Payment release through work flow

Hi Friends,
I am new for work flow.
I have activated payment release work flow (WS 00400021) and same has assigned to user.
But when i am making payment through F-53, system is posting the transaction and getting posted.
I dont how to excute the transaction through work flow. But where as i have completd the configuratuion part according to configuration document.
Please help me the above scenario.
Thanks&regards,
Bramha

Hi Suresh Addagiri,
Thanks for u r valuable answer.
Kindky tell me how will ristrict F-53 authorization.
Kindly reply.
Regards,
Bramha

Similar Messages

  • RELEASE PROCEDURE THROUGH WORK FLOW

    Dear Sirs,
            How to configure Release procedure through work flow for the purchasing documents? Which are the modules integrated for this configuration? Kindly
    give me the procedure in detail.
    Regards
    Yoga

    Hi Anand,
        Thanks for your response. In my question I had not mentioned about the criteria.
    The criteria for release of P.O. is on the basis of net value of the P.O. and there are
    two levels of approval as follows.
    If the Value of P.O. is less than Rs.50,000/=,  approval of level1 is required.
    If the Value of P.O. is greater than or equal to Rs.50,000/=, approval of both level1 and level2 is required.
        1.If the value of P.O. is Rs.30,000/=, then it should appear in the mailbox of level1 only. It should not appear in the mailbox of level2.
        2.If the value of P.O. is Rs.60,000/=, first it should appear in the mailbox of
    level1 and after the approval of level1, it should appear in the mailbox of level2
    for next level of approval.
        Is there any detailed documentation available to cofigure the above scenario.
    Regards
    Yoga

  • CC field in mail sending through work-flow

    Hi All,
    I have one issue.
    I want to send mail through work-flow using sendmail activity.
    I can able to send mail also...but for the same mail i want to keep one more person as CC or BCC..
    Is there any feature available in work-flow to keep a person in CC or any other solution..
    I know this is possible using FM....something other than this...please..
    Regards
    Ansumesh

    0000 infotype(actions) run with any reason like separation or long term disabilitymeans
    in Actions infotype the both are reasons right are your sure whether these are Actions reasons or action type ?
    In that case identify the Code Related to MASSN which is is acton type feild name and action reason is MASSG
    and deactivate for those two action type that will suffice the requirement right

  • How to do release strategy work flow in MM

    how to do release strategy work flow in MM. for purchase order release how to do release strategy work flow. please give elaberate steps

    1: Install SAP - your IT support team should be able to help you with this
    2: Start the SAP Logon Pad (it is in the Start menu if you use Windows - look around)
    3: Go to transaction SPRO
    4: Navigate the structure, go to materials management, purchasing and then look around
    5: Read the documentation for each activity
    6: Perform the activities
    Seriously, you will be amazed by how much you can learn by actually making an effort.
    PS: I see you <b>expect</b> 10 points for your one-line replies, so this one should be worth at least 50.

  • Where to assign User Id to agent id in PO release strategy work flow

    Hi Guys
    I have on requirement
    Where to assign User Id to agent id in PO release strategy work flow
    Thanks in advance
    SAP MM

    Hi,
    Check & follow the path:
    SPRO-- > MM ---> Purchasing -> Purchase Order- > Release Procedure for Purchase Orders -
    > Define Release Procedure for Purchase Orders -
    > Workflow
    Here against each release code assign  respective User ID's for Release Code
    Regards,
    Biju K

  • PR Release Strategy work flow

    Hi Guys ,
    I have a work flow requirement , In Which i have to know in Purchase requisition items history . how to identify the new item and
    change items for triggering the work flow .
    Here i am using a badi to triger an event . ( BADI :  ME_REQ_POSTED )  
    Any idea , Plz share .
    THanks
    Nags

    Hi,
    First you set your all required configuration fro release strategy(Class,Char,Rel.Group,Release Strategy ,Release Indicator )
    For Work flow settings,You have to do follwoing configuration:
    MM - purchasing - purchase order - release procedure - Define Release Procedure for Purchase Orders - Work flow - Enter release code, group, user ID, object type as user.
    Creation of work flow object,activation of workflow and other related settings will be done by Techinical  work flow consulant.
    Thanks,
    AMIT

  • Needs to stop mail going through work-flow related to Leave of Absence & se

    While running transactions Pa20/pa30..if it runs for Leave of absence with 5 as reason & separation with 5 as reason then the mail is going to employess due to work-floas it goes to all other actions & reasons.But we want to stop it for above mentioned only.How can we change logic in work-flow for this

    0000 infotype(actions) run with any reason like separation or long term disabilitymeans
    in Actions infotype the both are reasons right are your sure whether these are Actions reasons or action type ?
    In that case identify the Code Related to MASSN which is is acton type feild name and action reason is MASSG
    and deactivate for those two action type that will suffice the requirement right

  • Down payment release Work flow

    Hi Experts,
    Is there any such scenario to release the down payment requests through Work flow in SAP ? If yes ,kindly provide the customization settings ? Transaction :- F-47
    Rgds
    ManiSuma

    Hi Jose,
    I have gone through the same ,but my problem hasn't solve.Kinldy explain how to proceed further.
    Rgds
    ManiSuma

  • SAP Work flow for PO release.

    hi sap Gurus,
    i working on PO release with work flow concept,
    can any one help in this.
    i have done up to release procedure.
    i want config. the work flow.
    can any one give step by step how to do.
    help full answers will be rewarded.
    regards
    kalyan

    hi
    kalyan i have forwarded attachment of po work flow
    to [email protected]
    just check,
    thanks.
    anand

  • Event linakge for PO work flow not transporting to Qualty system

    This is Sudhakar ,
    I have a problem in Event linkage for PO Release strategy work flow.
    I have created a work flow for PO release strategy and done the event linkage through SWETYPV transaction code.
    I have added a new entry in SWETYPV transaction code and tick the 'Linkage Activated' check box. I have done this in development server. When I saved it prompted for a request and I have saved this Under the request( Customize request).
    When I create the purchase Order  for the first time the work flow is getting triggered. When I run the second time its not triggering.
    If I observe the reason is 'Linkage Activated' check box  is getting unchecked  when I create the PO. If I check it again it is asking for a request again.But after next run the linkage is again deactivated.
    Can you please help why this is happening.
    I have created another request in Customize client and transported first the development client, next the customise client request. When I observe in quality system an entry is created in SWETYPV transaction code for my work flow but 'Linkage Activated' check box is not checked.
    How to transport 'Linkage Activated' check box  to quality.
    This is an urgent one. Any body please help me
    Thanks
    Sudhakar

    Hi Imthiaz,
    What you said is correct. Its throwing one error in event trace
    Feedback after error - The message is.
    The mandatory input parameters of the workflow must be set.
    I think I am missing some input parameters.
    One more queation, I had transported this already to Quality
    But the linkage activation flag is not moved.  What could be the reason.
    Thanks
    Sudhakar

  • Work flow for Purchase requisition

    HI EXPERTS,
       I am new for MM workflow, my client asked me to overall purchase requisition approval through work flow,i did configuration like
        BUS 2105 -OBJ TYPE
        WS20000077-RECIVER TYPE
        RELEASESTEPCREATED-EVENT TYPE
        AND ASSIGN AGENT ALSO.....
       its working fine,and i get messages but my problem is  i didnt release pr from inbox,
       again i used me 54n for release .is there any chance to release pr from in box,,,
       and also how to change time in time stamp column,i am getting wrong time please help me...
       Thanks in advance
    Thanks,
    siva

    You need to verify that there is a teminating event. A terminating event works so that if you perform the action outside of the workflow inbox, the linked work item is "logically deleted" from the user inbox.

  • Work Flow for Purchase Order

    Dear All,
    How to create Business Work Flow for Purchase Order Creation and it’s release process.
    I want to create purchase order and forward for release process. I want to done all this process through Work Flow.
    So can anybody guide me step-by-step guidance for Purchase order creates & release process through “SWDD”?
    Regards,
    Mahesh Wagh

    Hi Mahesh,
    See this link. It might help you.
    [https://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE%20PROCEDURE#RELEASEPROCEDURE-RELEASEPROCEDURE]
    Thanks&Regards,
    Manjula.S

  • Leave request in Work flow

    Dear All
    Could you please throw a light on this  Leave approval through Work flow    . leave request should goes to concern supervisor how we can configure  in the SAP  could you please tel me  is it relating to functional or technical
    1 if the concern supervisor is not available can we assign to another alter person to approve ?
    2 if the concern person is not using mails can that leave request goes to supervisor mobile ?
    3 if any person is taken leave with out informing , once he come to the office after leave can we send the leave request of past dates of what he already utilised  ?
    Regards
    Raghavendra

    hi
    TO make use of Leave request worflow , there is a SAP delivered template 12300111 , which can be utilized for leave approval.
    1 if the concern supervisor is not available can we assign to another alter person to approve ?
    there are 2 methods to handle this,  1 is that the concerned supervisor can make a substituion rule in portal , 2 , you will have to implement deadline monitoring in your workflow.
    2 if the concern person is not using mails can that leave request goes to supervisor mobile ?
    the supervisor can logon to portal using mobile , if he has a smartphone device. , ya mobile approvals are possible .
    3 if any person is taken leave with out informing , once he come to the office after leave can we send the leave request of past dates of what he already utilised ?
    ya you can do this scenario , only payroll related things need to be checked in this case.
    Regards
    sameer

  • Work flow for MRP list

    Hi Friends,
    I would like to created work flow to MRP controller. after MRP run, the MRP list should be sent to the MRP controller through work flow, please provide me the required configuration step by step.
    Regards,
    Arun Kumar R V

    Hi,
    Work flow is related to Technical. You need to contact ABAP consultant. He will guide you on this.
    Regards,
    V. Suresh

  • Work flow for park document

    Dear Expert,
    my client requirement is at the time of park the FI & MIRO document the email should sent to the Authorisation person for post the same document, i think it can be managed through work flow , Can anybody know what is the configuration for work flow
    regards
    gk

    closed

Maybe you are looking for

  • I downloaded the newest ff to a friends imac and the os 10.4.11 won't run it. how do i get back to a version that will work on that computer?

    friends computer had firefox on it and it asked to update... wouldn't work so I went to mozilla and downloaded the newest version to find out it won't work with this os. I need to restore the older version to her computer and don't know how.

  • Embedded flash in PDF - Adobe links not working

    Super annoyed here. We have a bunch of PDF's used in public education by teachers all over which have flash embedded (yes some not so smart person created them) Until 3 weeks ago Reader would send the user to the page: Acrobat Help | Flash Player nee

  • Leaving computer in Sleep mode?

    Hi, As quite new to the world of computers, a simple question. Which is the better mode for a computer to be left in for a few days? a) Leave the Mac in Sleep or b) Shut down

  • VHS to DVD in Premiere Pro CC with easy menu building.

    Hi! I am wondering if there is a good workflow that I can implement to quickly capture VHS/8mm tapes using Premiere Pro CC and then author them to disc with a menu. I would like to be able to quickly add menu markers automatically pererably and a fun

  • Printing SMARTFORMS

    Hello Experts, I am developing new SMARTFROM. Requirement: On entering the Personnel number(s) on the selection it should print SMARTFORM. for one entry there are two page. so for 2 entries it should show 4 pages. It should work like mass printing. E