Payment run getting released ERROR
When trying to do the payment run I have executed the following steps:
1. Entered the parameters
2. Proposal run has been done
3. Proposal has been edited
4. After the above steps when I make a payment run , the status tab shows
Parameters have been entered
Proposal has been created
Proposal has been edited
Payment run has been released on 13.09.2009 14:53 Can any one help me with solution as to why is this happening. The invoices also got bloced during one identification run
Its very urget. Solutions appreciated asap.
We have the same F110 batch run with this status:
Payment run has been released 05/19/10 08:18:25
We tried the delete output suggestion but the option is not activated thus we could not proceed with deleting the batch and facilitate reprocessing.
This "released" status came about when the USER is starts to do "payment run" a power shutdown occurred making the batch
"stucked" somewhere. Worse is, no FI-Document was created.
We tried changing the prioritization status of the batch job but it did not help.
SAP experts, your support is highly appreciated.
Similar Messages
-
While making a payment am getting the error.
Hi All,
While making a payment am getting the error.
Error Details:
APP-SQLAP-10000:ORA-20001:APP-FND-00466
FND_CONCURRENT.GET_REQUEST_STATUS cannot find your concurrent request 943570.
This is my payment batch details:
BatchName PaymentDate Status
EMPLOYEE210809 21-08-09 Formatted
I went to following navigation
PayablesManager-->Payments-->PaymentBatches-->i query for the particular invoice batch(am getting corresponding invoice)-->Actions..1-->ConfirmPAymentBatch(i enabled the check box) click on the ok button.
Can you pls suggest me how i can do this one.
Thanks in advance.
Regards,
Leelakrishna.GPl see if MOS Doc 1054330.6 (APXPAWKB - GETTING FRM-40735; ORA-04068; ORA-04067; ORA-06508; ON PAYMENTS) can help
HTH
Srini -
Payment run F110 gives error message
Hi
When i run a normal debit order payment run, i get the messages, GK000,FZ306,FZ311,FZ398 and F0073.
I dont know what may be the cause of this.
Can someone please assist me, please?
Thanks
Regards
KagisoError Message number GK 000 is termination response from system.
This message suggest you to contact SAP.
Please refer SAP Note 673118 - Error message TOT_SEL NR_OF_FIELDS. The note will help for error analysis.
Hope this can assist you.
Thanks & Regards
JP -
Payment run with sepa ct creates only error message
Hello @ all,
in SAP ECC 6.0, we have this error message:
MESSAGE_TYPE_X
Bank details FI / 22301800015162 / 22301800015162 do not have an IBAN
FZ 762
We maintained in FI12 the housebank master records, but still the payment run get no IBAN for the XML-file.
Do someone imagine what went wrong in the settings or in the dmee (uiban)?
Thanks in advance for your help
BlackHello Kedar,
I checked both notes, but they are all implantated. So I am quite handeling the same problem. Do you have some other ideas?
I appreciate your help!
Thanks in advance.
Black -
F110 Automatic Payment Run Is Not Picking Documents.
Hi,
I have a foreign based vendor for whom i have assigned a payment method recently (previously there was no payment method assigned) and also checked the foreign business partners allowed checkbox in the payment method for company codes screen.
However when i create new vendor invoices for the vendor the documents are not selected for payment in the F110 payment run. The error message shown is "No valid payment method". However when i directly assign a payment method to the vendor document manually, the F110 payment run can select this document.
However the way it shd work is that once the payment method is assiged to the vendor master data then any new documents created for the vendor should be selected for payment in the F110 payment screen.
may i know why this is not working like this?
Edited by: Raja Kumar on Jun 24, 2009 9:32 AMHi Raja,
For the Vendor to whom you are posting invoices, if the vendor balance is in debit, then system cant understand for which document it needs to do payment. It might happened that some credit memos are issued for that vendor. That is the reason in APP, its not picking the documents automatically. If the vendor balance is in credit, then it will pick automatically the house bank. Do one thing, make the balance of vendor as credit (H), then if post any invoice it will automatically pick in APP.
Hope u understood, Let me know if u still need any clarification.
Regards
Srikanth -
F110 - Payment Run has been released error
Hi,
When we are executing payment run F110, after parameter entered & payment proposal is created it gives an message payment run has been released without
payment proposal edited & payment run carried out.
pl. help me in this regard.
thank u
regards
santoshhi Chenu,
thanks for reponse immediately, can u kindly tell in detail why it will go to released state and how to overcome this problem, it happen occassionally not regularly.
thank u
regards
santosh -
When click the Payment Action "Format " gets the error
Dear all:
When do the AP payment click the Payment Action "Format " gets the error as follow , how can I solved the problem?
=========================================================================
LOGFILE :
Oracle 應付帳款管理系統: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
C050_CAPPBFOR_HS module: C050 HS HKD Check Payment Format
目前的系統時間是 07-01-2010 12:04:30
+-----------------------------
| 正在啟動並行程式的執行...
+-----------------------------
引數
P_PAYMENT_BATCH='快速付款: 識別碼=1031163'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
TRADITIONAL CHINESE_AMERICA.UTF8
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
MSG-00004: After Get_Base_Curr_Data
MSG-00800: Getting Payment Batch details....
MSG-00900: Payment Batch does not exist.
MSG-00955: Deleting AP_CHECKRUN_CONC_PROCESSES record....
REP-1419: 'beforereport': PL/SQL 程式異常中止.
Report Builder: Release 6.0.8.20.2 - Production on 1 01 7 12:04:29 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
輸入使用者名稱:
Plsql 程式的日誌訊息開始
PlSql 程式日誌訊息的結束
程式 以狀態 1 結束
為並行請求 4280108 執行 Oracle*Report 時, '並行管理程式' 發生錯誤.
有關詳細資訊, 請查閱並行請求日誌檔及/或輸出檔.
正在執行請求完成選項...
已完成請求完成選項的執行.
並行請求已完成
目前的系統時間是 07-01-2010 12:04:30
APPSTAND : 11.5.33
APXINWKB : 11.5.564.11592.22
APXPAWKB : 11.5.319.1159.21
FNDCPVWR : 11.5.15
FNDRSRUN : 11.5.129
FNDSCSGN : 11.5.111
==========================================================
Regards
Edited by: Terry Chen on 2010/1/6 下午 8:20Hi terry;
Please follow below and see its helpful for your issue:
JEDEREFD Errors With Msg-00900: Payment Batch Does Not Exist. [ID 438680.1]
Error When Creating A Quick Payment Through The Invoice Workbench - Pay In Full APXPBFEL [ID 566027.1]
JEPTBFOR Errors With REP-1419, MSG-00901 [ID 433323.1]
APXPBFOR - Format Payments : Program Aborted With Error REP-1419 When Run From NLS Responsibility [ID 257075.1]
Regard
Helios -
Getting an error when running my program but it compiles.
Hey guys, I'm having a problem running the program. Everything compiles correctly, but then I get the error code linked below. Everything I think is correct here. Any ideas? I posted CinReader as well in case you wanted to try compiling and running it yourself.
Thanks
public class TextShuffleLevel
private String jumble;
private String [] matchString;
public TextShuffleLevel ()
jumble = "dunops";
matchString = new String[5];
matchString[0] = new String("abound");
matchString[1] = new String("bound");
matchString[2] = new String("undo");
matchString[3] = new String("band");
matchString[4] = new String("bond");
public TextShuffleLevel (int whichDefaultLevel)
if (whichDefaultLevel == 1)
jumble = "dunops";
matchString = new String[5];
matchString[0] = new String("abound");
matchString[1] = new String("bound");
matchString[2] = new String("undo");
matchString[3] = new String("band");
matchString[4] = new String("bond");
else if (whichDefaultLevel == 2)
jumble = "srcaso";
matchString = new String[11];
matchString[0] = new String("across");
matchString[1] = new String("crass");
matchString[2] = new String("cross");
matchString[3] = new String("scars");
matchString[4] = new String("soars");
matchString[5] = new String("arcs");
matchString[6] = new String("soar");
matchString[7] = new String("scar");
matchString[8] = new String("oars");
matchString[9] = new String("cars");
matchString[10] = new String("orcs");
else
jumble = "eplcis";
matchString = new String[19];
matchString[0] = new String("splice");
matchString[1] = new String("spiel");
matchString[2] = new String("plies");
matchString[3] = new String("slice");
matchString[4] = new String("clips");
matchString[5] = new String("epics");
matchString[6] = new String("spice");
matchString[7] = new String("epic");
matchString[8] = new String("lice");
matchString[9] = new String("slip");
matchString[10] = new String("clip");
matchString[11] = new String("pile");
matchString[12] = new String("lisp");
matchString[13] = new String("pies");
matchString[14] = new String("isle");
matchString[15] = new String("lips");
matchString[16] = new String("lies");
matchString[17] = new String("ices");
matchString[18] = new String("pics");
public TextShuffleLevel (String newJumble, String [] newMatchString)
jumble = newJumble;
matchString = newMatchString;
/* This is the nasty one */
public boolean findMatch (String matchTry)
boolean foundMatch = false;
for (int i=0; i<matchString.length; i++)
if (matchTry.equalsIgnoreCase(matchString))
foundMatch = true;
break;
return foundMatch;
public void setJumble (String newJumble)
jumble = newJumble;
public void setMatchStrings (String [] newMatchString)
matchString = newMatchString;
public String getJumble ()
return jumble;
public int getJumbleLength ()
return jumble.length();
public int getNumberOfMatches ()
return matchString.length;
public String[] getMatchString ()
return matchString;
public class TextShuffleGame
private int playerLevel = 1; // start them on level 1
private CinReader reader;
private TextShuffleLevel l1;
private TextShuffleLevel l2;
private TextShuffleLevel l3;
private TextShuffleLevel onTheFly;
public TextShuffleGame ()
reader = new CinReader();
// Using Statically Set Levels
l1 = new TextShuffleLevel(1);
l2 = new TextShuffleLevel(2);
l3 = new TextShuffleLevel(3);
// this one allows for a 'custom' level
String fly[] = {"tea","at", "ate"};
onTheFly = new TextShuffleLevel("eta", fly);
//Setup for levels
public void go ()
boolean quit = false;
char choice = 'z';
int lastLevel = 0;
while (quit == false)
lastLevel = playerLevel;
if (playerLevel == 1)
play(l1);
else if (playerLevel == 2)
play(l2);
else if (playerLevel == 3)
play(l3);
else
play(onTheFly);
if (lastLevel == playerLevel)
System.out.print("Play the level again");
else
System.out.print("Play next level");
System.out.print("(y/n)? ");
choice = reader.readChar();
if (choice == 'N' || choice == 'n')
quit = true;
//Playing each level the same
public void play (TextShuffleLevel theLevel)
int numGuesses = 0;
int numCorrect = 0;
String userString = "";
System.out.println("What " + theLevel.getJumbleLength() + "-letter words can you get out of " +
theLevel.getJumble() + "?\n");
while (numGuesses < 5 && numCorrect < theLevel.getNumberOfMatches())
System.out.print("Enter a string: ");
userString = reader.readString();
if (theLevel.findMatch(userString) == true)
System.out.println("Great! A match!");
numCorrect = numCorrect + 1;
else
System.out.println("Drat... not a match");
numGuesses = numGuesses + 1;
if (numCorrect == theLevel.getNumberOfMatches())
System.out.println("Terrific! You are ready to try a harder jumble");
playerLevel = playerLevel + 1;
/* FOR TESTING ONLY -- TO BE REMOVED FOR RELEASE */
public static void main (String [] args)
TextShuffleGame tsg = new TextShuffleGame();
tsg.go();
import java.io.*;
import java.util.*;
public class CinReader
private static final int INT_MESSAGE = 0;
private static final int DOUBLE_MESSAGE = 1;
private static final int CHAR_MESSAGE = 2;
private static final int STRING_MESSAGE = 3;
private static final int BOOLEAN_MESSAGE = 4;
private static final String DEFAULT_ERROR_MESSAGE = "Please reenter. ";
private String prompt = "> ";
private String [] errorMessages;
public CinReader ()
prompt = "> ";
setDefaultMessages();
public CinReader (String newPrompt)
prompt = newPrompt;
setDefaultMessages();
public CinReader (String newPrompt, String [] newErrorMessages)
prompt = newPrompt;
if (newErrorMessages != null)
setErrorMessages(newErrorMessages);
else
setDefaultMessages();
public void setPrompt (String newPrompt)
prompt = newPrompt;
public void setErrorMessages (String [] newErrorMessages)
if (newErrorMessages != null)
int diff = errorMessages.length - newErrorMessages.length;
// NEED A MINIMUM OF 5 ERROR MESSAGES TO AVOID ERRORS
if (diff > 0)
errorMessages = new String[5];
for (int i=0; i<5; i++)
if (i < newErrorMessages.length)
errorMessages[i] = new String(newErrorMessages);
else
errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
else
errorMessages = newErrorMessages;
public void setErrorMessage (int idx, String msg)
if (idx >= 0 && idx < errorMessages.length)
errorMessages[idx] = msg;
public void setErrorMessageString (String msg)
errorMessages[STRING_MESSAGE] = msg;
public void setErrorMessageInt (String msg)
errorMessages[INT_MESSAGE] = msg;
public void setErrorMessageDouble (String msg)
errorMessages[DOUBLE_MESSAGE] = msg;
public void setErrorMessageChar (String msg)
errorMessages[CHAR_MESSAGE] = msg;
public void setErrorMessageBoolean (String msg)
errorMessages[BOOLEAN_MESSAGE] = msg;
public String readString()
char theChar = 'x';
String result = "";
boolean done = false;
while (!done)
theChar = nextChar();
if (theChar == '\n')
done = true;
else if (theChar == '\r'){}
else
result = result + theChar;
return result;
public String readString (boolean allowEmpty)
String result = readString();
if (!allowEmpty)
while (result.length() == 0)
System.out.println("Empty input not allowed. " + errorMessages[STRING_MESSAGE]);
System.out.print(prompt);
result = readString();
return result;
public String readString (int charLimit)
String result = readString();
if (result.length() > charLimit)
result = result.substring(0, charLimit);
return result;
public String readString (boolean allowEmpty, int charLimit)
String result = readString(allowEmpty);
if (result.length() > charLimit)
result = result.substring(0, charLimit);
return result;
public int readInt()
String inputString = "";
int number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Integer.valueOf(inputString).intValue());
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
System.out.print(prompt);
return number;
public int readInt(int min, int max)
String inputString = "";
int number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Integer.valueOf(inputString).intValue());
if (number < min || number > max)
System.out.println("Please enter an integer between " + min + " and " + max);
else
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
System.out.print(prompt);
return number;
public double readDouble()
String inputString = "";
double number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Double.valueOf(inputString).doubleValue());
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[DOUBLE_MESSAGE]);
System.out.print(prompt);
return number;
public char readChar()
boolean done = false;
String inputString = "";
char nonWhite = 'x';
while (!done)
inputString = readString();
inputString = inputString.trim();
if (inputString.length() != 1)
System.out.println("Input must be a single character. " + errorMessages[CHAR_MESSAGE]);
System.out.print(prompt);
else
nonWhite = (inputString.charAt(0));
done = true;
return nonWhite;
public char readChar (String range)
char theChar = 'x';
boolean done = false;
while (!done)
theChar = readChar();
for (int i=0; i<range.length(); i++)
if (theChar == range.charAt(i))
done = true;
break;
if (!done)
System.out.print("Invalid input. Please enter one of the following -> ");
for (int i=0; i<range.length(); i++)
System.out.print(range.charAt(i) + " ");
System.out.print("\n" + prompt);
return theChar;
public boolean readBoolean()
boolean done = false;
String inputString = "";
boolean result = false;
while (!done)
inputString = readString(false);
inputString = inputString.trim();
if (inputString.equalsIgnoreCase("true") || inputString.equalsIgnoreCase("t"))
result = true;
done = true;
else if (inputString.equalsIgnoreCase("false") || inputString.equalsIgnoreCase("f"))
result = false;
done = true;
else
System.out.println("Input must be [t]rue or [f]alse. " + errorMessages[BOOLEAN_MESSAGE]);
System.out.print(prompt);
return result;
private void setDefaultMessages ()
errorMessages = new String[5];
for (int i=0; i<errorMessages.length; i++)
errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
private char nextChar()
int charAsInt = -1;
try
charAsInt = System.in.read();
catch(IOException e)
System.out.println(e.getMessage());
System.out.println("Fatal error. Exiting program.");
System.exit(0);
return (char)charAsInt;Ok, here's what I did using the JSE 8.1 IDE.
1) I copied your code into a .java file named "TextShuffleGame".
It generated about half a dozon errors.
There are three classes in the program:
TextShuffleLevel
TextShuffleGame
CinReader
Each of these classes is declared "public" and I got the same error message on each one:
"class ... is public, should be declared in a file name ... .java"
so, I...
2) tried changing them to "private".
It then said: "modifier private not allowed here".
so, I...
3) deleted the modifiers for these three classes and left them as just class. No errors.
The next two errors had to do with the two import statements:
"import java.io.*;" and "import java.util.*;".
It said: "'class' or 'identifier' expected" for both. So, I...
4) moved them to the top of the source file.
Didn't help at first. So, I...
5) fiddle around with them a bit.
I tried "java.io;" and "java.util;" and then "java.*;" by itself. Still got errors. So, I put them back as you had them and for some mysterious reason, my editor decided they were fine. oO
This also corrected the last errors in the "CinReader" class. Here is the error-free code I now have in my "TextShuffleGame.java" file:
import java.io.*;
import java.util.*;
class TextShuffleLevel
private String jumble;
private String [] matchString;
public TextShuffleLevel ()
jumble = "dunops";
matchString = new String[5];
matchString[0] = new String("abound");
matchString[1] = new String("bound");
matchString[2] = new String("undo");
matchString[3] = new String("band");
matchString[4] = new String("bond");
public TextShuffleLevel (int whichDefaultLevel)
if (whichDefaultLevel == 1)
jumble = "dunops";
matchString = new String[5];
matchString[0] = new String("abound");
matchString[1] = new String("bound");
matchString[2] = new String("undo");
matchString[3] = new String("band");
matchString[4] = new String("bond");
else if (whichDefaultLevel == 2)
jumble = "srcaso";
matchString = new String[11];
matchString[0] = new String("across");
matchString[1] = new String("crass");
matchString[2] = new String("cross");
matchString[3] = new String("scars");
matchString[4] = new String("soars");
matchString[5] = new String("arcs");
matchString[6] = new String("soar");
matchString[7] = new String("scar");
matchString[8] = new String("oars");
matchString[9] = new String("cars");
matchString[10] = new String("orcs");
else
jumble = "eplcis";
matchString = new String[19];
matchString[0] = new String("splice");
matchString[1] = new String("spiel");
matchString[2] = new String("plies");
matchString[3] = new String("slice");
matchString[4] = new String("clips");
matchString[5] = new String("epics");
matchString[6] = new String("spice");
matchString[7] = new String("epic");
matchString[8] = new String("lice");
matchString[9] = new String("slip");
matchString[10] = new String("clip");
matchString[11] = new String("pile");
matchString[12] = new String("lisp");
matchString[13] = new String("pies");
matchString[14] = new String("isle");
matchString[15] = new String("lips");
matchString[16] = new String("lies");
matchString[17] = new String("ices");
matchString[18] = new String("pics");
public TextShuffleLevel (String newJumble, String [] newMatchString)
jumble = newJumble;
matchString = newMatchString;
/* This is the nasty one */
public boolean findMatch (String matchTry)
boolean foundMatch = false;
for (int i=0; i<matchString.length; i++)
if (matchTry.equalsIgnoreCase(matchString))
foundMatch = true;
break;
return foundMatch;
public void setJumble (String newJumble)
jumble = newJumble;
public void setMatchStrings (String [] newMatchString)
matchString = newMatchString;
public String getJumble ()
return jumble;
public int getJumbleLength ()
return jumble.length();
public int getNumberOfMatches ()
return matchString.length;
public String[] getMatchString ()
return matchString;
class TextShuffleGame
private int playerLevel = 1; // start them on level 1
private CinReader reader;
private TextShuffleLevel l1;
private TextShuffleLevel l2;
private TextShuffleLevel l3;
private TextShuffleLevel onTheFly;
public TextShuffleGame ()
reader = new CinReader();
// Using Statically Set Levels
l1 = new TextShuffleLevel(1);
l2 = new TextShuffleLevel(2);
l3 = new TextShuffleLevel(3);
// this one allows for a 'custom' level
String fly[] = {"tea","at", "ate"};
onTheFly = new TextShuffleLevel("eta", fly);
//Setup for levels
public void go ()
boolean quit = false;
char choice = 'z';
int lastLevel = 0;
while (quit == false)
lastLevel = playerLevel;
if (playerLevel == 1)
play(l1);
else if (playerLevel == 2)
play(l2);
else if (playerLevel == 3)
play(l3);
else
play(onTheFly);
if (lastLevel == playerLevel)
System.out.print("Play the level again");
else
System.out.print("Play next level");
System.out.print("(y/n)? ");
choice = reader.readChar();
if (choice == 'N' || choice == 'n')
quit = true;
//Playing each level the same
public void play (TextShuffleLevel theLevel)
int numGuesses = 0;
int numCorrect = 0;
String userString = "";
System.out.println("What " + theLevel.getJumbleLength() + "-letter words can you get out of " +
theLevel.getJumble() + "?\n");
while (numGuesses < 5 && numCorrect < theLevel.getNumberOfMatches())
System.out.print("Enter a string: ");
userString = reader.readString();
if (theLevel.findMatch(userString) == true)
System.out.println("Great! A match!");
numCorrect = numCorrect + 1;
else
System.out.println("Drat... not a match");
numGuesses = numGuesses + 1;
if (numCorrect == theLevel.getNumberOfMatches())
System.out.println("Terrific! You are ready to try a harder jumble");
playerLevel = playerLevel + 1;
/* FOR TESTING ONLY -- TO BE REMOVED FOR RELEASE */
public static void main (String [] args)
TextShuffleGame tsg = new TextShuffleGame();
tsg.go();
class CinReader
private static final int INT_MESSAGE = 0;
private static final int DOUBLE_MESSAGE = 1;
private static final int CHAR_MESSAGE = 2;
private static final int STRING_MESSAGE = 3;
private static final int BOOLEAN_MESSAGE = 4;
private static final String DEFAULT_ERROR_MESSAGE = "Please reenter. ";
private String prompt = "> ";
private String [] errorMessages;
public CinReader ()
prompt = "> ";
setDefaultMessages();
public CinReader (String newPrompt)
prompt = newPrompt;
setDefaultMessages();
public CinReader (String newPrompt, String [] newErrorMessages)
prompt = newPrompt;
if (newErrorMessages != null)
setErrorMessages(newErrorMessages);
else
setDefaultMessages();
public void setPrompt (String newPrompt)
prompt = newPrompt;
public void setErrorMessages (String [] newErrorMessages)
if (newErrorMessages != null)
int diff = errorMessages.length - newErrorMessages.length;
// NEED A MINIMUM OF 5 ERROR MESSAGES TO AVOID ERRORS
if (diff > 0)
errorMessages = new String[5];
for (int i=0; i<5; i++)
if (i < newErrorMessages.length)
errorMessages[i] = new String(newErrorMessages[i]);
else
errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
else
errorMessages = newErrorMessages;
public void setErrorMessage (int idx, String msg)
if (idx >= 0 && idx < errorMessages.length)
errorMessages[idx] = msg;
public void setErrorMessageString (String msg)
errorMessages[STRING_MESSAGE] = msg;
public void setErrorMessageInt (String msg)
errorMessages[INT_MESSAGE] = msg;
public void setErrorMessageDouble (String msg)
errorMessages[DOUBLE_MESSAGE] = msg;
public void setErrorMessageChar (String msg)
errorMessages[CHAR_MESSAGE] = msg;
public void setErrorMessageBoolean (String msg)
errorMessages[BOOLEAN_MESSAGE] = msg;
public String readString()
char theChar = 'x';
String result = "";
boolean done = false;
while (!done)
theChar = nextChar();
if (theChar == '\n')
done = true;
else if (theChar == '\r'){}
else
result = result + theChar;
return result;
public String readString (boolean allowEmpty)
String result = readString();
if (!allowEmpty)
while (result.length() == 0)
System.out.println("Empty input not allowed. " + errorMessages[STRING_MESSAGE]);
System.out.print(prompt);
result = readString();
return result;
public String readString (int charLimit)
String result = readString();
if (result.length() > charLimit)
result = result.substring(0, charLimit);
return result;
public String readString (boolean allowEmpty, int charLimit)
String result = readString(allowEmpty);
if (result.length() > charLimit)
result = result.substring(0, charLimit);
return result;
public int readInt()
String inputString = "";
int number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Integer.valueOf(inputString).intValue());
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
System.out.print(prompt);
return number;
public int readInt(int min, int max)
String inputString = "";
int number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Integer.valueOf(inputString).intValue());
if (number < min || number > max)
System.out.println("Please enter an integer between " + min + " and " + max);
else
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
System.out.print(prompt);
return number;
public double readDouble()
String inputString = "";
double number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Double.valueOf(inputString).doubleValue());
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[DOUBLE_MESSAGE]);
System.out.print(prompt);
return number;
public char readChar()
boolean done = false;
String inputString = "";
char nonWhite = 'x';
while (!done)
inputString = readString();
inputString = inputString.trim();
if (inputString.length() != 1)
System.out.println("Input must be a single character. " + errorMessages[CHAR_MESSAGE]);
System.out.print(prompt);
else
nonWhite = (inputString.charAt(0));
done = true;
return nonWhite;
public char readChar (String range)
char theChar = 'x';
boolean done = false;
while (!done)
theChar = readChar();
for (int i=0; i<range.length(); i++)
if (theChar == range.charAt(i))
done = true;
break;
if (!done)
System.out.print("Invalid input. Please enter one of the following -> ");
for (int i=0; i<range.length(); i++)
System.out.print(range.charAt(i) + " ");
System.out.print("\n" + prompt);
return theChar;
public boolean readBoolean()
boolean done = false;
String inputString = "";
boolean result = false;
while (!done)
inputString = readString(false);
inputString = inputString.trim();
if (inputString.equalsIgnoreCase("true") || inputString.equalsIgnoreCase("t"))
result = true;
done = true;
else if (inputString.equalsIgnoreCase("false") || inputString.equalsIgnoreCase("f"))
result = false;
done = true;
else
System.out.println("Input must be [t]rue or [f]alse. " + errorMessages[BOOLEAN_MESSAGE]);
System.out.print(prompt);
return result;
private void setDefaultMessages ()
errorMessages = new String[5];
for (int i=0; i < errorMessages.length; i++)
errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
private char nextChar()
int charAsInt = -1;
try
charAsInt = System.in.read();
catch(IOException e)
System.out.println(e.getMessage());
System.out.println("Fatal error. Exiting program.");
System.exit(0);
return (char)charAsInt;
Hope that helps. -
I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2 -
I have adobe Creative cloud and it shows CC and CC (2014) for every program, if i try running (2014) I get an error that I need to login.
When I look at my adobe subscription it says Creative Cloud Free membership but I pay 49.95 a month for full access.
Why am I not able to use CC(2014).
If I pay the 49 monthly should I not get upgrades to all my apps instantly?
Please helpYou will see my monthly payment to Adobe and the reference for the payment.
Hi Kartikay,
I have been using my creative cloud for months with my email address [email protected] I am surprised you do not see it.
What can I do?
When I login all my programs open correctly except premiere cc 2014 -
Hio there Gurus
When am running f110 status showing Parameters have been entered, Payment proposal has been created, Payment run has been carried out and vendor line items have been cleared. However, there is a shortage in the amount of money that the vendor recieved. i've checked the following:
1. PO amount - no errors
2. Goods recieved - no errors
3. Involves - no errors
4. vendor line items - cleared for the correct amount
please help as i do not know where the problem lies.thanks.Hi,
Since you have already done the payment run, go to F110 and select the payment tab. You will get the job name for the payment run. Double click on the line and it will take you to the entries made.
Alternatively, you can run FBL1N report for the vendor and view the payment entry for the vendor. Double click on the line and go to the document overview.
In both the above cases, you will know from the accounting entry if any deduction has ben made at the time of F110.
Please revert for any clarification.
Thanks and Regards,
Anit -
Hi All,
I need help in Automatic payment run (F110). When I am giving the house bank and Account ID I am getting this error.
Bank data for house bank xyz been deleted
Message no. FZ 038
Diagnosis
Under the bank key specified for the house bank, no bank data could be determined.
System Response
The required processing cannot be carried out.
Procedure
Correct the bank key for the specified house bank or create the bank data for the presently valid key once more.
Thanks in advanceCheck your bank account and bank keys in FI12 and FI03 respectively.
Thanks
Ashok -
Error in F110 (Payment run 07/28/2011 1008I is intended for cross-payment )
Hi,
We are getting error in F110 Automatic Payment run.
Proposal and Payment run are getting created , But when we run the printout step it is giving the following error
1. Payment run 07/28/2011 1008I is intended for cross-payment run payment media FZ 110 S
2. No Record found
Please help me if any one has worked on same senario.
Thanks,
Babumiya MohammadHi Babumiya,
Please check FBZP setting for the payment run - Company Code , Country Code - for the corresoonding Payment method.
The form with driver program will trigger for the above combination ( as whatever is detailed out in FBZP transaction code).
While triggering the payment run, do check whether the standard job has been created or not (F110*).
Regards,
Anmol Saxena. -
Payment run error "No check exists which meets the selection criteria"
I have done a payment run successfully, maintained a variant for the check print program but when I want to display the cheques i get this error: " No check exists which meets the selection criteria"
I have mantained the check lot for the house bank and the ID as well.
What could be the problem? Please help.
Regards
DebraHi
I have checked FBZP t. code and the check lots , all seem to be in order. I still have not found out where the problem is.
Thanks Shammi
Regards
Debra -
Payment run error:Only clear down payment requests individually :DEFTAX 012
Hi ,
In the payment run, I get the error as "Only clear down payment requests individually"
The error code is DEFTAX 012 . What is the reason and solution. It seems to be a downpayment.
Please suggest the needful.
Regards
RudraCheck any of the following notes whether it helps you.
1) Note 1127049 - New deferred tax: DEFTAX025 when posting down payment clr.
2) Note 1154793 - Def.Tax: No Amounts in Local Currency; Wrong Amount Diff.
3) Note 1160939 - Deferred Tax: Error DEFTAX(023) for Payment of 2 DP Requests
thanks
G. Lakshmipathi
Maybe you are looking for
-
Connecting a WRT54G2 V1 to a ADSL Ovislink Modem router combo
I am trying to set up my linksy router to a ADSL Ovislink Modem router combo and when I install the CD on the main computer I keep getting this error message "Error 322- New router or gateway not detected" I have hooked everything up correctly as the
-
Image in a JDesktopPane background
Is it possible to paint an Image in a JDesktopPane background ?? how can I get it ?
-
What cable to buy to connect iPod to my stereo?
hello - i'm about to purchase iPod classic 120, and would like to know what cable i need to buy to be able to connect the iPod directly to my stereo + speakers, w/o having to run it through iTunes. i have an airport, and imagine there is a way to pla
-
How to create a User Trigger?
This trigger must be fired every hour for a user called SCOTT. And inside this trigger I want to write in this way (Trigger is on SCOTT/TIGER@DB1): connect scott/tiger@db2; drop table EMP; connect scott/tiger@db1; copy form scott/tiger@db1 tp scott/t
-
Itunes freezes when i try to log in in to my apple id :(
Itunes freezes when i try to log in in to my apple id(apple store) and it is not because of the update