Payment scheduling error in F110s

Hi all,
I have know idea about the t code F110s how to access the posting.
I want schedule the payment when i select all selection and Execute error will be coming
No accounts have been selected yet
Regards,
Seema

Hello Seema,
You will get that message because in vendor master General data-> payment transaction the ctry,bank key and bank account is not filled,and in company code data-> payment transaction give the payment method which you are using in f110,check the address is filled in vendor masetr dataand check in fbzp whether that payment method is assigned to your company code and check the rank order.
Go through this links it may help you:
F110-No valid Payment method Found
No valid payemnt method found.
Error Message F110: No valid payment method found
F110-Payment Run: No valid payment method found
Thanks
Edited by: Pavi Raju on May 13, 2011 11:17 AM

Similar Messages

Payment method error in F110

Hi All,
In F110 Payment run , I am getting error , no valid payment method found.I checked the vendor master data, payment method has been maintained there, and also all configuration is in place, as I run the payment run for the same vendor in Q system. its working absolutely fine, but the same is not working in P.
What could be the reason?

Hi Reema,
I also faced similar problem earlier. Following could be the reasons:(These worked for me)
1. The vendor is already picked up in an earlier run and that run is not fully processed.
2. The amount is not yet due
3. Sometimes, if the address in the vendor master is not fully updated, it fails to pick it up. This usually happens if you have enabled jurisdiction codes etc
Hope this helps
Regards,

Error in( F110) Automatic payment Program

Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank you

Hi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard

F110 - PAYMENT RUN ERRORS

Hio there Gurus
When am running f110 status showing Parameters have been entered, Payment proposal has been created, Payment run has been carried out and vendor line items have been cleared. However, there is a shortage in the amount of money that the vendor recieved. i've checked the following:
1. PO amount - no errors
2. Goods recieved - no errors
3. Involves - no errors
4. vendor line items - cleared for the correct amount
please help as i do not know where the problem lies.thanks.

Hi,
Since you have already done the payment run, go to F110 and select the payment tab. You will get the job name for the payment run. Double click on the line and it will take you to the entries made.
Alternatively, you can run FBL1N report for the vendor and view the payment entry for the vendor. Double click on the line and go to the document overview.
In both the above cases, you will know from the accounting entry if any deduction has ben made at the time of F110.
Please revert for any clarification.
Thanks and Regards,
Anit

Error in F110 (Payment run 07/28/2011 1008I is intended for cross-payment )

Hi,
We are getting error in F110 Automatic Payment run.
Proposal and Payment run are getting created , But when we run the printout step it is giving the following error
1. Payment run 07/28/2011 1008I is intended for cross-payment run payment media FZ 110 S
2. No Record found
Please help me if any one has worked on same senario.
Thanks,
Babumiya Mohammad

Hi Babumiya,
Please check FBZP setting for the payment run - Company Code , Country Code - for the corresoonding Payment method.
The form with driver program will trigger for the above combination ( as whatever is detailed out in FBZP transaction code).
While triggering the payment run, do check whether the standard job has been created or not (F110*).
Regards,
Anmol Saxena.

Multiple Payment Methods problem in F110 - Parameters

<b>Prob : Wehn I enter more than one payment method in Parameters in F110 only the 1st Payment method entered is saved. The other payment method gets deleted automatically.</b>
Following is already done :
1. All the payment methods entered in F110 Parameters is already maintained in
the vendor master.
2. In FBZP - Payment Method for Country & Payment Method for Company Code
is configured for all the payment methods.
3. Also Invoices in FI (FB60) are posted for all the payment methods without any
errors.
4. Ranking order is maintained for each payment method & for the house bank
used.
5. Account determination is also maintained for all the payment methods for the
respective house bank.
6. The maximum amount is also maintained for all the payment methods under "Payment Methods for Comapany Code".
Pl help to resolve this problem.

hi,
My problem is in the parameter stage 1st Screen.
Also you cannot assign more than one Payment Method in the Print Variant.
Also this variant is used only for printing. Its not called at the stage when I am entering the Payment Method in the 1st screen in the Parameter.
I have somewhat found out what the problem is.
I guess there is some change done in the standard SAP program, becuase if i type more than one payment method in the Parameter 1st screen and try to save it, it returns with a warning message "Only one Payment Method can be entered". This is a unique msg which has been written through a Z Program.
Thanks.
Bye.

Error in F110 -Balance not zero

This is the error in F110:
Job started
Step 001 started (program SAPF110S, variant &0000000091241, user ID INDFIOAM)
Log for payment run for payment on 04.04.2011, identification SEG9T
Internal error: doc.balance not zero / comp.code 0685 vendor G690 customer
Balances:            0,04 MXN /            0,00 USD
>
>            Posting documents additional log
> Document company code 0685 currency USD payment method T
> LIt PK Acct         RA            Amount            Tax
>
> 001 29 G690                    33.990,87              0,00          405.137,18              0,00
> 002 50 0475141000               8.497,72              0,00          101.284,29              0,00
> 003 50 0573097D11              25.493,15              0,00          303.852,85              0,00
>
Information re. vendor G690 / paying company code 0685 ...
... payment not possible because of reported error
End of log
Job finished

Dear La pequena,
please check, on the base of Your SAP Release, and apply the following notes:
1578928
1557883
1488637
1433884
1422932
1408793
1401523
1401389
1376505
1321546
1317395
1304847
1298483
I hope this helps.
Mauri

Payment Proposal error in F111

Hello,
We recieve the below error in the proposal.
the parameters are ,US01 company code, U- payment method.
First we create payment request in Treasury system with tcode : RVND in curr INR then run f111.
INR is also specified in FBZP for payment method U.
When we use any other foreing curr the payment is successful with the same payment method and same house bank
Please advice.
Thanks very much.
ERROR
Company codes US01/US01 do not appear in proposal 11/24/2009 INR-1R; correct
Message no. FZ 003
Diagnosis
No data exists for the specified paying company code US01 and the specified sending company code US01 in payment proposal 11/24/2009 INR-1R.
System Response
The payment proposal cannot be edited.
Procedure
Check the flow trace and payment proposal list in order to determine why the specified company codes are not contained in the proposal.

Hi,
Did you try this?
Call up the Payment Program for Payment Requests (F111). Choose Environment ® Maintain Configuration to make your Customizing settings for the payment program.
Activities
To start a payment run, call the Payment Program for Payment Requests (F111). The Automatic Payment Transactions for Payment Requests screen appears.
       1.      Enter a date and payment run ID.
All information relating to the payment run is stored under these values.
       2.      Choose Edit ® Parameters ® Maintain Payment Run Parameters. The Automatic Payment Transactions: Parameters screen appears.
Enter the values for the parameters.
       3.      TheDynamic selections function gives you the option of using other fields for selecting payment requests.
       4.      You can create an additional log by choosing Additional Log.
       5.      Save the parameters for the payment run.
       6.      To generate a proposal run or a payment run, choose Edit ® Proposal ® Schedule or Edit ® Payment ® Schedule.
Specify a starting time (or immediate start) and a computer, if required.
       7.      If you create a proposal, you can display the log, payment list and exception list. You can edit or delete the payment proposal. If you are satisfied with this payment proposal, choose Edit ® Payment ® Schedule and execute the update run.
       8.      After the payment run, the system generates the posting documents, the payment and exceptions lists, and the payment media.
Let me know if you are still facing an issue.

IDOC error after F110

Could someone throw some light on this kinda error after F110 Payment run.The error says IDoc type could not be determined for the IDoc
Should I check anything in House Bank Determination.? Please help me resolve this.
Thanks
G

Hi Murali,
I need to Create IDOC as soon as F110 transaction is run.
In FI12 i have done Partner Profile configuration, and in WE20 i have created the Partner Profile sith PEYEXT-->PEXR2002.
But i couldn't see any IDOC created?
Please give me your answer / process on this
It is very urgent
Thanks
Manju

Process of payment scheduling.

hi,
I want to understand what is a process of payment scheduling and where we set and which type payment schedul we use in SAP setup .
Seema
Edited by: seemacg on Mar 4, 2011 6:29 AM

Hi seema,
As posted by SAPFICO it can be scheduled in f110s. This is for scheduling a job in future. You can give the run date on which u want to execute. Other parameters are same as it appears in f110. This is basically used for schedulling a payment due in future. You can check in sm37 tge status of the schedule run.
Regards

Power BI Scheduling Error

Hi,
I am getting the following scheduling error for the report which I ceated using Power Query and publish on O365. If anyone has any insight on the same please help.
I am trying to pull the data from Sharepoint list into excel for the report
Refresh on demand
We're sorry. We can't open the workbook in the browser because it uses these unsupported features: • SharePoint lists
Correlation ID:
a9fc9d7f-95d7-43e9-90e4-c6d9fb65531e
Thanks
Mohammed

Are you pulling data from SharePoint List using Power Query?
As of now SharePoint List is not not supported datasource for scheduled refresh on O365.
Only SQL Server is supported right now.
Thanks,
Sagar K
(Blog: http://datamazik.blogspot.in/)

Just got a new Samsung laptop. Windows 7, . Downloaded and installed Itunes 10.6.3. Now every time i try to open Itunes, I get BSOD and a Veido Scheduler error message. Anyone else heard of this problem ?

Running Windows 7 on a new Samsung Series 7 laptop. Downloaded latest Itunes 64 bit and installed. Now, when i try to run Itunes, I get BSOD and a video scheduler error message

Running Windows 7 on a new Samsung Series 7 laptop. Downloaded latest Itunes 64 bit and installed. Now, when i try to run Itunes, I get BSOD and a video scheduler error message

Payment verify error!

I play KABAM / Hobbit app on an I-pad and I-phone daily. Mid game gold purchase on I-pad the app crashed (diff issue) and purchase transaction did not go through. Now, every time I open the game I'm asked for my apple I'd and password... then iget message " Payment verify error!"... close that and then I can play.
It's very irritating... I don't care about the 50 gold I never got... I just want to not have to sigh in in every time I open this app. I have a lot of $$$ invested in it and I would hate to loose it all... so I'm chicken to delete app without first asking the question. Any insite into this would be appriciated! Thx

I have this problem as well. I can make purchases but it is really annoying that I have to enter my account password twice and verify my payment information for every purchase I make.

Payment execution error

HI
         this is maqdoom ali
I getting error while go to the execution of payment terms error no f5413.
Best Regrt
NASERK.

Hi,
Define this message as Warning by OBA5. If it isn't allowed go first into OBMSG.
Regards

AP:selected payment schedules report "Credit reduces payment amount below

Hi all:
I have a PPR reject one Debit memo with reason "Credit reduces payment amount below zero" at first and shows out in report "selected payment schedules report" as Unselected Scheduled Payments.
PPR Pay through date: 28-Nov-2011
Issued Debit Memo date: 28-Oct-2011.
But when change the Pay through date of PPR to 28-Nov-2012.
Then this issued Debit Memo can be selected and processed.
Any idea about this issue?
Your reply will be very appreciated.
Thank you
Beryl
Edited by: user10937857 on Dec 13, 2011 1:40 AM
Edited by: user10937857 on Dec 13, 2011 7:01 PM

Hi:
Thank you for your kindly reply.
I have already checked these 3 notes. for the setup one, customer has checked ,the setup is correct.
For the other patch solution notes.
If this issue is a bug issue, then why when they extend the PPR Pay through date to next year, then this Credit memo can be selected and processed?
Confusing.
Any idea about this?
Thank you very much

Payment scheduling error in F110s

Similar Messages

Maybe you are looking for