Please advice what to do to solve this problem. its very (URGENT)
    Regards,
    Yasir Khan

    Hi,
    Have you created a BDC or perhaps you have used Direct postings in FI?
    Look in your asset if it is posted in the period and if it is posted in FI.
    You can recreate a BDC with AFBD - Recreate Session.
    Have look in your Job log and spool file perhaps there is more information
    Paul

  • Facing Error - BIB-9509 Oracle did not create cursor

    Hi All ,
    While Creating Crosstab/Graph I am facing one error " Unable to apply all the settings to the Presentation".
    BIB-9509 Oracle did not create cursor
    OracleExpress server ExceptionError.
    Require help..
    Regards,
    ViSHAL.

    Hi All ,
    While Creating Crosstab/Graph I am facing one error " Unable to apply all the settings to the Presentation".
    BIB-9509 Oracle did not create cursor
    OracleExpress server ExceptionError.
    Require help..
    Regards,
    ViSHAL.

  • Iphone locked itself? I did not create any password!!

    When I was in China Iphone locked keypad itself? I did not create any password before!!

    You should have set up a password. It is important to have one in order to prevent other users from installing applications and to make your Mac safer.
    If you have set up your Apple ID, you can try resetting your user password with your Apple ID > http://support.apple.com/kb/HT1274
    If it does not work, reset your user password through Recovery > http://discussions.apple.com/docs/DOC-4101 Then, set up a different Keychain password > http://support.apple.com/kb/ht1631

  • Bookmark I did not create

    I discovered a bookmark that I did NOT create in one of my folders.
    It does not show up in the library.
    It shows in the Bookmarks dropdown.
    I can not delete it and the properties form is all blank.

    The clock will actually update itself constantly whenever it changes from a cell tower to a different one, or from a cell coverage area to another cell coverage area.
    AT&T regulates the time on it's cell towers. As such, when you change towers, it'll update the clock. Almost every GSM carrier does this (at one point, TMobile, did not), and as such almost every GSM phone will auto update it's time as you jump time zones, adjust for daylight savings etc.
    Anytime the phone updates its signal from a cell tower, you will notice the clock changes. If you're near speakers, and here the standard GSM interference, and your phone isn't ringing, or you're not receiving email/texts etc. It's likely that your phone is locating itself with the cell towers, and your clock will update to be at the exact time.
    You can turn this feature off by going into settings, general, date & time, and turn set automatically off.
    You'll notice then, that if you change time zones, or daylight savings goes into effect. Your clock will not update.
    Message was edited by: cderalow
    spelling

Maybe you are looking for

  • HOW TO PASS VALUE TO STORED PROCEDURE through page

    Hi I want to create generate next number on base of type. I have created stored procedure with passing  three value input. If I am passing value manually through page then next number is generating. But I don't to pass value manually, I have to assig

  • Blue screen (Yes Apples posted fixes don't work for me)

    I am tired tired... I can't get rid of the blue screen delay at startup in 10.5.2 or 10.5.3. I've tried the fixes. No go... I even tried wiping a drive and doing a Clean Leopard install. After adding the .5.3 update the long delay returns. My delay i

  • Adobe Air on WinPE (2.1)

    Has anyone ported Adobe Air to work under the WinPE (2.1) environment (using Microsofts AIK)? It seems like it should be possible since, WinPE is simply a stripped down version of Windows. I've tried copying the Air framework files and associated reg

  • RAW Images In Elements 8

    How do i open RAW files to edit in Photoshop Elements 8?

  • Help for javac task in ant?

    Here I have 5+ folders, ervery has many java source files. And all the java source files in these folders is the same package name, also there may have same file name in different folder. And now I want the javac to compile these files and save the c